Smart distribution board with Wi-Fi
โขDownload as PPTX, PDFโข
1 likeโข624 views
This document describes a smart distribution board project with Wi-Fi capabilities. The project aims to create a system that can identify electrical defects in real-time and warn users. It uses an ESP8266 board to connect the distribution board to Wi-Fi. A PZEM-004T sensor measures voltage, current, power and energy. The system is scalable to control multiple devices and supports home automation applications like power and security management.
Report
Share
Report
Share
Recommended
Automated water planting system
This project summary describes an automated plant watering system. It uses sensors to measure soil moisture and temperature. An Arduino microcontroller processes the sensor readings and controls a solenoid valve to water the plants when the soil is dry. The system provides wireless communication through a Zigbee module for remote control. The document outlines the components, circuit diagram, working mechanism, advantages and applications of the automated irrigation system.
Final year report on remote control of home appliances via bluetooth
This document is a project report for remotely controlling home appliances using a smartphone. It includes 6 students who worked on the project under the guidance of Prof. Smarajit Maity. The report acknowledges the support received and provides chapters on literature review of similar projects using GSM, IR, DTMF and RF technologies, the previous work done, the proposed project work including block diagrams and programming, results analysis and future scope.
Password Based Circuit Breaker
This password based circuit breaker is built by using 8051 mirocontroller to control a circuit breaker with help of a password only. It provides a solution for the safety of maintenance staff like lineman.
Edgefxkits.com has a wide range of electronic projects ideas that are primarily helpful for ECE, EEE and EIE students and the ideas can be applied for real life purposes as well.
Edgefx provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping
Smart agriculture using iot (fully smart) By using arduino
Full automatic control and also manually control over system by using IOT and many sensors by using arduino
TRAFFIC LIGHT CONTROL SYSTEM USING 8085 MICROPROCESSOR
The document describes a traffic light control system using an 8085 microprocessor. It discusses the need for a traffic light system, describes the basic components including colors and signals. It then covers the hardware details of the 8085-based system and interface board, including ICs used. Algorithms and state diagrams are presented to show the logic for controlling lights and pedestrians.
Humidity and Temperature Measurement Using Arduino
Humidity and temperature are common parameters to measure environmental conditions. In this Arduino based project we are going to measure ambient temperature and humidity and display it on a LCD screen.
Major project presentation
The document describes a proposed automated wireless meter reading system. It would consist of meter reading retrieval units with microcontrollers and Zigbee transceivers attached to electricity meters. A wireless personal area network using Zigbee would transfer meter readings to a handheld device. This would allow readings to be collected remotely without manual inspection, reducing costs and errors. Digital meters would measure voltage, current and power consumption. Readings would be sent via Zigbee and stored on the handheld device for later transfer to a computer database. The system aims to make meter reading easier, more accurate and help utilities better manage electricity distribution.
Smart Door locking system using arduino
This document describes a smart door locking system using an Arduino board. The system uses a keypad to enter a password, which is checked by the Arduino. If the correct password is entered, the Arduino sends a signal to a servo motor to unlock the door. The system aims to provide secure, password-protected access to restricted areas. It uses an Arduino board along with a keypad, servo motor, and LCD display to control a door lock. The document outlines the hardware, software, working mechanism, and concludes the system provides a cost-effective, easy to install smart locking alternative to conventional door locks.
Recommended
Automated water planting system
This project summary describes an automated plant watering system. It uses sensors to measure soil moisture and temperature. An Arduino microcontroller processes the sensor readings and controls a solenoid valve to water the plants when the soil is dry. The system provides wireless communication through a Zigbee module for remote control. The document outlines the components, circuit diagram, working mechanism, advantages and applications of the automated irrigation system.
Final year report on remote control of home appliances via bluetooth
This document is a project report for remotely controlling home appliances using a smartphone. It includes 6 students who worked on the project under the guidance of Prof. Smarajit Maity. The report acknowledges the support received and provides chapters on literature review of similar projects using GSM, IR, DTMF and RF technologies, the previous work done, the proposed project work including block diagrams and programming, results analysis and future scope.
Password Based Circuit Breaker
This password based circuit breaker is built by using 8051 mirocontroller to control a circuit breaker with help of a password only. It provides a solution for the safety of maintenance staff like lineman.
Edgefxkits.com has a wide range of electronic projects ideas that are primarily helpful for ECE, EEE and EIE students and the ideas can be applied for real life purposes as well.
Edgefx provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping
Smart agriculture using iot (fully smart) By using arduino
Full automatic control and also manually control over system by using IOT and many sensors by using arduino
TRAFFIC LIGHT CONTROL SYSTEM USING 8085 MICROPROCESSOR
The document describes a traffic light control system using an 8085 microprocessor. It discusses the need for a traffic light system, describes the basic components including colors and signals. It then covers the hardware details of the 8085-based system and interface board, including ICs used. Algorithms and state diagrams are presented to show the logic for controlling lights and pedestrians.
