Natasha Azura Binti Lahman is the Site Safety Supervisor. Her responsibilities include ensuring compliance with health, safety, and environmental regulations and plans. This includes appointing qualified safety officers, conducting inspections, trainings, and assessments to identify and control hazards in order to prevent injuries on site. She oversees safety signage and barricades, documentation, and ensures all workers use proper personal protective equipment.
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
3. Control Measures: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Method statement & Risk assessment developed, approved & communicated? ☐ ☐ ☐
Availability of rescue procedure and equipment? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Workplace appropriately illuminated ☐ ☐ ☐
Any high risk activity associated that requires PTW (i.e. hot work, CSE)? ☐ ☐ ☐
Forced ventilation provided? ☐ ☐ ☐
Are all necessary Permit approved and displayed at work location? ☐ ☐ ☐
Means of communication available? (Mobile, radio etc.) ☐ ☐ ☐
Safe access / Working Platform provided? ☐ ☐ ☐
Mandatory/specific good condition PPEs are available ☐ ☐ ☐
Availability of barricades/protection to prevent unauthorized or accidental entry? ☐ ☐ ☐
Life Line provided? ☐ ☐ ☐
Warning signs posted? ☐ ☐ ☐
Fall Protection equipment (e.g. full body harness) available? ☐ ☐ ☐
Availability of Fall protection arrangement? ☐ ☐ ☐
Other(s): ☐ ☐ ☐
Adequate Lighting provided? ☐ ☐ ☐
☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
Brief description about the height work and brief description about hazards, equipment used for height work and best safety practices during performing a job in a site.
Table of Content
1. INTRODUCTION
1.1. PURPOSE
1.2. REVISIONS
1.3. DISTRIBUTION LIST
1.4. PROJECT DETAILS
1.5. PROJECT LOCATION
2. COMPLIANCE WITH LAWS AND REGULATIONS
3. DEFINITIONS & ABBREVIATION
3.1. DEFINITIONS
3.2. ABBREVIATION
4 ARABTEC HSEQ POLICIES & CERTIFICATES HSE POLICY STATEMENT
NO SMOKING POLICY
SAFE DRIVING POLICY
WASTE MANAGEMENT POLICY
WELFARE MANAGEMENT POLICIES
ISO CERTIFICATES
ABU DHABI EHSMS CERTIFICATE OF COMPLIANCE
5 PROJECT HSE OBJECTIVES
6 ORGANIZATION RESPONSIBILITIES AND ACCOUNTABILITIES
7 HSE COMMUNICATION ORIENTATION AND TRAINING
7.1.1 SITE RULES
7.1.2 GENERAL SITE RULES
7.1.3 PERSONAL SAFETY SITE RULES
7.1.4 SAFETY REFRESHER - TRAINING
2 Fire Risk Assessment Template Risk Assessment Templates
1. Site set up of temporary offices and cabins
Incl. Fire risk assessment;
2. Use of Portable gas heating or cutting equipment.
(all areas)
3. Electrical equipment (portable and fixed installation)
4. Smoking prevention, controls and arrangements within the Project
5. Hot Works activity controls
(Grinding, Welding, Cutting etc.)
6. Waste disposal: Combustible materials controlled and disposed of correctly.
(E.g. paper, cardboard plastics or wood.)
7. Storage of Flammable Gas within the project
(Acetylene, propane, butane, LPG etc.)
8. Flammable or highly flammable materials or substances on site and point of use.
(e.g. solvents, paints, adhesives, aerosols etc.)
9. Steps to reduce the potential sources of oxygen to a fire.
10. Any operations (or proposed) that may affect the Fire risk assessment
11. Clear access to electrical components and equipment.
12. Suspended ceilings within temporary buildings
(Offices, cabins etc.)
13. Alterations to structure and installations designed to prevent fire spread
14. Arson Prevention
(including security)
15. Smoke/heat detectors installed in high risk areas
16. Fire call points (break glass) installation.
17. Audible/visual fire alarms.
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
3. Control Measures: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Method statement & Risk assessment developed, approved & communicated? ☐ ☐ ☐
Availability of rescue procedure and equipment? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Workplace appropriately illuminated ☐ ☐ ☐
Any high risk activity associated that requires PTW (i.e. hot work, CSE)? ☐ ☐ ☐
Forced ventilation provided? ☐ ☐ ☐
Are all necessary Permit approved and displayed at work location? ☐ ☐ ☐
Means of communication available? (Mobile, radio etc.) ☐ ☐ ☐
Safe access / Working Platform provided? ☐ ☐ ☐
Mandatory/specific good condition PPEs are available ☐ ☐ ☐
Availability of barricades/protection to prevent unauthorized or accidental entry? ☐ ☐ ☐
Life Line provided? ☐ ☐ ☐
Warning signs posted? ☐ ☐ ☐
Fall Protection equipment (e.g. full body harness) available? ☐ ☐ ☐
Availability of Fall protection arrangement? ☐ ☐ ☐
Other(s): ☐ ☐ ☐
Adequate Lighting provided? ☐ ☐ ☐
☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
Brief description about the height work and brief description about hazards, equipment used for height work and best safety practices during performing a job in a site.
