smart street light system

1. BATCH MEMBERS:
 MARI SELVAM M (953218105307)
 PETCHIMUTHU MANIKANDAN P (953218105311)
 VIVEK R (953218105318)
 RAMESHKUMAR M (953218105314)
 SANJAI S (953218105315)
 MOHAMED FAIZAL M (953218105702)


PROJECT GUIDE:Dr.
DR.N.KUMARASABAPATHY (EEE)
SMART STREET LIGHT CONTROL SYSTEM
UNIVERSITY VOC COLLEGE OF ENGINEERING
THOOTHUKUDI

2. ABSTRACT:
• The main aim of this project is energy saving and safety purpose.
• By using this system energy consumption is reduced.
• Camera and micro controller are the main components of the
project.
• By chasing vehicle details and any incident at any place to inform
control room using GSM modem
• Any street light fault occur inform to EB office.

3. INTRODUCTION:
• Street light controllers are smarter versions of the mechanical or electronic timers previously used for street light
ON-OFF operation. They come with energy conservation options like twilight saving, staggering or dimming. Also
many street light controllers come with an astronomical clock for a particular location or a Global Positioning
System (GPS) connection to give the best ON-OFF time and energy saving.
• Automatic Street Light Control System is a simple and powerful concept, which uses transistor as a switch to
switch ON and OFF the street light automatically. By using this system . It automatically switches ON lights
when the sunlight goes below the visible region of our eyes. It automatically switches OFF lights under
illumination by sunlight.
• A street light, lamppost, street lamp, light standard, or lamp standard is a raised source of light on the edge of a
road or walkway, which is turned on or lit at a certain time every night. Modern lamps may also have light-
sensitive photocells to turn them on at dusk, off at dawn, or activate automatically in dark weather. In older
lighting this function would have been performed with the aid of a solar dial. It is not uncommon for street lights
to be on poles which have wires strung between them, or mounted on utility poles.
• Automatic Streetlight needs no manual operation of switching ON and OFF. The system itself detects
whether there is need for light or not. When darkness rises to a certain value

4. OBJECTIVES:
• Smart street light system tries to find solution for the faster depletion of
energy resource due to inefficient usage and wastage of these resource
• Increasing electricity bill is something that can be witnessed by these
practice
• These project help to decrease the wastage of electricity by controlling
the working of street light system that attributes ta a good amount of
electriity billin our nations
• These project does not include methodes to incroporate usage of
renewable resources like solor energy

5. PROPOSED SYSTEM :
• A smart street light system incorporates a cluster of streetlight lamps that can
communicate with each other and provide lighting data to a local concentrator.
The concentrator manages and transmits the relevant data to a secure server that
captures the data and presents it in a web-browser dashboard.
• It consists of power-adjustable LED array, the brightness sensor, the motion
sensor, the communication device, such as ZigBee module, and the controller. It
turns on for several minutes under the conditions that a motion is detected in the
defined area by the sensors including its own sensor. Then, it sends the message to
other units
• As for communication devices, a power-saving short- distance device, such as
ZigBee, is appropriate for our system. As for the position information, each
controller has plural addresses, which correspond to the adjacent different
networks.

6. COMPONENTS USED:
 Camera
 PIR sensor
 Vibration sensor
 GSM modem
 Smoke sensor
 Micro controller

7. CAMERA:

8. SENSORS:
• PIR sensors allow you to sense motion, almost
always used to detect whether a human has moved in or out of
the sensors range.
• A vibration sensor is a device that measures the amount and
frequency of vibration in a given system, machine, or piece of
equipment. Those measurements can be used to detect
imbalances or other issues in the asset and predict future
breakdowns.

9. PIR SENSOR :

10. VIBRATION SENSOR:

11. THINGSPEAK:
• ThingSpeak is a cloud platform where the data can be
stored in real time and can be accessed anytime, anywhere
through mobile phones.
• It uses the power of PROTEUS SOFTWARE
• It uses a GSM modem.
• The GSM modem is connected to the internet and then it
has direct connection to the ThingSpeak cloud server.

12. THINGSPEAK:

13. RELAY:

14. BLOCK DIAGRAM:
WIRELESS CONNECTIVITY
MICRO
CONTROLLER
FLAME
RELAY
GSM
PIR
POWER SUPPLY
(SOLAR POWER)AY
VIBRATIONDEN
CAMERA
LIGHT

15. ADVANTAGES :
•
Since automatic street light systems feature no moving parts, they require less maintenance than
conventional street lights.
• The automatic solar street light system is a stand-alone arrangement & therefore requires no
external wiring or having to connect with the grid.
• There are lower chances of the automatic street light system overheating & risk of accidents is also
minimized.
• Cost of operating automatic solar street lights is far less when compared to the conventional street
lights.
• The automatic street light system is eco-friendly & hence helps in reducing the carbon footprint.
• Smart solar street lights can be put up in remote areas even in places that are not accessible to the
grid.

16. WORK SCHEDULE:
MONTHS & WEEKS TASKS
Feb 3rd week Literature survey
Feb 4th week Literature survey
Mar 1st week Preparing for presentation
Mar 2nd week Simulation
Mar 3rd week Simulation and testing

17. S.No TITLE AUTHOR’S NAME EXISTING SYSTEM PUBLISHED YEAR
1 Intelligent Energy Efficient Street Light
Controlling System based on IoT for Smart
City
M.Caroline Viola Stella
Mary
IEEE 2017
2 Energy Efficient Smart Street Lighting
System in Nagpur Smart City using
IoT-A Case Study
Ruchika Prasad IEEE 2019
3 SMART STREET LIGHT CONTROL
SYSTEM
G. PAVAN KUMAR, C.
RAJEEV KUMAR
IRJET 2019
4 SMART STREET LIGHT BASED ON
ARDUINO
VIPPU SHIVA KIRAN,
RANGANADHAN
NITYANAND SAI IJERT 2020
REFERENCES: