HOW CHINA AND RUSSIA CAN IMMEDIATELY INCORPORATE INFINITE EFFICIENCY ELECTRICITY GENERATION IN THEIR COUNTRIES - 中国和俄罗斯如何在各自国家立即实现无限高效发电 - КАК КИТАЙ И РОССИЯ МОГУТ НЕМЕДЛЕННО ВНЕСТИ БЕСКОНЕЧНУЮ ЭФФЕКТИВНОСТЬ ПРОИЗВОДСТВА ЭЛЕКТРОЭНЕРГИИ В СВОИХ СТРАНАХ Thane C. Heins President and CEO, Potential +/- Difference Inc. Clean-tech Research & Development Ottawa, Canada thaneh@potentialdifference.ca 613.293.1131

1. How to Eliminate...
100% the C02 and Air Pollution Produced
During Fossil-Fuel Electricity Generation,
100% of the Input Energy and
100% of the Financial Input Energy Cost
Required in ALL Electricity Generation
Until the End of Time
WHAT IF Generator Armature Reaction did not exist?
THEN...
NO Mechanical Input Energy would ever be required when generating electricity,
NO C02 and NO Air Pollution would ever be produced during fossil-fuel electricity
generation and NO Financial Input Energy Cost would ever be incurred during the
electricity generation phase.
AND the term Global Warming would NOT exist.
On February 28th
, 2008 MIT confirmed that Generator Armature Reaction could
be REVERSED and COMPLETELY ELIMINATED from the electricity generation
equation meaning:
NO Mechanical Input Energy is ever required when generating
any amount of electricity forever, and
NO C02 and NO Air Pollution will ever be produced,
during Fossil-Fuel electricity generation,
and NO Financial Input Energy Cost will ever be incurred during
the electricity generation phase.
AND the term Global Warming is NO LONGER relevant.
The End.

2. “Every new beginning comes from some other beginning's end.”
~ Seneca
Every electric generator since 1834 has required Mechanical Input Energy when generating electricity
because of ONLY ONE reason, and it is because of Generator Armature Reaction.
Generator Armature Reaction is a Counter-Electromagnetic-Torque that is produced inside every
electric generator when the generator is delivering electric power to a load. This Counter-
Electromagnetic-Torque is Negative Work which works against the Torque direction supplied by the
Prime Mover which turns the generator.
The more electricity generated the more input energy is required and the more C02 and air pollution is
produced...
IF GENERATOR ARMATURE REACTION DID NOT EXIST;
NO Mechanical Input Energy would ever be required when generating electricity,
NO C02 and NO Air Pollution would ever be produced during fossil-fuel electricity generation
and NO Financial Input Energy Cost would ever be incurred in the electricity generation phase.
AND the term Global Warming would NEVER have been invented.
In Electrical Engineering terms Generator Armature Reaction is also described as "Motor Action in a
Generator"
In Electricity and Magnetism Physics terms this activity is described in a law of physics called Lenz's
Law of Induction which is an extension of Faraday's Law of Induction - where a Negative Sign is
included in front of Faraday's Law.
Since 1834 Lenz's Law of Induction has been incorrectly associated with Newton's Third Law of Motion
which states that, "for every action there is an equal and opposite reaction."
Generator Armature Reaction is used colloquially in electric vehicle operation and is called "electric
vehicle regenerative braking."
Generator Armature Reaction is responsible for 100% of the C02 and air pollution which is produced
per year globally in fossil-fuel electricity generation (approximately 16,000 Trillion Watts of fossil-fuel
electricity generation).
Generator Armature Reaction is also responsible for 100% of the Financial Input Energy Cost
associated with generating all electricity globally.
IN 2007 POTENTIAL DIFFERENCE INC. DISCOVERED THAT GENERATOR ARMATURE REACTION
COULD BE REVERSED AND COMPLETELY ELIMINATED FROM THE ELECTRICITY GENERATION
EQUATION.

