This state-of-the-art strategic pipelay and heavy lift vessel is ideally
suited to meeting the exacting requirements of today’s ultra-deep
and deepwater projects, in the world’s harshest environments.
Development and depillaring with continuous minerSafdar Ali
This document provides information about online test series, study materials and video lectures for various mining exams conducted in India. It also provides contact details for ordering mining books and for queries. The document discusses various continuous mining systems like longwall mining and room and pillar mining. It provides details about first workings, typical development layout, pillar extraction methods like split and fender mining and lift mining using breaker line supports. Equipment used in continuous miner panels like continuous miners, shuttle cars, feeder breakers and their specifications are also summarized.
1) The document describes a continuous miner used at the Kapildhara mine in India.
2) The continuous miner is a Komatsu Joy 12CM15 model that was commissioned in 2008 and uses a cutting drum with tungsten carbide picks to continuously extract coal from the working face.
3) It can extract coal at a high rate of up to 30 tonnes per minute and was being used to extract coal from a 1.5-4.8 meter thick seam at the Kapildhara mine.
Method of working of continuous miner in underground coalSafdar Ali
The document discusses the method of working of a continuous miner in underground coal mining. It describes how a continuous miner continuously extracts coal from the working face using a cutting drum and conveyor system. It then discusses the different types of continuous miners and their main components. The summary is:
The document discusses the use of continuous miners for underground coal extraction. It describes how continuous miners use a rotating cutting drum and conveyor system to continuously extract coal from the working face. Different types of continuous miners are discussed along with their main components like the cutting head, loading mechanism, and conveyor system. Problems encountered and solutions implemented at various mining panels are also summarized.
This document describes the components and operation of a continuous miner machine used for underground coal mining. It discusses the main parts of the continuous miner including the cutter head, gathering arms, conveyor system, traction system, dust collector, and electrical and hydraulic systems. It provides specifications for the JOY 12CM15 continuous miner, which has a cutter head diameter of 1.12m, cutting width of 3.3m, and maximum cutting height of 4.6m. The continuous miner uses its cutter head and gathering arms to extract coal, which is then transferred via the conveyor system for removal from the mining face.
This document provides specifications for several models of Hyster forklift trucks and container handlers. It includes information on their lifting capacities, dimensions, engine specifications, and optional equipment. The models range from 25,000 kg to 32,000 kg capacity and are suited for applications such as container handling, general warehousing, and heavy industry.
The Seven Polaris is a 137m long barge capable of deepwater pipelay and heavy lift activities with dynamic positioning. It can accommodate 262 people and has a 1,440 ton main crane and two work-class remotely operated vehicles to operate from the seabed to the surface. The barge is classified by Bureau Veritas and has a pipelay system that can install pipes from 6 to 60 inches in diameter.
The HYDX-2 is a portable drilling rig designed for geological exploration in remote areas. It is fully hydraulic and can drill holes up to 350 meters deep using BQ drill rods. The rig consists of a diesel power unit, hydraulic system, control panel, mast, winches and drill head. It is dismantled into parts that are lightweight for transportation to difficult access areas, then reassembled on site.
Development and depillaring with continuous minerSafdar Ali
This document provides information about online test series, study materials and video lectures for various mining exams conducted in India. It also provides contact details for ordering mining books and for queries. The document discusses various continuous mining systems like longwall mining and room and pillar mining. It provides details about first workings, typical development layout, pillar extraction methods like split and fender mining and lift mining using breaker line supports. Equipment used in continuous miner panels like continuous miners, shuttle cars, feeder breakers and their specifications are also summarized.
1) The document describes a continuous miner used at the Kapildhara mine in India.
2) The continuous miner is a Komatsu Joy 12CM15 model that was commissioned in 2008 and uses a cutting drum with tungsten carbide picks to continuously extract coal from the working face.
3) It can extract coal at a high rate of up to 30 tonnes per minute and was being used to extract coal from a 1.5-4.8 meter thick seam at the Kapildhara mine.
