The document describes test protocols for conventional electric generators, ReGenX generators, and ReGen-X quantum motors. The objectives are to show that conventional generators perform negative work using photon energy, have efficiencies over 100% when accounting for both electric and mechanical output, and that ReGenX generators and motors perform positive work using photon energy, require zero mechanical input, and have infinite efficiency. Data will be collected on no-load and on-load performance including speeds, energies, powers and efficiencies to demonstrate these effects.

1. ReGenX Generator
and
ReGen-X Quantum Motor
Test and Performance Protocol
02/21/2021
Prepared by: Thane C. Heins
President and CEO, Potential Difference Inc.
Preface:
Potential Difference has developed the ReGenX Generator and ReGen-X Quantum Motor which
both operate with a US patented Load Current Delay.
As a result of the Load Current Delay the ReGenX Generator is capable of generating any
magnitude of electricity with zero mechanical input power, at infinite efficiency.
Similarly the ReGen-X Quantum Motor is capable of performing Mechanical Work with Time
Delayed Electron Magnetic Field (Photon) Energy and with zero electric input power, also at infinite
efficiency.
Quantum Electron Spin or Electromagnetic Field (Photon) Energy is externalized around any
current carrying conductor when an Electromotive Force (EMF) is applied to the conductor.
Externalized Photon-Energy performs Negative Work in all conventional electric generators (at
infinite efficiency) and in ReGenX Generators and ReGen-X Quantum Motors Photon-Energy
Photon-Energy performs Positive Work (also at infinite efficiency).
The ReGenX Generator simultaneously performs Electricity Generation and Positive Work (system
Kinetic Energy increase) with the Electron Magnetic Field (Photon) Energy, which is externalized
around the ReGenX Generator coils when generating electric output power to a load.
Like the ReGenX Generator, the ReGen-X Quantum Motor also utilizes Electron Magnetic Field
(Photon) Energy, which is externalized around the ReGenX Motor coils and which produces
Mechanical Work (system Kinetic Energy increase).

2. Data Collection
Conventional Generator Performance
No-load prime mover power consumption
at Rotational Equilibrium: _143_ Watts
Drive Shaft Mechanical Power: _0.00_ Watts
RPM: _3490_
No-load calculated Rotational Kinetic Energy: _2,468.6_ Joules
Rotor Masses Prime Mover Rotor + PM Rotor = _3.2 kg_
Rotor Radius = 0.1524 M
No-load Rotational Inertia = ½ M R^2 = ½ 3.2 x (0.1524)^2
I = 0.037 kg m^2
W = (3490/60 x 6.28)
W = 365.3 rad/sec
Rotational KE = ½ I W ^2
= ½ 0.037 (365.3)^2
No-load Rotational KE = 2,468.6 Joules
On-load power delivered to the load:
Volts _11.06_ V
Amps _1.082_ A
Calculated Load Power: _11.97_ Watts
On-load Prime Mover Power Consumption: _162_ Watts
RPM: _3463_
On-load calculated Rotational Kinetic Energy reduction: _2,430.5_ Joules
Total prime mover power consumption increase on-load: _19_ Watts
Total system speed reduction: _27_RPM
Prototype #1

3. Total calculated Rotational Kinetic Energy reduction: _38.1_ Joules
Negative Mechanical Work performed by Electromagnetic-Field-Energy:
< 19_ Watts
Calculated Negative Work efficiency: _____%
Calculated Generator Efficiency: _> 63_ %
100% Prime Mover Efficiency 11.97/21 = 63%
Actual Generator Efficiency: > 126 %
Generator Electrical Output Power PE= 11.97 Watts
Generator Negative Mechanical Output Power PM= 11.97 Watts
PE + PM = 11.97 + 11.97 = 23.94 Watts
Efficiency = 23.94 / < 19 = > 126 %
Notes:
Conventional Generator operation was observed where:
The no-load system Rotational Equilibrium was established at 3490 RPM.
The Rotational Kinetic Energy at 3490 RPM was 2,468.6 Joules.
When placed on-load the generator delivered 11.97 Watts to the load.
The generator performed 11.97 Watts of Negative Mechanical Work which reduced the
system speed by 27 RPM.
The prime mover power consumption increased by 19 Watts.
Less than 19 Watts of Mechanical Power was supplied to the generator's drive shaft by
the prime mover and the system reached another on-load Rotational Equilibrium of 3463
RPM.
The on-load Rotational Kinetic Energy was reduced by 38.1 Joules from 2,468.6 Joules to
2430.5 Joules.