3. THIS DISCOVERY WAS VALIDATED BY THE LATE DR. ZAHN AT MIT IN 2008
AND THOUSANDS OF TIMES SINCE.
This discovery now meant that NO Mechanical Input Energy is ever required
when generating any magnitude of electricity forever.
NO C02 and NO Air Pollution will ever be produced during fossil-fuel electricity generation
and NO Financial Input Energy Cost would ever be incurred in the electricity generation phase
NO Human Mortality will be caused by the air pollution which is normally produced during
until the end of time.
Fossil-fuel powered electricity generation AND the term Global Warming is no longer relevant.
“I saw it. It's real. Now I'm just trying to figure it out.
To my mind it is unexpected and new, and it''s worth exploring all the possible advantages
once you're convinced it's a real effect."
Markus Zahn, Ph.D. MIT Professor of Electromagnetics and Electrical Systems 2008
Removing Generator Armature Reaction from the Electricity Generation Equation in 2007 meant
that:
• the yearly 16,000 Trillion Watts of electricity generation which requires a minimum of 16,000
Trillion Watts of Input Power every year could now be reduced to 0.00 Watts of Input Power
every year forever.
• 100% of the Financial Input Energy Cost associated with all global electricity generation could
now be reduced to $0.00 every year forever.
• 100% of all human mortality which results from fossil-fuel electricity generation could now be
eliminated forever.
• And the Climate Change Crisis which did not even exist in 2007 could be averted before it even
began.
• The Earth's finite fossil-fuel reserves have an extended life span of more than 500%.
How to Reverse and Eliminate Generator Armature Reaction from Electricity Generation:
In 2007 it was discovered that when the generator's Load Current was Delayed Sufficiently in the Time
Domain;
1. Generator Armature Reaction could be reversed and eliminated,
2. the Negative Work or system Kinetic Energy reduction could be reversed and
3. Positive Work or system Kinetic Energy increase could be produced in its place.

4. This posed a very serious problem because Newton's First Law, the Work-Energy Principle and the
theory of conservation of energy all state that any change or increase in Kinetic Energy of a body or
system must be accompanied by Externally Supplied Input Energy which obviously was not the case.
The Work-Energy Principle, Newton's First Law and the theory of conservation of energy ALSO all state
that the Kinetic Energy DECREASE of a body or system must also be accompanied by Externally
Supplied Input Energy.
Positive and Negative Work both require an Externally Supplied Input Energy Source in order to satisfy
Newton's First Law of Motion, the Work-Energy Principle and the theory of conservation of energy
because Energy is the Currency which is required in order to perform Work in any direction.
In late January of 2008 Potential Difference took its ReGenX Generator (Perepiteia) prototype to MIT
and asked Dr. Markus Zahn to explain why it was increasing its own Kinetic Energy and accelerating
itself when it was placed on-load while the Input Energy to the system was simultaneously decreasing
when it ought to be increasing according to Newton's First Law and the theory of conservation of
energy.
Dr. Zahn could not answer the question and agreed to help set up a research collaboration between
MIT, Dr. Habash and the University of Ottawa (Power Lab) in order to solve the mystery.
"Of course it accelerates... This represents several new chapters in physics,
that is why we are consulting MIT"
Riadh W.Y. Habash Professor PhD. P.Eng McLaughlin Research Chair in Energy and Health
Tyler Hamilton and the Toronto Star were following the story and they published a series of
deliberately provocative and misleading articles which asked if the discovery was a "perpetual motion
machine” even though they all knew the entire time that it was not.
Nevertheless, the Toronto Star's deliberately deceptive click-bait article was the second most read fake
news story for the Toronto Star in 2008 and it generated a lot of advertising revenue while forever
tainting Dr. Zahn's professional reputation and ruining the research collaboration between Dr. Zahn,
MIT, Ottawa University and Potential Difference Inc.
Potential Difference's satellite lab at the University of Ottawa was referred to as the “Perpetual Motion
Lab” by many faculty who vehemently refused to come for a demonstration even though all 600
professors were individually invited.
15 years later, neither Tyler Hamilton nor the Toronto Star have come forward to tell the truth.
In 2023 the truth is as follows...
The ReGenX Generator innovation operates with a Load Current Time Delay which Delays the
Creation and Externalization of the Electromagnetic Field Energy around the generator coil.