Table of Content
1. INTRODUCTION
1.1. PURPOSE
1.2. REVISIONS
1.3. DISTRIBUTION LIST
1.4. PROJECT DETAILS
1.5. PROJECT LOCATION
2. COMPLIANCE WITH LAWS AND REGULATIONS
3. DEFINITIONS & ABBREVIATION
3.1. DEFINITIONS
3.2. ABBREVIATION
4 ARABTEC HSEQ POLICIES & CERTIFICATES HSE POLICY STATEMENT
NO SMOKING POLICY
SAFE DRIVING POLICY
WASTE MANAGEMENT POLICY
WELFARE MANAGEMENT POLICIES
ISO CERTIFICATES
ABU DHABI EHSMS CERTIFICATE OF COMPLIANCE
5 PROJECT HSE OBJECTIVES
6 ORGANIZATION RESPONSIBILITIES AND ACCOUNTABILITIES
7 HSE COMMUNICATION ORIENTATION AND TRAINING
7.1.1 SITE RULES
7.1.2 GENERAL SITE RULES
7.1.3 PERSONAL SAFETY SITE RULES
7.1.4 SAFETY REFRESHER - TRAINING
2 Fire Risk Assessment Template Risk Assessment Templates
1. Site set up of temporary offices and cabins
Incl. Fire risk assessment;
2. Use of Portable gas heating or cutting equipment.
(all areas)
3. Electrical equipment (portable and fixed installation)
4. Smoking prevention, controls and arrangements within the Project
5. Hot Works activity controls
(Grinding, Welding, Cutting etc.)
6. Waste disposal: Combustible materials controlled and disposed of correctly.
(E.g. paper, cardboard plastics or wood.)
7. Storage of Flammable Gas within the project
(Acetylene, propane, butane, LPG etc.)
8. Flammable or highly flammable materials or substances on site and point of use.
(e.g. solvents, paints, adhesives, aerosols etc.)
9. Steps to reduce the potential sources of oxygen to a fire.
10. Any operations (or proposed) that may affect the Fire risk assessment
11. Clear access to electrical components and equipment.
12. Suspended ceilings within temporary buildings
(Offices, cabins etc.)
13. Alterations to structure and installations designed to prevent fire spread
14. Arson Prevention
(including security)
15. Smoke/heat detectors installed in high risk areas
16. Fire call points (break glass) installation.
17. Audible/visual fire alarms.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
2. Natasha Azura Binti Lahman
Site Safety Supervisor
It is the duty and responsibility of everyone at the site to ensure that the provisions made under the Statutory Regulations Health,
Safety and Environment (HSE) Management System are complied with.
1. Comply with HSE Management System and HSE Plan and Work Instructions.
2. To comply with all legal requirements with particular reference to:
• Occupational Safety and Health Act 1994 and its Regulations
• Factories and Machineries Act 1967 and its Regulations
• Environmental Quality Act 1974 and its Regulations
• Uniform Building By Laws 1984
• Local Government Act 1976
• Others related Acts, Regulations and Industrial Code of Practice
3. Take personal responsibility of the Statutory Laws and Regulations and undertake to indemnify Main Contractor and its HSE
Designate in respect of any liability, loss claims or proceedings.
4. All construction activities shall be carried out in a safe manner as to prevent injury to the worker and others.
5. All Contractors shall appoint a qualified Safety & Health Officer / Site Safety Supervisor as required below:
Description Appointment
1 – 20 workers Supervisor must be appointed and become the focal point in HSE matters.
20 – 100 workers
Site Safety Supervisor shall be appointed with relevant safety certificates / experience.
CV and copies of certificate must be produce to HSE Department.
More than 100 workers
Safety and Health Officer shall be appointed. CV and copies of certificate must be produce to
HSE Department.
Contract value more than
RM 20 Million
Registered Safety and Health Officer shall be appointed. CV and copies of certificate must be
produce to HSE Department.
3. 1. HIRARC / RISK ASSESSMENT / SAFE OPERATING PROCEDURE (SOP)
• Work activity to be identified the hazard, assess the risk and provide control measures & provide HIRARC.