4. PHOTO DATA Conventional Generator
Conventional Generator on No-load at Rotational Equilibrium
No-load Drive Shaft Power = 0.00 Watts
Conventional Generator On-load at Rotational Equilibrium
Generator Output = 11.97 Watts
Negative Work Performed by Generator = 11.97 Watts
Prime Mover Input Increase On-load = 19 Watts
Mechanical Drive Shaft Power Increase = < 19 Watts
Efficiency = > 63%
Actual Generator Efficiency = 126%
No-load Prime Mover Power Consumption No-load RPM
On-load Prime Mover Power Consumption On-load RPM
Conventional Generator Output
Power
Conventional Generator Load Current Sine Wave

5. Data Collection ReGenX Generator Performance
No-load prime mover power consumption
at Rotational Equilibrium: _143_ Watts
Drive Shaft Mechanical Power: _0.00_ Watts
RPM: _3490_
No-load calculated Rotational Kinetic Energy: _2,468.6_ Joules
On-load power delivered to the load:
Volts _12.07_ V
Amps _1.131_ A
Calculated Load Power: _13.65_ Watts
Photon Energy Collection (Flux Harvesting): 1.68 Watts
On-load Prime Mover Power Consumption: _139_ Watts
RPM: _3496_
On-load calculated Rotational Kinetic Energy: _2,477.0_ Joules
Total prime mover power consumption decrease on-load: _4_ Watts
Prime Mover Mechanical Drive Shaft Power Increase: _0.00_ Watts
Total system speed increase: _6_RPM
Total calculated Rotational Kinetic Energy increase: _8.4_ Joules
Positive Mechanical Work performed by Photon Energy: _4_ Watts
Calculated Positive Work efficiency: ____%
Calculated Generator Efficiency: _ _ %
Generator Electrical Output Power PE= 13.65 Watts
Generator Mechanical Output Power PM= 4 Watts
PE + PM = 13.65 + 4 = 17.65 Watts
Efficiency = ____%
Output / Input = 17.65 W / 0.00 Watts
Prototype #1

6. Notes:
ReGenX Generator operation was observed where:
The no-load system Rotational Equilibrium was established at 3490 RPM.
The Rotational Kinetic Energy at 3490 RPM was 2,468.6 Joules.
When placed on-load the generator delivered 13.65 Watts to the load.
The prime mover power consumption decreased by 4 Watts.
The ReGenX Generator performed 4 Watts of Positive Mechanical Work which increased
the system speed by 6 RPM.
0.00 Watts of Mechanical Power was supplied to the generator's drive shaft by the prime
mover and the system reached another On-load Rotational Equilibrium of 3496 RPM.
The on-load Rotational Kinetic Energy was increased by 8.4 Joules to 2477.0 Joules.
The Photon-Energy created around the ReGenX Generator coil performed two forms of
work;
1) The externalized Photon-Energy performed Positive Mechanical Work in increasing the
Rotational Kinetic Energy of the system (RPM increase of 6 RPM).
2) The externalized Photon-Energy performed Electrical Work in increasing the NET rate
change of Magnetic Flux in the conventional generator coil thus increasing the Electric
Power delivered to the load from 11.97 Watts to 13.65 Watts.

