Quicki branch joint - 25mm to 16mm
•
0 likes•17 views
The document summarizes the Filoform Quicki range of Gel Joints, which have been designed and tested to provide moisture protection for small conductors in outdoor, buried, and some submersible applications. The gel joints do not require specialist tooling, provide double sealing for moisture protection, and can withstand temperatures between -40°C to +140°C. They are suitable for jointing most cable types like XLPE, PVC, and EPR, and come with a connector block, cable ties, and mounting instructions.
Report
Share
Report
Share
Download to read offline
Recommended
Quicki gtq 1.5 - 2.5 gel joint
The Filoform Quicki range of Gel Joints are designed for use in outdoor, direct buried, and some submersible applications where moisture protection is critical. They are mainly used for unarmoured cables but can be used on some armoured cables with an armour continuity kit. The gel joints require no specialist tooling, have double seals for moisture protection, and have a high temperature resistant gel that works from -40°C to +140°C. They are suitable for jointing most cable types like XLPE, PVC, and EPR and include a gel filled shell, connector block, cable ties, and instructions.
Techsil OverTEC 5FR
OverTec is a low pressure overmoulding system that positions between high pressure short cycle time processes for mass production and gravity fed, long cycle time processes for short runs and prototypes. It is a very cost effective way to seal and protect electronic components. Popular applications include connector potting, overmoulding PCBs, making electric cable glands, providing strain relief on cables and protecting sensors.
Fiberglass vs PVC Trifold
Our premium fiberglass electrical boxes carry a variety of
unique features and benefits when compared to similar PVC
box products. Our tests below compare the two box products
and their ability to stand up to extreme temperatures. www.alliedmoulded.com
FiloSeal+HD FIRE
Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames, tested to BS EN1366-3 2009 / AS1530.4-2014 & LUL S1085 (London Underground)
Boehler dry+system en_2017
The new Böhler Welding Dry System provides oven dry stick electrodes that remain dry for up to 9 hours after opening the vacuum sealed packaging. The Dry System avoids the need for costly climate controlled storage and re-drying of electrodes. Electrodes can be stored in any dry location and guarantee low-hydrogen weld metal for 9 hours after opening, ensuring safe welding. The Dry System packaging is fully recyclable and provides documentation of opening time to verify electrodes remain dry.
5 Things about IP Classes in Rugged Embedded Computing
Far away from protected server rooms or automation lines in air-conditioned production halls, embedded computers need to withstand the toughest conditions in modern vehicles and moving machines, or in outdoor installations such as railway lines.
This presentation answers questions on how to develop sealed enclosures according to the required IP classes, which materials should be selected and in which applications these requirements are particularly important.
FiloSeal+HD datasheet
FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible sealant to provide a strong support structure for sealing cable configurations in ducts. The sealant, MD+, is a one-component, silicone-based sealant that is easily applied and cures with air. It adheres well to common building materials and provides high levels of gas and water tightness. The unique hexagonal tube design allows for simple positioning and separation of cables while providing backing for the sealant.
Filoseal+HD datasheet
FiloSeal+HD is a duct sealing system from Filoform UK that uses hexagonal tubes and a flexible silicone-based sealant to seal cable configurations and pipes within ducts. The sealant, MD+, is applied from a skeleton gun and cures with air to form a strong, gas and water tight seal around cables and pipes up to 110mm or 160mm in diameter, depending on the kit size. The unique hexagonal tube design allows for easy positioning and separation of cables while providing strong backing for the sealant.
Recommended
Quicki gtq 1.5 - 2.5 gel joint
The Filoform Quicki range of Gel Joints are designed for use in outdoor, direct buried, and some submersible applications where moisture protection is critical. They are mainly used for unarmoured cables but can be used on some armoured cables with an armour continuity kit. The gel joints require no specialist tooling, have double seals for moisture protection, and have a high temperature resistant gel that works from -40°C to +140°C. They are suitable for jointing most cable types like XLPE, PVC, and EPR and include a gel filled shell, connector block, cable ties, and instructions.
Techsil OverTEC 5FR
OverTec is a low pressure overmoulding system that positions between high pressure short cycle time processes for mass production and gravity fed, long cycle time processes for short runs and prototypes. It is a very cost effective way to seal and protect electronic components. Popular applications include connector potting, overmoulding PCBs, making electric cable glands, providing strain relief on cables and protecting sensors.
Fiberglass vs PVC Trifold
Our premium fiberglass electrical boxes carry a variety of
unique features and benefits when compared to similar PVC
box products. Our tests below compare the two box products
and their ability to stand up to extreme temperatures. www.alliedmoulded.com
FiloSeal+HD FIRE
Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames, tested to BS EN1366-3 2009 / AS1530.4-2014 & LUL S1085 (London Underground)
Boehler dry+system en_2017
The new Böhler Welding Dry System provides oven dry stick electrodes that remain dry for up to 9 hours after opening the vacuum sealed packaging. The Dry System avoids the need for costly climate controlled storage and re-drying of electrodes. Electrodes can be stored in any dry location and guarantee low-hydrogen weld metal for 9 hours after opening, ensuring safe welding. The Dry System packaging is fully recyclable and provides documentation of opening time to verify electrodes remain dry.
5 Things about IP Classes in Rugged Embedded Computing
Far away from protected server rooms or automation lines in air-conditioned production halls, embedded computers need to withstand the toughest conditions in modern vehicles and moving machines, or in outdoor installations such as railway lines.
This presentation answers questions on how to develop sealed enclosures according to the required IP classes, which materials should be selected and in which applications these requirements are particularly important.
FiloSeal+HD datasheet
FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible sealant to provide a strong support structure for sealing cable configurations in ducts. The sealant, MD+, is a one-component, silicone-based sealant that is easily applied and cures with air. It adheres well to common building materials and provides high levels of gas and water tightness. The unique hexagonal tube design allows for simple positioning and separation of cables while providing backing for the sealant.