Method of working of continuous miner in underground coalSafdar Ali
The document discusses the method of working of a continuous miner in underground coal mining. It describes how a continuous miner continuously extracts coal from the working face using a cutting drum and conveyor system. It then discusses the different types of continuous miners and their main components. The summary is:
The document discusses the use of continuous miners for underground coal extraction. It describes how continuous miners use a rotating cutting drum and conveyor system to continuously extract coal from the working face. Different types of continuous miners are discussed along with their main components like the cutting head, loading mechanism, and conveyor system. Problems encountered and solutions implemented at various mining panels are also summarized.
This document describes the components and operation of a continuous miner machine used for underground coal mining. It discusses the main parts of the continuous miner including the cutter head, gathering arms, conveyor system, traction system, dust collector, and electrical and hydraulic systems. It provides specifications for the JOY 12CM15 continuous miner, which has a cutter head diameter of 1.12m, cutting width of 3.3m, and maximum cutting height of 4.6m. The continuous miner uses its cutter head and gathering arms to extract coal, which is then transferred via the conveyor system for removal from the mining face.
This document provides specifications for several models of Hyster forklift trucks and container handlers. It includes information on their lifting capacities, dimensions, engine specifications, and optional equipment. The models range from 25,000 kg to 32,000 kg capacity and are suited for applications such as container handling, general warehousing, and heavy industry.
The Seven Polaris is a 137m long barge capable of deepwater pipelay and heavy lift activities with dynamic positioning. It can accommodate 262 people and has a 1,440 ton main crane and two work-class remotely operated vehicles to operate from the seabed to the surface. The barge is classified by Bureau Veritas and has a pipelay system that can install pipes from 6 to 60 inches in diameter.
The HYDX-2 is a portable drilling rig designed for geological exploration in remote areas. It is fully hydraulic and can drill holes up to 350 meters deep using BQ drill rods. The rig consists of a diesel power unit, hydraulic system, control panel, mast, winches and drill head. It is dismantled into parts that are lightweight for transportation to difficult access areas, then reassembled on site.
The document discusses methods of underground coal mining using continuous miners. It describes how continuous miners are used in combination with shuttle cars to extract coal from underground seams through bord and pillar mining or pillar extraction methods. Bord and pillar mining involves driving headings into the coal seam to form pillars for extraction. Pillar extraction methods using continuous miners involve splitting or stripping pillars left from initial development. The document provides details on various pillar extraction techniques like pillar splitting, stripping, and split and fendering to remove remnant coal pillars. It notes the risks of roof falls and importance of experience when using these secondary extraction methods.
in-pit crushing and conveing system (IPCC)NileshSingh206
The document discusses in-pit crushing and conveying (IPCC) systems used in open pit mining. IPCC systems aim to reduce operational costs by minimizing haulage distances and increasing efficiencies. There are three main types of IPCC systems - fixed, semi-mobile, and fully mobile. Fixed systems are located ex-pit while semi-mobile and fully mobile systems are moved periodically as mining progresses to remain close to the active mining face. IPCC systems provide advantages like lower maintenance costs and reduced environmental impact compared to traditional truck haulage systems. However, they also have higher initial costs and less flexibility.
development of main headings and gate roads with the use of road heading and bolter miners has paramount importance for effective production from a Longwall mine
The document discusses highwall mining, which involves using an unmanned continuous miner to extract coal seams exposed on the face of a pit or quarry. Key points:
- Highwall mining uses a remote-controlled cutter module pushed into the seam by push beams to mine and transport coal without personnel underground.
- The Bucyrus Highwall Mining System allows versatile extraction from trench, open cast, and contour mines using a self-contained machine operated by 3-4 crew.
- It offers affordable and safe coal mining while producing 40,000-110,000 metric tons per month depending on seam height.
This document discusses continuous miners, an underground coal mining technology. Some key points:
1) Continuous miners use a mass production method and can be used for room and pillar and shortwall mining. Their use has increased production at some CIL mines in India to over 0.5 Mte annually.
2) Ideal conditions for continuous miners include seam thickness of 1.8-5m, gradients less than 1 in 8, and hard, dry floor conditions. Several CIL mines have been identified to introduce the technology.
