MIT TESTING PROTOCOL PROTOTYPE #1 - INFINITE EFFICIENCY ReGenX GENERATOR & QUANTUM MOTOR.pdf
MIT TESTING PROTOCOL PROTOTYPE #1 - INFINITE EFFICIENCY ReGenX GENERATOR & QUANTUM MOTOR.pdf
Please find attached the MIT Test Performance Protocol which demonstrates Infinite Efficiency ReGenX Generator and ReGen-X Quantum Motor operation and confirmation of the Creation of Energy at the Sub-Atomic Quantum Electron level in all current bearing wires. PROTOTYPE #1 CONCENTRIC E - CORE DATA SUMMARY: Conventional Generator: 1) The Conventional Generator delivered 9.65 Watts to the load. 2) The created Electromagnetic Field Energy around the Conventional Generator Coil performed 28.4 Joules of Negative Work at infinite efficiency and it reduced the Kinetic Energy of the system by 28.4 Joules and the System Speed by 20 RPM. 3) The Prime Mover (Induction Motor) consumed an additional 20 Watts and delivered increased Torque and Power to the generator's drive shaft. 4) The efficiency of the Conventional Generator's electricity generation was less than 100%. 5) 28.4 Joules of Electromagnetic Field Energy was created which performed 28.4 Joules of Negative Work and a Kinetic Energy reduction of 28.4 Joules at infinite efficiency with zero externally supplied input energy.. 6) ReGenX Generator Coil #1: 7) The ReGenX Generator Coil #1 delivered 11.02 Watts to the load. 8. The created Electromagnetic Field Energy around the ReGenX Generator Coil #1 performed 35.2 Joules of Positive Work and it increased the Kinetic Energy of the system by 35.2 Joules and the System Speed by 4 RPM. 9) Zero Mechanical Input Power was required by the ReGenX Generator and its efficiency was infinite. 10) 35.2 Joules of Electromagnetic Field Energy was created which performed 35.2 Joules of Positive Work and a Kinetic Energy increase of 35.2 Joules at infinite efficiency with zero externally supplied input energy. ReGenX Generator Coil #1 &2: 11) ReGenX Generator Coil #1 and #2 delivered 11.14 Watts to the load. 12) The created Electromagnetic Field Energy around the ReGenX Generator Coil #1 and #2 performed 40.6 Joules of Positive Work and it increased the Kinetic Energy of the system by 40.6 Joules and the System Speed by 8 RPM. 13) Zero Mechanical Power was required by the ReGenX Generator and its efficiency was infinite. 14) 40.6 Joules of Electromagnetic Field Energy was created which performed 40.6 Joules of Positive Work and a Kinetic Energy increase of 40.6 Joules at infinite efficiency with zero externally supplied input energy. ReGen-X Quantum Motor: 15) The ReGen-X Quantum Motor performed 31.3 Joules of Kinetic Energy increase (22 RPM) at Infinite Efficiency with zero externally supplied Input Energy. 16) 31.3 Joules of created Electromagnetic Field Energy was created which performed 31.3 Joules of Positive Work, which increased the Kinetic Energy of the system by 31.3 Joules at infinite efficiency. MIT TABLE PROTOTYPE 1 - HEINS DEFINITIVE DATA https://www.slideshare.net/PDiCEOThaneHeins3240/mit-table-prototype-1-heins-definitive-datapdf
Recommended
More Related Content
Similar to MIT TESTING PROTOCOL PROTOTYPE #1 - INFINITE EFFICIENCY ReGenX GENERATOR & QUANTUM MOTOR.pdf
Similar to MIT TESTING PROTOCOL PROTOTYPE #1 - INFINITE EFFICIENCY ReGenX GENERATOR & QUANTUM MOTOR.pdf(20)
More from Thane Heins Regenerative Acceleration Generator Technology
More from Thane Heins Regenerative Acceleration Generator Technology(20)
Recently uploaded
Recently uploaded(20)
MIT TESTING PROTOCOL PROTOTYPE #1 - INFINITE EFFICIENCY ReGenX GENERATOR & QUANTUM MOTOR.pdf
- 1. MIT TESTING PROTOCOL INFINITE EFFICIENCY ReGenX GENERATOR & ReGen-X QUANTUM MOTOR PROTOTYPE NUMBER 1: https://youtu.be/-g498YXHGZA CONCENTRIC E CORE SALIENT POLE GENERATOR COIL Conventional Generator Operation- No-Load Rotational Equilibrium System Speed: 3501 RPM Prime Mover Power Consumption: 168 Watts Drive Shaft Torque: 0.00 Nm �
