Conflict-free dynamic route multi-agv using dijkstra Floyd-warshall hybrid a...IJECEIAES
Autonomous Guided Vehicle is a mobile robot that can move autonomously on a route or lane in an indoor or outdoor environment while performing a series of tasks. Determination of the shortest route on an autonomous guided vehicle is one of the optimization problems in handling conflict- free routes that have an influence on the distribution of goods in the manufacturing industry's warehouse. Pickup and delivery processes in the distribution on AGV goods such as scheduling, shipping, and determining the route of vehicle with short mileage characteristics, is very possible to do simulations with three AGV units. There is a windows time limit on workstations that limits shipping. The problem of determining the route in this study is considered necessary as a multi-vehicle route problem with a time window. This study aims to describe the combination of algorithms written based on dynamic programming to overcome the problem of conflict-free AGV routes using time windows. The combined approach of the Dijkstra and Floyd-Warshall algorithm results in the optimization of the closest distance in overcoming conflict-free routes.
Help the Genetic Algorithm to Minimize the Urban Traffic on IntersectionsIJORCS
Control of traffic lights at the intersections of the main issues is the optimal traffic. Intersections to regulate traffic flow of vehicles and eliminate conflicting traffic flows are used. Modeling and simulation of traffic are widely used in industry. In fact, the modeling and simulation of an industrial system is studied before creating economically and when it is affordable. The aim of this article is a smart way to control traffic. The first stage of the project with the objective of collecting statistical data (cycle time of each of the intersection of the lights of vehicles is waiting for a red light) steps where the data collection found optimal amounts next it is. Introduced by genetic algorithm optimization of parameters is performed. GA begin with coding step as a binary variable (the range specified by the initial data set is obtained) will start with an initial population and then a new generation of genetic operators mutation and crossover and will Finally, the members of the optimal fitness values are selected as the solution set. The optimal output of Petri nets CPN TOOLS modeling and software have been implemented. The results indicate that the performance improvement project in intersections traffic control systems. It is known that other data collected and enforced intersections of evolutionary methods such as genetic algorithms to reduce the waiting time for traffic lights behind the red lights and to determine the appropriate cycle.
Compressed fuzzy logic based multi-criteria AODV routing in VANET environmentIJECEIAES
Vehicular ad hoc networks (VANETs) are the core of intelligent transportation systems (ITS) to obtain safety, better transportation services, and improved traffic management. Providing more reliable and efficient on demand routing protocol is one of the main challenges in these networks research scope. This paper argues a compressed fuzzy logic based method to enhance Ad hoc on demand distance vector (AODV) routing decision by jointly considering number of relays, distance factor, direction angle, and vehicles speed variance. The proposed scheme is simulated in both freeway and urban scenarios with different number of vehicles using real time interaction between both OMNet++ and SUMO simulators. Simulation results show that the proposed approach can get better performance in terms of packet delivery ratio, throughput, mean delay, and number of sent control packets.
Conflict-free dynamic route multi-agv using dijkstra Floyd-warshall hybrid a...IJECEIAES
Autonomous Guided Vehicle is a mobile robot that can move autonomously on a route or lane in an indoor or outdoor environment while performing a series of tasks. Determination of the shortest route on an autonomous guided vehicle is one of the optimization problems in handling conflict- free routes that have an influence on the distribution of goods in the manufacturing industry's warehouse. Pickup and delivery processes in the distribution on AGV goods such as scheduling, shipping, and determining the route of vehicle with short mileage characteristics, is very possible to do simulations with three AGV units. There is a windows time limit on workstations that limits shipping. The problem of determining the route in this study is considered necessary as a multi-vehicle route problem with a time window. This study aims to describe the combination of algorithms written based on dynamic programming to overcome the problem of conflict-free AGV routes using time windows. The combined approach of the Dijkstra and Floyd-Warshall algorithm results in the optimization of the closest distance in overcoming conflict-free routes.