5. All conventional generator coils also operate with a Load Current Time Delay which is called the 5 Time
Constant Rise Time and they too violate Newton's First and Third Laws of Motion but the Time Delay is
so minute that it is considered insignificant.
The fact that Newton's First and Third Laws are violated in the process are also not considered relevant.
When the Frequency of Operation of the ReGenX Generator coil is increased, the Total Impedance (AC
Resistance) of the generator coil is also increased and at a specific Frequency of Operation called the
Critical Minimum Frequency the coil's Net Impedance chokes and restricts all current flow within the
coil and from the generator to the load.
Because current flow through the coil is eliminated (temporarily), the creation and externalization of
the Electromagnetic Field Energy around the coil is also eliminated (temporarily).
The generator coil (Inductor) which normally stores created Electromagnetic Field Energy around the
coil's exterior is eventually forced to store Energy inside the coil in the Electrostatic Field between the
coil's windings just like a Multi-Parallel Plate Capacitor where the Coil Windings are the Plates of the
Capacitor and the air between the Windings is the Dialectric.
At a specific Frequency of Operation the Parasitic Capacitance of the ReGenX Generator Coil (which is
negligible at lower frequencies) becomes Operationally Paramount and the coil operates as a Multi-
Parallel Plate Capacitor; storing energy inside the coil as Voltage and Current flow in the coil is
temporarily suspended as is the creation of the Electromagnetic Field Energy around the generator
coil.
The created Electromagnetic Field Energy's ability to perform Negative Work and decelerate the
generator rotating magnetic field as dictated by Faraday's Law and Lenz's Law of Induction is
suspended in the Time Domain.
Newton's Third Law of Motion is suspended and violated, as is Lenz's Law of Induction and the theory
of conservation of energy.
The Load Current Time Delay action violates Newton's First and Third Laws and the idea of Equal and
Opposite Force-Pairs.
"The ReGenX Generator's Load Current Time Delay violates Newton's Third Law
and the Law of Conservation of Energy because even an infinitesimal time
without the second force violates the idea of force-pairs and hence Newton's Third Law."
Professor Nathanial Lasry, Physics John Abbot College
"A number of your experiments are not lying in the field of Maxwellian electrodynamics"
That is fascinating! From the mathematical point of view what's going on in your experiments is
the break of S03 symmetry in fundamental tensor of Yang Mills equations that makes it obvious
to see the flaws in Maxwell's Electrodynamics.”
Dr. Evstigneev N.M. Leading Scientist, Department of Chaotic Dynamics,
Institute for Systems Analysis, Russian Academy of Science

6. This is absolutely fascinating stuff you are doing."
Dr. Joseph Shin, Electricity and Magnetism Professor, Concordia University
"Your claims seem to violate the law of conservation of energy and Maxwell's Equations
of Electrodynamics. I will send you a short proposal including my plan of work, estimate of cost
etc. Then we can sign a short agreement and proceed."
Mehrdad (Mark) Ehsani Ph.D. PE F,IEEEF,SAE, Robert M. Kennedy Professor & Director,
Power Electronics and Motor Drives Laboratory & Advanced Vehicle Systems Research Program,
Department of Electrical and Computer Engineering, Texas A&M University
As the Voltage is built up and stored in the Parasitic Capacitance between the windings of the ReGenX
Generator coil it eventually reaches a point as with any Capacitor when the Voltage applied to it
exceeds the Capacitor's ability to store and contain it.
The Dialectic breaks down and it eventually short circuits, Load Current begins to flow in the coil but it
is delayed a second time by the coil's 5 Time Constant Rise Time and then a third time buy the
Hysteresis of the generator coil's core material. The three individual Time Delays which are normally
operationally insignificant and not even considered now became observable and unavoidable.
The ReGenX Generator 1) accelerates itself when a load is applied to it, 2) it increases its own Kinetic
Energy (Inertia) with 3) zero Externally Supplied Input Energy, and 4) it violates;
1. Newton's First and Third Laws of Motion,
2. Faraday's Law of Induction and Lenz's Law of Induction,
3. Maxwell's Equations,
4. the theory of conservation of energy and the the definition of the structure of the Universe,
The second major problem that needed to be addressed was the question of where was the Energy
coming from in order to cause the Kinetic Energy of the ReGenX Generator and Prime Mover System to
increase without any apparent External Input Energy being supplied to it.
Originally we deduced and Dr. Zahn agreed that the Electromagnetic Field Energy that was being
created around the ReGenX Generator coils was somehow collectively finding its way into the Prime
Mover (electric motor) and it was strengthening the Motor Rotor's Electromagnetic Field causing the
system's acceleration because all the construction materials used were Magnetically Conductive.
This theory which we filed and received a Canadian patent on was proven to be false in the Power Lab
at the University of Ottawa in 2008 and a new Energy Source needed to be identified unless our
innovation was somehow also violating the Work-Energy Principe and performing Positive Work
without Energy.
"Thane,Your Press Release was most interesting to me as a physicist & an engineer.
The level of technical detail was adequate to tell me that you probably have made a very
significant advance in applied physics & in safely and successfully handling a
NEW SOURCE OF ELECTRIC ENERGY.
Dr. Stanley Townsend, UofT Former Managing Editor of the Canadian Journal of Physics

