MIT TEST PROTOCOL TO CONFIRM INFINITE EFFICIENCY ReGenX GENERATOR AND ReGen-X QUANTUM MOTOR PERFORMANCE AND CONFIRMATION OF THE LAW OF CREATION OF ENERGY.
Please find attached the MIT Test Performance Protocol which demonstrates Infinite Efficiency ReGenX Generator and ReGen-X Quantum Motor operation and confirmation of the Creation of Energy at the Sub-Atomic Quantum Electron level in all current bearing wires.
PROTOTYPE #2 C CORE - DATA SUMMARY:
Conventional Generator Operation:
1. The Conventional Generator delivered 0.00 Watts to the load (battery).
2. The created Electromagnetic Field Energy around the Conventional Generator coils performed 1188.2 Joules of Negative Work at infinite efficiency and it completely stalled the system.
3. The efficiency of the system was zero.
ReGenX Generator Operation:
4. The ReGenX Generator delivered 106.6 Watts to the load with 0.00 Watts of Mechanical Input Power from the Prime Mover at infinite efficiency.
5. The ReGenX Generator increased the Speed of the system by 76 RPM (performed 191.5 Joules of Positive Work) at infinite efficiency with zero External input Energy and a Prime Mover Input Power consumption reduction of 229.4 Watts.
6. 191.5 Joules of Positive Work was performed with 191.5 Joules of created Electromagnetic Field Energy which produced a 191.5 Joule increase in system Kinetic Energy at infinite efficiency with zero externally supplied input energy.
ReGen-X Quantum Motor Operation:
7. The ReGen-X Quantum Motor increased the Speed of the system by 197 RPM (477.4 Joules of Positive Work) at infinite efficiency with zero externally supplied input energy.
DEFINITIONS:
1. Infinite Efficiency:
Infinite Efficiency Electricity Generation occurs when zero Mechanical Input Drive Shaft Power is required by the generator when the generator is delivering any magnitude of Electric Power to a load.
Infinite Efficiency Electric Motor Operation occurs when Mechanical Work is performed and zero Electric Input Energy is delivered to the motor.
2. Creation of Energy:
Electromagnetic Field Energy is created at the Sub-Atomic Quantum Electron level in every Current Bearing Wire when Electric Current flows in the wire.
The created Electromagnetic Field Energy performs all the Negative Work in all Conventional Electric Generators at infinite efficiency.
The created Electromagnetic Field Energy performs all the Positive Work in all ReGenX Electric Generators at infinite efficiency when the creation of the Energy is delayed in the Time Domain.
VIDEO #2 Prototype #2: INFINITE EFFICIENCY ReGenX GENERATOR and ReGen-X Quantum Motor
https://www.youtube.com/watch?v=WF-J-1OyF7c
VIDEO #3 How Electromagnetic Field Energy is Created at the Sub-Atomic Quantum Electron Level in Every Current Bearing Wire: https://www.youtube.com/watch?v=hiXf7cmQGhA&t=4s
1. MIT TESTING PROTOCOL
INFINITE EFFICIENCY ReGenX GENERATOR & ReGen-X QUANTUM MOTOR
PROTOTYPE NUMBER 2: https://www.youtube.com/watch?v=WF-J-1OyF7c
C CORE SALIENT POLE GENERATOR
Conventional Generator Operation - No-Load Rotational Equilibrium
System Speed: 1812 RPM
Prime Mover Power Consumption: 1882 Watts
Drive Shaft Torque: 0.00 Nm
Drive Shaft Power: 0.00 Watts
System Rotational Kinetic Energy (K) at 1812 RPM
ďż˝
2. Mass of Rotational Components: 5.7 kg
Radius of Rotational Components: 0.1524 M
Rotational Inertia I:
I = MR^2/2
= 5.7 (0.1524)^2/2
Rotational Inertia = 0.066 kg M^2
The Angular Velocity ω: 189.75 rad/s
Rotational Kinetic Energy = 0.5 x I (w)^2
= 0.5 x 0.066 (189.75)^2
Rotational Kinetic Energy at 1812 RPM KE = 1188.2 Joules
Conventional Generator Operation - On-Load Rotational Equilibrium
System Speed: 0.00 RPM
Prime Mover Power Consumption Increase (+39 W): 1921 Watts
Load Power:
Volts 0.00
Amps 0.00
Power = 0.00 Watts
Load Power 0.00 Watts
3. Prime Mover Supplied On-load Drive Shaft Power Increase: < 39 Watts
Conventional Generator Efficiency = 0 %
Conventional Generator System On – Load Rotational Kinetic Energy (KE)
KE = 0.00 Joules
Negative Work Performed by Conventional Generator