Help the Genetic Algorithm to Minimize the Urban Traffic on IntersectionsIJORCS
Control of traffic lights at the intersections of the main issues is the optimal traffic. Intersections to regulate traffic flow of vehicles and eliminate conflicting traffic flows are used. Modeling and simulation of traffic are widely used in industry. In fact, the modeling and simulation of an industrial system is studied before creating economically and when it is affordable. The aim of this article is a smart way to control traffic. The first stage of the project with the objective of collecting statistical data (cycle time of each of the intersection of the lights of vehicles is waiting for a red light) steps where the data collection found optimal amounts next it is. Introduced by genetic algorithm optimization of parameters is performed. GA begin with coding step as a binary variable (the range specified by the initial data set is obtained) will start with an initial population and then a new generation of genetic operators mutation and crossover and will Finally, the members of the optimal fitness values are selected as the solution set. The optimal output of Petri nets CPN TOOLS modeling and software have been implemented. The results indicate that the performance improvement project in intersections traffic control systems. It is known that other data collected and enforced intersections of evolutionary methods such as genetic algorithms to reduce the waiting time for traffic lights behind the red lights and to determine the appropriate cycle.
Compressed fuzzy logic based multi-criteria AODV routing in VANET environmentIJECEIAES
Vehicular ad hoc networks (VANETs) are the core of intelligent transportation systems (ITS) to obtain safety, better transportation services, and improved traffic management. Providing more reliable and efficient on demand routing protocol is one of the main challenges in these networks research scope. This paper argues a compressed fuzzy logic based method to enhance Ad hoc on demand distance vector (AODV) routing decision by jointly considering number of relays, distance factor, direction angle, and vehicles speed variance. The proposed scheme is simulated in both freeway and urban scenarios with different number of vehicles using real time interaction between both OMNet++ and SUMO simulators. Simulation results show that the proposed approach can get better performance in terms of packet delivery ratio, throughput, mean delay, and number of sent control packets.
Adaptive traffic lights based on traffic flow prediction using machine learni...IJECEIAES
Traffic congestion prediction is one of the essential components of intelligent transport systems (ITS). This is due to the rapid growth of population and, consequently, the high number of vehicles in cities. Nowadays, the problem of traffic congestion attracts more and more attention from researchers in the field of ITS. Traffic congestion can be predicted in advance by analyzing traffic flow data. In this article, we used machine learning algorithms such as linear regression, random forest regressor, decision tree regressor, gradient boosting regressor, and K-neighbor regressor to predict traffic flow and reduce traffic congestion at intersections. We used the public roads dataset from the UK national road traffic to test our models. All machine learning algorithms obtained good performance metrics, indicating that they are valid for implementation in smart traffic light systems. Next, we implemented an adaptive traffic light system based on a random forest regressor model, which adjusts the timing of green and red lights depending on the road width, traffic density, types of vehicles, and expected traffic. Simulations of the proposed system show a 30.8% reduction in traffic congestion, thus justifying its effectiveness and the interest of deploying it to regulate the signaling problem in intersections.
A novel k-means powered algorithm for an efficient clustering in vehicular ad...IJECEIAES
Considerable attention has recently been given to the routing issue in vehicular ad-hoc networks (VANET). Indeed, the repetitive communication failures and high velocity of vehicles reduce the efficacy of routing protocols in VANET. The clustering technique is considered an important solution to overcome these difficulties. In this paper, an efficient clustering approach using an adapted k-means algorithm for VANET has been introduced to enhance network stability in a highway environment. Our approach relies on a clustering scheme that accounts for the network characteristics and the number of connected vehicles. The simulation indicates that the proposed approach is more efficient than similar schemes. The results obtained appear an overall increase in constancy, proven by an increase in cluster head lifetime by 66%, and an improvement in robustness clear in the overall reduction of the end-to-end delay by 46% as well as an increase in throughput by 74%.
