complete presentation on Smart Irrigation system using thingspeak technology is mainly helpful for the farmer to monitor the crop fields. Thingspeak is a platform, we can login with our matlab credentials.this system highly used in Mushroom cultivation because Mushroom cultivation is complete done in a perticuler Room, so this system will monitor the room Humidity, temperature, light and AirQuality. the hole process is we can monitor from any where in the world with help of Thingspeak platform.
complete presentation on Smart Irrigation system using thingspeak technology is mainly helpful for the farmer to monitor the crop fields. Thingspeak is a platform, we can login with our matlab credentials.this system highly used in Mushroom cultivation because Mushroom cultivation is complete done in a perticuler Room, so this system will monitor the room Humidity, temperature, light and AirQuality. the hole process is we can monitor from any where in the world with help of Thingspeak platform.
With the increase in need of water for irrigation, there is also a case where we use more water for irrigation than it’s needed for crops. That results in the wastage of water and causes the problem in the growth of crops. To overcome this problem, this paper puts together a study of a system based on Irrigation using IOT (Internet of things). This system targets on sensing the soil moisture and temperature using the sensors and provide the data to the Thing speak server after which the farmer can decide whether to ON or OFF the pump.
Automatic Irrigation System is a prototype for a system of irrigation or watering automatically based on the Arduino microcontroller integrated with proximity sensors (Ultrasonic Sensor), the DC motor and the pump using LED indicator lights.
Made by :
Andika Jamal Nurganda 151611004
Putri Sintia Sari 151611021
Rizki Verdian 151611025
Refrigeration and Air Conditioning Engineering
Polytechnic State of Bandung
2016
This Project and presentation is created by 'Shanjedul Hassan'
ABSTRACT
Despite the perception people may have regarding the agricultural process, the reality is that today’s agriculture industry is data-cantered, precise, and smarter than ever. The rapid emergence of the Internet-of-Things (IoT) based technologies redesigned almost every industry including ‘‘smart agriculture’’ which moved the industry from statistical to quantitative approaches. Such revolutionary changes are shaking the existing agriculture methods and creating new opportunities along with a range of challenges. This article highlights the potential of wireless sensors and IoT in agriculture, as well as the challenges expected to be faced when integrating this technology with the traditional farming practices. IoT devices and communication techniques associated with wireless sensors encountered in agriculture applications are analyzed in detail. What sensors are available for specific agriculture application, like soil preparation, crop status, irrigation, insect, and pest detection are listed. How this technology helping the growers throughout the crop stages, from sowing until harvesting, packing, and transportation is explained. Furthermore, the use of unmanned aerial vehicles for crop surveillance and other favourable applications such as optimizing crop yield is considered in this article. State-of-the-art IoT-based architectures and platforms used in agriculture are also highlighted wherever suitable. Finally, based on this thorough review, we identify current and future trends of IoT in agriculture and highlight potential research challenges.
This is the first presentation of my Final Year project done(doing 2015-16) as part of fulfilling my B-Tech degree in CSE from Govt. Engineering College Sreekrishnapuram, Palakkad, Kerala, India.
The purpose of this project is to control robot with an interface board of the Raspberry Pi, sensors and software to full fill real time requirement.
Controlling DC motors, different sensors, camera interfacing with raspberry Pi using GPIO pin.
Live streaming, Command the robot easily, sends data of different sensors which works automatically or control from anywhere at any time.
Design of the website and control page of robot is done using Java tools and HTML. This system works on IOT concept.
This will enable Raspberry Pi to be used for more robotic applications and cut down the cost for building an IOT Robot.
With the increase in need of water for irrigation, there is also a case where we use more water for irrigation than it’s needed for crops. That results in the wastage of water and causes the problem in the growth of crops. To overcome this problem, this paper puts together a study of a system based on Irrigation using IOT (Internet of things). This system targets on sensing the soil moisture and temperature using the sensors and provide the data to the Thing speak server after which the farmer can decide whether to ON or OFF the pump.
Automatic Irrigation System is a prototype for a system of irrigation or watering automatically based on the Arduino microcontroller integrated with proximity sensors (Ultrasonic Sensor), the DC motor and the pump using LED indicator lights.