Humidity and Temperature Measurement Using Arduino
Humidity and temperature are common parameters to measure environmental conditions. In this Arduino based project we are going to measure ambient temperature and humidity and display it on a LCD screen.
Major project presentation
The document describes a proposed automated wireless meter reading system. It would consist of meter reading retrieval units with microcontrollers and Zigbee transceivers attached to electricity meters. A wireless personal area network using Zigbee would transfer meter readings to a handheld device. This would allow readings to be collected remotely without manual inspection, reducing costs and errors. Digital meters would measure voltage, current and power consumption. Readings would be sent via Zigbee and stored on the handheld device for later transfer to a computer database. The system aims to make meter reading easier, more accurate and help utilities better manage electricity distribution.
Smart Door locking system using arduino
This document describes a smart door locking system using an Arduino board. The system uses a keypad to enter a password, which is checked by the Arduino. If the correct password is entered, the Arduino sends a signal to a servo motor to unlock the door. The system aims to provide secure, password-protected access to restricted areas. It uses an Arduino board along with a keypad, servo motor, and LCD display to control a door lock. The document outlines the hardware, software, working mechanism, and concludes the system provides a cost-effective, easy to install smart locking alternative to conventional door locks.
Smart street lighting control system project PPT
This document contains details about a smart street light control system project. It lists the batch members and project guide. The objectives are to reduce energy consumption and inform authorities about any incidents or street light faults using sensors, a camera and GSM modem. It describes the components used like PIR sensor, vibration sensor, camera, microcontroller. It also explains how ThingSpeak cloud platform can be used to store and access real-time sensor data through mobile phones.
MOSFET and Short channel effects
Reduced channel length cause departures from long channel behaviour as two-dimensional potential distribution and high electric fields give birth to Short channel effects.
iot pet feeder report
This document provides a summary report on a pet feeder project based on an Arduino Uno. The project was completed by three students - Harsh Dobariya, Akshay Kalapgar, and Mohit Kamble - under the guidance of their internal guide, Mr. Swapnil Gharat. The report includes an introduction to the project, aims and objectives, a literature review, a description of the proposed system, implementation details, and details of the hardware and software used. The proposed system is an automatic pet feeder controlled by a smartphone that uses a servo motor, Arduino Uno, and Bluetooth module to remotely feed pets based on input from a mobile app.
Lambda design rule
The document discusses layout design rules that specify minimum feature sizes and separations between layers for a chip manufacturing process. Design rules are described using either micron or lambda units. Lambda rules specify widths of diffusion and polysilicon layers as well as minimum separations between layers. There are also design rules for metal layers and forming transistors. The document describes three approaches for contact cuts between polysilicon and diffusion layers: using polysilicon to metal to diffusion, buried contacts, and butting contacts using metal.
8051 interfacing
This consists of Interfacing of 8051 with ADC, DAC, LED, Seven segment Dispaly, Stepper motor, Temperature Sensor etc
Intel 8051 Programming in C
This presentation gives the details about the data types available in Embedded C. It also discusses the pros and cons of writing codes in C for 8051. Different example codes are considered.
IoT based Flood detection system
This document summarizes an IoT-based flood detection system. The system uses sensors like ultrasonic sensors, temperature and humidity sensors connected to an Arduino board to detect water levels and environmental conditions. When flooding is detected, a WiFi module relays the sensor data to the cloud for analysis and alerts. The document discusses the motivation for such a system due to widespread flooding in India. It provides examples of past floods and damage. It then outlines the objectives, methodology, block diagram and components of the proposed IoT system for automatic flood detection and notification.
Alcohol sensing alert with engine locking project
Now a days 90% of accidents happening due to silly reason of alcohol drinking. so we introduce this project for saftey of people and preventing accidents due to alcohol consumption.
automatic streetlight control using ldr ppt
This document describes an automatic street light control circuit using an LDR (Light Dependent Resistor). The circuit uses an LM358 operational amplifier, a relay, an LDR, resistors, a capacitor, a transistor, and a lamp. It works by turning the street light on when the LDR detects low light levels and turning it off when high light levels are detected, thereby automatically controlling the street light and saving energy. The circuit was designed and simulated using Proteus software and implemented on a breadboard.
Internet of Things (IoT) Based Smart Security & Home Automation System.
M A Sayed
Department of Electrical & Electronic Engineering
North Bengal International University, Rajshahi-6100
Helpline: 01744-563778
MPMC LAB MANUAL EEE
The document is a lab manual for a Microprocessor and Microcontroller lab. It contains:
1. An introduction and syllabus covering digital and linear circuits, 8-bit microprocessors and microcontrollers, and various experiments.
2. Details of experiments with an 8-bit microprocessor (8085) including arithmetic operations, sorting/searching arrays, code conversions, and interfacing analog devices.
3. Details of experiments with an 8-bit microcontroller (8051) including programming basics and interfacing devices like stepper motors.