- 2. Drive Shaft Power: 0.00 Watts System Rotational Kinetic Energy (K) at 3501 RPM Mass of Rotational Components: 3.2 kg Radius of Rotational Components: 0.1524 M Rotational Inertia I: I = MR^2/2 = 3.2 (0.1524)^2/2 Rotational Inertia = 0.037 kg M^2 The Angular Velocity ω: 366.6 rad/s Rotational Kinetic Energy = 0.5 x I (w)^2 = 0.5 x 0.037 (366.6)^2 Rotational Kinetic Energy at 3501 RPM KE = 2486.3 Joules Conventional Generator Operation- On-Load Rotational Equilibrium System Speed: 3481 RPM Prime Mover Power Consumption Increase (+20 W): 188 Watts Load Power: 10.6 Volts 0.91 Amps
- 3. Load Power 9.65 Watts Prime Mover Supplied Drive Shaft Torque Increase: Tnm = PW 9.549 / n where Tnm = Torque (Nm) PW = Power (watts) n = Revolution Per Minute (RPM) Prime Mover Supplied Drive Shaft Torque Nm = kW 9550 / RPM = 0.02 x 9550 / 3481 Prime Mover Supplied On-Load Drive Shaft Torque Increase < 0.055 Nm Prime Mover Supplied On-load Drive Shaft Power Increase: < 20 Watts Conventional Generator Efficiency = 9.65 / < 20 Conventional Generator Efficiency = > 48.2% Estimated Prime Mover Efficiency at 3481 RPM ~ 60% Estimated Conventional Generator Efficiency = 80.4% Conventional Generator System Rotational Kinetic Energy (KE) System Speed 3481 RPM Mass of Rotational Components: 3.2 kg
- 4. Radius of Rotational Components: 0.1524 M Rotational Inertia I: I = MR^2/2 = 3.2 (0.1524)^2/2 Rotational Inertia = 0.037 kg M^2 The angular velocity ω: 364.5 rad/s Rotational Kinetic Energy = 0.5 x I (w)^2 = 0.5 x 0.037 (364.5)^2 Rotational Kinetic Energy at 3481 RPM KE = 2457.9 Joules Negative Work Performed by Conventional Generator Negative Work = Kinetic Energy (Initial) – Kinetic Energy (Final) KE = 2486.3 Joules - 2457.9 Joules Kinetic Energy Reduction – 28.4 Joules Negative Work = 28.4 Joules External Energy Supplied to the System = 0.00 Joules Created Electromagnetic Field Energy Required to Perform 28.4 Joules of Negative Work with 0.00 Externally Supplied Energy Created Energy Magnitude = 28.4 Joules
- 5. ReGenX Generator Operation- On-Load Rotational Equilibrium COIL 1 System Speed: 3505 RPM Prime Mover Power Consumption Decrease (- 3 W): 165 Watts Load Power: 11.6 Volts 0.95 Amps Load Power = 11.02 Watts ReGenX Generator Efficiency = 11.02 / 0.00 (- 3) ReGenX Generator Efficiency = Infinite % Prime Mover Supplied Drive Shaft Torque Decrease: Tnm = PW 9.549 / n where Tnm = torque (Nm) PW = power (watts) n = revolution per minute (rpm) Drive Shaft Torque Nm = kW 9550 / RPM = - 0.003 x 9550 / 3505 = > - 0.008 Nm
- 6. On-Load Prime Mover Supplied Drive Shaft Power Reduction: > - 3 Watts ReGenX Generator System Rotational Kinetic Energy (KE) COIL 1 System Speed 3505 RPM Mass of Rotational Components: 3.2 kg Radius of Rotational Components: 0.1524 M Rotational Inertia I: I = MR^2/2 = 3.2 (0.1524)^2/2 Rotational Inertia = 0.037 kg M^2 The Angular Velocity ω: 367.1 rad/s Rotational Kinetic Energy = 0.5 x I (w)^2 = 0.5 x 0.037 (367.1)^2 Rotational Kinetic Energy at 3505 RPM KE = 2493.1 Joules Positive Work Performed by ReGenX Generator Positive Work = Kinetic Energy (Initial) – Kinetic Energy (Final) KE = 2457.9 Joules - 2493.1 Joules Kinetic Energy Increase = +35.2 Joules
- 7. Positive Work = 35.2 Joules External Energy Supplied to the System = 0.00 Joules Created Electromagnetic Field Energy Required to Perform 35.2 Joules of Positive Work Created Energy Magnitude = 35.2 Joules ReGenX Generator Operation- On-Load Rotational Equilibrium COIL 1 & 2 System Speed: 3509 RPM Prime Mover Power Consumption Decrease (- 7 W): 161 Watts Load Power: 11.73 Volts 0.95 Amps Load Power = 11.14 Watts ReGenX Generator Efficiency = 11.02 / 0.00 (- 7) ReGenX Generator Efficiency = Infinite % Drive Shaft Torque: Tnm = PW 9.549 / n where Tnm = torque (Nm)
