NEW AREAS OF PHYSICS INQUIRY WITH REGARDS TO THE SCIENTIFIC DISCOVERIES MADE DURING THE DEVELOPMENT OF THE US Patented ReGenX GENERATOR AND
BI-TOROID TRANSFORMER INVENTIONS
Preface Overview
In 2007 it was discovered that the negative effects associated with Lenz's Law could actually be reversed in electric generator performance and a positive effect could be produced in its place.
Several new scientific revelations have followed as a result of this discovery.
The 1st revelation was that, the “equal and opposite reaction” as dictated by Newton's Third Law in Faraday's Law of Induction via Lenz's Law could now be replaced with an “equal and complementary reaction” via a new law of physics called Heins' Law.
The 2nd revelation revealed that, Lenz's Law had been successfully circumvented and Faraday's Law of Induction now required re-evaluation and rewriting to include this new discovery and a positive sign rather than a negative sign in Faraday's Law.
The 3rd revelation was that, Newton's Third Law and the Law of Conservation of Energy were also circumvented and the wisdom of including Electricity and Magnetism under the umbrella of Newtonian Mechanics by our early scientists was put into question.
The 4th revelation was that, an electric generator which accelerated itself under load instead of decelerating itself, which required no mechanical input power increase while generating electricity was not converting mechanical input power to electrical output power and was operating at infinite efficiency.
The 5th revelation was that, an electric generator which could perform Positive Work, increasing its own Kinetic Energy while simultaneously supplying electric power to a load meant that induced magnetic fields are a form of energy which performs work and that this energy is created.
The 6th revelation was that, electric motors which currently purport to convert electrical input power to mechanical output power can now be viewed with this new perspective, as basically just induction heaters which only have the ability to convert input electric energy to heat output energy - when induced magnetic fields are correctly identified as a form of energy and this energy source actually performs the mechanical work in an all electric motors at infinite efficiency according to the Power Rule and the Work-Energy Principle.
1. NEW AREAS OF PHYSICS INQUIRY WITH REGARDS TO THE SCIENTIFIC DISCOVERIES
MADE DURING THE DEVELOPMENT OF THE US Patented ReGenX GENERATOR AND
BI-TOROID TRANSFORMER INVENTIONS
2. NEW AREAS OF PHYSICS INQUIRY WITH REGARDS TO THE SCIENTIFIC DISCOVERIES
MADE DURING THE DEVELOPMENT OF THE US Patented ReGenX GENERATOR AND
BI-TOROID TRANSFORMER INVENTIONS
Preface Overview
In 2007 it was discovered that the negative effects associated with Lenz's Law could actually be reversed in electric
generator performance and a positive effect could be produced in its place.
Several new scientific revelations have followed as a result of this discovery.
The 1st revelation was that, the “equal and opposite reaction” as dictated by Newton's Third Law in Faraday's Law of
Induction via Lenz's Law could now be replaced with an “equal and complementary reaction” via a new law of physics
called Heins' Law.
The 2nd revelation revealed that, Lenz's Law had been successfully circumvented and Faraday's Law of Induction now
required re-evaluation and rewriting to include this new discovery and a positive sign rather than a negative sign in
Faraday's Law.
The 3rd revelation was that, Newton's Third Law and the Law of Conservation of Energy were also circumvented and
the wisdom of including Electricity and Magnetism under the umbrella of Newtonian Mechanics by our early scientists
was put into question.
The 4th revelation was that, an electric generator which accelerated itself under load instead of decelerating itself,
which required no mechanical input power increase while generating electricity was not converting mechanical input
power to electrical output power and was operating at infinite efficiency.
The 5th revelation was that, an electric generator which could perform Positive Work, increasing its own Kinetic
Energy while simultaneously supplying electric power to a load meant that induced magnetic fields are a form of
energy which performs work and that this energy is created.
The 6th revelation was that, electric motors which currently purport to convert electrical input power to mechanical
output power can now be viewed with this new perspective, as basically just induction heaters which only have the
ability to convert input electric energy to heat output energy - when induced magnetic fields are correctly identified
as a form of energy and this energy source actually performs the mechanical work in an all electric motors at infinite
efficiency according to the Power Rule and the Work-Energy Principle.