Filoseal+HD datasheet
FiloSeal+HD is a duct sealing system from Filoform UK that uses hexagonal tubes and a flexible silicone-based sealant to seal cable configurations and pipes within ducts. The sealant, MD+, is applied from a skeleton gun and cures with air to form a strong, gas and water tight seal around cables and pipes up to 110mm or 160mm in diameter, depending on the kit size. The unique hexagonal tube design allows for easy positioning and separation of cables while providing strong backing for the sealant.
LUL Compliant Optical Fibre 48 Way IP67 Splice Enclosures
This weatherproof enclosure provides secure splicing for up to 192 optical fibers. Made from durable 2mm stainless steel, it has IP67 waterproofing and is suited for harsh external applications. Individual trays each hold up to 12 fibers and the pivoting design allows for easy cable management and maintenance. Multiple cable entry points below allow uncomplicated routing of incoming cables.
RotationalMoulding_Conference_Workshop_Problem two
Lower melt index (MI) polyethylenes are preferred for rotomoulding large tanks because they have higher toughness. Higher toughness is important for tanks that experience substantial hydrostatic loads. Lower MI materials have higher viscosity when melted, making them more difficult to mould but improving properties like tensile strength, flexural strength, and impact strength. The increased entanglement of longer polymer chains in lower MI materials provides greater resistance to cracking and higher toughness overall.
Bulk flow woven container liners
These high performance container woven bulk liners have proprietary manufacturing that eliminates risks from broken seams or loose threads. They provide the highest humidity barrier among woven liners due to their thick lamination. The liners can optionally use 4 or 5 steel bars due to strong clips, potentially saving 1 bar. Installation is easy with elastic cords and hooks. A pull-up top steel bar guarantees full access to discharge ports. The liners are made from high quality, FDA compliant materials.
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.Corporate presentation
Headway Chemicals presents its range of fire protection and sealing products for the construction industry. It distributes products from NPT Italy, including one-part polyurethane sealants for joints in concrete and buildings. It also offers polyurethane foam, passive fire protection products, and intumescent fire stopping materials like sealants, mortars, coatings, and putty. Headway has a 20-year production history, fully equipped laboratories for product development and testing, and distributes globally through partnerships like the one with NPT Italy.
Aluminium boxes for the offshore industry - Offshore competencies en
We manufacture and finish or engineer all our core products and supply all services ourselves or by the means of contract manufacturing. We place a high value on innovation. Our company is managed as a value-based organization.
And to support this promise, we know we must attract talented people that can solve complex problems with the latest technologies and methodologies. We continually work on creating an environment and culture where these problem-solvers can thrive. From creative design to precision manufacturing, our people rise to the challenge of understanding and addressing the unique opportunities faced by each of our customers.
Last but not least, we would like to contribute to sustainable development with our recyclable alu boxes and aluminum cases in the industrial, commercial, public and private sectors.
Filobox JB2.5 & JB6
The document describes two cable joint products, the Filobox JB2.5 and JB6, which are compact joints for connecting plastic insulated cables. They are suited for underwater, underground, or wet applications requiring an IP68 seal. Each set includes cable boxes, resin, connectors, gloves, sandpaper, and instructions. The joints provide electrical protection and waterproofing through special cable entry membranes and unique fast-curing resin.
Buy Industrial Products on Atcomaart.com
Filament Tape
http://www.atcomaart.com/pd/66556848675170565548/packaging-tapes/filament-tape.aspx
Aluminium Tape
http://www.atcomaart.com/pd/56497056696866655370/packaging-tapes/aluminium-tape.aspx
Lamination Film
http://www.atcomaart.com/pd/68675751685455525570/packaging-tapes/lamination-film.aspx
Cotton Friction Tape
http://www.atcomaart.com/pd/53486765695752575052/electrical-tapes/cotton-friction-tape.aspx
Lamons_Purely_High_Temperature
Lamons manufactures high-quality gasketing components for extreme industrial applications. They produce spiral wound gaskets, soft gaskets, ring joints, and other sealing products. Their HTG product family uses flexible graphite protected by mica/phyllosilicate barriers to provide sealing at extreme temperatures up to 1500°F while maintaining torque and tightness through thermal cycling. The flexible graphite maintains its properties while protected from oxidation, making the HTG gaskets the most stable sealing solution for demanding high-temperature industrial applications.
Types of gasket materials
A wide range of gasket materials are used in the industry for various purposes and their composite will vary based on the content that is being transferred
RIW Cementjoint Datasheet
RIW Cementjoint is an advanced, elastomeric, highly tear resistant, breathable, waterproof composite tape.
Find out more here:
http://www.riw.co.uk/uploads/downloads/RIW_CEMENTJOINT.pdf
Cablofil EZ Path Fire Protection Seals for Fire Barrier Walls & Floors
Cablofil EZ Path Fire Protection Seals for Fire Barrier Walls & Floors Thorne & Derrick International
Cablofil EZ Path provides a complete a certified fire protection seal for cables and pipe entries or penetrations through fire rated walls and floors - Cablofil EZ Path maintains high performance wall and floor fire barrier.
Cablofil EZ Path offers fire protection (240 minutes) for fire rated floor and wall constructions in accordance with BS476 : Part 20 and European Standard EN1366-3.
Cablofil EZ Path - Intumescent Fire Barrier for Cables
Intumescent products expand with heat creating a fire barrier filling any gaps created as combustible through penetrations (ducts, service entries, floor and wall openings) burn away, which otherwise would leave an opening for the passage of toxic smoke, heated gasses and fire. Cablofil EZ Path provides airtight barriers for toxic smoke and gas ensuring personal safety during a fire. Where cables enter a fire barrer wall or floor Cablofil EZ Path firestop materials can be installed to restore an hourly fire-rating.