4. Objectives, apparatus, algorithms, programs, procedures, inputs/outputs for each experiment.
Location Finding for blind People Using Voice Navigation Stick Seminar
The voice navigation stick used by the blind people makes use of Ultrasonic and IR sensors to detect obstacles, it also makes use of the GPS system to enhance navigation with the help of speakers, that enables the blind to be independent.
Home automation ppt
This document presents a home automation system using Node MCU. It proposes using Node MCU to control electrical appliances like fans, lights and doors via a smartphone app. The system would allow control of devices from a long distance. It discusses related work on home automation with Node MCU. The proposed work would allow energy savings and home security through remote control and monitoring. A block diagram shows the system components including Node MCU, relay drivers, appliances, and a smartphone app. The methodology describes programming Node MCU to control relays and devices. Testing showed the system can automate home appliances through remote smartphone control.
IOT: Home Automation using Android Application
Mobile devices are ideal in providing a user interface, they are portable and their wide range of capabilities. They can communicate with the Home automation network through an internet gateway, and also it can also directly, as these devices usually implement low power communication protocols, such as Wi-Fi.
Presentation of automatic street light
This seminar report summarizes an automatic street light system that uses an LDR (light dependent resistor) and transistor circuit to automatically turn street lights on at nightfall and off at dawn, saving energy. The main components are an LDR, transistor, resistor, LED, battery, and PCB board. The LDR detects low light levels and allows current to flow through the transistor, powering the LED light. Potential advantages include energy savings, low cost, safety and security from automated operation. Disadvantages include limited power and the light turning on in shadows. It has applications for street and domestic lighting and could save 77-81% of power consumption for street lighting.
Iot based home automation
This document presents a home automation project using an Arduino microcontroller, ESP8266 WiFi module, relays, and a webpage interface. The proposed system allows users to control devices in their home like lights and appliances remotely using a laptop or phone via the internet. It discusses the existing manual home control system, the project's block diagram, hardware and software requirements, advantages like convenience and security, and applications for home automation and internet of things scenarios.
Speed control of DC motor using pulse width modulation technique
Speed control of DC motor using pulse width modulation technique . Here IC 555 timer is used instead of micro controller
Foot Step Power Generation Using Piezoelectric Sensors
This document describes a student project to generate electricity from footstep force using piezoelectric sensors. The project aims to address Pakistan's energy shortages by producing pollution-free and fuel-less energy at crowded locations. The system uses piezoelectric sensors below a plate to convert mechanical energy from footsteps into electrical energy, which is then regulated and stored in a battery using a microcontroller. The document outlines the group members, problem statement, objectives, block diagram, calculations estimating power output from varying numbers of footsteps, and potential future applications of piezoelectric energy harvesting from foot traffic in places like train stations.
Home Automation Using Arduino Uno and HC-05
Controlling the DC motor (as fan) and Light bulb through HC-05 bluetooth module using the bluetooth terminal app from available on play store. The report attached herewith have a detailed description of the Circuit and the code. Interested ones can do further editings also:)
IRJET- Home Automation using Smartplug
This document discusses a smart plug system for home automation using WiFi. The smart plug allows appliances to be remotely controlled and monitored for energy consumption. It uses an ESP32 microcontroller connected to a current sensor to measure appliance energy usage. When a user's smartphone comes within Bluetooth range, the smart plug can automatically turn appliances on or off. The system was tested successfully by controlling a light remotely and monitoring its current draw. The smart plug provides a low-cost way to automate home appliances without disturbing existing controls.
IRJET- Home Automation using Smartplug
This document discusses a smart plug system for home automation using WiFi. The smart plug allows remote control and monitoring of connected appliances. It uses an ESP32 microcontroller connected to a current sensor to measure energy consumption. When a user's smartphone comes within Bluetooth range, the smart plug can automatically turn appliances on and off. The system was experimentally tested and able to remotely control and monitor a light bulb connected to the smart plug over WiFi and the smartphone's Bluetooth signal.
More Related Content
What's hot
Smart street lighting control system project PPT
This document contains details about a smart street light control system project. It lists the batch members and project guide. The objectives are to reduce energy consumption and inform authorities about any incidents or street light faults using sensors, a camera and GSM modem. It describes the components used like PIR sensor, vibration sensor, camera, microcontroller. It also explains how ThingSpeak cloud platform can be used to store and access real-time sensor data through mobile phones.
MOSFET and Short channel effects
Reduced channel length cause departures from long channel behaviour as two-dimensional potential distribution and high electric fields give birth to Short channel effects.
iot pet feeder report
This document provides a summary report on a pet feeder project based on an Arduino Uno. The project was completed by three students - Harsh Dobariya, Akshay Kalapgar, and Mohit Kamble - under the guidance of their internal guide, Mr. Swapnil Gharat. The report includes an introduction to the project, aims and objectives, a literature review, a description of the proposed system, implementation details, and details of the hardware and software used. The proposed system is an automatic pet feeder controlled by a smartphone that uses a servo motor, Arduino Uno, and Bluetooth module to remotely feed pets based on input from a mobile app.
