1. Srinivasa Rao - HSE 1 of 4
SRINIVASA RAO P
Mob No: 0557575639 / 0567791769
Email: srinu4u.68143@gmail.com
 HSE Professional with a Diploma in Fire & Safety Engineering and more than 20 years of experience in
Oil & Gas, Alumina Refineries and Power Plant construction projects in GCC and India.
 Worked for various projects associated with ARAMCO, JGC, PETRONAS, EGA Alumina projects -
Emirates Aluminium Smelter Plant 1&2 & Ras Al Khair Aluminum Smelter.
 NEBOSH, OSHAS & IOSH qualified.
QUALIFICATIONS
2007 : Diploma in Fire and Safety Engineering
India Institute of Entrepreneurship, India
2002 : Bachelor of Arts
Andhra University, India
CERTIFICATIONS
 NEBOSH International General Certificate Course.
 OSHAS 30 Hours General Industrial Safety course, Kingdom of Saudi Arabia
 IOSH Institution of Occupational Safety and Health Management Safety course.
WORK EXPERIENCE
Company : SCALLA Contracting LLC
Place : UAE
Position : HSE Officer
Period : October 2015 to Present
Project 1 : Soletanche Bachy – Piling Works – Entisar Towers, Dubai
Project 2 : Orient Contracting Company LLC (OCC) – Current Project
Company : M/S. Shapadu / Penta Global Engineering
Place : Malaysia
Position : HSE Supervisor
Period : January 2015 to June 2015
Project 1 : Petronas and JGC LNG TRAIN 9
Project 2 : Oil and Gas Construction and Installation Dynamic Project
Client : EMAL
Company : Scalla Contracting LLC
Place : UAE
Position : HSE Advisor
Period : November 2013 to March 2014
Project 1 : Emirates Aluminium Smelter Plant 1&2

2. Srinivasa Rao - HSE 2 of 4
Client : EMAL
Contractor : Alstom Norway
Company : Danem Oil Works LLC
Place : UAE
Position : HSE Sr. Officer
Period : February 2012 to October 2013
Project : EMAL EMIRATES Aluminum Phase 2
Company : Alesa Swezerland
Place : KSA
Position : HSE Sr. Officer
Period : March 2012 to December 2012
Project : Ras Al Khair Aluminum Smelter
Client : Cairn India Pvt. Ltd.
Company : Sakthi Hi Tech Pvt. Ltd.
Place : India
Position : HSE Officer
Period : April 2011 to January 2012
Project : Rava ON SHORE Terminal Piping Project
Company : AL-Yamama Company
Place : KSA
Position : HSE Officer
Period : July 2009 to March 2011
Project 1 : (KFABS) KING FAISAL AIR BASE FORCE, Operation and Maintenance
Project 2 : Borouge 2(Utility Offsite & External Interconnection), ARAMCO
Company : Andhra Petrochemicals Limited
Place : India
Position : Safety Supervisor
Period : May 1993 to June 2009
Project : Running Plant, Commissioning & Extension Plant
GENERAL RESPONSIBILITIES
 Delivered safety inductions training to the new workers and visitors to ensure safe working
conditions in the fabrication of Printed Circuit Boards.
 Monitors and undertake daily inspection tours in the area of responsibility to ensure
implementation of and here to the procedures set out in the HSE plan
 Maintain records on non-compliance reports and giving fines to violating workers
 Advise about prevention of injury to personnel and damage to plant and equipment as well as to
the environment.
 Maintain monthly targets and quotas in the production ensures that it comply with the
specifications and standard set by the clients.
 Site monitoring to ensure policy, procedures, regulation and good practice are complied.