2. SAFETY ORIENTATION
• Safety Induction for all entry (Mandatory)
• Green Card (Mandatory by CIDB)
• Valid Working Permit to Apply CIDB Green Card
3. PERSONAL PROTECTIVE EQUIPMENT (PPE – Safety Helmets, Safety Shoes, Goggles, Full Body Harness, etc.)
• Provided to all workers
• Mandatory to wear at site
• Safety and Health Officer / Site Safety Supervisor / Supervisor to ensure compliance
4. TOOL BOX TALK / SAFETY BRIEFING
• Daily – Conducted by Subcontractors & verified by Safety Dept (PTT by Operation).
• Weekly – Conducted by Subcontractors Safety and Health Officer / Site Safety Supervisor / Supervisor
• Monthly – Conducted by Safety Manager / Safety and Health Officer
5. MACHINERY / EQUIPMENT INSPECTION (Original copy must be verified by Safety Department before permit to site)
• Machineries with Certificate of Fitness (CF) from DOSH – PMA, PMT, File Transfer, etc. E.g.:- Mobile Cranes, Crawler Cranes,
• Piling Machine, Auger, Boring Machine, Air Compressor and Lorry Mounted Crane etc.
• Machineries without CF. E.g.:- Excavator, Backhoe, Welding Set, Gen Set, etc.
• Machineries more than 10 year need to do 3rd party Inspection.
Natasha Azura Binti Lahman
Site Safety Supervisor
4. 6. COMPETENT PERSON (Original copy must be verified by HSE Department before permit to site)
Machine Operator (Cranes, Piling Machine, Auger, Boring Machine, Excavator, etc.)
Electrical Charge men
Registered / Qualified Safety and Health Officer
Registered / Qualified Site Safety Supervisor
Registered / Qualified Scaffolder
Registered / Qualified Traffic Management Officer
7. SAFETY SIGNAGES / BARRICADE
“AWAS”, “DANGER”, “CAUTION”, etc.
Barricade work area, machines & equipment's, trenches, holes, etc.
8. SAFETY OBSERVATION
Unsafe Act (Everybody’s responsibilities)
Unsafe Condition (Supervisor to take immediate action or report to Safety and Health Officer)
9. MEETING
Daily – Progress meeting
Weekly – Among Safety and Health Officer & Subcontractor Safety Officer / Subcontractor person in charge of Safety
Monthly – HSE Committee meeting (as required by OSHA 94)
Ad Hoc – When needed or when necessary in case of accident, unsafe condition or any non compliance
10. SITE INSPECTION / AUDIT
Daily – Subcontractor Safety and Health Officer / Site Safety Supervisor and Supervisor Walkabout
Weekly – Safety and Health Officer
Monthly – By Management Team and Subcontractors
Quarterly – Safety Audit By Management Team & Subcontractors
Natasha Azura Binti Lahman
Site Safety Supervisor
5. 11. HOUSEKEEPING
To be conducted daily after complete work.
General Housekeeping every Saturday before start work
12. ENVIRONMENTAL
Spillage prevention – Skid tanks, Drum Barrels, Hydraulic Oils, etc.
Noise management – Machine Guarding, Ear Protection, etc.
Hazardous material handling and management – Chemical, Toxic, Poison, etc.
Waste management – Rubbish, Recycle Oil Waste, etc.
Emission & effluent discharges – Machinery maintenance, etc.
Others related environment issues
13. FORMS TO BE FILLED
a) Checklist Form
01. New Contractor Checklist 02. Air Compressor Checklist 03. Lifting Checklist
04. Excavation Checklist 05. Audit Checklist 06. Generator Set Checklist
07. Safe Driving Checklist 08. Moto Vehicle Checklist 09. Mosquito Control Checklist
10. Chemical Checklist 11. Electrical Safety Checklist 12. Fire Extinguisher Checklist
13. Grinding Machine Checklist 14. Mobile Ladders Checklist 15. Pressurised Hoses Checklist
16. First Aid Box Checklist 17. Office Safety Checklist 18. ARC Welding Inspection Checklist
19. Slip Trip and Fall 20. Working at Height
b) Admin Form
01. Accident Notification Form 02. Accident Report Form 03. Statement Form
04. Witness Declaration Form 05. Committee Members 06. Safety Induction Record
07. PPE Issue 08. Attendance Form 09. Safety Training Form
10. Notices Of Non-Compliance (NNC) 11. Notices Of Breach (NOB) 12. Notification Of Penalty (NOP)
Natasha Azura Binti Lahman
Site Safety Supervisor
6. THANK YOU
NATASHA AZURA LAHMAN
SITE SAFETY SUPERVISOR
Mobile : 017-495 4112
Email : natashazura.cccc@gmail.com