Made by :
Andika Jamal Nurganda 151611004
Putri Sintia Sari 151611021
Rizki Verdian 151611025
Refrigeration and Air Conditioning Engineering
Polytechnic State of Bandung
2016
This Project and presentation is created by 'Shanjedul Hassan'
ABSTRACT
Despite the perception people may have regarding the agricultural process, the reality is that today’s agriculture industry is data-cantered, precise, and smarter than ever. The rapid emergence of the Internet-of-Things (IoT) based technologies redesigned almost every industry including ‘‘smart agriculture’’ which moved the industry from statistical to quantitative approaches. Such revolutionary changes are shaking the existing agriculture methods and creating new opportunities along with a range of challenges. This article highlights the potential of wireless sensors and IoT in agriculture, as well as the challenges expected to be faced when integrating this technology with the traditional farming practices. IoT devices and communication techniques associated with wireless sensors encountered in agriculture applications are analyzed in detail. What sensors are available for specific agriculture application, like soil preparation, crop status, irrigation, insect, and pest detection are listed. How this technology helping the growers throughout the crop stages, from sowing until harvesting, packing, and transportation is explained. Furthermore, the use of unmanned aerial vehicles for crop surveillance and other favourable applications such as optimizing crop yield is considered in this article. State-of-the-art IoT-based architectures and platforms used in agriculture are also highlighted wherever suitable. Finally, based on this thorough review, we identify current and future trends of IoT in agriculture and highlight potential research challenges.
This is the first presentation of my Final Year project done(doing 2015-16) as part of fulfilling my B-Tech degree in CSE from Govt. Engineering College Sreekrishnapuram, Palakkad, Kerala, India.
The purpose of this project is to control robot with an interface board of the Raspberry Pi, sensors and software to full fill real time requirement.
Controlling DC motors, different sensors, camera interfacing with raspberry Pi using GPIO pin.
Live streaming, Command the robot easily, sends data of different sensors which works automatically or control from anywhere at any time.
Design of the website and control page of robot is done using Java tools and HTML. This system works on IOT concept.
This will enable Raspberry Pi to be used for more robotic applications and cut down the cost for building an IOT Robot.
The first model of Raspberry Pi was developed in the UK for the promotion of teaching basic computer science in schools. It has size that of a credit card and can be plugged into computer monitor or TV, and has the capability of doing everything a Desktop PC can do.
Android/GUI Controlled Bluetooth Spy Robot (SPY-BOT)IJERA Editor
The robotic vehicle can be controlled by a PC or an android device. The GUI interface used to control the robot is developed in MATLAB, and the android app is developed using MIT appinventor 2. The robotic vehicle is equipped with an IP web camera for GUI interface and another wireless camera having night vision capability for remote monitoring/spying purposes. This system can be used in sensitive areas where humans cannot enter directly. The commands provided by android application/GUI interface are used to move the robot in front, back and left right directions. The vehicle consists of a Bluetooth receiver interfaced to a PIC microcontroller. On receiving command from the receiver, the PIC microcontroller operates on the movement of motor through a driver IC. The android device or laptop can operate the vehicle at a good Bluetooth communication range. The night vision camera mounted on robot allows for efficient spying even in darkest areas using infrared lighting.
complete Lab manual as Per AKTU syllabus that file contains Internet of Things they contains following topic
1. Familiarization with concept of IoT,
Arduino/Raspberry Pi and perform necessary
software installation.
Will be able to understand IoT,
Arduino/Raspberry Pi, and also able to
install software setup of Arduino/
Respberry Pi
2
To interface motor using relay with
Arduino/Raspberry Pi and write a program to
turn ON/OFF motor.
Able to use relay to control motor and
other mechanical devices
3
To interface sensors* with Arduino/Raspberry Pi
and write a program to displaysensors data on
the computer screen.
Able to retrieve data from sensors and to
display it on computer screen
4 To interface OLED with Arduino/Raspberry Pi
and write a program to display sensor data on it.
Able to retrieve data from sensors and to
display it on OLED
5
To interface sensor with Arduino/Raspberry Pi
and write a program to turn ON/OFF Relay when
sensor data is detected.
Able to control relay with help of
microcontroller and sensors
6
To interface sensor with Arduino/Raspberry Pi
and write a program to turn ON/OFF Solenoid
valve when sensor data is detected.
Able to control Solenoid valve with help of
microcontroller and sensors
7
To interface sensor with Arduino/Raspberry Pi
and write a program to turn ON/OFF Linear
Actuator when sensor data is detected.
Able to control linear actuator with help
of microcontroller and sensors
8
To interface sensor with Arduino/Raspberry Pi
and write a program to turn ON/OFF Starter
Motor when sensor data is detected.