7. PHOTO DATA ReGenX Generator
ReGenX Generator on No-load at Rotational Equilibrium
No-load Drive Shaft Power = 0.00 Watts
Conventional Generator On-load at Rotational Equilibrium
Generator Output = 13.65 Watts
Photon Energy Collection (Flux Harvesting) = 1.68 Watts
Prime Mover Input Decrease On-load = 4 Watts
Positive Work Performed by Generator = 4 Watts
Mechanical Drive Shaft Power Decrease = 4 Watts
Mechanical Drive Shaft Power Supplied by Prime Mover = 0.00 Watts
ReGenX Generator Load Current Delay
= 50 Degrees
No-load Prime Mover Power Consumption No-load RPM
On-load RPM
On-load
Prime
Mover
Power
Consumptio
n
On-load Prime Mover Power Consumption
ReGenX Generator Output Power
ReGenX Generator Load Current Sine Wave
(BLUE)

8. ReGen-X Quantum Motor E Core Performance
Prime mover power consumption at Rotational Equilibrium: _143_ Watts
Mechanical Drive Shaft Power at Rotational Equilibrium: _0.00_ Watts
RPM: _3490_
Calculated Rotational Kinetic Energy at Rotational Equilibrium: _2,468.6_ Joules
ReGen-X Quantum Motor RPM: _3514_ RPM
ReGen-X Quantum Motor RPM increase: _24_ RPM
Calculated Rotational Kinetic Energy increase: _2502.6_ Joules
Prime Mover Power Consumption reduction: _> 19_ Watts
ReGen-X Quantum Motor Power Output: _> 19_ Watts
Total calculated Rotational Kinetic Energy increase: _34_ Joules
Calculated Positive Work efficiency: _____%
Calculated ReGen-X Quantum Motor efficiency: _____%
Notes:
The ReGen-X Quantum Motor increased the system speed by 24 RPM or 34 Joules of
Rotational Kinetic Energy with 0.00 Watts of externally supplied energy.
The ReGen-X Quantum Motor performed 19 Watts of Mechanical Work at infinite
efficiency.

9. PHOTO DATA ReGen-X Quantum E Core Motor Performance
ReGen-X Quantum Motor on No-load at Rotational Equilibrium
No-load Drive Shaft Power = 0.00 Watts
No-load Prime Mover Power Consumption = 143 Watts
System Speed = 3490 RPM
ReGen-X Quantum Motor Mechanical Output = 19 Watts
On-load System Speed = 3514 RPM
Rotational Kinetic Energy Increase = 34 Joules
No-load Prime Mover Power Consumption
No-load RPM
No-load Prime Mover Power Consumption
On-load RPM

10. ReGenX Generator C Core Performance
No-load prime mover power consumption at Rotational
Equilibrium: _557_ Watts
RPM: _3222_
Mechanical Drive Shaft Power: 0.00 Watts
Calculated Rotational Kinetic Energy: _3763.6_ Joules
On-load power delivered to the load:
Volts _17.43_ V
Amps _6.81_ A
Calculated Load Power: _118.7_ Watts
On-load prime mover power consumption: _519_Watts
Positive Mechanical Work Performed by ReGenX Generator: _38_ Watts
On-load RPM: _3242_
Total system speed increase: _20_ RPM
Calculated on-load Rotational Kinetic Energy: _3810.6_ Joules
Total prime mover power consumption decrease on-load: _38_ Watts
Total calculated Rotational Kinetic Energy increase: _47.0_ Joules
Mechanical Drive Shaft Power Supplied by Prime Mover: _0.00_ Watts
Calculated Positive Work efficiency: _____%
Calculated ReGenX Generator efficiency: _____%
Notes:
The ReGenX Generator delivered 118.7 electrical Watts to the load while it performed 38
Watts of Mechanical Work which increased the system speed by 20 RPM and 47 Joules of
Rotational Kinetic Energy.
Mechanical Work efficiency is infinite.
Electrical Work efficiency is infinite.

11. PHOTO DATA ReGenX Generator C Core Performance
No-load prime mover power consumption required to establish Rotational Equilibrium
= 557 Watts.
Drive Shaft Mechanical Power = 0.00 Watts
System Speed = 3222 RPM
On-load Load Power = 118.7 Watts
On-load prime mover power consumption required to generate 118.7 Watts = 519 Watts.
System Speed = 3242 RPM
No-load Prime Mover Power Consumption No-load System Speed
On-load Generator Output Power
On-load Prime Mover Power Consumption On-load System Speed