3) The technology involves a continuous miner cutting coal which is loaded onto shuttle cars and transported to a feeder breaker. Roof bolting then occurs before the min
This document summarizes a seminar presentation on belt conveyors. It outlines the main elements of belt conveyors including belts, idlers, pulleys, drive units and supporting structures. It also discusses aspects of belt conveyor design such as capacity calculation, belt tension, selection of belts, pulleys, motors and idler spacing. The document concludes by explaining the working, advantages, disadvantages and maintenance of belt conveyor systems.
Friedrich Koepe invented the Koepe winder, or friction winder, in 1873 as an alternative to traditional winding drums. A Koepe winder replaces the winding drum with a large wheel or sheave that the cages are connected to by rope. The rope passes around approximately 200 degrees of the sheave, which provides friction to drive the rope instead of a drum. Koepe winders can be ground-mounted or tower-mounted. They are often used for hoisting heavy loads from deep shafts due to avoiding the large inertia of a winding drum. Power calculations consider static torque from unbalanced loads, dynamic torque from acceleration/deceleration, and torque to overcome friction between the rope and she
Dragline machine at dhudhichua project ,singrauliTauhid Mohammad
A dragline excavator is a piece of heavy equipment used in civil engineering and surface mining.
Draglines fall into two broad categories: those that are based on standard, lifting cranes, and the heavy units which have to be built on-site.
The document discusses key considerations for designing a shaft system for an underground mine. It addresses the interrelation of the shaft subsystem with other mine systems like ventilation, dewatering, and transport. The main elements of a shaft system include the headframe, winder house, shaft collar, fan drift, fittings and conveyances. Designing the shaft requires a multidisciplinary approach and consideration of functional requirements, geological conditions, operational parameters, and statutory regulations. Choice of the winding system, conveyance type, and winder location are important design decisions.
There are three types of in-pit crushing systems: stationary/permanent systems use large capacity crushers installed permanently near the pit floor to crush material transported from working faces by trucks; relocatable/movable systems use medium capacity crushers without extensive foundations that crush material transported from faces by trucks and discharge onto relocatable conveyors; mobile systems use fully mobile small capacity crushers located near faces that are fed directly by excavators and discharge onto shiftable face conveyors.
The secondary mining technology for extracting the remaining coal from the open pit mining methods.
Cited as:
Boeut, S., & Loawattanabandit, P. " Design of Auger Highwall Mining: A case study at Mae Tan Coal Mine, Thailand", in Proc. ASEAN++2016 Towards Geo-resources Education in ASEAN Economic Community, 2016, pp. 304-321.
The document provides information on various underground transport methods used in mines, including:
1) Rope haulage systems like direct rope haulage, main and tail rope haulage, and endless rope haulage.
2) Locomotive haulage using diesel, electric, or compressed air locomotives.
3) Conveyor systems like belt and chain conveyors.
4) Gravity or self-acting haulage which uses the weight of loaded carts to pull empty carts uphill.
This document discusses various types of heavy construction equipment used for excavation and earthmoving, including draglines, clamshell excavators, rippers, and ditchers. Draglines are some of the largest mobile machines and are used for tasks like road and port construction as well as strip mining. They use a large bucket suspended from a boom to excavate material. Clamshell excavators are suited for deep underground construction work. Rippers are claw-like attachments on bulldozers that break up hard surfaces like rocky soil. Ditchers are used for trench excavation when soils are dense.
This document discusses the semi-mechanization of coal mining in India using Side Discharge Loaders (SDLs) and Load Haul Dumpers (LHDs). It provides background on the introduction of mechanization in coal mining in India. SDLs and LHDs have become important tools for intermediate technology in coal mining. The document describes the operations, capacities, advantages and safety features of SDLs and LHDs. It also discusses best practices, operating problems and the code of practice for operators.
Astec Australia proudly distributes the Breaker Technology Inc (BTI) line of underground mobile equipment in Australia, New Zealand, Papua New Guinea and the Weatern Pacific.
A name synonymous with quality and dependability, BTI (formerly Teledyne Equipment) is one of the heavy hitters when it comes to rock breaking and mobile equipment. Their line of underground mobile equipment meets all existing Tier and DPM requirements. Please see the brief descriptions of their underground mobile equipment below - accompanied by downloadable PDF brochures.