International Journal of Computational Engineering Research (IJCER) ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology
Performance Evaluation of GPSR Routing Protocol for VANETs using Bi-direction...CSCJournals
Routing in Vehicular Adhoc Networks is a challenging task where the nodes themselves are vehicles. The mobility factors such as beacon intervals and vehicles with different velocities may cause inaccuracy in the identification of the vehicle's position. This in turn affects the performance of the position based routing protocols. Further, there is a need to evaluate through simulations performance of the position based routing protocol, especially in urban realistic scenarios for VANETs. The work in this paper evaluates the performance of Greedy Perimeter Stateless Routing protocol (GPSR) for VANETs which is a popular position based protocol especially for routing in MANETs. In order to evaluate realistic simulation environment bi-directional coupling of OMNET++/ INET Framework and SUMO is chosen for Nagarbhavi region in Bengaluru, India. The simulations are done for various scenarios realizing the impact of mobility parameters on routing using GPSR, and performance is measured in terms of packet delivery ratio and throughput.
Performance evaluation of dynamic source routing protocol with variation in t...IJECEIAES
Mobile ad-hoc network (MANET) is a set of mobile wireless nodes (devices) which is not rely on a fixed infrastructure. In MANETs, each device is responsible for routing its data according to a specific routing protocol. The three most common MANET routing protocols are: dynamic source routing protocol (DSR), optimized link state routing protocol (OLSR), and ad-hoc on-demand distance vector (AODV). This paper proposes an efficient evaluation of DSR protocol by testing the MANETs routing protocol with variation in transmission power at different speeds. The performance analysis has been given using optimized network engineering tools (OPNET) modeler simulations and evaluated using metrics of average end to end delay and throughput. The results show that the throughput increases as the transmission power increases up to a certain value after which the throughput decreases, also the network work optimally at a certain transmission power which varied at different speed.
The International Journal of Engineering and Science (The IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
A collaborated genetic with lion optimization algorithms for improving the qu...IAESIJAI
Vehicular ad-hoc network (VANET) is dynamic and it works on various
noteworthy applications in intelligent transportation systems (ITS). In
general, routing overhead is more in the VANETs due to their properties.
Hence, need to handle this issue to improve the performance of the
VANETs. Also due to its dynamic nature collision occurs. Up till now, we
have had immense complexity in developing the multi-constrained network
with high quality of forwarding (QoF). To solve the difficulties especially to
control the congestion this paper introduces an enhanced genetic algorithm-based lion optimization for QoF-based routing protocol (EGA-LOQRP) in
the VANET network. Lion optimization routing protocol (LORP) is an
optimization-based routing protocol that can able to control the network with
a huge number of vehicles. An enhanced genetic algorithm (EGA) is
employed here to find the best possible path for data transmission which
leads to meeting the QoF. This will result in low packet loss, delay, and
energy consumption of the network. The exhaustive simulation tests
demonstrate that the EGA-LOQRP routing protocol improves performance
effectively in the face of congestion and QoS assaults compared to the
previous routing protocols like Ad hoc on-demand distance vector (AODV),
ant colony optimization-AODV (ACO-AODV) and traffic aware segment-AODV (TAS-AODV).
CREATING DATA OUTPUTS FROM MULTI AGENT TRAFFIC MICRO SIMULATION TO ASSIMILATI...cscpconf
The intensive development of traffic engineering and technologies that are integrated into vehicles, roads and their surroundings, bring opportunities of real time transport mobility modeling. Based on such model it is then possible to establish a predictive layer that is capable of predicting short and long term traffic flow behavior. It is possible to create the real time model of traffic mobility based on generated data. However, data may have different geographical, temporal or other constraints, or failures. It is therefore appropriate to develop tools that artificially create missing data, which can then be assimilated with real data. This paper presents a mechanism describing strategies of generating artificial data using microsimulations. It describes traffic microsimulation based on our solution of multiagent framework over which a system for generating traffic data is built. The system generates data of a structure corresponding to the data acquired in the real world.