12. C Core ReGen-X Quantum Motor Performance with Commutator
ReGen-X Quantum Motor coil power consumption at Rotational Equilibrium:
Power Consumption: _106_ Watts
RPM: _960.4_
No-load calculated Rotational Kinetic Energy at Rotational Equilibrium: _334.5_ Joules
ReGen-X Quantum Motor (3 coil) RPM increase: _1180_ RPM
On-load power consumption: _69_ Watts
Total system speed increase: _219.6_ RPM
On-load calculated Rotational Kinetic Energy:_504.9_Joules
Total Rotational Kinetic Energy Increase: _170.4_Joules
ReGen-X Quantum Motor Mechanical Work Performed: _37_ Watts
Total ReGen-X Quantum Motor coil power consumption decrease on-load: _37_ Watts
Calculated Positive Work efficiency: _____%
Calculated ReGen-X Quantum Motor efficiency: _____ %
Notes:
ReGen-X Quantum Motor coil #3 was motorized via a commutator, and 106 Watts of
externally supplied electric power was used to accelerate the system up to 960.4 RPM.
ReGen-X Quantum Motor coils #1, 2 & 4 we then used Photon Energy to accelerate the
system from 960.4 RPM to 1180 RPM with zero externally supplied energy.
Photon Energy was used to increase the Rotational Kinetic Energy by 170.4 Joules from
334.5 Joules to 504.9 Joules.
The ReGen-X Quantum Motor utilized Photon Energy to produce 37 Watts of Mechanical
Drive Shaft Power with zero external energy at infinite efficiency.

13. PHOTO DATA C Core ReGen-X Quantum Motor Performance with Commutator
Coil #3 external power consumption required to establish Rotational Equilibrium = 106
Watts.
Drive Shaft Mechanical Power = 0.00 Watts
System Speed = 1080 RPM
Coil #1, 2 & 4 accelerating accelerating ReGen-X Quantum Motor with Photon Energy.
Photon Energy Work Performed: 37 Watts Final System Speed: 1080 RPM
ReGen-X Quantum Motor
Coil #3: Motorized Coil with External Energy
Coil #1, 2 & 4 Motorized with Photon Energy
Coil #3 External Power Required to Establish Rotational
Equilibrium
RPM at Rotational Equilibrium
ReGen-X Quantum Motor Coil Power Reduction
ReGen-X Quantum Motor Powered by Photon Energy

14. C Core ReGen-X Quantum Motor Performance with Secondary Motor
Prime mover power consumption at Rotational Equilibrium:
Prime Mover Power Consumption: _549_Watts
RPM: _3218_
Calculated Rotational Kinetic Energy at Rotational Equilibrium: _3755.0_ Joules
ReGen-X Quantum Motor RPM: _3450_RPM
ReGen-X Quantum Motor Rotational Kinetic Energy: _4316.0_ Joules
Secondary Motor Power Consumption: _307_ Watts
Total prime mover power consumption decrease on-load: _242_Watts
Total system speed increase: _232_ RPM
Total calculated Rotational Kinetic Energy increase: _561_Joules
Mechanical Work Performed by ReGen-X Quantum Motor: _> 242 Watts_ Watts
Calculated Positive Work efficiency: _____%
Calculated ReGen-X Quantum Motor efficiency: _____%
Notes:
The ReGen-X Quantum Motor and induction motor were employed where the induction
motor was used to establish Rotational Equilibrium at 3218 RPM.
The ReGen-X Quantum Motor was then employed and Photon Energy was used to
increase system speed and Rotational Kinetic Energy to 3450 RPM and 4316 Joules
respectively.
The ReGen-X Quantum Motor performed less than 242 Watts of Mechanical Power with
internally created Photon Energy.