7. “When you have eliminated all which is impossible, then whatever remains,
however improbable, must be the truth.”
~ Arthur Conan Doyle, The Case-Book of Sherlock Holmes.
Over the next 10 years we developed and refined our intellectual properties which eventually included
the ReGen-X Quantum Motor in 2018.
The ReGen-X Quantum Motor is the world's first and only Self-Excited and Self-Powering Electric
Motor which can perform any magnitude of Positive Mechanical Work, system acceleration, system
Kinetic Energy increase while requiring zero Externally Supplied Input Energy.
ReGen-X Quantum Motor's Kinetic Energy increase measurements and application of the Work-Energy
Principle forced us to conclude that some how, some kind of unknown Energy was being created
within our system.
I was eventually reminded of an experience in 1980 while sitting in my Motors and Generators class
while studying Electronics Technology in College. The professor introduced the class to the topic of
Generator Armature Reaction which he described as a Counter-Electromagnetic-Torque which
decelerated the generator's prime Mover when the generator was delivering Electric Power to a load.
I immediately put up my hand and asked, “where did the energy come for in order to produce the
Counter-Electromagnetic-Torque? Torque is Work and ALL Work requires Energy right?”
The professor could not answer the question.
In fact the global scientific community has never been able to answer the question of where electric
generators get their Energy in order to perform Negative Work and System Kinetic Energy reduction.
The professor proceeded to explain that Generator Armature Reaction was the result of the creation of
an Electromagnetic Field around the generator coil which enters the Air Gap between the generator
coil and the generator's rotating magnetic field and physically resists its rotation.
(What he was really describing without knowing it was that Electromagnetic Field Energy was being
created around the generator coil and this created Energy was performing Negative Work on the
generator's rotating magnetic field via a Counter-Electromagnetic-Torque. And this created energy was
reducing the Kinetic Energy of both the generator and the Prime Mover which was driving the
generator according to the Work-Energy Principle.)
And as a result of Generator Armature Reaction, additional Input Energy needed to be supplied to the
Prime Mover in order to keep the system turning or the generator would stall the Prime Mover.
I put up my hand again and asked, “so if we could somehow physically divert the generator coil's
Electromagnetic Field from out of the Air Gap... we could reduce its Negative Effects and produce a
generator that was somewhat slightly less negatively impacted and slightly more efficient?”