Able to control Starter Motor with help of
microcontroller and sensors
9
To interface Bluetooth with Arduino/Raspberry
Pi and write a program to send sensor data to
smart phone using Bluetooth.
Able to communicate sensor data from
microcontroller to smart phone
10
To interface Bluetooth with Arduino/Raspberry
Pi and write a program to turn Actuators*
ON/OFF when message is received from smart
phone using Bluetooth.
Able to control actuators using mobile
phone through Bluetoth
11 Write a program on Arduino/Raspberry Pi to
upload Sensor data to thingspeak cloud.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Executive Directors Chat Leveraging AI for Diversity, Equity, and InclusionTechSoup
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Safalta Digital marketing institute in Noida, provide complete applications that encompass a huge range of virtual advertising and marketing additives, which includes search engine optimization, virtual communication advertising, pay-per-click on marketing, content material advertising, internet analytics, and greater. These university courses are designed for students who possess a comprehensive understanding of virtual marketing strategies and attributes.Safalta Digital Marketing Institute in Noida is a first choice for young individuals or students who are looking to start their careers in the field of digital advertising. The institute gives specialized courses designed and certification.
for beginners, providing thorough training in areas such as SEO, digital communication marketing, and PPC training in Noida. After finishing the program, students receive the certifications recognised by top different universitie, setting a strong foundation for a successful career in digital marketing.
1. Smart Phone Based Robotic Arm
Control Using Raspberry Pi,
Android and Wi-Fi
Chikku Jacob Joseph
S5 MCALE
Roll. No :: 07
Reg No :: 502007
Amal Jyothi College Of Engineering
Under the Guideness of
Ass.Prof Lisha Varghese
Department Of Computer Application
1
3. Introduction
Robots are increasingly being integrated into working task to replace humans
especially to work on repeated actions.
internet is just at the tip of your finger. This is an advantage where we can to
introduce robot to household works.
Mostly the internet controlled robots will be wired these wired robots have
some space limitation. So to avoid the limitation, the robotic control is made
wireless that is, it is controlled by Wi-Fi.
3
4. RASPBERRY PI
The Raspberry Pi is the work of the Raspberry Pi Foundation, a
charitable organisation.
UK registered charity (No. 1129409), May 2009
It's supported by the University of Cambridge Computer Laboratory and
tech firm Broadcom
4
5. The Raspberry Pi is a fully featured micro-computer squashed onto a circuit
board
measuring approximately 9cm x 5.5cm.
The Raspberry Pi is a credit-card sized computer that plugs into your TV
and a keyboard, which can be used for many of the things that your
average desktop does
Features are inexpensive ,simple, Open & easy to maintain
The Raspberry Pi Foundation started off with a 256MB RAM, labelled as
Model A, and later made a Model B with 512MB RAM.
5
8. GPIO[General Purpose Input Output]
These pins are a physical interface between the Pi and the outside world.
Seventeen of the 26 pins are GPIO pins; the others are power or ground
pins.
You can program the pins to interact in amazing ways with the real world.
8
9. ROBOTIC ARM
The robotic arm has four rotational joints, the base, shoulder, elbow and wrist
The base rotates the arm around the vertical z-axis, while the other three
rotate it around the x-axis
9
11. ANDROID APPLICATION
Android application is an application build in the android platform
A signal is generated on clicking a specific buttons on the android application which
allows the raspberry pi to make the arm move according to the predefined program.
Here Android application being the command centre of the robotic arm as it commands
the arm to move or grab.
11
12. SYSTEM ARCHITECTURE
The smart phone is developed by the latest technology based on the Android platform.
The raspberry pi is connected to the android using the Wi-Fi network.
An android application which gives the signal as the instruction to the raspberry pi and the
robotic arm is controlled.
The four movements can be controlled according to the different instruction given.
12
13. The interfacing of the motors of the robotic arm with the Raspberry Pi is
shown in the figure
The robotic arm has 5 motors, so 3 motor driver ICs are required for the
control of all the joints of the robotic arm.
A triple L293 driver board which consists of three L293D motor driver
ICs is designed for the control of all the motors and is interfaced with
the GPIO pins of Raspberry Pi.
A total of 15 GPIO pins of Raspberry Pi are used for the control of all
the joints of robotic arm
13
15. CONCLUSION
The Raspberry Pi can be used for the control of a Robotic Arm with Smartphone from a
remote area.
The present scenario internet controlled robot has several disadvantages such as wired
restrictions and server problems.
In this Smartphone technique the delay and server problems are reduced as the Wi-Fi is
used which is the fastest usage of internet
15