15. Photo Data C Core ReGen-X Quantum Motor Performance with Secondary Motor
Rotational Equilibrium power consumption= 549 Watts
System Speed = 3218 RPM
Secondary Motor Power Consumption with ReGen-X Quantum Motor = 307 Watts
System Speed = 3450 RPM
Secondary Motor Power Consumption at Rotational Equilibrium System Speed
Secondary Motor Power Consumption with ReGen-X Quantum
Motor
System Speed

16. Test Protocol Objectives:
The following test protocol will establish that;
1) All conventional electric generators perform Negative Work (system Kinetic Energy
decrease / Counter-Electromagnetic-Torque) with Electron Magnetic Field (Photon)
Energy, which is externalized around the generator coils during their conversion of
mechanical input power to electric output power.
2) All conventional electric generators operate at greater than 100% efficiency when the
absolute value of both the electric output and mechanical output are used in the
efficiency calculation.
2a) When the generator's mechanical output and Negative Work are ignored, the
generator's efficiency is reduced to below 100% efficiency. The Negative Work performed
in all conventional generators is performed with Electron Magnetic Field (Photon) Energy
at infinite efficiency.
3) The ReGenX Generator performs Positive Work (system Kinetic Energy increase /
Complementary-Electromagnetic-Torque) with Time Domain delayed Electron Magnetic
Field (Photon) Energy, which is externalized around the generator coils during their
electric output power generation.
4) Because the ReGenX Generator produces a Complementary-Electromagnetic-Torque it
requires zero mechanical input power when placed On-Load and when generating any
amount of electric output power – always at infinite efficiency.
5) The ReGenX Generator's Complementary-Electromagnetic-Torque produced by the
Time Delayed and externalized Electron Magnetic Field (Photon) Energy, performs
Positive Work and increases the Kinetic Energy of the system (generator and prime
mover) – also at infinite efficiency.
6) The Regen-X Quantum Motor utilizes the Time Delayed Electron Magnetic Field
(Photon) Energy which performs Positive Work as it increases the Kinetic Energy of the
system with zero energy input (infinite efficiency).
7) Electron Magnetic Field (Photon) Energy performs Negative Work in conventional
electric generators and Positive Work in ReGenX Generators when delayed sufficiently in
the Time Domain. Both Negative and Positive Work are performed at infinite efficiency.
8) Electron Magnetic Field (Photon) Energy performs Positive Work in all conventional
electric motors when external electric energy is supplied to the motor. The Positive Work
is performed at infinite efficiency.
9) When the Electron Magnetic Field (Photon) Energy is delayed in the Time Domain in
the ReGen-X Quantum Motor, zero external electric energy is required to perform Positive
Work (system Kinetic Energy increase).

17. Test Methodology:
Two different prototypes (E core design and C core design) will be employed in order to
quantify and demonstrate;
A) The Negative Work performed by Photon Energy in the conventional electric generator
when generating a certain magnitude of electric output power.
B) The Load Current Sine Wave for the conventional generator coil.
C) The magnitude of Rotational Kinetic Energy decrease created in the conventional
generator by Electron Magnetic Field Energy (Photon Energy).
D) The “black box” efficiency of the conventional electric generator (ignoring the
mechanical output power produced).
E) The Positive Work performed by the ReGenX Generator when generating a certain
magnitude of electric output power.
F) The Load Current Sine Wave for the ReGenX Generator coil.
F) The magnitude of Rotational Kinetic Energy produced in the ReGenX Generator by
Electron Magnetic Field (Photon) Energy.
G) The magnitude of Electron Magnetic Field (Photon) Energy – Flux Harvested from the
ReGenX Generator coil to the conventional generator coil.
H) The efficiency of the ReGenX Generator.
I) The magnitude of Rotational Kinetic Energy increase created in the ReGen-X Quantum
Motor by the externalized Electron Magnetic Field (Photon) Energy when no external
prime mover is employed.
J) The magnitude of Rotational Kinetic Energy increase created in the ReGen-X Quantum
Motor by the externalized Electron Magnetic Field (Photon) Energy when an external
prime mover is employed.
J) The efficiency of the ReGen-X Quantum Motor in both operational conditions.

