Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames, tested to BS EN1366-3 2009 / AS1530.4-2014 & LUL S1085 (London Underground)
This kit is designed to replace the traditional method of Heatshrink Wrap-Around Sleeves, offering a single product capable of repairing any cable up to and including 170mm overall diameter. A totally enclosed mixing and pouring system enables a safer installation, and negates the need for naked flames or heat sources. The use of the resin outer encapsulation provides a secure mechanical protection, and is resistant to hydrocarbons and salt-water. The outer tape wrap and nozzle assembly can be cleanly removed, leaving a smooth profile suitable for cable-tray and bunched applications.
RIW Cementjoint is an advanced, elastomeric, highly tear resistant, breathable, waterproof composite tape.
Find out more here:
http://www.riw.co.uk/uploads/downloads/RIW_CEMENTJOINT.pdf
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
FiloSeal+HD is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses strong, but flexible hexagonal tubes to support the cable and provide a strong backing for the seal
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
This kit is designed to replace the traditional method of Heatshrink Wrap-Around Sleeves, offering a single product capable of repairing any cable up to and including 170mm overall diameter. A totally enclosed mixing and pouring system enables a safer installation, and negates the need for naked flames or heat sources. The use of the resin outer encapsulation provides a secure mechanical protection, and is resistant to hydrocarbons and salt-water. The outer tape wrap and nozzle assembly can be cleanly removed, leaving a smooth profile suitable for cable-tray and bunched applications.
RIW Cementjoint is an advanced, elastomeric, highly tear resistant, breathable, waterproof composite tape.
Find out more here:
http://www.riw.co.uk/uploads/downloads/RIW_CEMENTJOINT.pdf
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
FiloSeal+HD is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses strong, but flexible hexagonal tubes to support the cable and provide a strong backing for the seal
CSD Rise Multi Cable & Pipe Sealing System - Features :
Simple and effective : RISE Duct Seals are a multi-cable and pipe transit sealing system providing an effective and simple solution to all fire, gas and water tight duct sealing requirements.
Few Components : RISE Duct Seals system consist of only two components - 1) rubber insert sleeves used to guarantee cable separation and as a backing for the sealant layer, 2) FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which makes the duct seal system quick and easy to install.
Water and Gas Tight : RISE Duct Seals provide high elasticity and bonding strength which resists movement, shock and vibration providing a stable duct seal. RISE rubber insert sleeves are applied to provide cable separation and a backing for the application of the FIWA sealant. 60mm RISE sleeves are adequate for water and gas tight duct sealing.
Fire, Water and Gas Tight : RISE Duct Seals using rubber insert sleeves at a length of 160mm and applying FIWA sealant to both faces of the opening will provide a fire tight duct seal.
Flexible and Versatile : RISE Duct Seals can be used in vertical and horizontal ducts. RISE rubber insert sleeves cling to the cables without sliding down and falling out of the penetration. The high adhesion and viscosity of the duct sealant means it will not run or drip when applied overhead.
Adding and Removing Cables : RISE Duct Seals allow the installing of additional cables - it is a simple matter of coring into the soft rubber of the sealant to a depth of 20mm and passing the additional cables through the opening created. The duct sealant is then applied around the new cable to re-seal - there is no need to disassemble the transit system.
Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames
Up to 4 hours fire resistance in transit frames (single side)
Up to 4 hours fire resistance in ducts
Tested to BS EN1366-3 2009
Up to 2 bar Pressure Resistance
100Kg pulling Force on the cables when sealed
10xd at 45º, with 1 bar pressure bending test
FiloSeal+ has been tested an evaluated by Telstra and is suitable to for use on the Interconnect network in accordance with Telstra document ID TM00042A01
Ruisen ®hvic high voltageinsulatorcoatingjamie cai
the HVIC RTV hydrophobic silicone coating designed for preventing flash-over tracking and current leakage,which has good water repellency and anti-wheather properties.it can be coated on porcelain,ceramic ,glass insulator and instrument transformer bushing
Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames
Up to 4 hours fire resistance in transit frames (single side)
Up to 4 hours fire resistance in ducts
Tested to BS EN1366-3 2009
Up to 2 bar Pressure Resistance
100Kg pulling Force on the cables when sealed
10xd at 45º, with 1 bar pressure bending test
FiloSeal+ has been tested an evaluated by Telstra and is suitable to for use on the Interconnect network in accordance with Telstra document ID TM00042A01
Ruisen ®hvic high voltageinsulatorcoatingjamie cai
the HVIC RTV hydrophobic silicone coating designed for preventing flash-over tracking and current leakage,which has good water repellency and anti-wheather properties.it can be coated on porcelain,ceramic ,glass insulator and instrument transformer bushing
With every passing day, we create more data that needs to be stored in our servers. As servers become more complex, server rooms & computer rooms become the heart of every organization and monitoring & managing data centers become a critical task. One of the biggest concerns for all data center personnel is energy consumption efficiency and Unitile brings just the right solution! Unitile Data Center solutions are not only energy-efficient, but also healthy, secure, and cost-effective. They bring compelling returns on investments with lower set-up costs in both, new build & retrofit applications.