- 8. PW = power (watts) n = revolution per minute (rpm) Prime Mover Supplied Drive Shaft Torque Nm = kW 9550 / RPM = - 0.007 x 9550 / 3505 = > - 0.019 Nm Prime Mover Supplied Drive Shaft Power Decrease: > - 7 Watts ReGenX Generator System Rotational Kinetic Energy (KE) COIL 1 &2 System Speed 3509 RPM Mass of Rotational Components: 3.2 kg Radius of Rotational Components: 0.1524 M Rotational Inertia I: I = MR^2/2 = 3.2 (0.1524)^2/2 Rotational Inertia = 0.037 kg M^2 The Angular Velocity ω: 367.5 rad/s Rotational Kinetic Energy = 0.5 x I (w)^2 = 0.5 x 0.037 (367.5)^2 Rotational Kinetic Energy at 3509 RPM
- 9. KE = 2498.6 Joules Positive Work Performed by ReGenX Generator Positive Work = Kinetic Energy (Initial) – Kinetic Energy (Final) KE = 2457.9 Joules – 2498.6 Joules Kinetic Energy Increase = +40.6 Joules External Energy Supplied to the System = 0.00 Joules Positive Work = 40.6 Joules Created Electromagnetic Field Energy Required to Perform 35.2 Joules of Positive Work Created Energy Magnitude = 35.2 Joules ReGen-X Quantum Motor Operation No-Load Motor INITIAL System Speed at Rotational Equilibrium: 3501 RPM No-Load Prime Mover Power Consumption: 168 Watts Drive Shaft Torque: 0.00 Nm Drive Shaft Power: 0.00 Watts INITIAL System Rotational Kinetic Energy (KE) at 3501 RPM
- 10. Mass of Rotational Components: 3.2 kg Radius of Rotational Components: 0.1524 M Rotational Inertia I: I = MR^2/2 = 3.2 (0.1524)^2/2 Rotational Inertia = 0.037 kg M^2 The Angular Velocity ω: 366.6 rad/s Rotational Kinetic Energy = 0.5 x I (w)^2 = 0.5 x 0.037 (366.6)^2 INITIAL Rotational Kinetic Energy (KE) at 3501 RPM KE = 2486.3 Joules On-Load Motor FINAL System Speed at Rotational Equilibrium: 3523 RPM Prime Mover Power Consumption: 148 Watts Prime Mover Supplied Drive Shaft Torque Increase: 0.00 Nm Prime Mover Supplied Drive Shaft Power Increase: 0.00 Watts FINAL System Rotational Kinetic Energy (K) at 3523 RPM Mass of Rotational Components: 3.2 kg
- 11. Radius of Rotational Components: 0.1524 M Rotational Inertia I: I = MR^2/2 = 3.2 (0.1524)^2/2 Rotational Inertia = 0.037 kg M^2 The Angular Velocity ω: 368.9 rad/s Rotational Kinetic Energy = 0.5 x I (w)^2 = 0.5 x 0.037 (368.9)^2 FINAL Rotational Kinetic Energy (KE) at 3523 RPM KE = 2517.6 Joules Positive Work Performed by ReGen-X Quantum Motor Positive Work = Kinetic Energy (Initial) – Kinetic Energy (Final) KE = 2486.3 Joules – 2517.6 Joules Kinetic Energy Increase = +31.3 Joules External Energy Supplied to the System = 0.00 Joules Positive Work = 31.3 Joules Created Electromagnetic Field Energy Required to Perform 31.3 Joules of Positive Work Created Energy Magnitude = 31.3 Joules
- 12. Machine Type Speed (RPM) Prime Mover Power (Watts) Prime Mover Supplied Torque (Nm) INPUT Prime Mover Supplied Drive Shaft Power (Watts) Rotational Kinetic Energy (Joules) OUTPUT Load Power (Watts) System Efficiency Mech. IN Elec. OUT (%) Kinetic Energy Work Magnitude & Type (Joules) Energy Created Electromagnetic Field Energy (Joules) No-Load Conventional Generator 3501 168 0.00 0.00 2486.3 On-Load Conventional Generator 3481 188 < 0.055 < 20 2457.9 (-28.4) 9.65 < 80 - 28.4 Negative Work 28.4 No-Load ReGenX Generator 3501 168 0.00 0.00 2486.3 On-Load ReGenX Generator Coil 1 3505 165 0.00 0.00 2493.1 (+35.2) 11.02 Infinite +35.2 Positive Work 35.2 On-Load ReGenX Generator Coil 1 3509 161 0.00 0.00 2498.6 11.14 Infinite +40.6 Positive Work 40.6 On-Load ReGen-X Quantum Motor 3523 148 0.00 0.00 2517.6 Infinite +31.3 Positive Work 31.3
- 13. Thane C. Heins President and CEO, Potential +/- Difference Inc. R&D Ottawa, Canada thaneh@potentialdifference.ca 613.293.1131 “The future depends on what we do today... in a gentle way, we can shake the world” — Mahatma Gandhi