3. Research Background History – Reducing the Negative Effects of Lenz's Law
The ReGenX Generator investigation began in 1999 as an exploration into how the negative effects associated with
Lenz's Law (Negative Work being performed by the Counter Electromagnetic Torque produced by the induced
electromagnetic fields created inside electric generators) could be mitigated in electric power generation in order to
increase overall electricity generation efficiency.
Lenz's Law states that:
“An induced electromotive force (emf) always gives rise to a current
whose magnetic field opposes the change in original magnetic flux.”
The initial goal was to reduce prime mover energy consumption in electricity generation; to develop ways to reduce
the negative effects of Lenz's Law by 5 – 10% - by physically diverting a portion of the induced electromagnetic fields
out of the air gap from between the generator coil and the generator's main rotating magnetic field.
In 2007 it was discovered that the negative “opposing” effects associated with Lenz's Law could actually be reversed
when the generator coil's induced current is delayed in the time domain and a positive assisting effect could be
introduced in its place.
The delayed current and the subsequent delayed magnetic field produced
in the ReGenX Generator, assisted the change in original magnetic flux.
Instead of diverting the induced electromagnetic fields out of the air gap in order to mitigate their negative effects
(Negative Work resulting in system deceleration and reduced system Kinetic Energy), it was discovered that by
delaying the load current sufficiently in the time domain, these induced electromagnetic fields would also be delayed
and a Complementary Electromagnetic Torque could actually be produced and would perform Positive Work,
accelerating the system and increasing its Kinetic Energy.
4. In 2013 the ReGenX Generator's Load Current Delay was identified:
ReGenX Generator Load Current Delay
REVERSING Generator Armature Reaction / Motor Action
in a Generator:
https://youtu.be/pyO8FUTDX68
5. Induced Magnetic Fields, Created Energy, Performing Negative Work
The early scientific community's confusion with the similarities between Lenz's Law and Newton's Third Law are
understandable. However this same confusion has existed for almost 200 years now.
In electric generator performance in the early 1800's, Lenz's Law would have seemed to completely confirm and
validate Newton's Third Law in Electro-Mechanics.
However today when we apply the Work-Energy Principle to Lenz's Law and when we substitute the word “opposes”
with “performs Negative Work” the errors made by our early scientist pioneers become self evident.
The following slide shows an expanded explanation of Lenz's Law, taking into consideration the Work-Energy Principle
and the requirement for an energy source to be present when work is being performed in any direction.
The standard Lenz's Law explanation is:
“An induced electromotive force (emf) always gives rise to a current
whose magnetic field opposes the change in original magnetic flux.”
6. Expanded explanation of Lenz's Law
employing the Work-Energy Principle
The standard Lenz's Law definition uses the
word “opposes” to denote negative work
being performed by induced
electromagnetic fields.
The words “opposes” and “performs
negative work” are interchangeable.
And since all work in any direction requires
energy, the induced electromagnetic fields
are a form of energy that is created.
“An induced electromotive force (emf)
always gives rise to a current whose
magnetic field opposes the change in
original magnetic flux.”
7. Induced Magnetic Fields, Created Energy,
Performing Positive Work
When the ReGenX Generator's Load Current
Delay and the Positive Work performed by the
created Magnetic Field Energy is understood it
gives rise to a new law of physics.
The requirements as dictated by Lenz's Law,
Newton's Third Law and the Law of Conservation
of Energy and the subsequent mechanical input
supply increase requirement during electricity
generation was removed from the electricity
generation equation by Heins' Law.
8. Lenz's Law and the Negative Work performed by the created Magnetic Field Energy is denoted by the
minus sign in Faraday's Law:
Heins' Law and the Positive Work performed by the created and time delayed Magnetic Field Energy
is denoted by the positive sign in Faraday's Law:
9. Positive Work being Performed by
Created Magnetic Field Energy in a
Bi-Toroid Transformer
The simple Bi-Toroid Transformer video
below demonstrates how created
electromagnetically induced Magnetic
Field Energy can be used to perform
work in a transformer:
Video - Bi-Toroid Transformer
Operation Example:
https://youtu.be/UbKr7aYKSPU
The induced electromagnetic field
energy which is created in secondary
coil 1 is delivered to secondary coil 2
and vice versa and together they
provide the energy required to power
the loads.
