The Filoform range of cast resin Branch Joints are approved for use with armored and unarmored cables up to 1kv. The joints can be used with most cable types including PILC, XLPE, PVC and EPR. Standard Branch Joints can be upgraded to suit 3.3kv cables using a supplementary kit. The joints feature a hydrolysis resistant polyurethane resin in a transparent two-component bag and are fully waterproof with easy installation.
Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames, tested to BS EN1366-3 2009 / AS1530.4-2014 & LUL S1085 (London Underground)
This kit is designed to replace the traditional method of Heatshrink Wrap-Around Sleeves, offering a single product capable of repairing any cable up to and including 170mm overall diameter. A totally enclosed mixing and pouring system enables a safer installation, and negates the need for naked flames or heat sources. The use of the resin outer encapsulation provides a secure mechanical protection, and is resistant to hydrocarbons and salt-water. The outer tape wrap and nozzle assembly can be cleanly removed, leaving a smooth profile suitable for cable-tray and bunched applications.
FiloSeal+HD is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses strong, but flexible hexagonal tubes to support the cable and provide a strong backing for the seal
Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames, tested to BS EN1366-3 2009 / AS1530.4-2014 & LUL S1085 (London Underground)
This kit is designed to replace the traditional method of Heatshrink Wrap-Around Sleeves, offering a single product capable of repairing any cable up to and including 170mm overall diameter. A totally enclosed mixing and pouring system enables a safer installation, and negates the need for naked flames or heat sources. The use of the resin outer encapsulation provides a secure mechanical protection, and is resistant to hydrocarbons and salt-water. The outer tape wrap and nozzle assembly can be cleanly removed, leaving a smooth profile suitable for cable-tray and bunched applications.
FiloSeal+HD is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses strong, but flexible hexagonal tubes to support the cable and provide a strong backing for the seal
For more details on our products and services, please feel free to visit us at military harness for dogs, Carabiner, Carry Belt, Competition Belt, rescue gear
Outdoor closure box is used to terminate the fiber cores. UNISOL Outdoor closure can supply IP rated Optical Fiber Splice Dome Enclosure and Inline Splice Enclosures.
Power shunts are large cross-sectional area copper braided connectors designed to meet the current carrying capacity of power distribution applications - designed with multi-layers of flat or round earth braids to achieve sizes up to 1000sqmm and carry currents in excess of 400 amps.
Power shunts are used as an alternative to solid bus bars and power cable assemblies capable of carrying very high currents yet are flexible, robust and easy to install.
Typical power shunt applications : power stations, transformers, motors, generators, switchgear, substations - low and high voltage.
Power Shunts - Large Earth Braid Connectors
T&D UK are established distributors of an extensive range of large braid connectors, also known as "Power Shunt" connectors with cross-sectional areas of up to 1000sqmm and current carrying capacities in excess of 1800amps - larger style earth braid power connectors are designed for heavy-duty power applications as flexible current carrying connectors requiring resistance to vibration. Robust, durable and flexible power shunt braided connectors are specified for power distribution in turbines, HV substations, power stations, distribution grids, electrified trains and rail systems as alternatives to solid bus bars.
Mica tube is made of mica paper with the appropriate adhesive in the single-sided reinforcement material, the rolling made of rigid tubular insulation material. It has a high mechanical strength, suitable for a variety of motors, electrical equipment in the electrode, rod or outlet sleeve insulation. The maximum density of STMAT mica tube is up to 2.0g / cm³, length 10mm-2000mm, diameter 4~300mm.
Under normal circumstances, we are in accordance with the positive tolerance for inner diameter and negative tolerance for outer diameter as principle during production. At the same time we can produce tubes according to customer requirements, some special tube can be controlled within 0.2mm.
Monel mesh- Highly durable material, preferred for fittingsHeanjia Alloys
Monel mesh is used in wire mesh gaskets providing a cost effective solution to high shielding performance applications in the magnetic and electrical fields including EMP.
For more details on our products and services, please feel free to visit us at military harness for dogs, Carabiner, Carry Belt, Competition Belt, rescue gear
Outdoor closure box is used to terminate the fiber cores. UNISOL Outdoor closure can supply IP rated Optical Fiber Splice Dome Enclosure and Inline Splice Enclosures.
Power shunts are large cross-sectional area copper braided connectors designed to meet the current carrying capacity of power distribution applications - designed with multi-layers of flat or round earth braids to achieve sizes up to 1000sqmm and carry currents in excess of 400 amps.