18. Test Procedure:
1) E Core prototype #1 will be brought up to Rotational Equilibrium where the drive shaft
Net Torque and Power are both zero.
E Core Conventional Electric Generator Performance
The E Core prototype employs a conventional generator coil wound around an E core and
two ReGenX Generator coils wound on the E core's middle finger.
2) The conventional generator coil will be connected to a purely resistive load and the
electric power delivered to the load will be measured and recorded.
3) The increase in prime mover power consumption will be recorded.
*Based on previous operation the conventional generator will deliver about 10 Watts to
the load and the prime mover power consumption will increase by about 20 Watts.
4) The Load Current Sine Wave for the conventional generator coil will be observed on
the oscilloscope.
5) The efficiency of the conventional generator will be calculated at less than 100%
without factoring the Negative Work performed and greater than 100% efficiency with it.
6) The Rotational Kinetic Energy decrease performed by the externalized Electron
Magnetic Field (Photon) Energy will be calculated.
7) The conventional generator's Infinite Efficiency at decreasing the Rotational Kinetic
Energy of the system (generator and prime mover) will be calculated.
E Core ReGenX Generator Performance
8) The ReGenX Generator coil will be connected to an identical purely resistive load and
the increased electric power delivered to the load will be measured and recorded.
9) The decrease in prime mover power consumption will be recorded.
10 The delayed Load Current Sine Wave will be observed on the oscilloscope.
11 The magnitude of Flux Harvested Electron Magnetic Field Energy will be recorded.
12) The Infinite Efficiency of the ReGenX Generator will be calculated.
13) The Rotational Kinetic Energy increase performed by the externalized Electron
Magnetic Field (Photon) Energy will be calculated.
14) The ReGenX Generator's Infinite Efficiency at increasing the Rotational Kinetic Energy
of the system (generator and prime mover) will be calculated.

19. E Core ReGen-X Quantum Motor Performance
15) The RPM increase for the ReGen-X Quantum Motor will be recorded.
16) The ReGen-X Quantum Motor Rotational Kinetic Energy increase will be calculated.
17) The decrease in prime mover power consumption will be recorded.
18) The Infinite Efficiency of the ReGen-X Quantum Motor will be calculated.
C Core ReGenX Generator Performance Operating Above the Critical Minimum
Frequency
C Core prototype #2 has 4 commercially wound ReGenX coils mounted on Met-glass C
core material.
19) C Core prototype #2 will be brought up to Rotational Equilibrium where the drive
shaft Net Torque and Power are both zero.
20) Prototype #2 will be placed on-load and approximately 120 Watts of DC power will be
delivered to a battery.
21) The prime mover power consumption reduction will be recorded.
22) The magnitude of Flux Harvested Electron Magnetic Field (Photon) Energy will be
recorded.
21) The prime mover RPM increase will be recorded.
23) The infinite efficiency of the ReGenX Generator will be calculated.
24) The Rotational Kinetic Energy increase performed by the Electron Magnetic Field
(Photon) Energy will be calculated.
25) The ReGenX Generator's Infinite Efficiency at increasing the Rotational Kinetic Energy
of the system (generator and prime mover) will be calculated.
C Core ReGenX Generator Performance Operating Below the Critical Minimum
Frequency
26) C Core prototype #2 will be brought up to Rotational Equilibrium at a Frequency of
Operation which is below the Critical Minimum Frequency as required to establish
Regenerative Acceleration where the drive shaft Net Torque and Power are both zero.
27) Prototype #2 will be placed on-load and DC power will be delivered to a battery.
28) The prime mover power consumption increase will be recorded.
29) The prime mover RPM decrease will be recorded.