BTI's rugged, economical and utilitarian service vehicles support mine maintenance, safety, and production functions. They are configured as stand alone service vehicles (Low Profile - LP Series) or as interchangeable cassette/carrier combinations (Multi Purpose Vehicle - MPV Series).
Shotcrete Transmix Vehicle
Mine Runner
TM Series Mobile Rockbreaker
ANFO Loader
QS Series Mobile Scaler
Crane Utility Vehicle
Fuel Transfer Vehicle
Fuel Lube Truck
Personnel Carrier Vehicle
Scissor Lift Vehicle
MPV Carrier Cassette Series
This document discusses high wall mining, which is a remotely operated mining method used to extract coal from thin seams in exposed faces of overburden and coal in surface mines. It involves driving parallel entries into the coal seam from the high wall face without roof support using a continuous miner machine equipped with a cutter head and push beams. The miner can penetrate nearly 300 meters into the coal seam. High wall mining provides an economical way to extract coal reserves locked up in the high wall and can be used when open pit mining limits have been reached or for thin seams where conventional mining is not viable. It has advantages of high coal recovery rates, safety due to lack of manned entry, and low establishment costs.
A short description of Highwall Mining and its performance and application. The details of the equipments and the mining procedure are mentioned. Hope it will help you guys!
In pit crushing and conveying in surface minesSafdar Ali
This document discusses in-pit crushing and conveying systems used in surface mines. It describes how stationary, movable, and mobile in-pit crushing systems work, with material excavated from the mine pit brought to large crushers by trucks and then transported via conveyor belts to processing plants or waste dumps. In-pit crushing and conveying systems allow for material transport via more energy efficient conveyor belts instead of diesel trucks, reducing transportation costs, especially for moving large volumes of material over long distances or heights.
Coiled Tubing Introduction and Basics.pdfsalem123gmaal
Coiled tubing was originally developed during World War 2 for underwater pipelines. It involves running and retrieving a continuous steel tubing string without connections. This allows operations on live wells while continuously pumping fluids. The document discusses the manufacturing and components of coiled tubing systems. It also summarizes various applications of coiled tubing including wellbore cleanout, circulation, tool conveyance, and completions. The key advantages are its mobility, ability to work on live wells without connections, and role in transporting tools in deviated/horizontal wells. Limitations include small diameters and limited reach in long horizontals.
EDRILL-1 is a self-erecting tender assist drilling rig combining a lightweight drilling equipment set (DES) with an upsized deep-draft barge. The DES can be handled in three lifts to reduce rig move times, while the large barge supports batch drilling and completions. EDRILL-1 is well-suited for production drilling and completions in regions like Southeast Asia, Western Australia, West Africa, Gulf of Mexico or Brazil. It features a 400MT crane, 170-person accommodation, three 1,600HP mud pumps, and can operate in up to 250m water depths.
Saipem converted the vessel "Maxita" into a heavy lift vessel called "Saipem 3000" by replacing the stern section and installing a 2,400 tonne crane. The new 162 meter long vessel has a depth of 9 meters and can accommodate 211 people. It is a self-propelled, dynamically positioned monohull suited for worldwide offshore operations in severe environments.
The document discusses methods of underground coal mining using continuous miners. It describes how continuous miners are used in combination with shuttle cars to extract coal from underground seams through bord and pillar mining or pillar extraction methods. Bord and pillar mining involves driving headings into the coal seam to form pillars for extraction. Pillar extraction methods using continuous miners involve splitting or stripping pillars left from initial development. The document provides details on various pillar extraction techniques like pillar splitting, stripping, and split and fendering to remove remnant coal pillars. It notes the risks of roof falls and importance of experience when using these secondary extraction methods.
in-pit crushing and conveing system (IPCC)NileshSingh206
The document discusses in-pit crushing and conveying (IPCC) systems used in open pit mining. IPCC systems aim to reduce operational costs by minimizing haulage distances and increasing efficiencies. There are three main types of IPCC systems - fixed, semi-mobile, and fully mobile. Fixed systems are located ex-pit while semi-mobile and fully mobile systems are moved periodically as mining progresses to remain close to the active mining face. IPCC systems provide advantages like lower maintenance costs and reduced environmental impact compared to traditional truck haulage systems. However, they also have higher initial costs and less flexibility.
development of main headings and gate roads with the use of road heading and bolter miners has paramount importance for effective production from a Longwall mine
The document discusses highwall mining, which involves using an unmanned continuous miner to extract coal seams exposed on the face of a pit or quarry. Key points:
- Highwall mining uses a remote-controlled cutter module pushed into the seam by push beams to mine and transport coal without personnel underground.