Two intumescent fire protection pads cushion and compress the cables top and bottom and prevent smoke propagation through the opening even if the intumescent material does not expand (Cold Smoke). Exposed to fire or high temperatures, the intumescent fire barrier responds to flames or heat by rapidly sealing the cable pathway, duct or service entry and preventing passage of flames and smoke. Cablofil EZ Path ensures maximum fire protection and resistance whether it is empty or full - therefore EZ Path provides excellent fire protection with every new or retrofit cable installation.
Built in Future Use - Cablofil EZ Path features a built-in firestopping system that automatically adjusts to the number of cables running through - cables can be added or changed without the need to remove and re-install fire stopping materials.
Cable Tray -cables present in cable tray can provide a source of fuel to propagate fire, release toxic smoke and gases. They create openings that can compromise the fire barrier allowing spread of fire, toxic smoke and superheated gases.Legacy Shield General Product Information
This document describes spill containment systems called Well-Shield and Site-Shield units. The units are made of durable, waterproof vinyl-coated polyester fabric and coated with polyurethane and rubber for strength and safety. Well-Shield units are comprised of connecting base units that form a berm when filled with water, and a skirt that secures around the well. They contain spills of up to 3.8 barrels and install in about 5 minutes with 1-2 people. Site-Shield units provide containment for work areas. The document provides contact information for more product details.
Protection of piles
The document discusses various techniques for protecting wood, steel, and concrete piles from corrosion, weathering, and other external factors that can reduce strength and lifespan. These techniques include applying protective tapes and outer covers to create barriers from water, oxygen, and UV radiation. Heavier duty systems also involve fiberglass jackets and epoxy grouting to reinforce and further protect piles. All the systems described aim to provide long-term, maintenance-free protection of substructure piles in marine and coastal environments.
Street Lighting Polypipe Cable Duct
Ridgiduct and Polyduct lighting are twin wall and single wall cable protection systems for street lighting and traffic signals. They are manufactured in orange polyethylene (PE) or high-density polyethylene (HDPE) and include bends, reducers, and junction boxes to complete the system. Ridgicoil lighting provides a smooth bore PE cable protection in 50m coils for ease of cable installation. Access boxes and pole boxes provide protection and access for cable joints and are made from robust PE. Covers for the boxes can be composite, galvanized steel, or ductile iron depending on the expected loads.
Boddingtons Electrical Cable Jointing Tools & Safety Eqpt
This document provides information on various electrical safety products manufactured and supplied by Boddingtons Electrical including: fully insulated hand tools; cable preparation tools; safety rubber matting; electrical safety gloves; safety rescue hooks; earthing equipment; shrouding and clamps; arc flash protection; cableguard; cable and hose ramps; cable protection; and stay wire markers. The document describes each product category and lists relevant safety certifications and applications.
LOW EMISSIONS SEALING SOLUTIONS
In Colorado, Governor John Hickenlooper, supported by three leading energy companies and the Environmental Defense Fund, proposed the nation’s first oil and gas regulations to control methane emissions, a potent greenhouse gas that is especially powerful over the near-term. Increasing the need for improved fluid sealing technologies.
Ash and Lacy SA Over Roofing Asbestos Roofs A4 4pp Hi
Over-roofing is presented as an environmentally friendly and cost-effective alternative to the removal and disposal of asbestos roofing. It involves installing a new roof over the existing asbestos roof, leaving the asbestos in place. This avoids the health risks of asbestos removal and the high costs associated with removal and hazardous waste disposal. Some benefits of over-roofing include minimizing disruption to building occupants, eliminating costly asbestos removal and disposal, reducing project timelines, improving worker safety, increasing energy efficiency when insulation is added, and preventing further environmental degradation from asbestos in landfills. The existing asbestos roof provides a work platform, while a specialized vacuum captures any dust or fibers created during the installation process.
High performance fibers
The document discusses glass wool, which is made from glass fibers arranged using a binder into a texture similar to wool. It describes the production process and advantages of glass wool, including its thermal conductivity, density, compressibility, fire safety, and price. The document then outlines various applications of glass wool for insulation, including cavity wall insulation, HVAC duct insulation, pipe insulation, roof insulation, soundproofing, and higher temperature applications. Specific glass wool products are described for different uses along with their advantages. Precautions for handling glass wool to avoid irritation are also mentioned.
Quicki straight & branch gel joint
The document discusses Gel Joints which are suitable for joining various cable types and provide excellent sealing and insulation. The Filoform Quicki range of Gel Joints has been designed to protect against moisture for small conductor applications. They are mainly used for unarmoured cables but can be used on some armoured cables with an armour continuity kit. The joints contain a gel-filled shell, connector block, cable ties and mounting instructions.
FiloSlim cable repair datasheet
This kit is designed to replace the traditional method of Heatshrink Wrap-Around Sleeves, offering a single product capable of repairing any cable up to and including 170mm overall diameter. A totally enclosed mixing and pouring system enables a safer installation, and negates the need for naked flames or heat sources. The use of the resin outer encapsulation provides a secure mechanical protection, and is resistant to hydrocarbons and salt-water. The outer tape wrap and nozzle assembly can be cleanly removed, leaving a smooth profile suitable for cable-tray and bunched applications.
Quicki cable repair joint
The document describes a new gel-filled cable repair joint system. It is quick and easy to install, reduces the risk of installation errors, and has an impact-resistant housing connected by a hinge. The gel ensures a good seal and insulation around the cable when the joint is closed. It has no special tooling requirements and is suitable for permanent repairs to damaged cable sheaths.
More Related Content
What's hot
LUL Compliant Optical Fibre 48 Way IP67 Splice Enclosures
This weatherproof enclosure provides secure splicing for up to 192 optical fibers. Made from durable 2mm stainless steel, it has IP67 waterproofing and is suited for harsh external applications. Individual trays each hold up to 12 fibers and the pivoting design allows for easy cable management and maintenance. Multiple cable entry points below allow uncomplicated routing of incoming cables.