Power shunts are used as an alternative to solid bus bars and power cable assemblies capable of carrying very high currents yet are flexible, robust and easy to install.
Typical power shunt applications : power stations, transformers, motors, generators, switchgear, substations - low and high voltage.
Power Shunts - Large Earth Braid Connectors
T&D UK are established distributors of an extensive range of large braid connectors, also known as "Power Shunt" connectors with cross-sectional areas of up to 1000sqmm and current carrying capacities in excess of 1800amps - larger style earth braid power connectors are designed for heavy-duty power applications as flexible current carrying connectors requiring resistance to vibration. Robust, durable and flexible power shunt braided connectors are specified for power distribution in turbines, HV substations, power stations, distribution grids, electrified trains and rail systems as alternatives to solid bus bars.
Mica tube is made of mica paper with the appropriate adhesive in the single-sided reinforcement material, the rolling made of rigid tubular insulation material. It has a high mechanical strength, suitable for a variety of motors, electrical equipment in the electrode, rod or outlet sleeve insulation. The maximum density of STMAT mica tube is up to 2.0g / cm³, length 10mm-2000mm, diameter 4~300mm.
Under normal circumstances, we are in accordance with the positive tolerance for inner diameter and negative tolerance for outer diameter as principle during production. At the same time we can produce tubes according to customer requirements, some special tube can be controlled within 0.2mm.
Monel mesh- Highly durable material, preferred for fittingsHeanjia Alloys
Monel mesh is used in wire mesh gaskets providing a cost effective solution to high shielding performance applications in the magnetic and electrical fields including EMP.
During past years Nestor Cables has morphed from a traditional cable manufacturer into a modern solution provider - nowadays we aim to deliver whole packages to serve as a complete solutions to our customers’ needs. Our solutions have been developed with decades of experience in cable technologies and in close cooperation with our customers. In this brochure we introduce six solutions: Fibre to the Antenna, Fibre to the Home, Fibre Optic Cables in Windmill Farms, Mobile Optical Cable Units, Nestor Cables Security System N-Sec and Microduct cabling solution.
Shen Tai Electric Cable Co., Ltd. is a leading company in producing all kinds of wire and cable, our technology is state of the art, quality is in the highest level, designs are capable to meet customers’ needs worldwide.
A duct & conduit sealing brochure manufactured by Filoform and distributed by MAC Products Inc. in Kearny, New Jersey.
A properly designed and installed conduit and duct sealing system is essential for the safety and protection of the public and the protection and longevity of equipment. Hazards needing mitigation include:
Flammable and corrosive gases
Liquids including water and insulating fluids
Fire
FiloSeal+ has been tested an evaluated by Telstra and is suitable to for use on the Interconnect network in accordance with Telstra document ID TM00042A01
Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames
Up to 4 hours fire resistance in transit frames (single side)
Up to 4 hours fire resistance in ducts
Tested to BS EN1366-3 2009
Up to 2 bar Pressure Resistance
100Kg pulling Force on the cables when sealed
10xd at 45º, with 1 bar pressure bending test
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
1. 5
CABLE JOINTS
The Filoform range of cast resin Branch Joints are approved in
accordance with DIN EN 50393 (VDE 0278:393):2006-11, and are
suitable for use with both armoured and unarmoured cables up
to and including 1kv. The joints are suitable for use on most cable
types, including PILC, XLPE, PVC and EPR, and can be supplied
complete with armour earth kit and mechanical connectors as
standard.
The standard Branch Joints can be upgraded to suit 3.3kv by using
a separate supplementary kit.
Designed for UK armoured cables to allow plenty of room to work.
Features
• Type tested according to: EN 50393:2006-11
• Hydrolysis resistant polyurethane resin in a transparent 2 component bag
• Strong transparent shells
• Fully waterproof, no resin leakage
• Cable spacers included
• Complete kit, sealing tape, sandpaper, and protective gloves also included
• Installation instructions with clear drawings
• Quick and easy installation
• Connectors and earthing kits available on request
• Type tested according to: IEC 60455-3-8:2013
Branch Joints
Item number Description Cable Diameter (mm) Dimensions (mm)
MB6 MB6 Ø 10 - 22 220 x 76
MB16 MB16 Ø 10 - 30 282 x 100
MB35 MB35 Ø 15 - 30 360 x 100
MB35 MB35 Ø 15 - 30 360 x 100
MB70 MB70 Ø 15 - 40 390 x 120
MB120 MB120 Ø 15 - 50 570 x 160
MB300 MB300 Ø 45 - 75 740 x 250
Width
Length
Cableopening