- The Bucyrus Highwall Mining System allows versatile extraction from trench, open cast, and contour mines using a self-contained machine operated by 3-4 crew.
- It offers affordable and safe coal mining while producing 40,000-110,000 metric tons per month depending on seam height.
This document discusses continuous miners, an underground coal mining technology. Some key points:
1) Continuous miners use a mass production method and can be used for room and pillar and shortwall mining. Their use has increased production at some CIL mines in India to over 0.5 Mte annually.
2) Ideal conditions for continuous miners include seam thickness of 1.8-5m, gradients less than 1 in 8, and hard, dry floor conditions. Several CIL mines have been identified to introduce the technology.
3) The technology involves a continuous miner cutting coal which is loaded onto shuttle cars and transported to a feeder breaker. Roof bolting then occurs before the min
This document summarizes a seminar presentation on belt conveyors. It outlines the main elements of belt conveyors including belts, idlers, pulleys, drive units and supporting structures. It also discusses aspects of belt conveyor design such as capacity calculation, belt tension, selection of belts, pulleys, motors and idler spacing. The document concludes by explaining the working, advantages, disadvantages and maintenance of belt conveyor systems.
Friedrich Koepe invented the Koepe winder, or friction winder, in 1873 as an alternative to traditional winding drums. A Koepe winder replaces the winding drum with a large wheel or sheave that the cages are connected to by rope. The rope passes around approximately 200 degrees of the sheave, which provides friction to drive the rope instead of a drum. Koepe winders can be ground-mounted or tower-mounted. They are often used for hoisting heavy loads from deep shafts due to avoiding the large inertia of a winding drum. Power calculations consider static torque from unbalanced loads, dynamic torque from acceleration/deceleration, and torque to overcome friction between the rope and she
Dragline machine at dhudhichua project ,singrauliTauhid Mohammad
A dragline excavator is a piece of heavy equipment used in civil engineering and surface mining.
Draglines fall into two broad categories: those that are based on standard, lifting cranes, and the heavy units which have to be built on-site.
The document discusses key considerations for designing a shaft system for an underground mine. It addresses the interrelation of the shaft subsystem with other mine systems like ventilation, dewatering, and transport. The main elements of a shaft system include the headframe, winder house, shaft collar, fan drift, fittings and conveyances. Designing the shaft requires a multidisciplinary approach and consideration of functional requirements, geological conditions, operational parameters, and statutory regulations. Choice of the winding system, conveyance type, and winder location are important design decisions.
There are three types of in-pit crushing systems: stationary/permanent systems use large capacity crushers installed permanently near the pit floor to crush material transported from working faces by trucks; relocatable/movable systems use medium capacity crushers without extensive foundations that crush material transported from faces by trucks and discharge onto relocatable conveyors; mobile systems use fully mobile small capacity crushers located near faces that are fed directly by excavators and discharge onto shiftable face conveyors.
The secondary mining technology for extracting the remaining coal from the open pit mining methods.
Cited as:
Boeut, S., & Loawattanabandit, P. " Design of Auger Highwall Mining: A case study at Mae Tan Coal Mine, Thailand", in Proc. ASEAN++2016 Towards Geo-resources Education in ASEAN Economic Community, 2016, pp. 304-321.
The document provides information on various underground transport methods used in mines, including:
1) Rope haulage systems like direct rope haulage, main and tail rope haulage, and endless rope haulage.
2) Locomotive haulage using diesel, electric, or compressed air locomotives.
3) Conveyor systems like belt and chain conveyors.