RotationalMoulding_Conference_Workshop_Problem two
Lower melt index (MI) polyethylenes are preferred for rotomoulding large tanks because they have higher toughness. Higher toughness is important for tanks that experience substantial hydrostatic loads. Lower MI materials have higher viscosity when melted, making them more difficult to mould but improving properties like tensile strength, flexural strength, and impact strength. The increased entanglement of longer polymer chains in lower MI materials provides greater resistance to cracking and higher toughness overall.
Bulk flow woven container liners
These high performance container woven bulk liners have proprietary manufacturing that eliminates risks from broken seams or loose threads. They provide the highest humidity barrier among woven liners due to their thick lamination. The liners can optionally use 4 or 5 steel bars due to strong clips, potentially saving 1 bar. Installation is easy with elastic cords and hooks. A pull-up top steel bar guarantees full access to discharge ports. The liners are made from high quality, FDA compliant materials.
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.Corporate presentation
Headway Chemicals presents its range of fire protection and sealing products for the construction industry. It distributes products from NPT Italy, including one-part polyurethane sealants for joints in concrete and buildings. It also offers polyurethane foam, passive fire protection products, and intumescent fire stopping materials like sealants, mortars, coatings, and putty. Headway has a 20-year production history, fully equipped laboratories for product development and testing, and distributes globally through partnerships like the one with NPT Italy.
Aluminium boxes for the offshore industry - Offshore competencies en
We manufacture and finish or engineer all our core products and supply all services ourselves or by the means of contract manufacturing. We place a high value on innovation. Our company is managed as a value-based organization.
And to support this promise, we know we must attract talented people that can solve complex problems with the latest technologies and methodologies. We continually work on creating an environment and culture where these problem-solvers can thrive. From creative design to precision manufacturing, our people rise to the challenge of understanding and addressing the unique opportunities faced by each of our customers.
Last but not least, we would like to contribute to sustainable development with our recyclable alu boxes and aluminum cases in the industrial, commercial, public and private sectors.
Filobox JB2.5 & JB6
The document describes two cable joint products, the Filobox JB2.5 and JB6, which are compact joints for connecting plastic insulated cables. They are suited for underwater, underground, or wet applications requiring an IP68 seal. Each set includes cable boxes, resin, connectors, gloves, sandpaper, and instructions. The joints provide electrical protection and waterproofing through special cable entry membranes and unique fast-curing resin.
Buy Industrial Products on Atcomaart.com
Filament Tape
http://www.atcomaart.com/pd/66556848675170565548/packaging-tapes/filament-tape.aspx
Aluminium Tape
http://www.atcomaart.com/pd/56497056696866655370/packaging-tapes/aluminium-tape.aspx
Lamination Film
http://www.atcomaart.com/pd/68675751685455525570/packaging-tapes/lamination-film.aspx
Cotton Friction Tape
http://www.atcomaart.com/pd/53486765695752575052/electrical-tapes/cotton-friction-tape.aspx
Lamons_Purely_High_Temperature
Lamons manufactures high-quality gasketing components for extreme industrial applications. They produce spiral wound gaskets, soft gaskets, ring joints, and other sealing products. Their HTG product family uses flexible graphite protected by mica/phyllosilicate barriers to provide sealing at extreme temperatures up to 1500°F while maintaining torque and tightness through thermal cycling. The flexible graphite maintains its properties while protected from oxidation, making the HTG gaskets the most stable sealing solution for demanding high-temperature industrial applications.
Types of gasket materials
A wide range of gasket materials are used in the industry for various purposes and their composite will vary based on the content that is being transferred
RIW Cementjoint Datasheet
RIW Cementjoint is an advanced, elastomeric, highly tear resistant, breathable, waterproof composite tape.
Find out more here:
http://www.riw.co.uk/uploads/downloads/RIW_CEMENTJOINT.pdf
Cablofil EZ Path Fire Protection Seals for Fire Barrier Walls & Floors
Cablofil EZ Path Fire Protection Seals for Fire Barrier Walls & Floors Thorne & Derrick International
Cablofil EZ Path provides a complete a certified fire protection seal for cables and pipe entries or penetrations through fire rated walls and floors - Cablofil EZ Path maintains high performance wall and floor fire barrier.
Cablofil EZ Path offers fire protection (240 minutes) for fire rated floor and wall constructions in accordance with BS476 : Part 20 and European Standard EN1366-3.
Cablofil EZ Path - Intumescent Fire Barrier for Cables
Intumescent products expand with heat creating a fire barrier filling any gaps created as combustible through penetrations (ducts, service entries, floor and wall openings) burn away, which otherwise would leave an opening for the passage of toxic smoke, heated gasses and fire. Cablofil EZ Path provides airtight barriers for toxic smoke and gas ensuring personal safety during a fire. Where cables enter a fire barrer wall or floor Cablofil EZ Path firestop materials can be installed to restore an hourly fire-rating.
Two intumescent fire protection pads cushion and compress the cables top and bottom and prevent smoke propagation through the opening even if the intumescent material does not expand (Cold Smoke). Exposed to fire or high temperatures, the intumescent fire barrier responds to flames or heat by rapidly sealing the cable pathway, duct or service entry and preventing passage of flames and smoke. Cablofil EZ Path ensures maximum fire protection and resistance whether it is empty or full - therefore EZ Path provides excellent fire protection with every new or retrofit cable installation.
Built in Future Use - Cablofil EZ Path features a built-in firestopping system that automatically adjusts to the number of cables running through - cables can be added or changed without the need to remove and re-install fire stopping materials.
Cable Tray -cables present in cable tray can provide a source of fuel to propagate fire, release toxic smoke and gases. They create openings that can compromise the fire barrier allowing spread of fire, toxic smoke and superheated gases.Legacy Shield General Product Information
This document describes spill containment systems called Well-Shield and Site-Shield units. The units are made of durable, waterproof vinyl-coated polyester fabric and coated with polyurethane and rubber for strength and safety. Well-Shield units are comprised of connecting base units that form a berm when filled with water, and a skirt that secures around the well. They contain spills of up to 3.8 barrels and install in about 5 minutes with 1-2 people. Site-Shield units provide containment for work areas. The document provides contact information for more product details.
