The CPJ joint has been designed to connect cables in cathodic protection applications like pipelines and tanks. It can connect a main cable up to 70mm2 with branch cables up to 35mm2, but larger diameters can be accommodated. The joint has a strong plastic mould body with a snaplock connection and stepped cable entry points. It uses a high quality resin sealing compound that provides a reliable long-term connection without maintenance in all weather conditions.
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
Cablofil EZ Path provides a complete a certified fire protection seal for cables and pipe entries or penetrations through fire rated walls and floors - Cablofil EZ Path maintains high performance wall and floor fire barrier.
Cablofil EZ Path offers fire protection (240 minutes) for fire rated floor and wall constructions in accordance with BS476 : Part 20 and European Standard EN1366-3.
Cablofil EZ Path - Intumescent Fire Barrier for Cables
Intumescent products expand with heat creating a fire barrier filling any gaps created as combustible through penetrations (ducts, service entries, floor and wall openings) burn away, which otherwise would leave an opening for the passage of toxic smoke, heated gasses and fire. Cablofil EZ Path provides airtight barriers for toxic smoke and gas ensuring personal safety during a fire. Where cables enter a fire barrer wall or floor Cablofil EZ Path firestop materials can be installed to restore an hourly fire-rating.
Two intumescent fire protection pads cushion and compress the cables top and bottom and prevent smoke propagation through the opening even if the intumescent material does not expand (Cold Smoke). Exposed to fire or high temperatures, the intumescent fire barrier responds to flames or heat by rapidly sealing the cable pathway, duct or service entry and preventing passage of flames and smoke. Cablofil EZ Path ensures maximum fire protection and resistance whether it is empty or full - therefore EZ Path provides excellent fire protection with every new or retrofit cable installation.
Built in Future Use - Cablofil EZ Path features a built-in firestopping system that automatically adjusts to the number of cables running through - cables can be added or changed without the need to remove and re-install fire stopping materials.
Cable Tray -cables present in cable tray can provide a source of fuel to propagate fire, release toxic smoke and gases. They create openings that can compromise the fire barrier allowing spread of fire, toxic smoke and superheated gases.
My-Pros installs a whole new roof system. most roofing contractors will just throw some shingles on the roof and call it good. When investing into a new roof can be expensive so why not make certain the new roof will last? Hire My-Pros www.myprosroofing.com
In sealing challenges when connecting fitting and glass doors we need to be careful to assure soft connection in order to protect and avoid damaging the connection. This has to be done without risking leaking connections.
Our answer is to use a TESNIT® product proving to supply a waterproof gasket.
It is not enough just to have a top-quality door hinge or fitting.
Especially heavy duty usage environment life calls for durability.
The TESNIT® product is composed of cellulose fibres, inorganic fillers and NBR binder.
As such, it has very good mechanical and sealing properties.
AKKO Refurbishment Services are pleased to introduce our extensive range of maintenance and refurbishment services to your practice / department.
Options Possibilities and Choices for Roof Upgarding or Replacement
With over a century of experience in the design, quality and installation of grain storage systems, Bentall Rowlands Storage Systems Limited is a leading UK manufacturer in complete storage and processing equipment for the agricultural and industrial markets.
Sustainability and environmental
responsibility influence every
aspect of our business. Through
waste reduction, the wise use
of resources and long-lasting,
energy-efficient products, we live
out the Integrity name.
Integrity from Marvin® Windows
and Doors has a long history
of green-minded initiatives with
recycling efforts, employee
awareness and incorporating green
components into our processes.
To see our list of numerous honors
and awards for green building
At Cybrid, we produce the top-quality polymeric ribbon tapes that reduces solder joint defects and enhances the performances of thinner silicon materials. http://www.cybridtechnologies.com/
The lightweight, heavy duty inspection pit with its unique design has resulted in performance capabilities superior to the traditional concrete pit, at a similar cost. Manufactured from a high performance polymer, the lightweight,
heavy duty inspection pit is UV stable and chemical resistant.
3M Scotchcast Resins are suitable for for low and high voltage electrical insulation and cabling applications. 3M Scotchcast resins have an excellent adhesion to cables and together with excellent mechanical, electrical and chemical resistance.
3M Scotchcast resins are suitable for all sizes and types of cables, cable joints and cable splices with VDE 0291 Part 2 approval.
3M Scotchcast Resins are 100% solids, thermosetting, electrical-grade insulating resins. Classified chemically as either Scotchcast epoxy resins or polyurethane resins, the 3M product line includes two-part epoxy liquids and two part polyurethane liquids.
Scotchcast resins unique electrical and physical properties make them ideal for insulating and protecting electrical/electronic parts and assemblies.
3M Scotchcast physical features also make them suitable for non-electrical, general use applications - for example, as adhesives and sealants.