4) Gravity or self-acting haulage which uses the weight of loaded carts to pull empty carts uphill.
This document discusses various types of heavy construction equipment used for excavation and earthmoving, including draglines, clamshell excavators, rippers, and ditchers. Draglines are some of the largest mobile machines and are used for tasks like road and port construction as well as strip mining. They use a large bucket suspended from a boom to excavate material. Clamshell excavators are suited for deep underground construction work. Rippers are claw-like attachments on bulldozers that break up hard surfaces like rocky soil. Ditchers are used for trench excavation when soils are dense.
This document discusses the semi-mechanization of coal mining in India using Side Discharge Loaders (SDLs) and Load Haul Dumpers (LHDs). It provides background on the introduction of mechanization in coal mining in India. SDLs and LHDs have become important tools for intermediate technology in coal mining. The document describes the operations, capacities, advantages and safety features of SDLs and LHDs. It also discusses best practices, operating problems and the code of practice for operators.
Astec Australia proudly distributes the Breaker Technology Inc (BTI) line of underground mobile equipment in Australia, New Zealand, Papua New Guinea and the Weatern Pacific.
A name synonymous with quality and dependability, BTI (formerly Teledyne Equipment) is one of the heavy hitters when it comes to rock breaking and mobile equipment. Their line of underground mobile equipment meets all existing Tier and DPM requirements. Please see the brief descriptions of their underground mobile equipment below - accompanied by downloadable PDF brochures.
BTI's rugged, economical and utilitarian service vehicles support mine maintenance, safety, and production functions. They are configured as stand alone service vehicles (Low Profile - LP Series) or as interchangeable cassette/carrier combinations (Multi Purpose Vehicle - MPV Series).
Shotcrete Transmix Vehicle
Mine Runner
TM Series Mobile Rockbreaker
ANFO Loader
QS Series Mobile Scaler
Crane Utility Vehicle
Fuel Transfer Vehicle
Fuel Lube Truck
Personnel Carrier Vehicle
Scissor Lift Vehicle
MPV Carrier Cassette Series
This document discusses high wall mining, which is a remotely operated mining method used to extract coal from thin seams in exposed faces of overburden and coal in surface mines. It involves driving parallel entries into the coal seam from the high wall face without roof support using a continuous miner machine equipped with a cutter head and push beams. The miner can penetrate nearly 300 meters into the coal seam. High wall mining provides an economical way to extract coal reserves locked up in the high wall and can be used when open pit mining limits have been reached or for thin seams where conventional mining is not viable. It has advantages of high coal recovery rates, safety due to lack of manned entry, and low establishment costs.
A short description of Highwall Mining and its performance and application. The details of the equipments and the mining procedure are mentioned. Hope it will help you guys!
In pit crushing and conveying in surface minesSafdar Ali
This document discusses in-pit crushing and conveying systems used in surface mines. It describes how stationary, movable, and mobile in-pit crushing systems work, with material excavated from the mine pit brought to large crushers by trucks and then transported via conveyor belts to processing plants or waste dumps. In-pit crushing and conveying systems allow for material transport via more energy efficient conveyor belts instead of diesel trucks, reducing transportation costs, especially for moving large volumes of material over long distances or heights.
Coiled Tubing Introduction and Basics.pdfsalem123gmaal
Coiled tubing was originally developed during World War 2 for underwater pipelines. It involves running and retrieving a continuous steel tubing string without connections. This allows operations on live wells while continuously pumping fluids. The document discusses the manufacturing and components of coiled tubing systems. It also summarizes various applications of coiled tubing including wellbore cleanout, circulation, tool conveyance, and completions. The key advantages are its mobility, ability to work on live wells without connections, and role in transporting tools in deviated/horizontal wells. Limitations include small diameters and limited reach in long horizontals.
EDRILL-1 is a self-erecting tender assist drilling rig combining a lightweight drilling equipment set (DES) with an upsized deep-draft barge. The DES can be handled in three lifts to reduce rig move times, while the large barge supports batch drilling and completions. EDRILL-1 is well-suited for production drilling and completions in regions like Southeast Asia, Western Australia, West Africa, Gulf of Mexico or Brazil. It features a 400MT crane, 170-person accommodation, three 1,600HP mud pumps, and can operate in up to 250m water depths.