Protection of piles
The document discusses various techniques for protecting wood, steel, and concrete piles from corrosion, weathering, and other external factors that can reduce strength and lifespan. These techniques include applying protective tapes and outer covers to create barriers from water, oxygen, and UV radiation. Heavier duty systems also involve fiberglass jackets and epoxy grouting to reinforce and further protect piles. All the systems described aim to provide long-term, maintenance-free protection of substructure piles in marine and coastal environments.
Street Lighting Polypipe Cable Duct
Ridgiduct and Polyduct lighting are twin wall and single wall cable protection systems for street lighting and traffic signals. They are manufactured in orange polyethylene (PE) or high-density polyethylene (HDPE) and include bends, reducers, and junction boxes to complete the system. Ridgicoil lighting provides a smooth bore PE cable protection in 50m coils for ease of cable installation. Access boxes and pole boxes provide protection and access for cable joints and are made from robust PE. Covers for the boxes can be composite, galvanized steel, or ductile iron depending on the expected loads.
Boddingtons Electrical Cable Jointing Tools & Safety Eqpt
This document provides information on various electrical safety products manufactured and supplied by Boddingtons Electrical including: fully insulated hand tools; cable preparation tools; safety rubber matting; electrical safety gloves; safety rescue hooks; earthing equipment; shrouding and clamps; arc flash protection; cableguard; cable and hose ramps; cable protection; and stay wire markers. The document describes each product category and lists relevant safety certifications and applications.
LOW EMISSIONS SEALING SOLUTIONS
In Colorado, Governor John Hickenlooper, supported by three leading energy companies and the Environmental Defense Fund, proposed the nation’s first oil and gas regulations to control methane emissions, a potent greenhouse gas that is especially powerful over the near-term. Increasing the need for improved fluid sealing technologies.
Ash and Lacy SA Over Roofing Asbestos Roofs A4 4pp Hi
Over-roofing is presented as an environmentally friendly and cost-effective alternative to the removal and disposal of asbestos roofing. It involves installing a new roof over the existing asbestos roof, leaving the asbestos in place. This avoids the health risks of asbestos removal and the high costs associated with removal and hazardous waste disposal. Some benefits of over-roofing include minimizing disruption to building occupants, eliminating costly asbestos removal and disposal, reducing project timelines, improving worker safety, increasing energy efficiency when insulation is added, and preventing further environmental degradation from asbestos in landfills. The existing asbestos roof provides a work platform, while a specialized vacuum captures any dust or fibers created during the installation process.
High performance fibers
The document discusses glass wool, which is made from glass fibers arranged using a binder into a texture similar to wool. It describes the production process and advantages of glass wool, including its thermal conductivity, density, compressibility, fire safety, and price. The document then outlines various applications of glass wool for insulation, including cavity wall insulation, HVAC duct insulation, pipe insulation, roof insulation, soundproofing, and higher temperature applications. Specific glass wool products are described for different uses along with their advantages. Precautions for handling glass wool to avoid irritation are also mentioned.
What's hot (19)
LUL Compliant Optical Fibre 48 Way IP67 Splice Enclosures
LUL Compliant Optical Fibre 48 Way IP67 Splice Enclosures
RotationalMoulding_Conference_Workshop_Problem two
RotationalMoulding_Conference_Workshop_Problem two
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Aluminium boxes for the offshore industry - Offshore competencies en
Aluminium boxes for the offshore industry - Offshore competencies en
Cablofil EZ Path Fire Protection Seals for Fire Barrier Walls & Floors
Cablofil EZ Path Fire Protection Seals for Fire Barrier Walls & Floors
Boddingtons Electrical Cable Jointing Tools & Safety Eqpt
Boddingtons Electrical Cable Jointing Tools & Safety Eqpt
Ash and Lacy SA Over Roofing Asbestos Roofs A4 4pp Hi
Ash and Lacy SA Over Roofing Asbestos Roofs A4 4pp Hi
Similar to Quicki branch joint - 25mm to 16mm
Quicki straight & branch gel joint
The document discusses Gel Joints which are suitable for joining various cable types and provide excellent sealing and insulation. The Filoform Quicki range of Gel Joints has been designed to protect against moisture for small conductor applications. They are mainly used for unarmoured cables but can be used on some armoured cables with an armour continuity kit. The joints contain a gel-filled shell, connector block, cable ties and mounting instructions.
FiloSlim cable repair datasheet
This kit is designed to replace the traditional method of Heatshrink Wrap-Around Sleeves, offering a single product capable of repairing any cable up to and including 170mm overall diameter. A totally enclosed mixing and pouring system enables a safer installation, and negates the need for naked flames or heat sources. The use of the resin outer encapsulation provides a secure mechanical protection, and is resistant to hydrocarbons and salt-water. The outer tape wrap and nozzle assembly can be cleanly removed, leaving a smooth profile suitable for cable-tray and bunched applications.
Quicki cable repair joint
The document describes a new gel-filled cable repair joint system. It is quick and easy to install, reduces the risk of installation errors, and has an impact-resistant housing connected by a hinge. The gel ensures a good seal and insulation around the cable when the joint is closed. It has no special tooling requirements and is suitable for permanent repairs to damaged cable sheaths.
1 Kalb Heatblocker Presentation For Catalog 051711
The document summarizes HeatBlocker, an exhaust insulation system. It describes HeatBlocker as designed for continuous heavy duty applications to protect personnel and equipment from high exhaust temperatures. It lists benefits like lower engine temperatures, reduced fires, and improved efficiency of emission control devices. The document provides details on HeatBlocker's custom design process, durable materials like Inconel alloy and ceramic fiber insulation, and superior performance compared to fiberglass insulation. It also shares HeatBlocker's partial customer list and warranty terms.