8. The professor's response was immediate and firm, “yes Thane you could of course do that, but first you
would have to violate Newton's Third Law, Lenz's Law of Induction and the law of conservation of energy
and we all know that you are not the one who will ever be able to achieve that. So please do us a favor
and be quiet and stop asking such absurd questions.”
So the Energy Source was created Electromagnetic Field Energy but how is it created?
It turns out that created and externalized Electromagnetic Field Energy is Sub-Atomic Quantum
Electron Energy or Quantized Fluctuating Probability Wave-function Energy which is created inside
every current bearing wire when an Electromotive Force (Voltage) is applied to the wire and current is
caused to flow in a closed circuit through the wire.
And that created and externalized Electromagnetic Field Energy / Sub-Atomic Quantum Electron
Energy / Quantized Fluctuating Probability Wave-function Energy was originally discovered and used
by Dutch physicist Hans Christian Oersted in 1820 to change (increase) the inertia of a compass
needle, to increase its Kinetic Energy while violating Newton's First Law of Motion and the theory of
conservation of energy TWICE.
Newton's First Law of Motion states that, “the change in Inertia of a body or system must be
accomplished by a Passive External Force and it cannot be changed by an Active Internally Created one”
otherwise the theory of conservation of energy would be false and the Structure of the Universe would
need to be redefined even before they were even proposed.
HOW ELECTROMAGNETIC FIELD ENERGY is CREATED at the SUB-ATOMIC QUANTUM ELECTRON
LEVEL via ELECTRON FISSION and ELECTRON FUSION in all CURRENT BEARING CONDUCTORS
When and Electromotive Force (Electron-Motive Force) or Voltage is applied or induced in a Current
Bearing Wire it causes Loose Electrons to exit their Valence Orbits via ELECTRON FISSION and cascade
withing the wire as Electric Current.
When the unstable and disassociated Electrons return back down to their Lower Energy Level Valence
Orbits via ELECTRON FUSION they emit Photons which create and constitute the Electromagnetic Field
Energy around the Current Bearing Wire.
The Sub-Atomically created Electron Fusion Photon Energy is the Internal and Active Energy Source
which performed Positive Electro-Mechanical Work and increased the Kinetic Energy (Inertia) of
Oersted's compass needle in 1820 while violating Newton's First Law of Motion.
But why didn't Oersted's compass needle remain in its changed location when Oersted removed the
Voltage from the wire?
What caused the compass needle to increase its own Kinetic Energy (Inertia) yet a second time without
the wire's created Electromagnetic Field Energy doing the required Work?
Did Oersted reverse the connections on his battery and perform Positive Work in the opposite
direction?

9. The Work-Energy Principle and the Lawrence Livermore Laboratory provided the answer in 2022...
Positive Work, Kinetic Energy increase of the Oersted's compass needle was performed a second time
by the Earth's created Permanent Magnetic Field Energy.
The Sun employs Overunity Sub-Atomic Fusion to create Photons (Electromagnetic Field Energy) which
travels to the Earth and is magnetically attracted to the high Magnetic Permeability of the Earth's Soft
Iron Core.
The Magnetic Flux Linkage between the Sun and the Earth is improved due to the Earth's Iron Core
which is Ferromagnetic Material and is composed predominantly of Iron and Nickel.
The Hyperthermia of the Earth's Core is due to Magnetic Loss (Hysterisis Loss) in the Ferromagnetic
makeup of the Earth's Core Material since part of the Photon Magnetization Energy Transfer to the
Earth's Core is transformed to Heat Energy via Joule Heating of Earth's Core.
Since the Earth is a Permanent Magnet its created Magnetic Field Energy interacted with Oersted's
compass needle, it performed Positive Work, changed and increased its Kinetic Energy when Oersted
removed the created Electromagnetic Field Energy and its Work effects.
Because the Sun's Photon (Energy) Creation is not static and is continually fluctuating the Magnetic
Field induced within the Earth's core would also not be Static and would Actively rising and falling –
continually magnetizing and demagnetizing.
The Electron's in the Sub-Atomic Structure of the Earth's Core Material would constantly be
experiencing Electron Fission and Electron Fusion as they do in the creation of the Electromagnetic
Field Energy in and around every current bearing wire.
The Magnetic Field Energy which is created inside all Permanent Magnets is also created in the same
manner, that is to say Photon Energy collection from the Sun.
Overunity Electron Fusion and the creation of Photon Energy in the Sun and its Photon collection in
the Earth's Iron Core is the Energy Source which performed Positive Work on Oersted's compass
needle for a second time according to the Work-Energy Principle and the Law of Creation of Energy
which Oersted discovered in 1820.
Michael Faraday also employed created Sub-Atomic Quantum Electron photon Energy in 1822 in order
to perform Positive Work to change and increase the Kinetic Energy of a rigid wire which rotated
around a permanent magnet which was submerged in a Mercury bath.
And in 1834 he used created Electromagnetic Field Energy again to perform Negative Work on an
Electromagnetic Plunger.
Emil Lenz formulated Lenz's Law of Induction in 1834 to explain how created Electromagnetic Field
Energy in a Current bearing wire performs Negative Work at Infinite Efficiency (Generator Armature
Reaction) according to the Work-Energy Principle and the Law of Creation of Energy.