Saipem converted the vessel "Maxita" into a heavy lift vessel called "Saipem 3000" by replacing the stern section and installing a 2,400 tonne crane. The new 162 meter long vessel has a depth of 9 meters and can accommodate 211 people. It is a self-propelled, dynamically positioned monohull suited for worldwide offshore operations in severe environments.
This document provides specifications for two offshore construction vessels, the Posh Endurance and Posh Endeavour. Some key details include:
- They were built in 2014 in Singapore and are 88 meters long with a beam of 20 meters.
- Each vessel has a cargo deck area of around 760 square meters and can carry up to 3,200 tons of cargo at a 6 meter draft.
- Propulsion is provided by azimuth propellers powered by electric motors, with generators run on marine diesel oil. Dynamic positioning is aided by GPS and laser systems.
- Accommodations include rooms for 90 passengers, offices, recreation areas, and segregated quarters for a crew of 38.
Normand Maximus is an innovative offshore construction vessel designed for ultra-deep water SURF installation and field development activities. Key features include a 2,500 square meter main deck, accommodations for 180 people, dynamic positioning systems for station keeping in sea states up to 5 meters, and versatile equipment like a 900 ton crane and vertical lay system for offshore construction and installation operations down to 4,000 meters water depth. The vessel is scheduled for delivery in mid-2016 and will provide unique operational capabilities for Saipem's offshore projects.
The Skandi Acergy is a 157m construction/flex-lay vessel capable of working in water depths up to 3,000m. It has a 2,100m2 clear deck area, a 400t heave compensated crane, 3,000t below deck storage carousel, and accommodation for 140 persons. The vessel is also equipped with 2 work-class ROVs to perform subsea operations down to 3,000m.
The Seven Oceans is a 157m pipelay vessel capable of installing rigid and flexible pipelines in water depths up to 3,000m. It has a 3,500 tonne capacity reel for storing up to 16-inch diameter pipelines and can lay them using a 400/450 tonne tensioner system. The vessel also has accommodation for 120 people and state-of-the-art dynamic positioning, ROV, and pipelay systems.
The Nordica is a multipurpose icebreaker vessel owned by Arctia Offshore. It has a length of 116 meters and was built in 1994. It is equipped for offshore installation tasks like pipe and cable laying using its 160 tonne crane. The Nordica has excellent icebreaking capabilities due to its two azimuth thrusters powered by 15MW of electricity. It is suited for operations in polar regions and can break ice up to 1.2 meters thick.
Archer's modular drilling rig (MDR) solution offers operational flexibility and cost efficiency unmatched in the modular offshore drilling rig market. The MDR package can be tailored for specific well requirements and provides an alternative to mobile offshore drilling units and traditional platform rigs. Archer currently owns and operates two MDR units, the Archer Emerald and Archer Topaz. The MDR utilizes an innovative modular design with a minimum crew of 16 and light module weights. Key features include a patented self-erecting mast system, 400 short ton pull capability, and efficient rig-up/down times.
The document describes the ZDY6000LD(B) directional drill rig produced by Xian Research Institute of China Coal Technology & Engineering Group. It has a compact tracked design that can drill boreholes over 1000 meters long in underground coal mines. Key features include a flameproof computer, dual feed cylinders, adjustable feed frame, and hydraulic mud pump system. Specifications include a 6000 Nm maximum torque, 1000mm feed stroke, and 260 L/min pump flow rate. The rig has been used successfully in directional drilling projects in Chinese coal mines, drilling over 8,000 meters in three months in one application.
This document provides a general description of a self-elevating drilling unit. It is a three-legged cantilever type jack-up rig designed for use in water depths up to 375 feet. It has a modified triangular hull that is 66 meters long and 64 meters wide. The rig contains a drilling floor, quarters for 130 crew members, a helideck, machinery including diesel engines and generators, mud systems, well control equipment, and auxiliary equipment for operations. Its intended area of operation is the Persian Gulf.