3M 2242 Scotch Tape Data Sheet
Scotch 2242 is an economical, linerless electrical tape made of ethylene propylene rubber. It is designed for insulating and sealing electrical connections for wires and cables rated up to 90°C. The tape has flame retardant properties and maintains its physical and electrical characteristics even when stretched. It can be used for splicing, terminating and insulating cable splices, moisture sealing connections, and other electrical applications. The data sheet provides details on the tape's black color, thickness, tensile strength, temperature and moisture resistance, as well as electrical properties like dielectric strength and dissipation factor.
2020 schlegel company overview with audio
This document provides an overview of Schlegel Electronic Materials (SEM), a manufacturer of EMI shielding and thermal management solutions. It discusses SEM's 120-year history, global locations, certifications, capabilities, product portfolio, R&D trends, manufacturing facilities, and top customers. SEM offers a full range of EMI shielding gaskets, absorbers, tapes, thermal interface materials, and custom shielding solutions. It focuses on innovative new products, a flexible business model, and outstanding customer service on a global scale.
Filoform Smart Gel Joint - LV Low Voltage Resin Branch Cable Joints
This document describes several types of cable joints for connecting low voltage cables. The Smart Joint is pre-filled and suitable for cables up to 15.7mm diameter, providing a quick and easy installation. The branch Smart Joint has four pre-installed connectors. The Gelbox and Filobox provide IP68 sealing for outdoor and underwater applications, with the Gelbox for cables up to 14mm and Filobox models for cables up to 20mm diameter. Dimensions and part numbers are provided for each product.
DN_5274_pdf.pdf
This document provides information on the XAL-53 hazardous location pull station. It can be used in areas with flammable gases, vapors, dusts or fibers. The pull station has a copper-free aluminum enclosure with conduit openings. It provides normally open and closed contacts and is activated by lifting the cover and pulling the ring. The pull station is suitable for Class I, II and III hazardous locations and requires occasional maintenance like lubrication and keeping surfaces clean. It is UL, ULC and CSA listed.
Filoform fibre optic flyer
This document provides information on Filoform, a company that specializes in sealing technology for underground cable networks. Filoform supplies a range of products and solutions for sealing, connecting, and protecting cable networks. They have over 55 years of experience developing expertise in manufacturing quality sealing products. Their product lines include divisible duct seals, connectors, entry seals, and other solutions for sealing cable and microduct networks during installation and maintenance.
Brochure intumescent air transfer grilles gb
This document provides information on various intumescent air transfer grilles produced by FSS International for fire protection applications. It describes several models of grilles, including the LVV40 basic compact grille (3 sentences), the LVH44 all-purpose grille suitable for various environments and orientations (3 sentences), and the LVH44-G fire resistant window ventilation grille developed for direct installation on fire resistant glass (3 sentences).
Deantape dt 657 1 mil polymide tape
Deantape DT-657 is a double coated 1 mil (25µm) die cut-able amber polyimide PI tape with a 1 mil (25µm) high-temperature flame-retardant (FR) pressure sensitive acrylic-based adhesive that incorporates FlameGard"' technology. The tape includes liners.
Outdoor Rack-Polemount or Wallmount
UNISOL Pole mount racks are designed for outdoor applications to meet IP65 applications. These racks are manufactured using superior grade raw material with the help of advanced technology in compliance with set international quality standards. These cabinets are sealed up-to IP65 to suit customers’ specific equipment, including fiber management, Additional essential features protect against the dangers of dust, humidity, rain, moisture, and physical attack.
These cabinets are available in Pole mount options with IP54, IP55, IP65 Range. These cabinets are sealed up-to IP55- IP65 to suit customers’ specific equipment, including fiber management, Additional essential features protect against the dangers of dust, humidity, rain, moisture, and physical attack.
Operational safety in power stations with molykote p37
MOLYKOTEP 37 is a high temperature thread paste developed by MOLYKOTE and SIEMENS for use in bolted connections in power stations. It was tested on various bolt materials up to 850°C and found to not seize or corrode bolts while maintaining the proper coefficient of friction. The paste is specially formulated to be free of metals like lead, tin, zinc, and nickel that could contaminate or react with bolted components. It contributes to operational safety by allowing easy dismantling of connections and avoiding fractures from improper lubricants.
Connection technology from ifm
The document discusses connection technology from ifm including M8 and M12 connectors. It describes features such as vibration protection from a saw-tooth contour design that prevents loosening from shocks and vibration. It also notes innovative sealing concepts that provide high protection ratings of IP67, IP68 and IP69K. A variety of product options are presented for different applications such as industrial environments, oils/coolants, hygienic areas, and hazardous locations.
Filoform Duct Sealing Brochure
Filoform is a specialist in sealing technology for underground cable networks. They provide a comprehensive range of sealing solutions, applications, and products to meet the general, specialist, and bespoke sealing requirements of cable, fiber optic, and utility networks. Their sealing solutions are characterized by their simplicity, universal application, and reliability. Filoform has over 55 years of experience developing expertise in manufacturing and supplying quality sealing products and solutions to connect, seal, and protect underground cable networks for international and domestic customers.
Fuse Socket
Fuse sockets are devices used to protect printed circuit boards (PCBs) from damage during fuse replacement by allowing easy removal and insertion of fuses. They consist of a brass or alloy shell, multi-finger contact clips, and an insulator body. Fuse sockets prevent heat damage to sensitive PCB components from soldering or desoldering during fuse replacement. They find applications where fuse replacement is common, such as in medical equipment, aerospace, consumer electronics, automotive, and military systems.
Filobox T40 with gel
The Filobox cable joint kit contains a non-hazardous silicone gel that cures to a soft, sticky seal around cable connections to provide durable protection. The kit includes a junction box with three cable glands that is suitable for outdoor, underground, or humid environments and connects cables with diameters between 9-17mm. The isocyanate-free gel has excellent adhesion and allows for easy, re-enterable sealing of cable joints.