Route optimization problem using vehicle routing problem (VRP) and time window constraint is explained as finding paths for a finite count of vehicles to provide service to a huge number of customers and hence, optimizing the
path in a given duration of the time window. The vehicles in the loop have restricted intake of capacity. This path initiates from the depot, delivers the
goods, and stops at the depot. Each customer is to serve exactly once. If the arrival of the vehicle is before the time window “opens” or when the time window “closes,” there will be waiting for cost and late cost. The challenge involved over here is to scheduling visits to customers who are only
available during specific time windows. Ant colony optimization (ACO) algorithm is a meta-heuristic algorithm stimulated by the growing behaviour of real ants. In this paper, we combine the ACO algorithm with graph network henceforth increasing the number of vehicles in a particular depot for increasing the efficiency for timely delivery of the goods in a particular
time width. This problem is solved by, an efficient technique known as the ACO+graph algorithm.
Adaptive traffic lights based on traffic flow prediction using machine learni...IJECEIAES
Traffic congestion prediction is one of the essential components of intelligent transport systems (ITS). This is due to the rapid growth of population and, consequently, the high number of vehicles in cities. Nowadays, the problem of traffic congestion attracts more and more attention from researchers in the field of ITS. Traffic congestion can be predicted in advance by analyzing traffic flow data. In this article, we used machine learning algorithms such as linear regression, random forest regressor, decision tree regressor, gradient boosting regressor, and K-neighbor regressor to predict traffic flow and reduce traffic congestion at intersections. We used the public roads dataset from the UK national road traffic to test our models. All machine learning algorithms obtained good performance metrics, indicating that they are valid for implementation in smart traffic light systems. Next, we implemented an adaptive traffic light system based on a random forest regressor model, which adjusts the timing of green and red lights depending on the road width, traffic density, types of vehicles, and expected traffic. Simulations of the proposed system show a 30.8% reduction in traffic congestion, thus justifying its effectiveness and the interest of deploying it to regulate the signaling problem in intersections.
A novel k-means powered algorithm for an efficient clustering in vehicular ad...IJECEIAES
Considerable attention has recently been given to the routing issue in vehicular ad-hoc networks (VANET). Indeed, the repetitive communication failures and high velocity of vehicles reduce the efficacy of routing protocols in VANET. The clustering technique is considered an important solution to overcome these difficulties. In this paper, an efficient clustering approach using an adapted k-means algorithm for VANET has been introduced to enhance network stability in a highway environment. Our approach relies on a clustering scheme that accounts for the network characteristics and the number of connected vehicles. The simulation indicates that the proposed approach is more efficient than similar schemes. The results obtained appear an overall increase in constancy, proven by an increase in cluster head lifetime by 66%, and an improvement in robustness clear in the overall reduction of the end-to-end delay by 46% as well as an increase in throughput by 74%.
International Journal of Computational Engineering Research (IJCER) ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology
Performance Evaluation of GPSR Routing Protocol for VANETs using Bi-direction...CSCJournals
Routing in Vehicular Adhoc Networks is a challenging task where the nodes themselves are vehicles. The mobility factors such as beacon intervals and vehicles with different velocities may cause inaccuracy in the identification of the vehicle's position. This in turn affects the performance of the position based routing protocols. Further, there is a need to evaluate through simulations performance of the position based routing protocol, especially in urban realistic scenarios for VANETs. The work in this paper evaluates the performance of Greedy Perimeter Stateless Routing protocol (GPSR) for VANETs which is a popular position based protocol especially for routing in MANETs. In order to evaluate realistic simulation environment bi-directional coupling of OMNET++/ INET Framework and SUMO is chosen for Nagarbhavi region in Bengaluru, India. The simulations are done for various scenarios realizing the impact of mobility parameters on routing using GPSR, and performance is measured in terms of packet delivery ratio and throughput.