10. This was the answer Professor Mike Else needed in 1980 but didn't have access to at the time.
In 2007 Potential Difference Inc. employed created and time Delayed Electromagnetic Field Energy in
their ReGenX Generator prototype in order to perform Positive Work at Infinite Efficiency while
reversing and eliminating Generator Armature Reaction, violating:
1. Newton's First,
2. and Third Laws of Motion,
5. Faraday's Law of Induction,
6. Lenz's Law of Induction,
7. Maxwell's Equations,
8. the theory of conservation of energy
9. and the the definition of the structure of the Universe which is NOT a Closed, Isolated, and
Energetically Inert system but rather an Active and Energetically Open System.
Thane C. Heins
President and CEO, Potential +/- Difference Inc. R&D
Ottawa, Canada
thaneh@potentialdifference.ca
613.293.1131
“Nothing is too wonderful to be true...”
~ Michael Faraday
Supporting Documentation:
US patented Infinite Efficiency ReGenX Generator/ReGen-X Quantum Motor Operation:
How to Reverse Generator Armature Reaction Lenz's Law of Induction with a Load Current Time
Delay and Introduce Heins' Law of Induction and Infinite Efficiency Electricity Generation and
Infinite Efficiency Electric Motor Operation: https://youtu.be/NbZhKWjpMx4
ReGenX Generator US Patent US2014022205A1:
https://patents.google.com/patent/US20140111054A1/en

11. The Conventional Electric Generator performs Negative Work;
• System Kinetic Energy Reduction,
• with created Electromagnetic Field Energy
• at Infinite Efficiency,
• according to Lenz's Law of Induction,
• the Work-Energy Principle
• and the Law of Creation of Energy.

12. The ReGenX Generator performs Positive Work;
• System Kinetic Energy Increase,
• with created and Time Delayed Electromagnetic Field Energy,
• at Infinite Efficiency
• according to Heins' Law of Induction,
• the Work-Energy Principle
• and the Law of Creation of Energy.

13. THE NEW NORMAL FOR HUMANITY AND PHYSICS IN 2022 AND BEYOND...
https://youtu.be/ibg2FrDogYY
How Lenz's Law of Induction / Generator Armature Reaction can be reversed by
introducing a Load Current Time Delay into an Electric Generator's Performance.
How To Eliminate 100% Of The Pollution and C02 Produced In Electricity
Generation: https://youtu.be/EokzCBVlZ88

14. COMPLETE INFINITE EFFICIENCY ReGenX Generator / ReGen-X Quantum Motor
REPLICATION INSTRUCTIONS:
Step 1:
Regenerative Acceleration Generator/Quantum Motor Innovation Reversing
Lenz's Law of Induction, Invalidating Newton's 1st
and 3rd
Laws of Motion, the
theory of conservation of energy and Establishing Infinite Efficiency Electric
Generator Operation, Heins' Law of Induction and the Law of Creation of
Energy
https://youtu.be/VSCIws7zppU
Step 2:
Mathematical Calculation of the Regenerative Acceleration 5 Time Constant Rise
Time Reversing Lenz's Law and Invalidating Newtons 3rd
Law:
How Increasing an Inductor's 5 Time Constant Rise Time Contributes to
Infinite Efficiency Electric Generator and Motor Operation
https://www.youtube.com/watch?v=cVFXSZzUNmE&t=2s

15. A Chronological History of the Discovery of the Law of Creation of Energy,
the 3 Laws of Electrodynamic Motion, Infinite Efficiency Electric Generator
and Motor Operation and a Redefining of the Structure of the Universe.
https://www.slideshare.net/ThaneNEWENERGYBLUEPR/draft-2-a-chronological-history-
of-the-discovery-of-the-law-of-creation-of-energy-the-3-laws-of-electrodynamic-
motion-infinite-efficiency-electric-generator-and-motor-operation-and-a-redefining-
of-the-structure-of-the-universepdf
https://www.slideshare.net/ThaneNEWENERGYBLUEPR/the-nature-of-subatomic-
quantum-photon-energy-creation-and-externalization-around-a-current-carrying-
conductor