Filoform branch cable joints
The Filoform range of cast resin Branch Joints are approved for use with armored and unarmored cables up to 1kv. The joints can be used with most cable types including PILC, XLPE, PVC and EPR. Standard Branch Joints can be upgraded to suit 3.3kv cables using a supplementary kit. The joints feature a hydrolysis resistant polyurethane resin in a transparent two-component bag and are fully waterproof with easy installation.
Fiber optics 2-1
The document discusses fiber optic cable types and selection criteria. It covers:
- Cable types including tight buffer, distribution, loose tube, and ribbon cables and their applications.
- Factors to consider when choosing cable like bandwidth needs, attenuation rate, length, cost, and environmental requirements.
- Specifications for fiber optic cables related to their installation and operating environment.
- Choosing the right fiber type depending on needs, including installing spare fibers and future-proofing with single-mode fibers.
Built-in Novel Insulation Monitoring Function for RIF Paperless Transformer B...
This seminar discusses novel insulation monitoring functions for resin impregnated fiberglass (RIF) paperless transformer bushings. It compares traditional oil, resin, and RIF bushings and highlights advantages of RIF bushings like mechanical strength and maintenance-free operation. New N-RIF bushings add built-in monitoring capabilities by using two capacitors - a main insulation capacitance and larger grading layer capacitance. Connecting monitoring terminals to the grading layer allows online monitoring of insulation conditions without impacting performance or requiring external power. This provides early detection of faults to prevent failures and allows scheduled maintenance.
Similar to Quicki branch joint - 25mm to 16mm (20)
1 Kalb Heatblocker Presentation For Catalog 051711
1 Kalb Heatblocker Presentation For Catalog 051711
Filoform Smart Gel Joint - LV Low Voltage Resin Branch Cable Joints
Filoform Smart Gel Joint - LV Low Voltage Resin Branch Cable Joints
Operational safety in power stations with molykote p37
Operational safety in power stations with molykote p37
Built-in Novel Insulation Monitoring Function for RIF Paperless Transformer B...
Built-in Novel Insulation Monitoring Function for RIF Paperless Transformer B...
More from Cable Glands UK Ltd
MAC Products Inc - Duct & Conduit Sealing Systems
This document provides information on various duct sealing systems from Filoform. It describes 4 different duct sealing systems - MDI, MDII, MDIII, and MDIV. Each system is designed for sealing ducts containing cables/pipes and comes in kits for different duct diameters. The kits contain molds and resin that expand to seal the ducts in a gas and water tight manner. The document also discusses FiloSeal+ and FiloSeal+HD universal re-enterable duct sealing systems, which allow adding/removing cables and provide strong backing for sealant. FiloSeal+HD FIRE provides a fire resistant version up to 4 hours.
FiloSeal+ Telstra Approved Duct Sealing System
FiloSeal+ has been tested an evaluated by Telstra and is suitable to for use on the Interconnect network in accordance with Telstra document ID TM00042A01
Jointing Tech - Duct Sealing Brochure
The document discusses different cable transit and duct sealing products from Jointingtech, including their MDIII, Filoseal+, and Filoseal+HD systems. The MDIII system seals against water and gas using expanding foam and resin. Filoseal+ is re-enterable and resistant to water, chemicals, and gases. Filoseal+HD has similar properties and provides up to 4 hours of fire resistance in transit frames and ducts. Product numbers, maximum duct and cable diameters, and other specifications are provided for each system.
FiloSeal+HD FIRE
Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames
Up to 4 hours fire resistance in transit frames (single side)
Up to 4 hours fire resistance in ducts
Tested to BS EN1366-3 2009
Up to 2 bar Pressure Resistance
100Kg pulling Force on the cables when sealed
10xd at 45º, with 1 bar pressure bending test
Filoform GQM gel - 22KV
Filoform GQM Gel is a two-part, solvent-free insulating compound for insulating and moisture sealing electrical equipment up to 22kv. It remains flexible and tacky once cured, and can be easily removed without heat. It has excellent adhesion to plastics and metals, and cures at low temperatures. The gel is non-hazardous, label-free, and can be used indoors, outdoors, underground, and underwater.
Filoform CPJ cable joint
The CPJ joint has been designed to connect cables in cathodic protection applications like pipelines and tanks. It can connect a main cable up to 70mm2 with branch cables up to 35mm2, but larger diameters can be accommodated. The joint has a strong plastic mould body with a snaplock connection and stepped cable entry points. It uses a high quality resin sealing compound that provides a reliable long-term connection without maintenance in all weather conditions.
Filoform straight cable joints
The Filoform range of cast resin Straight Joints are approved for use with armored and unarmored cables up to 1kv. The joints can be used on cable types including PILC, XLPE, PVC and EPR. Standard Straight Joints can be upgraded to 3.3kv with a supplementary kit. The joints feature hydrolysis resistant polyurethane resin in a transparent bag, strong transparent shells, and are fully waterproof.
MV heatshrink termination - single core
The document describes Filoform heatshrink medium voltage terminations for single core cables. The terminations are rated from 3.3-36kV and can be customized for various cable types including XLPE, PVC, and PILC cables. They are designed for use with compression or mechanical lugs and come in different standard tail lengths depending on the cable size and indoor or outdoor application. A range of supporting accessories are also available including cable entry seals, boots, and brackets.
MV heathrink termination - three core
Filoform manufactures medium voltage heatshrink terminations for three core cables rated up to 36kv. The terminations can be customized for indoor or outdoor use with various cable types. They are designed to work with compression or mechanical lugs and are available with tail lengths to meet customer needs. A range of accessories are also available to support the cable terminations.
MV heatshrink cable joint - three core
Filoform HJMVA Heatshrink Medium Voltage Straight Joints are manufactured from high quality materials and rated 3.3./36kv. They are suitable for joining most cable types and can be customized for armored or unarmored applications. The joints are designed for use with compression or mechanical connectors and can be adapted for export customers. They provide a simple design that is easy to install and offer protection with thick wall heatshrink tubing or a reinforced wrap-around sealing sleeve.