Negative Work = Kinetic Energy (Initial) – Kinetic Energy (Final)
KE = 1188.2 Joules 0.00 Joules
Kinetic Energy Reduction – 1188.2 Joules
Negative Work = 1188.2 Joules
External Energy Supplied to the System = 0.00 Joules
Created Electromagnetic Field Energy Required to Perform 1188.2 Joules of Negative Work with 0.00 Externally
Supplied Energy
Created Energy Magnitude = 1188.2 Joules
4. ReGenX Generator Operation – No - Load Rotational Equilibrium
System Speed: 3224 RPM
Prime Mover Power Consumption = 575 Watts
No-Load Rotational Kinetic Energy
Rotational Inertia I:
I = MR^2/2
= 5.7 (0.1524)^2/2
Rotational Inertia = 0.066 kg M^2
The Angular Velocity ω: 337.1 rad/s
Rotational Kinetic Energy = 0.5 x I (w)^2
= 0.5 x 0.066 (337.1)^2
Rotational Kinetic Energy at 3224 RPM KE = 3750.0 Joules
ReGenX Generator Operation- On-Load Rotational Equilibrium
System Speed: 3300 RPM
Prime Mover Power Consumption Decrease (- 54 W): 521 Watts
Load Power:
15.23 Volts
5. 7.00 Amps
Load Power = 106.6 Watts
ReGenX Generator Efficiency = 106.6 / 0.00 (- 54 W)
ReGenX Generator Efficiency = Infinite %
Drive Shaft Torque:
Tnm = PW 9.549 / n
where
Tnm = torque (Nm)
PW = power (watts)
n = revolution per minute (rpm)
Prime Mover Supplied Drive Shaft Torque Nm = kW 9550 / RPM
= - 0.521 x 9550 / 3300
= > - 1.5 Nm
Prime Mover Supplied Drive Shaft Power Decrease: > - 54 Watts
ReGenX Generator System Rotational Kinetic Energy (KE)
System Speed 3300 RPM
Mass of Rotational Components: 5.7 kg
Radius of Rotational Components: 0.1524 M
6. Rotational Inertia I:
I = MR^2/2
= 5.7 (0.1524)^2/2
Rotational Inertia = 0.066 kg M^2
The Angular Velocity ω: 345.6 rad/s
Rotational Kinetic Energy = 0.5 x I (w)^2
= 0.5 x 0.066 (345.6)^2
Rotational Kinetic Energy at 3300 RPM
KE = 3941.5 Joules
Positive Work Performed by ReGenX Generator
Positive Work = Kinetic Energy (Initial) – Kinetic Energy (Final)
KE = 3750 Joules – 3941.5 Joules
Kinetic Energy Increase = +191.5 Joules
External Energy Supplied to the System
= 0.00 Joules
Positive Work = 191.5 Joules
Created Electromagnetic Field Energy Required to Perform 191.5 Joules of Positive Work
Created Energy Magnitude = 191.5 Joules
7. ReGen-X Quantum Motor Operation
No-Load Motor INITIAL System Speed at Rotational Equilibrium:
3254 RPM
No-Load Prime Mover Power Consumption: 564 Watts
Drive Shaft Torque: 0.00 Nm
Drive Shaft Power: 0.00 Watts
INITIAL System Rotational Kinetic Energy (KE) at 3254 RPM
Mass of Rotational Components: 5.7 kg
Radius of Rotational Components: 0.1524 M
Rotational Inertia I:
I = MR^2/2
= 5.7 (0.1524)^2/2
Rotational Inertia = 0.066 kg M^2
The Angular Velocity ω: 340.8 rad/s
Rotational Kinetic Energy = 0.5 x I (w)^2
= 0.5 x 0.066 (340.8)^2
INITIAL Rotational Kinetic Energy (KE) at 3254 RPM
KE = 3832.8 Joules
8. On-Load Motor FINAL System Speed at Rotational Equilibrium:
3451 RPM
Prime Mover Power Consumption: 342 Watts
Prime Mover Supplied Drive Shaft Torque Increase: 0.00 Nm
Prime Mover Supplied Drive Shaft Power Increase: 0.00 Watts
FINAL System Rotational Kinetic Energy (K) at 3451 RPM
Mass of Rotational Components: 5.7 kg
Radius of Rotational Components: 0.1524 M
Rotational Inertia I:
I = MR^2/2
= 5.7 (0.1524)^2/2
Rotational Inertia = 0.066 kg M^2
The Angular Velocity ω: 361.4 rad/s
Rotational Kinetic Energy = 0.5 x I (w)^2
= 0.5 x 0.066 (361.4)^2
FINAL Rotational Kinetic Energy (KE) at 3451 RPM
KE = 4310.2 Joules
Positive Work Performed by ReGen-X Quantum Motor
9. Positive Work = Kinetic Energy (Initial) – Kinetic Energy (Final)
KE = 3832.8 Joules – 4310.2 Joules
Kinetic Energy Increase = + 477.4 Joules
External Energy Supplied to the System = 0.00 Joules
Positive Work = 477.4 Joules
Created Electromagnetic Field Energy Required to Perform 477.4 Joules of Positive Work
Created Energy Magnitude = 477.4 Joules
11. Thane C. Heins
President and CEO, Potential +/- Difference Inc. R&D
Ottawa, Canada
thaneh@potentialdifference.ca
613.293.1131
“The future depends on what we do today... in a gentle way, we can shake the world”
— Mahatma Gandhi