The document describes an online total carbon analyzer that can be used to monitor water quality in factories, mines, sewage treatment plants, and other industrial facilities. It works by converting organic carbon in water samples into carbon dioxide gas, which is then measured with an infrared detector to determine the total carbon content. The analyzer has a simple structure that is easy to maintain and can reliably detect total organic carbon at rates higher than other common water quality tests. It provides real-time monitoring and is suitable for measuring water quality in various industrial processes.

1. Online Total Carbon Analyzer
Factory and mine enterprise
Sewage treatment plant
FEATURES
11
Online Total Carbon Analyzer
Online total organic carbon analyzer adopts the wet oxidation method to totally convert the organic
carbon in the sample into CO The generated CO is directly measured by the infrared detector, and2. 2
then it converts the CO into carbon content.2
Simple Structure, easy to maintain and upgrade.
Suitable for the water quality monitor.
APPLICATION
Online total organic carbon analyzer adopts the wet oxidation method to totally convert the organic carbon
in the sample into CO The generated CO is directly measured by the infrared detector, and then it converts2. 2
the CO into carbon content. The instruments of this series have simple structure. It connects conveniently.2
It is easy to maintain and upgrade. It is suitable for the water quality monitor of factory and mine enterprise,
sewage treatment plant, semiconductor manufacture, water and environmental monitoring department.
The detection rate of the TOC is higher and stable than that of the BOD and COD. TOC is usually be used to
evaluate the organic substance pollution degree of the water.
INTRODUCTION
Semiconductor manufacture
Water and environmental monitoring department

2. TECHNICAL INFORMATION
Please provide working condition in detail which includes the applied occasions, the measurement
medium, the medium status (temperature, pressure, density, etc.), reaction process and installation
method, etc. Then our sales staff will do the selection for you.
Order Instruction Factory standard configuration. If you have other requirements, please consult with
us when you make an order.
Warranty: One year warranty for the transmitter and jacket. No warranty for the electrochemical
sensor. Artificial damage, charge cost fee.
ORDER INFO
Administrative & Sales Office: 25/N, Laxmi Industrial Estate, New Link Road, Andheri (W), Mumbai - 400 053, India. Tel: +91 22 4295 2180 / 81.
Webstie: | Email:www.hnlsystems.com sales@hnlsystems.com
HNL SYSTEMS PVT. LTD.
12
Measurement range (It is adjustable according to the order.)
0~50mg.c/L、0~500mg.c/L、0~5000mg.c/L
Repeatability: 3%
Stability: 3%
Response time: 15 min
Water provision:The solid particles are not bigger than 100 μm. The chloride ion content is not more
than 1000ppm. If it is more than 1000ppm, the halide trap accessories must be added. It cannot react
with the phosphoric acid to produce sediments. If it produces sediment, part of the liquid flow
structure should be changed. Please contact our company in time.
Ambient temperature: 2~40 ℃
Relative humidity：RH0~90%
Power supply: AC220V/50Hz 1000W
Output:When the measurement is constant, the display equipment indicates the instantaneous value,
average value/6 min, average value/ hour and average value/day.
Analog voltage<optional>
Alarm signal, allows 220V/1A load
Output 0~10mA <optional> or 4~20mA electric current<optional>
RS232<optional> RS485<optional>
GPRS wireless communication <optional>
Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria
for every product. Due to endee’s commitment to research, design and product improvement, specifications are subject to change without notice.
Gas Monitor, Gas Analyzer, Transmitters, Humidity Moisture Dew Point Analyzer, Dew Point Transmitters,
Sampling Systems, UV Flame Detector, Dust Monitor