different types of solar panel with different uses, different type of solar panel with best price and good efficiency http://www.solarsaving.in/types-of-solar-panel/

1. TYPES OF SOLAR
PANEL
BY: DEEPAK CHHOKAR

2. TYPES OF SOLAR PANEL
solar panel according to their efficiency
and price:
1. Monocrystalline Solar Panels (Mono-SI)
(a)High efficiency rate
(b) optimized for commercial use
(c) high life-time value
(d) Its efficiency is around 20%
(e) Its quite expensive

3. 2. Polycrystalline Solar Panels (p-Si)
(a)Lower price so it is affordable for everyone.
(b) Efficiency is around 15%.
(c) It has slightly less space efficiency.
3. Thin-Film: Amorphous Silicon Solar Panels (A-
SI)
(a)Relatively low costs.
(b)easy to produce & flexible.
(c) The efficiency is between 7 to 10%.
(d) shorter warranties & lifespan.

4. 4. Concentrated PV Cell (CVP)
(a)Very high performance & efficiency rate.
(b) Efficiency is around 41%.
(c) Solar tracker & cooling system is needed
(to reach high efficiency rate).
=>Categories the Different Types of
Solar Panels:
1.Single-junction and multi-junctions(1st
gen,2gen,3gen)

5. ~ The difference between the Single-junction
and multi-junctions is the number of layers on
the solar panel that will observe the sunlight.
~ The materials and efficiency is classified by
the generation of the different types of solar
panels.
Generation of solar panels are:
1}1st Generation Solar Panels
2}2nd Generation Solar Panels
3}3rd Generation Solar Panels

6. 1}1st Generation Solar Panels
These are the traditional types of solar
panels made of monocrystalline silicon or
polysilicon and are most commonly used in
conventional surroundings.
• (a ) Monocrystalline Solar Panels (Mono-SI)

7. • This is made up monocrystalline silicon that is
the purest one.
• It can be identified uniform dark look and
the rounded edges.
• It has highest efficiency rate more then 20%.
• They occupy less space and last the longest.
2} . Polycrystalline solar panel
> This type of solar panels has squares, its
angles are not cut, and it has a blue, speckled
look.

8. • Made of melting row silicon.
• Lower space efficiency and shorter lifespan.
2nd Generation Solar Panels:
Mainly used for photovoltaic power stations,
integrated in buildings or smaller solar power
systems.
1> Thin-Film Solar Cells (TFSC)
These are manufactured by placing one or
more films of photovoltaic material.

9. =>They are also flexible.
=> It is less affected by high temperatures.
Amorphous Silicon Solar Cell (A-Si)
These are mainly used as pocket calculators.
 A-Si-Cells are relatively low in cost.
3rd Generation Solar Panels:
Third generation solar panels include a variety of
thin film technologies.
Most of them are still in the research or
development phase.

10. Biohybrid Solar Cell
=>The Biohybrid solar cell is one of the types of
solar panels, that is still in the research phase.
Cadmium Telluride Solar Cell (CdTe)
=>The photovoltaic technique uses Cadmium
Telluride.
=> Solar cells at relatively low cost
Concentrated PV Cell (CVP and HCVP)
=> They have high efficiency around 41%.
=> Its efficiency is increased by its curved mirror
surface and lenses.