Lambda design rule
The document discusses layout design rules that specify minimum feature sizes and separations between layers for a chip manufacturing process. Design rules are described using either micron or lambda units. Lambda rules specify widths of diffusion and polysilicon layers as well as minimum separations between layers. There are also design rules for metal layers and forming transistors. The document describes three approaches for contact cuts between polysilicon and diffusion layers: using polysilicon to metal to diffusion, buried contacts, and butting contacts using metal.
8051 interfacing
This consists of Interfacing of 8051 with ADC, DAC, LED, Seven segment Dispaly, Stepper motor, Temperature Sensor etc
Intel 8051 Programming in C
This presentation gives the details about the data types available in Embedded C. It also discusses the pros and cons of writing codes in C for 8051. Different example codes are considered.
IoT based Flood detection system
This document summarizes an IoT-based flood detection system. The system uses sensors like ultrasonic sensors, temperature and humidity sensors connected to an Arduino board to detect water levels and environmental conditions. When flooding is detected, a WiFi module relays the sensor data to the cloud for analysis and alerts. The document discusses the motivation for such a system due to widespread flooding in India. It provides examples of past floods and damage. It then outlines the objectives, methodology, block diagram and components of the proposed IoT system for automatic flood detection and notification.
Alcohol sensing alert with engine locking project
Now a days 90% of accidents happening due to silly reason of alcohol drinking. so we introduce this project for saftey of people and preventing accidents due to alcohol consumption.
automatic streetlight control using ldr ppt
This document describes an automatic street light control circuit using an LDR (Light Dependent Resistor). The circuit uses an LM358 operational amplifier, a relay, an LDR, resistors, a capacitor, a transistor, and a lamp. It works by turning the street light on when the LDR detects low light levels and turning it off when high light levels are detected, thereby automatically controlling the street light and saving energy. The circuit was designed and simulated using Proteus software and implemented on a breadboard.
Internet of Things (IoT) Based Smart Security & Home Automation System.
M A Sayed
Department of Electrical & Electronic Engineering
North Bengal International University, Rajshahi-6100
Helpline: 01744-563778
MPMC LAB MANUAL EEE
The document is a lab manual for a Microprocessor and Microcontroller lab. It contains:
1. An introduction and syllabus covering digital and linear circuits, 8-bit microprocessors and microcontrollers, and various experiments.
2. Details of experiments with an 8-bit microprocessor (8085) including arithmetic operations, sorting/searching arrays, code conversions, and interfacing analog devices.
3. Details of experiments with an 8-bit microcontroller (8051) including programming basics and interfacing devices like stepper motors.
4. Objectives, apparatus, algorithms, programs, procedures, inputs/outputs for each experiment.
Location Finding for blind People Using Voice Navigation Stick Seminar
The voice navigation stick used by the blind people makes use of Ultrasonic and IR sensors to detect obstacles, it also makes use of the GPS system to enhance navigation with the help of speakers, that enables the blind to be independent.
Home automation ppt
This document presents a home automation system using Node MCU. It proposes using Node MCU to control electrical appliances like fans, lights and doors via a smartphone app. The system would allow control of devices from a long distance. It discusses related work on home automation with Node MCU. The proposed work would allow energy savings and home security through remote control and monitoring. A block diagram shows the system components including Node MCU, relay drivers, appliances, and a smartphone app. The methodology describes programming Node MCU to control relays and devices. Testing showed the system can automate home appliances through remote smartphone control.
IOT: Home Automation using Android Application
Mobile devices are ideal in providing a user interface, they are portable and their wide range of capabilities. They can communicate with the Home automation network through an internet gateway, and also it can also directly, as these devices usually implement low power communication protocols, such as Wi-Fi.
Presentation of automatic street light
This seminar report summarizes an automatic street light system that uses an LDR (light dependent resistor) and transistor circuit to automatically turn street lights on at nightfall and off at dawn, saving energy. The main components are an LDR, transistor, resistor, LED, battery, and PCB board. The LDR detects low light levels and allows current to flow through the transistor, powering the LED light. Potential advantages include energy savings, low cost, safety and security from automated operation. Disadvantages include limited power and the light turning on in shadows. It has applications for street and domestic lighting and could save 77-81% of power consumption for street lighting.
Iot based home automation
This document presents a home automation project using an Arduino microcontroller, ESP8266 WiFi module, relays, and a webpage interface. The proposed system allows users to control devices in their home like lights and appliances remotely using a laptop or phone via the internet. It discusses the existing manual home control system, the project's block diagram, hardware and software requirements, advantages like convenience and security, and applications for home automation and internet of things scenarios.