20. 30) The efficiency of the ReGenX Generator will be calculated.
31) The Rotational Kinetic Energy decrease performed by the Electron Magnetic Field
(Photon) Energy will be calculated.
32) The ReGenX Generator's Infinite Efficiency at decreasing the Rotational Kinetic
Energy of the system (generator and prime mover) will be calculated.
C Core ReGen-X Quantum Motor Performance with Commutator
33) A single (1 of 4) ReGen-X Quantum Motor coil will employ a commutator in order to
establish Rotational Equilibrium at about 700 RPM (140 Hz).
34) The electrical input power required by the single ReGen-X Quantum Motor coil will be
recorded.
35) The RPM will be established and recorded.
36) The Rotational Kinetic Energy will be calculated.
37) The remaining 3 ReGen-X Quantum Motor coils will be used to increase the RPM of
the system and the Rotational Kinetic Energy with zero externally supplied electric
energy.
38) The higher RPM will be recorded.
39) The increased Rotational Kinetic Energy will be calculated.
40) The Net increase in Rotational Kinetic Energy will be calculated.
41) The efficiency of the ReGen-X Quantum Motor will be calculated.
C Core ReGen-X Quantum Motor Performance with Prime Mover
42) The ReGen-X Quantum Motor will be brought to Rotational Equilibrium at about 3400
RPM (680 Hz) – where the Mechanical Drive Shaft Power = zero Watts.
43) The electrical input power to ReGen-X Quantum Motor coil will be recorded.
44) The RPM will be established and recorded.
45) The Rotational Kinetic Energy will be calculated.
46) The 4 ReGen-X Quantum Motor coils will be used to increase the RPM of the system
and the Rotational Kinetic Energy with zero externally supplied electric energy.
47) The higher RPM will be recorded.
48) The increased Rotational Kinetic Energy will be calculated.

21. 49) The Net increase in Rotational Kinetic Energy will be calculated.
50) The efficiency of the ReGen-X Quantum Motor will be calculated.
Test Data Conclusions Summary:
Conventional generator operation is demonstrated in this report.
When the conventional generator coil delivers electrical power to a load, the Photon
Energy (Electromagnetic-Field-Energy) created around the generator coil performs
Negative Work. This Negative Work is performed by Photon Energy at infinite efficiency.
This Negative Work necessitates an increase in prime mover power consumption and an
increase in drive shaft Mechanical input power to be supplied the generator in order for
electrical output power to be sustained across a load.
For every Watt of electric power delivered to the load an equivalent Watt of mechanical
input power must be supplied to the generator.
ReGenX Generator operation is demonstrated in this report.
When the ReGenX Generator coil delivers electrical power to a load, the Photon Energy
(Electromagnetic-Field-Energy) created around the generator coil performs Positive Work.
This Positive Work is performed by Photon Energy at infinite efficiency.
This Positive Work produces a decrease in prime mover power consumption and a
decrease in drive shaft Mechanical input power to be supplied the generator.
For every Watt of electric power delivered to the load an equivalent zero Watts of
mechanical input power must be supplied to the generator.
ReGen-X Quantum Motor operation is demonstrated in this report.
The ReGen-X Quantum Motor employs Photon Energy in order to perform Positive Work
without the need for externally supplied energy.

22. Prototype
Operation
Generator
Output
Power
(Watts)
Prime Mover
Supplied
Mechanical
Power
(Watts)
Negative
Work
Performed
by Photon
Energy
(Watts)
Positive
Work
Performed
by Photon
Energy
(Watts)
Generator
Efficiency
%
Conventional
Generator
11.97 < 19 11.97 - 126
ReGenX
Generator
13.65 0 - > 4
Regen-X
Quantum Motor
- 0 - > 19
Table 1: Efficiency Comparisons for Conventional and ReGenX Generator
Prototype Operation Generator
Output
Power
(Watts)
Prime Mover
Supplied
Mechanical
Power
(Watts)
Positive Work
Performed by
Photon Energy
(Watts)
Generator
Efficiency
%
ReGenX Generator
C Core
118.7 0 > 38
Table 2: ReGenX Generator C Core Performance Efficiency
Prototype
Operation
Motor
Speed
Increase
(RPM)
Rotational
Kinetic
Energy
Increase
(Joules)
External
Energy
Supplied
(Watts)
Photon Energy
Work
Performed
(Watts)
ReGen-X
Quantum
Motor
Efficiency
%
ReGen-X
Motor C
Core
219.6 170.4 0 > 37
Table 3: C Core ReGen-X Quantum Motor Performance with Commutator
Prototype
Operation
Motor
Speed
Increase
(RPM)
Rotational
Kinetic
Energy
Increase
(Joules)
External
Energy
Supplied
(Watts)
Photon Energy
Work
Performed
(Watts)
ReGen-X
Quantum
Motor
Efficiency
%
ReGen-X
Motor C
Core
232 561.4 0 > 242 Watts
Table 4: C Core ReGen-X Quantum Motor Performance with Secondary Motor