Many markets have a requirement for rugged, high-reliability connectors, with the additional requirement for miniature size and minimal weight restrictions. Built to the same exacting standards as our Datamate range, Gecko delivers in these industries: UAVs, Autosport, CubeSats, Robotics, Oil & Gas
Cablofil EZ Path provides a complete a certified fire protection seal for cables and pipe entries or penetrations through fire rated walls and floors - Cablofil EZ Path maintains high performance wall and floor fire barrier.
Cablofil EZ Path offers fire protection (240 minutes) for fire rated floor and wall constructions in accordance with BS476 : Part 20 and European Standard EN1366-3.
Cablofil EZ Path - Intumescent Fire Barrier for Cables
Intumescent products expand with heat creating a fire barrier filling any gaps created as combustible through penetrations (ducts, service entries, floor and wall openings) burn away, which otherwise would leave an opening for the passage of toxic smoke, heated gasses and fire. Cablofil EZ Path provides airtight barriers for toxic smoke and gas ensuring personal safety during a fire. Where cables enter a fire barrer wall or floor Cablofil EZ Path firestop materials can be installed to restore an hourly fire-rating.
Two intumescent fire protection pads cushion and compress the cables top and bottom and prevent smoke propagation through the opening even if the intumescent material does not expand (Cold Smoke). Exposed to fire or high temperatures, the intumescent fire barrier responds to flames or heat by rapidly sealing the cable pathway, duct or service entry and preventing passage of flames and smoke. Cablofil EZ Path ensures maximum fire protection and resistance whether it is empty or full - therefore EZ Path provides excellent fire protection with every new or retrofit cable installation.
Built in Future Use - Cablofil EZ Path features a built-in firestopping system that automatically adjusts to the number of cables running through - cables can be added or changed without the need to remove and re-install fire stopping materials.
Cable Tray -cables present in cable tray can provide a source of fuel to propagate fire, release toxic smoke and gases. They create openings that can compromise the fire barrier allowing spread of fire, toxic smoke and superheated gases.
My-Pros installs a whole new roof system. most roofing contractors will just throw some shingles on the roof and call it good. When investing into a new roof can be expensive so why not make certain the new roof will last? Hire My-Pros www.myprosroofing.com
In sealing challenges when connecting fitting and glass doors we need to be careful to assure soft connection in order to protect and avoid damaging the connection. This has to be done without risking leaking connections.
Our answer is to use a TESNIT® product proving to supply a waterproof gasket.
It is not enough just to have a top-quality door hinge or fitting.
Especially heavy duty usage environment life calls for durability.
The TESNIT® product is composed of cellulose fibres, inorganic fillers and NBR binder.
As such, it has very good mechanical and sealing properties.
AKKO Refurbishment Services are pleased to introduce our extensive range of maintenance and refurbishment services to your practice / department.
Options Possibilities and Choices for Roof Upgarding or Replacement
With over a century of experience in the design, quality and installation of grain storage systems, Bentall Rowlands Storage Systems Limited is a leading UK manufacturer in complete storage and processing equipment for the agricultural and industrial markets.
Sustainability and environmental
responsibility influence every
aspect of our business. Through
waste reduction, the wise use
of resources and long-lasting,
energy-efficient products, we live
out the Integrity name.
Integrity from Marvin® Windows
and Doors has a long history
of green-minded initiatives with
recycling efforts, employee
awareness and incorporating green
components into our processes.
To see our list of numerous honors
and awards for green building
At Cybrid, we produce the top-quality polymeric ribbon tapes that reduces solder joint defects and enhances the performances of thinner silicon materials. http://www.cybridtechnologies.com/
The lightweight, heavy duty inspection pit with its unique design has resulted in performance capabilities superior to the traditional concrete pit, at a similar cost. Manufactured from a high performance polymer, the lightweight,
heavy duty inspection pit is UV stable and chemical resistant.
3M Scotchcast Resins are suitable for for low and high voltage electrical insulation and cabling applications. 3M Scotchcast resins have an excellent adhesion to cables and together with excellent mechanical, electrical and chemical resistance.
3M Scotchcast resins are suitable for all sizes and types of cables, cable joints and cable splices with VDE 0291 Part 2 approval.
3M Scotchcast Resins are 100% solids, thermosetting, electrical-grade insulating resins. Classified chemically as either Scotchcast epoxy resins or polyurethane resins, the 3M product line includes two-part epoxy liquids and two part polyurethane liquids.
Scotchcast resins unique electrical and physical properties make them ideal for insulating and protecting electrical/electronic parts and assemblies.
3M Scotchcast physical features also make them suitable for non-electrical, general use applications - for example, as adhesives and sealants.
Many markets have a requirement for rugged, high-reliability connectors, with the additional requirement for miniature size and minimal weight restrictions. Built to the same exacting standards as our Datamate range, Gecko delivers in these industries: UAVs, Autosport, CubeSats, Robotics, Oil & Gas
Kemppi's Reduced Gap Technology (RGT) challenges conventional joint design pr...Kemppi
Reducing the groove angle can add significantly to the efficiency and productivity of welding of heavy metal structures. The conventional narrow gap welding can be applied with most welding processes, but it has a disadvantage: It is practically impossible without equipment especially designed for the application. To overcome this constraint, Kemppi has developed a new solution, Reduced Gap Technology (RGT).