MV heatshrink cable joint - single core
Filoform manufactures medium voltage heatshrink cable joints rated for 3.3-36kV that are suitable for joining various cable types like XLPE, PVC, and PILC cables. The joints can be customized for armored or unarmored applications and used with compression or mechanical connectors. They have a simple design that is easy to install and feature thick heatshrink tubing or reinforced wrap-around sleeves for protection and strength. The joints are tested according to relevant standards.
FiloShrink Coldshrink Abandonment kits
The FiloShrink Cold Applied AK-series cable abandonment kits are designed for temporary or permanent abandonment of cables up to 3.3kv. They offer environmental and mechanical protection and do not require a heat source for installation. The kits are suitable for most common cable types like PVC, XLPE, PILC and EPR, and can be used for armored or unarmored, single or multi-core cables. The kits come in a range of sizes to accommodate cable diameters from 10mm to 83mm.
FiloShrink Coldshrink cable joints
The Filoshrink CJ-range provides cold shrink cable joints for joining XLPE, PVC, EPR cables rated 0.6 to 3.3kv. Manufactured from high quality EPDM, the joints offer excellent environmental sealing and resistance to chemicals. The Filoshrink CJ kits allow for inline joining of cables without the need for heat shrink or special tools. They accommodate cable sizes from 1.5mm2 to 300mm2 and can be used with mechanical or compression connectors.
FiloShrink Coldshrink End Caps
The Filoshrink range of cable end caps are made of EPDM rubber that is factory loaded onto a removable core. When positioned over a cable end, the core is removed allowing the cap to shrink onto the cable without heat or tools. Unlike heatshrink caps, the Filoshrink cap can be easily removed when needed. The EPDM material continues to tightly shrink over time, providing protection from moisture ingress. The caps accommodate a range of cable sizes and do not require adhesives, heat, or special training for installation.
FiloShrink Coldshrink tubes
The Filoshrink Cold Tubes are designed for a variety of applications and offer excellent mechanical, environmental, and sealing properties. They are constructed from high quality EPDM and available in different diameters and lengths for internal or external use. The flexible Filoshrink Tube is ideal for cable trays where space is limited or movement is expected after installation.
FiloFlex resin
Filoflex is a two-part polyurethane resin designed for repairing and encapsulating electrical cables and connections underwater or in portable applications. It has high adhesion, toughness, and electrical strength. Filoflex has an operating temperature range of -50 to +120°C and can withstand up to 130°C. It is also resistant to seawater, has low water absorption, and is RoHS compliant and non-toxic.
Gel - GQM - 22KV
Filoform GQM Gel is a two-part, solvent-free insulating compound for insulating and moisture sealing electrical equipment up to 22kv. It remains flexible and tacky once cured, and can be easily removed without heat. It has excellent adhesion to plastics and metals, and cures at low temperatures. The gel allows removal from equipment without heat and is not hazardous.
FiloGel
Filogel is a reusable insulating gel designed to protect electrical and electronic equipment from water, moisture, dust and shock. It can pot electronic components, is used in telecommunications to prevent moisture damage, and insulates low voltage connections. Filogel is non-toxic, removable, and resistant to water and corrosion with a long shelf life. It has medium viscosity, good adhesion and hydrophobic properties.
PC 5581 Polyurethane resin
Filofill PC5581 is a polyurethane resin designed for cable joints up to 3.3kV. It has good adhesion to metals, ceramics, and various plastics. It exhibits high resistance to UV, chemicals, earth alkalines, and hydrolysis. PC5581 meets testing standards in IEC 60455-3-8:2013 and has no halogens, plasticizers, or toxic emissions. It cures within 14 minutes and can operate between 0°C and +35°C.
Self amalgamating tape
The document discusses electrical insulation products from Filoform including self-amalgamating tape, cable joints, CET glands, and cable clamps. The Filoform Type 35 self-amalgamating tape is made of ethylene-propylene rubber rated for up to 69kv and is used as primary insulation on cable joints up to 3.3kv. Filoform's CET glands are for terminating and bonding SWA cables in confined spaces like street lighting. Cable clamps are proven solutions for efficiently laying and clamping one to three cables up to 175mm in diameter. Contact information is provided for CET glands and cable clamps.
More from Cable Glands UK Ltd (20)
Recently uploaded
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Recently uploaded (20)
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Quicki branch joint - 25mm to 16mm
- 1. 14 • The Filoform Quicki range of Gel Joints has been designed and tested in accordance with DIN EN 50393 Type 1 & 2, for use with small conductors in applications where moisture protection is critical. • The range has been developed for use in outdoor , direct buried and some submersible applications. They are mainly used for unarmoured cables; however, can be used on some armoured applications by adding a suitable armour continuity kit. (Contact our Sales Team for more details). Features • No specialist tooling required • Shells manufactured from high grade polymeric materials • Double seals for moisture protection • High temperature resistance gel -40˚C to +140˚C The range of Gel Joints are suitable for jointing most cable types – XLPE/PVC/EPR- and can be supplied with a connec- tor block as standard. Once the cores are connected, the shell is closed, allowing the special Gel to flow around the cable and connector block. This ensures excellent sealing and insulation properties. Set content: • Gel filled cable joint • Connector block with allen key • Cable ties • Mounting instruction Material scales halogen-free PP halogen-free PP Silicon Temperature range GEL -40°C / +140°C IP-Value IP 68 in accordance with EN 60529: 1989 + A1: 1999 Tested DIN EN 50393 Type 1 & Type 2 QUICKI branch off joint up to 25/16mm² GEL JOINTS Item number Description Cable diameter (mm) Dimensions (mm) 88000947UK QUICKI GTQA 25/16 branch-off joint Ø 18 - 33 275x120x47