Speed control of DC motor using pulse width modulation technique
Speed control of DC motor using pulse width modulation technique . Here IC 555 timer is used instead of micro controller
Foot Step Power Generation Using Piezoelectric Sensors
This document describes a student project to generate electricity from footstep force using piezoelectric sensors. The project aims to address Pakistan's energy shortages by producing pollution-free and fuel-less energy at crowded locations. The system uses piezoelectric sensors below a plate to convert mechanical energy from footsteps into electrical energy, which is then regulated and stored in a battery using a microcontroller. The document outlines the group members, problem statement, objectives, block diagram, calculations estimating power output from varying numbers of footsteps, and potential future applications of piezoelectric energy harvesting from foot traffic in places like train stations.
Home Automation Using Arduino Uno and HC-05
Controlling the DC motor (as fan) and Light bulb through HC-05 bluetooth module using the bluetooth terminal app from available on play store. The report attached herewith have a detailed description of the Circuit and the code. Interested ones can do further editings also:)
What's hot (20)
Internet of Things (IoT) Based Smart Security & Home Automation System.
Internet of Things (IoT) Based Smart Security & Home Automation System.
ย
Location Finding for blind People Using Voice Navigation Stick Seminar
Location Finding for blind People Using Voice Navigation Stick Seminar
ย
Speed control of DC motor using pulse width modulation technique
Speed control of DC motor using pulse width modulation technique
ย
Foot Step Power Generation Using Piezoelectric Sensors
Foot Step Power Generation Using Piezoelectric Sensors
ย
Similar to Smart distribution board with Wi-Fi
IRJET- Home Automation using Smartplug
This document discusses a smart plug system for home automation using WiFi. The smart plug allows appliances to be remotely controlled and monitored for energy consumption. It uses an ESP32 microcontroller connected to a current sensor to measure appliance energy usage. When a user's smartphone comes within Bluetooth range, the smart plug can automatically turn appliances on or off. The system was tested successfully by controlling a light remotely and monitoring its current draw. The smart plug provides a low-cost way to automate home appliances without disturbing existing controls.
IRJET- Home Automation using Smartplug
This document discusses a smart plug system for home automation using WiFi. The smart plug allows remote control and monitoring of connected appliances. It uses an ESP32 microcontroller connected to a current sensor to measure energy consumption. When a user's smartphone comes within Bluetooth range, the smart plug can automatically turn appliances on and off. The system was experimentally tested and able to remotely control and monitor a light bulb connected to the smart plug over WiFi and the smartphone's Bluetooth signal.
IRJET- Multi Plug Control using Internet of Things
This document presents a multi-plug control system using Internet of Things (IoT). The system allows users to control home appliances like lights and fans remotely through a mobile app and the internet. It uses an Arduino microcontroller connected to a WiFi module to receive commands from the app over the internet and control relays connected to devices. The system aims to automate homes and save energy by allowing remote control of devices from anywhere through the internet-connected microcontroller. It provides advantages over manual systems like saving time and being able to control devices from anywhere in the world.
IRJET- Arduino based Smart Grid Power Monitoring and Control by using IoT
This document describes a smart grid power monitoring and control system using IoT. The system uses sensors to monitor the voltage, current and temperature of a 3-phase power system. It can detect faults by comparing the measured voltage to a reference value. When a fault is detected, an alarm is triggered and the fault information is sent to a webpage via WiFi. The system aims to quickly detect faults, protect equipment, and maintain a stable power supply. It is controlled using an Arduino board and sensors, and allows remote monitoring through an IoT connection.
Smart glasses report for computer enginner
This document is a project report on "IOT BASED SMART GLASSES" submitted to the Department of Computer Engineering at V.P.M.P. Polytechnic, Gandhinagar. It was prepared by 4 students - Dhruv Patel, Krushna Patel, Jay Patel, and Krish Patel, under the guidance of Mr. Hardik Patel. The report describes the development of a smart glasses system that can control electronic devices like mobile phones and laptops using eye movements instead of hand controls. It discusses the objectives, working, requirements and future expansion of the IOT based smart glasses system.
Home Automation using NodeMCU .docx
The main objective of this project is to develop a home automation system using an Arduino board with Bluetooth being remotely controlled by any Android OS Smartphone. Modern houses are gradually shifting from conventional switches to centralized control system, involving remote controlled switches
IRJET- Designing of Smart Switch for Home Automation
This document describes a smart switch designed for home automation. The smart switch allows users to control home appliances like lights and fans wirelessly through an Android application or voice commands. It uses an ESP8266 WiFi module to connect appliances to the Adafruit server and relay commands from a smartphone to devices via a relay board. The system provides a low-cost way to automate homes and make appliances accessible remotely or through simple voice controls, offering convenience for all users including those with disabilities. Sensors may also be integrated to allow for automatic control based on temperature or other factors. The smart switch implementation achieves the goals of remote home device management through a mobile-friendly interface.