3. Srinivasa Rao - HSE 3 of 4
 Health and safety site inspection and keep on advising operation to follow safe work system.
 Developed safety training to employees to enhance knowledge and competency.
 Maintained daily or regular safety talk to employees and supervisors.
 Conduct Safety Committee meeting and highlights significant issues.
 Carries out daily site surveys to ensure only safe work methods are in operation, adequate fire and
fall protection are in place, adequate welfare and first aid facilities are properly maintained,
approved tools are being used and sufficient Personal Protective Equipment provided and properly
worn.
 Conducting Tool Box Talks at least three times a week to remind the safety measures as per the
procedures.
 Implementation of Assembly Point in every stations in case of emergency.
 Compiles daily and monthly safety reports and directly report to the H.S.E manager
 Conducts quarterly inspection of all fire extinguishers and replace any defective ones.
 In charge in monitoring Personal Protective Equipment (PPE) to avoid any incident and accident in
stations as per the regulations & laws.
 Ensures all safety & environmental procedures are implemented in properly and safely.
 Accident & Incident at any stations will be reported as soon as possible to avoid any problems with
the UAE laws.
 To ensure that compliance of Health and Safety is maintained in accordance with International
regulation.
 Assists the safety manager in conducting safety training to all workers when required.
 Conduct safety induction to all new workers to ensure strict adherence to safety procedures in the
workplace.
 To conduct weekly toolbox meeting or as may be needed by workers to ensure maximum
observance of safe practices at the work place.
 To correct any unsafe working practices or procedures observed at the work place and make
constant follow-up in order to close out the non-compliance.
 Conducts regular inspection of work procedures and practices to ensure maximum adherence to
safety standards of concern government agencies without stoppage of work.
 Undertakes incident/accident investigation as maybe directed by the safety manager to identify
the reasons and make necessary corrective measure to ensure non-occurrence.
 Submits to the safety manager weekly, monthly safety statistics reports to monitor the safety
progress of the project.
 Reviews method statements of work activities to ensure safety of all workers is not compromised.
 Promotes safety through positive reinforcement at the workplace by using visual aids and guide
lines.
 Assists Project Safety Manager in conducting full investigation of accident / incident, including Near
Miss. Determines probable causes, develops, circulates and enforces appropriate permanent
preventive measures.
 Liaises with the Client Site Safety Representative and other plant concerned authorities or
contractors on work related safety requirements at site.
 Carries out daily site surveys to ensure: only safe work methods are in operation, adequate fire and
fall protection are in place, adequate welfare and first aid facilities are properly maintained,
approved tools are being used and sufficient Personal Protective Equipment provided and properly
worn.
 Closely monitors Scaffold erection / dismantling work, permit-required confined space entries,
Crane work / lifting operations/Hot work, equipment energization and similar hazardous activities
and. ensures that all relevant requirements are complied with.
 Checks and ensures compliance of site work-force with the approved Safe Work Permit System /
Procedure in the shipyards in accordance with regulation imposed.
 Participates at Corporate / Project-developed Safety Training / Incentive and Awareness.
 Programs; attends safety meetings with the client / other builders.
 Lock out / Tag out & POV training.

4. Srinivasa Rao - HSE 4 of 4
 Monitor and ensure all site activities are being complied with applicable Standards and Project
specifications. Coordinate with site supervisor and foremen to address and resolve all issues arise
in the system by prompt intervention.
 Conduct safety inspection and training programs
 Conduct safety awareness and motivation programs in the site area.  Conduct periodical risk
assessment and analysis of the hazardous activities.
 Attending to clear out points from Internal and External Audits.
 Checks the availability of proper PPE and Utilization in the site.
 Ensuring the PPE by monitoring and for volitions special counseling and warning notices.
 Welding Inspection of tool and equipment used in welding process, check for adequate Ventilation
or exhaust for extraction of fumes.
 Participating in progress and review meeting and updating the risk register to follow the job safely.
 Conduct regular Inspection to assess health and safety plan adherence as well as identify potential
loss and risk.
 Investigated industrial accident to minimize recurrence and prepared accident reports.
 Daily routine checks whether properly tested marked and color coded.
 Conducted necessary arrangement for confined space entries and hot work permits.
 Lock out / Tag out & POV training.
 Conducted scaffolding inspection prior to start working on newly erected scaffolds.
 Schedule surveillance testing and performance evolutions of the protection equipment.
 Services as on advisor to supervisor on fire protection and preventions issues.
 Develops systems and procedures to inspect test and maintain plant area or site fire protection
equipment and all Process maintained.
 Fire portable extinguishers tagged with current inspection.
 Fire extinguishers properly identified installed (correct places).
 Fire hydrants system check.
 Sprinkles system (wet and dry) lines check.
 Identifies conditions are situation that my hider firefighting operations and the safety of
emergency response personal and recommends remedies to correct the condition.
 Emergency Mock Drills Conducted, Emergency Evacuation controlling system responsibilities.
 Maintained good housekeeping.
 Proper use personal protective equipment (P.P.E).
 Conducts and Evaluates trainings and specialized fire protection equipment and procedures.
ROLES AND RESPONSIBILITIES (Fire & Safety):
 Schedule surveillance testing and Performance evolutions of the protection Equipment.
 Services as on advisor to supervisor on fire protection and preventions issues.
 Develops systems and procedures to inspect test and maintain plant area or site fire protection
equipment and all Proper maintained.
 Fire portable extinguishers tagged with current inspection.
 Fire extinguishers properly identified installed (correct places).
 Fire hydrants system Proper check daily Record Maintained.
 Sprinkles system and Deluge Valves Operation condition check (Wet and dry) lines check.
 Identifies conditions are situation that my hider firefighting operations and the safety of
emergency response personal and recommends remedies to correct the condition.
 Emergency Mock Drills Conducted Emergency Evacuation controlling system responsibilities.
 Maintained Plant/Construction good housekeeping.
 Proper use Personal Protective Equipment (P.P.E).
 Before use P.P.E proper check good Condition.
 Conducts and Evaluates trainings and specialized fire protection equipment and procedures.