10. Positive Work being Performed in a Motor Coil by Created Magnetic Field Energy
When we apply the Law of Conservation of Energy which states that, “energy can only be converted from one form to
another” to an inductor, solenoid or motor coil in an electric circuit in concert with the Power Rule, we can determine
the exact amount of electric input energy that is being converted to heat due to Joule heating in that motor coil /
circuit element.
Power Rule: P = I × V
If a current I flows through through a given element in a circuit, losing voltage V in the process, then the power
dissipated as heat by that circuit element is the product of that current and voltage: P = I ×V.
For example; if we have a motor coil which has a DC resistance of 0.5 Ohms and and 12 Volts DC are applied across
it, we can use Ohm's Law and the Power Rule to determine the amount of electricity which is being converted to heat
and dissipated by the coil.
P = V^2 / R
P = 12^2 / 0.5
P = 288 Watts
A motor coil with 0.5 Ohms of resistance with 12 Volts DC applied to it will convert 288 Watts of electricity to heat at
100% efficiency.
The question is, if 100% if the input energy which is supplied to a motor coil is being converted and dissipated as
heat – what is producing the mechanical output and the work performed by the motor coil?
The answer is, the work performed in an all electric motors is being performed at infinite efficiency by Magnetic Field
Energy which is being created.
12. Positive Work being Performed in Michael Faraday's Electric
Motor Coil by Created Magnetic Field Energy at Infinite
Efficiency
If we evaluate Michael Farady's original electric motor prototype and
we monitor the voltage applied to the wire and we measure the
resistance of the wire-mercury circuit we can deduce the exact
amount of electric energy being converted and dissipated as heat
due to Joule heating.
If we apply a specified voltage to the wire-mercury element with no
magnet present in the mercury bath we will convert and dissipate a
certain amount of heat which we can measure accurately.
By applying the Power Rule we can deduce mathematically and
measure empirically exactly how much power is being dissipated
with no magnet present and no motor action activity.
When we introduce the magnet into the mercury bath we will
observe motor action and a change (increase) in the Kinetic Energy
of the wire as it rotates around the magnet.
The power being dissipated in the wire-mercury element as heat will
remain unchanged in both cases.
This will lead us to the conclusion that electric motors do not
convert electrical input to mechanical output.
Electric motors only have the capacity to convert electric input to
heat which they do at 100% efficiency.
Radiated heat does not produce the mechanical output in electric
motors.
The mechanical output delivered by an electric motor is provided at
infinite efficiency by magnetic field energy which is created around
the current bearing wire.
14. EXPOSING HUMANITY'S GREATEST FALSEHOOD AND PRESENTING OUR GREATEST TRUTH...
https://www.linkedin.com/pulse/what-free-lunch-energy-can-being-created-right-under-our-heins-/
SO WHO'S TO BLAME FOR CLIMATE CHANGE? How about Sir Isaac Newton and Heinrich Lenz...
https://www.linkedin.com/pulse/so-whos-blame-climate-change-how-sir-isaac-newton-heinrich-heins-/
15. HOW TO GENERATE ELECTRICITY WITHOUT PRODUCING ANY POLLUTION DUE TO THE NEGATIVE WORK
PERFORMED BY LENZ'S LAW (NEWTON'S THIRD LAW)...
https://www.linkedin.com/pulse/world-introduction-heins-law-how-generate-infinite-amounts-heins-/
PART 1: THE KEY TO HOW EV REGENERATIVE BRAKING REALLY WORKS...
https://www.linkedin.com/pulse/one-ev-industry-knows-all-electric-vehicles-actually-create-heins-/
16. PART 2: THE KEY TO UNDERSTANDING ELECTRIC VEHICLE REGENERATIVE ACCELERATION
https://www.linkedin.com/pulse/part-2-one-single-person-entire-ev-industry-world-how-heins-/
HOW TO INNOVATE INDIA'S 1.2M AIR POLLUTION DEATHS TO ZERO ASAP.
https://www.linkedin.com/pulse/innovating-zero-energy-miracle-submission-mr-bill-gates-heins-/
17. CORRECTIONS to Michael Faraday's Electric Magnetic Rotation Apparatus (Motor) Experiment
https://www.slideshare.net/PDiCEOThaneHeins3240/3-corrections-to-michael-faradays-electric-magnetic-rotation-apparatus-motor-experiment