ESP8266 MICROCONTROLLER APPLICATION IN WIRELESS SYNCHRONIZATION TASKS.pptx
The document discusses using an ESP8266 microcontroller for wireless synchronization tasks in industrial monitoring applications. It proposes using sensors connected to an Arduino and Zigbee module to monitor parameters like temperature, humidity, light levels, and fires. The sensor data would be sent wirelessly to cloud storage via the ESP8266 where it could be viewed on an app. Diagrams show the system setup and components like the regulated power supply, LCD display, and Zigbee module. The system aims to make it easier to add new sensors to existing industrial monitoring systems.
IRJET - IoT based Home Automation System through Voice Control using Google A...
This document describes an IoT-based home automation system that allows control of electrical appliances using voice commands through a Google Assistant app. The system uses an Arduino microcontroller connected to ESP8266 WiFi modules and relays to control appliances. Users can control lights, fans, and other devices remotely using the Blynk app on their smartphone, which sends commands to the Arduino via ESP8266. This provides convenience and saves energy by automating appliance control. The system was tested successfully to control loads by voice commands through the Blynk and Google Assistant apps.
IRJET- Portable Surveillance Robot using IoT
This document describes a portable surveillance robot that uses IoT technology. The robot is able to scale horizontal and vertical surfaces while automatically controlling transitions between surfaces. It transmits live video through a wireless channel to a remote workstation for surveillance purposes. The robot uses an Arduino UNO microcontroller along with a WiFi module, camera, motors, and other hardware. It allows users to both monitor video from the robot and control its movement remotely. The goal is to provide security surveillance to hazardous or hard to access areas without risking human safety.
B03504008012
This document describes a Wi-Fi based notification system that displays messages wirelessly sent from a user. It discusses:
1) The limitations of wired networks and advantages of using wireless Wi-Fi technology for communication.
2) The system design which includes a microcontroller, Wi-Fi module, real-time clock, and LCD display to receive notices over Wi-Fi and display the time and date.
3) The software design including programming the microcontroller to parse Wi-Fi data and control the LCD display.
Deigne and Construction Smart Remote(Smart Phone ) base Home appliance contr...
Deigne and Construction Smart Remote(Smart Phone ) base Home appliance control
Home automation using blynk app with fan direction control and displaying sta...
Home automation using blynk app with fan direction control and displaying sta...Diwash Kapil Chettri
The document presents a mini project on controlling electrical appliances using IoT. The project uses an ESP8266 WiFi module, an L298 motor driver, relay modules, and an LCD display to interface appliances like bulbs, fans, and AC units. A smartphone app allows remote control and monitoring of devices. The system provides convenience, energy savings, and security for smart home automation. Challenges include data security and lack of standards. The project aims to address increasing demand for smart homes with remote control and data collection capabilities.ย
Domotics โ A Cost Effective Smart Home Automation System Using Wifi as Networ...
This paper describes an investigation into the potential for remote controlled operation of home automation (also called as Domotics) systems. It considers problems with their implementation, discusses possible solutions through various network technologies and indicates how to optimize the use of such systems. This paper emphasizes on the design and prototype implementation of new home automation system that uses WiFi technology as a network infrastructure connecting its parts. The proposed can be viewed on two fold; the first part is the software (web server), which presents system core that manages, controls, and monitors usersโ home. Users and system administrator can locally (LAN) or remotely (internet) manage the system code. Second part is hardware interface module, which provides appropriate interface to sensors and actuator of home automation system. Unlike most of available home automation system in the market the proposed system is scalable that one server can manage many hardware interface modules as long as it exists on WiFi network coverage.
Electronics Notice Board Notice board using Wi-Fi Report
This document describes an electronic notice board project using Wi-Fi technology. The notice board displays messages on a matrix LED display that are sent wirelessly from a mobile phone. The system includes an Arduino Uno microcontroller, ESP8266 Wi-Fi module to receive messages, EEPROM memory to store character data, and a control unit to sequentially select the LED matrices. Messages can be changed remotely using a phone, providing flexible control without needing to access the display directly. The project allows for wireless information sharing across various public applications.
Smart home project technical paper
This document describes a smart home project that uses an embedded web server to control various smart home functions. It includes 6 chapters that cover the introduction, main block diagrams, components and cost analysis, design approach and details, schedule and tasks, and conclusion. The introduction defines what a smart home is and describes the features of the project, which aims to implement a low-cost smart home system. The main block diagrams section outlines the use of an Ethernet module, wireless connectivity using ZigBee, and a sensor network with a centralized controller. The design approach provides circuit diagrams and code for an access control system and main control interface.
IRJET - Home Security System using Arduino
This document describes a home security system using an Arduino microcontroller. The system uses various sensors including a PIR motion sensor, temperature sensor, gas sensor, and smoke sensor. An ESP8266 WiFi module connects the system to the internet to allow remote monitoring and control via a mobile app or web application. The system detects intrusions and environmental changes and triggers an alarm. When the PIR sensor detects motion, it sends a notification to the user's phone. This low-cost smart home security system provides remote monitoring and control capabilities while requiring minimal external hardware components.