View the latest Gates Leak-free port to port brochure illustrating how Gates hydraulic products work together to give you just one part, or the complete solution to your fluid power needs.
Harwin’s Gecko (G125 series) connectors provide a low profile, dual row interconnect solution for cable-to-board, cable-to-cable and board-to-board. The product is ideally suited for stacking and cable mating in areas where PCB real estate is at a premium.
Traditionally, cables have been sealed using cable glands or compounds; however, Roxtec - a next-generation, certified, well-proven, modular-based sealing system offers substantial cost savings and flexibility compared to the old cable glands.
The outdoor silicone-rubber insulation design includes a skirt configuration that offers exceptional creep, strike, weather and contamination resistance, along with superior cable sealing and voltage withstand. All termination kits come complete with the housing and stress tube pre-assembled on the core, ready for quick and easy installation.
“The Ranger2® Shrink-Fit Terminations enhance the breadth of our Elastimold® line of pre-molded cable accessory components,” said Mike Jackson, Product Manager for Thomas & Betts. “Their design provides the superior skirt configurations for riser pole, pad-mounted and other installations exposed to the elements.”
The single-piece terminations for 15kV and 25kV applications feature shrink-fit design for effortless installation. The two-piece termination for 35kV applications facilitates easier core removal: one needs only to position the terminator on the prepared cable and remove the center core. The terminations are compact and lightweight to enable installations in restricted spaces and free-hanging applications.
Elastimold® Ranger2® Shrink-Fit Terminations 15-35kV meet or exceed all requirements of IEEE Standard 48 for Class 1 outdoor or Class 2 indoor terminations.
This kit is designed to replace the traditional method of Heatshrink Wrap-Around Sleeves, offering a single product capable of repairing any cable up to and including 170mm overall diameter. A totally enclosed mixing and pouring system enables a safer installation, and negates the need for naked flames or heat sources. The use of the resin outer encapsulation provides a secure mechanical protection, and is resistant to hydrocarbons and salt-water. The outer tape wrap and nozzle assembly can be cleanly removed, leaving a smooth profile suitable for cable-tray and bunched applications.
Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames, tested to BS EN1366-3 2009 / AS1530.4-2014 & LUL S1085 (London Underground)
A duct & conduit sealing brochure manufactured by Filoform and distributed by MAC Products Inc. in Kearny, New Jersey.
A properly designed and installed conduit and duct sealing system is essential for the safety and protection of the public and the protection and longevity of equipment. Hazards needing mitigation include:
Flammable and corrosive gases
Liquids including water and insulating fluids
Fire
FiloSeal+ has been tested an evaluated by Telstra and is suitable to for use on the Interconnect network in accordance with Telstra document ID TM00042A01
Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames
Up to 4 hours fire resistance in transit frames (single side)
Up to 4 hours fire resistance in ducts
Tested to BS EN1366-3 2009
Up to 2 bar Pressure Resistance
100Kg pulling Force on the cables when sealed
10xd at 45º, with 1 bar pressure bending test
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)
Filoform CPJ cable joint
1. 6
• The CPJ Joint has been designed in accordance with
BS7888:1998 specifically for use in Cathodic Protection appli-
cations, including pipelines, tanks and buried structures. The
accepted cable range for the CPJ kit is 70mm2 main with up
to 35mm2 branch; however, our standard range of Cast Resin
Branch Joints can be adapted to accommodate larger cable
diameters for Cathodic Protection applications.
• The CPJ can be supplied with or without Brass Line Taps as
standard.
Features
• Strong clear plastic mould body with Snaplock connection for tight seal
• Stepped cable entry cut off points for all cable diameters
• Large mould shell enables crimp or split bolt / line tap connectors to be used
• High quality resin sealing compound has a high resistance to moisture absorption, is mixed in a clear pack
and stored in an aluminium protective bag.
• The long term electrical properties of the resin sealing compound result in a more reliable connection
without any associated maintenance costs
• Resin sealing compound is suitable for all climate conditions
• Designed to meet the requirements of BS 7888:1998
• Specified by leading oil, gas and water companies and consulting engineers
Cathodic protection joint - CPJ
CABLE JOINTS
Item number Description Cable Diameter (mm) Dimensions (mm)
803000 Y-Branch joint max Ø 25 / 21 L142 x H73
Article No Description Dimensions (mm)
400506 Line tap 2x6.0mm 24 x 13
400516 Line tap 2x16mm 28 x 22
400525 Line tap 2x25mm 29 x 22
400535 Line tap 2x35mm 37 x 27
400550 Line tap 2x50mm 43 x 31
400575 Line tap 2x95mm 48 x 34
Full range of line taps available