This document discusses opportunities to improve the efficiency and safety of deepwater drilling rigs and operations. It describes the key activities that rigs should be capable of, such as exploratory drilling, well testing, and subsea completions. Areas for improvement include reducing tubular handling times, improving tripping efficiency, and advancing well control systems. The document also discusses reducing failures through standardization, training, and system audits. Concurrent operations and reducing well times can lower costs. Storage capacities, logistics management, and power systems are also addressed.
The Normand Cutter is a 127.5 meter offshore construction vessel built in Norway. It has a large 1,600 square meter working deck area rated to carry 10 tons per square meter, making it suitable for various offshore and deepwater tasks including subsea construction. The vessel is equipped with three heavy work class remotely operated underwater vehicles certified for depths up to 3,000 meters and a 300 ton active heave compensated crane for lifting operations. Propulsion is provided through a diesel-electric system with multiple engines and generators.
The document summarizes Power Jacks' new U-Series of subsea screw jacks and bevel gearboxes. The U-Series products are designed to operate efficiently underwater at depths up to 3,000m as standard. The line includes subsea screw jacks in various configurations (rotating, translating) and bevel gearboxes. Both product types are proven to perform in demanding subsea conditions for applications like positioning equipment and actuating connectors.
The Deep Orient is a DP-2 class medium construction vessel ideal for subsea construction and flexible pipelay projects. It has significant lifting capability with a 250 ton main crane and large deck space for equipment storage. The vessel can work in deepwater locations and carry large payloads, and has roll reduction tanks to minimize motion and maximize workability.
The document provides specifications for the SAIPEM FDS, a field development ship owned by Saipem S.p.A. It is 163 meters long, 30 meters wide, can accommodate up to 245 people, and has a displacement of 26,600 tons. Its main capabilities include pipe laying for offshore oil and gas development down to 3,000 meters depth using a 600 ton main crane, a J-lay tower for laying pipes up to 22 inches in diameter, and dynamic positioning systems to maintain position. It also has equipment for storage and handling of pipes, chains, and flexible lines for offshore construction projects.
Tts Energy Company Presentation 3108 2011 Ver B Aug2011aarshipathan
TTS Energy AS , Norway is supplier of the High performance drilling equipment packages to the global oil & gas drilling contractors , Shipyards & owners etc
The Fugro Synergy is a new build drillship capable of multi-purpose drilling, geotechnical investigations, and subsea well services up to 3,000 meters. It has capabilities for subsea well construction including conductor/casing installation, well de-risking, and abandonment. The ship has a dynamic positioning system, 250 ton top drive, moonpool, skid system, and equipment for coring, sampling, and remote operated vehicles.
BOURBON offers a wide range of Marine and Subsea services for the most demanding clients: super majors, national companies, independents, contractors. Fully aligned on OCIMF standards, the Group relies on strong local partnerships, training and support to ensure the highest quality of service worldwide.
The Wellservicer is a 111-meter versatile multi-role vessel capable of heavy lifting, diving support, and subsea construction operations. It has excellent station keeping in rough seas, and features a 200-ton crane, two 5-ton knuckle boom cranes, an ROV system, saturation diving system for 18 divers, and dynamic positioning system. The vessel provides a stable platform for offshore construction and subsea installation work.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
artificial intelligence and data science contents.pptxGauravCar
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
An improved modulation technique suitable for a three level flying capacitor ...IJECEIAES
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...shadow0702a
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Rainfall intensity duration frequency curve statistical analysis and modeling...bijceesjournal
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Null Bangalore | Pentesters Approach to AWS IAMDivyanshu
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
1. This state-of-the-art strategic pipelay and heavy lift vessel is ideally
suited to meeting the exacting requirements of today’s ultra-deep
and deepwater projects, in the world’s harshest environments.
• Length 182m x breadth 46m
• 600t tension S-lay up to 46-inch pipe diameter
• 937t top tension J-lay system up to 24-inch pipe diameter
• 2,800t onboard pipe storage
• Mast crane: capacity main hoist 5,000t; 1,200t heave
compensated aux hoist
• Accommodation for 399 persons
• 2 x work-class 3,000 rated ROVs
seabed-to-surface
Seven
Borealis
Pipelay /
Heavy Lift