Network generations
This document appears to be a project report submitted for the requirements of a Bachelor of Technology degree in Electronic and Communication Engineering. It outlines a smart wall switch project that uses an Arduino, Wi-Fi module, relays, buttons, DHT11 sensor, and Blynk app to remotely control household appliances via a mobile phone. The objectives are to create a low-cost, reliable, and scalable smart switch. It then details the various components, block diagram, working, advantages, applications, and concludes more development is needed for commercial use.
Report
The document describes a home automation system using a Node MCU and WiFi technology. The system allows users to control appliances and sensors in their home remotely through a web server or mobile application. It consists of a Node MCU module connected to sensors and actuators through a relay board. The system is scalable, allowing one server to manage multiple hardware interfaces across a WiFi network. It provides a flexible alternative to commercial home automation systems.
IRJET - IoT based Home Automation using ATmega328 Microcontroller
This document describes an IoT-based home automation system using an ATmega328 microcontroller. The system allows controlling home appliances like lights and fans remotely over WiFi. An ATmega328 microcontroller communicates with an ESP8266 WiFi module to send and receive data from a server and control relays connected to appliances. The system provides a user-friendly Android app interface to control appliances from anywhere. It discusses the components used - ATmega328, ESP8266, relays, voltage regulators. The system aims to automate homes and control appliances with clicks from a smartphone for convenience and energy savings.
Similar to Smart distribution board with Wi-Fi (20)
IRJET- Multi Plug Control using Internet of Things
IRJET- Multi Plug Control using Internet of Things
ย
IRJET- Arduino based Smart Grid Power Monitoring and Control by using IoT
IRJET- Arduino based Smart Grid Power Monitoring and Control by using IoT
ย
IRJET- Designing of Smart Switch for Home Automation
IRJET- Designing of Smart Switch for Home Automation
ย
ESP8266 MICROCONTROLLER APPLICATION IN WIRELESS SYNCHRONIZATION TASKS.pptx
ESP8266 MICROCONTROLLER APPLICATION IN WIRELESS SYNCHRONIZATION TASKS.pptx
ย
IRJET - IoT based Home Automation System through Voice Control using Google A...
IRJET - IoT based Home Automation System through Voice Control using Google A...
ย
Deigne and Construction Smart Remote(Smart Phone ) base Home appliance contr...
Deigne and Construction Smart Remote(Smart Phone ) base Home appliance contr...
ย
Home automation using blynk app with fan direction control and displaying sta...
Home automation using blynk app with fan direction control and displaying sta...
ย
Domotics โ A Cost Effective Smart Home Automation System Using Wifi as Networ...
Domotics โ A Cost Effective Smart Home Automation System Using Wifi as Networ...
ย
Electronics Notice Board Notice board using Wi-Fi Report
Electronics Notice Board Notice board using Wi-Fi Report
ย
IRJET - IoT based Home Automation using ATmega328 Microcontroller
IRJET - IoT based Home Automation using ATmega328 Microcontroller
ย
Recently uploaded
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
skeleton System.pdf (skeleton system wow)
๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ
โ โุฅุถุบ ุจูู ุฅูุฏููู
โู
ู ุฃููู ุงูู
ูุงุฒู
ุงูุชู ุตู
ู
ุชูุง
ู
ูุฒู
ุฉ ุชุดุฑูุญ ุงูุฌูุงุฒ ุงูููููู (ูุธุฑู 3)
๐๐๐๐๐๐๐๐๐๐
ุชุชู
ูุฒ ูุฐูู ุงูู
ูุฒู
ุฉ ุจุนูุฏุฉ ู
ูู
ูุฒุงุช :
1- ู
ูุชุฑุฌู
ุฉ ุชุฑุฌู
ุฉ ุชููุงุณุจ ุฌู
ูุน ุงูู
ุณุชููุงุช
2- ุชุญุชูู ุนูู 78 ุฑุณู
ุชูุถูุญู ููู ููู
ุฉ ู
ูุฌูุฏุฉ ุจุงูู
ูุฒู
ุฉ (ููู ููู
ุฉ !!!!)