Performance evaluation of dynamic source routing protocol with variation in t...IJECEIAES
Mobile ad-hoc network (MANET) is a set of mobile wireless nodes (devices) which is not rely on a fixed infrastructure. In MANETs, each device is responsible for routing its data according to a specific routing protocol. The three most common MANET routing protocols are: dynamic source routing protocol (DSR), optimized link state routing protocol (OLSR), and ad-hoc on-demand distance vector (AODV). This paper proposes an efficient evaluation of DSR protocol by testing the MANETs routing protocol with variation in transmission power at different speeds. The performance analysis has been given using optimized network engineering tools (OPNET) modeler simulations and evaluated using metrics of average end to end delay and throughput. The results show that the throughput increases as the transmission power increases up to a certain value after which the throughput decreases, also the network work optimally at a certain transmission power which varied at different speed.
The International Journal of Engineering and Science (The IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
A collaborated genetic with lion optimization algorithms for improving the qu...IAESIJAI
Vehicular ad-hoc network (VANET) is dynamic and it works on various
noteworthy applications in intelligent transportation systems (ITS). In
general, routing overhead is more in the VANETs due to their properties.
Hence, need to handle this issue to improve the performance of the
VANETs. Also due to its dynamic nature collision occurs. Up till now, we
have had immense complexity in developing the multi-constrained network
with high quality of forwarding (QoF). To solve the difficulties especially to
control the congestion this paper introduces an enhanced genetic algorithm-based lion optimization for QoF-based routing protocol (EGA-LOQRP) in
the VANET network. Lion optimization routing protocol (LORP) is an
optimization-based routing protocol that can able to control the network with
a huge number of vehicles. An enhanced genetic algorithm (EGA) is
employed here to find the best possible path for data transmission which
leads to meeting the QoF. This will result in low packet loss, delay, and
energy consumption of the network. The exhaustive simulation tests
demonstrate that the EGA-LOQRP routing protocol improves performance
effectively in the face of congestion and QoS assaults compared to the
previous routing protocols like Ad hoc on-demand distance vector (AODV),
ant colony optimization-AODV (ACO-AODV) and traffic aware segment-AODV (TAS-AODV).
CREATING DATA OUTPUTS FROM MULTI AGENT TRAFFIC MICRO SIMULATION TO ASSIMILATI...cscpconf
The intensive development of traffic engineering and technologies that are integrated into vehicles, roads and their surroundings, bring opportunities of real time transport mobility modeling. Based on such model it is then possible to establish a predictive layer that is capable of predicting short and long term traffic flow behavior. It is possible to create the real time model of traffic mobility based on generated data. However, data may have different geographical, temporal or other constraints, or failures. It is therefore appropriate to develop tools that artificially create missing data, which can then be assimilated with real data. This paper presents a mechanism describing strategies of generating artificial data using microsimulations. It describes traffic microsimulation based on our solution of multiagent framework over which a system for generating traffic data is built. The system generates data of a structure corresponding to the data acquired in the real world.
Route optimization problem using vehicle routing problem (VRP) and time window constraint is explained as finding paths for a finite count of vehicles to provide service to a huge number of customers and hence, optimizing the
path in a given duration of the time window. The vehicles in the loop have restricted intake of capacity. This path initiates from the depot, delivers the
goods, and stops at the depot. Each customer is to serve exactly once. If the arrival of the vehicle is before the time window “opens” or when the time window “closes,” there will be waiting for cost and late cost. The challenge involved over here is to scheduling visits to customers who are only
available during specific time windows. Ant colony optimization (ACO) algorithm is a meta-heuristic algorithm stimulated by the growing behaviour of real ants. In this paper, we combine the ACO algorithm with graph network henceforth increasing the number of vehicles in a particular depot for increasing the efficiency for timely delivery of the goods in a particular
time width. This problem is solved by, an efficient technique known as the ACO+graph algorithm.
Similar to Urban Bus Route Planning Using Reverse Labeling Dijkstra Algorithm for Temporal Network (20)
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.