#ููู
_ู
ุงูู_ุฏุฑุฎ
3- ุฏูุฉ ุงููุชุงุจุฉ ูุงูุตูุฑ ุนุงููุฉ ุฌุฏุงู ุฌุฏุงู ุฌุฏุงู
4- ูููุงูู ุจุนุถ ุงูู
ุนููู
ุงุช ุชู
ุชูุถูุญูุง ุจุดูู ุชูุตููู ุฌุฏุงู (ุชูุนุชุจุฑ ูุฏู ุงูุทุงูุจ ุฃู ุงูุทุงูุจุฉ ุจุฅููุง ู
ุนููู
ุงุช ู
ูุจูู
ุฉ ูู
ุน ุฐูู ุชู
ุชูุถูุญ ูุฐูู ุงูู
ุนููู
ุงุช ุงูู
ูุจูู
ุฉ ุจุดูู ุชูุตููู ุฌุฏุงู
5- ุงูู
ูุฒู
ุฉ ุชุดุฑุญ ููุณูุง ุจ ููุณูุง ุจุณ ุชููู ุชุนุงู ุงูุฑุงูู
6- ุชุญุชูู ุงูู
ูุฒู
ุฉ ูู ุงูู ุณูุงูุฏ ุนูู ุฎุงุฑุทุฉ ุชุชุถู
ู ุฌู
ูุน ุชูุฑูุนุงุช ู
ุนููู
ุงุช ุงูุฌูุงุฒ ุงูููููู ุงูู
ุฐููุฑุฉ ูู ูุฐูู ุงูู
ูุฒู
ุฉ
ูุงุฎูุฑุงู ูุฐูู ุงูู
ูุฒู
ุฉ ุญูุงูู ุนูููู
ูุฅุชู
ูู ู
ููู
ุฅู ุชุฏุนููู ุจุงูุฎูุฑ ูุงูุตุญุฉ ูุงูุนุงููุฉ ููุท
ูู ุงูุชูููู ุฒู
ูุงุฆู ูุฒู
ููุงุชู ุ ุฒู
ูููู
ู
ุญู
ุฏ ุงูุฐูุจู ๐๐
๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ๐ฅ
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the bodyโs response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(๐๐๐ ๐๐๐) (๐๐๐ฌ๐ฌ๐จ๐ง ๐)-๐๐ซ๐๐ฅ๐ข๐ฆ๐ฌ
๐๐ข๐ฌ๐๐ฎ๐ฌ๐ฌ ๐ญ๐ก๐ ๐๐๐ ๐๐ฎ๐ซ๐ซ๐ข๐๐ฎ๐ฅ๐ฎ๐ฆ ๐ข๐ง ๐ญ๐ก๐ ๐๐ก๐ข๐ฅ๐ข๐ฉ๐ฉ๐ข๐ง๐๐ฌ:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
๐๐ฑ๐ฉ๐ฅ๐๐ข๐ง ๐ญ๐ก๐ ๐๐๐ญ๐ฎ๐ซ๐ ๐๐ง๐ ๐๐๐จ๐ฉ๐ ๐จ๐ ๐๐ง ๐๐ง๐ญ๐ซ๐๐ฉ๐ซ๐๐ง๐๐ฎ๐ซ:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Ivรกn Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Educational Technology in the Health Sciences
Plenary presentation at the NTTC Inter-university Workshop, 18 June 2024, Manila Prince Hotel.
Recently uploaded (20)
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
ย
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
ย
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District
ย
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
ย
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
ย
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
ย
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
ย
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
ย
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
ย
Smart distribution board with Wi-Fi
- 1. DEPARTMENT OF EEE SMART DISTRIBUTION BOARD WITH WI-FI Under the Guidance of Mr. S. Sridhar, Asst. Professor, EEED Presented By : 19C31A0231 โ J.Pranay 19C31A0253 โ T.Shruthi 19C31A0208 โ B.Pooja 19C31A0257 โ Y.Akhila 19C31A0251 โ S.Siddhartha
- 2. CONTENTS โข Abstract โข Aim of the project โข Circuit diagram โข Use of ESP8266 โข Use of PZEM-004T โข Application
- 3. ABSTRACT ๏ Every day, thousands of accidents occur around the world as a result of electrical problems or breakdowns. A quick response time will help to limit the number of fatalities and financial damages associated with these events. ๏ As a result, we propose a system that will identify or detect any electrical system defects and warn the user in real time. ๏ This project made up of hardware prototype and by using ESP8266 software and can be programmed just like an Arduino.
- 4. Objective ๏ This project presents a design and prototype implementation of new home automation system that uses Wi-Fi technology. ๏ The proposed system is scalable that one server can manage many hardware interface modules. ๏ This system supports a wide range of home automation devices like power management components, and security components.
- 6. USE OF ESP8266 BOARD ๏ The ESP8266 Wi-Fi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your Wi-Fi network. ๏ It is capable of either hosting an application or offloading all Wi-Fi networking functions from another n processor.
- 7. ๏ USE OF PZEM -004T ๏ This PZEM-004T Multi-function AC Power Monitor is very popular in electrical consumption measurement projects. ๏ It is capable of measuring four interrelated electrical variables as voltage, current, power, and energy. ๏ This tiny PZEM-004T circuit is great for measuring AC voltage, current, and power .
- 8. Representation Model โข The best thing about the smart distribution Board with wi-fi is it can be directly connected to Arduino with ESP8266 software. โข Connect the Smart Distribution Board to the ESP8266 Software. โข Connect with PZEM-004T with ESP8266 Board
- 9. Applications ๏ Used for design and prototype implementation of new home automation system that uses Wi-Fi technology as a network infrastructure