Cool Shield Data Center Aisle Containment CapabilitiesSteven Sieja
Cool Shield aisle containment solutions provide customers with a versatile turnkey product in new or existing data centers. Our data center aisle containment solution ranges from a single row in an existing server room to entire data halls in new facilities.
https://cool-shield.com/
Ash and lacy sa spacer support system a4 12pp v1 hiVaughn Botha
As part of our programme of continuous innovation, Ash & Lacy introduce the high performance Ashgrid bar and brackets incorporating the unique Safe-Loc™ feature (patented). Designed to meet the everincreasing demands from Building Regulations whilst at the same time making installation more efficient and safer for contractors on site.
All spacer support systems are at risk during the installation stage when they are not restrained by the sheeting and are subjected to forces from foot traffic, temporary loading and high winds
GaskeTech represents the best in Custom Gaskets And Seals for a wide range of applications.GaskeTech cuts all types of gaskets including non asbestos, Teflon, cork, vegetable fiber and all rubber compounds including neoprene, epdm, nitrile, sbr, graphite sheets, viton, ptfe sheets and natural rubber. We also die cut or slit into rolls closed cell products such as neoprene and cross linked polyethylene.For More information on custom gaskets and seals please visit us at http://www.gasketech.com/.
When it's time to install a fence or railing, whether it be for privacy, security, or both, Mitten provides a full offering of options that will save time and money for the both the Pro and DIYer.
A duct & conduit sealing brochure manufactured by Filoform and distributed by MAC Products Inc. in Kearny, New Jersey.
A properly designed and installed conduit and duct sealing system is essential for the safety and protection of the public and the protection and longevity of equipment. Hazards needing mitigation include:
Flammable and corrosive gases
Liquids including water and insulating fluids
Fire
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
1. Watch the FiloSeal+HD productvideo online on our website.
FiloSeal+HD FIRE provides a strong support system using
our specially formulated material called Formite which
builds up like a honeycomb structure.
FiloSeal+HD FIRE is suitable for sealing any cable
allows easy re-entry of the seal to add or remove cables
or pipes as required.
The Filoform duct sealing system FiloSeal+HD FIRE uses
our MD+ sealant which is easily applied from a skeleton
gun. The high quality, one component,
that cures with air (Humidity).
The unique design of the hexagonal tubes makes
positioning and separation of the cables very simple
while also providing a strong backing for the MD+
to be applied on.
• Tested to BS EN1366-3 2009 & AS1530.4-2014
• Tested to London Underground - LUL S1085
• Tested to European rail - BS EN 45545-2:2013
• Tested to French rail standard CIt NF F16-101
• Up to 2 bar Pressure Resistance
• 100Kg pulling Force on the cables when sealed
• 10xd at 45º, with 1 bar pressure bending test
Product Name Duct diameter min.-max. (mm) Order unit
FiloSeal+HD FIRE - 75 mm > 110 mm Ø 110 max. per piece
FiloSeal+HD FIRE - 125 mm > 160 mm Ø 160 max. per piece
FiloSeal+HD FIRE - 180 mm Ø 180 max. per piece
FiloSeal+HD FIRE - 200 mm Ø 200 max. per piece
FiloSeal+HD FIRE - 225 mm Ø 225 max. per piece
FiloSeal+HD FIRE - 250 mm Ø 250 max. per piece
FEATURES
•
building materials
• Resistant against Water, Alkaline, Chemical
agents
• Non corrosive
• Complies with ATEX regulations
opening
• Quick and easy installation
• A complete kit
retrospectively
• Resistant to Rats
2. The frames are modular in construction based
around a working opening size of 120 x 120 and can
be assembled in almost any size required. The frames
are made of 6mm steel which is zinc plated to give a
longer life.
Use of Filoseal+HD FIRE in these frames has been
tested to BS EN1366-3:2009 & AS1530.4-2014 for a
period of up to 4 hours on a standard installation.
Frames are a worthy addition to the Filoseal+HD and
HD FIRE ranges as they are a problem solver in the
following situations:
1. Irregular openings in a wall – frame neatens the
install
2. Walls of a poorer quality – frame stops reliance of
seal bonding to structure
3. Ducts with too many cables – frame allows splaying
of cables to obtain a proper seal.
4. Large cable runs such as a riser can be neatly
sealed.
With this design of seal system, accompanied
by these frames, the need for upfront design is
have performed all the tests we can on it to give you
There is no need to get into complicated modular
approved Filoseal+HD and Filoseal+HD FIRE systems
which need little to no upfront design in order to be
incorporated into your project.
In order for us to quote you, please advise the wall
opening size and layout of cables. We can work out
your needs based upon this and provide a CAD based
drawing of our solution.
The frames can be assembled around existing cable
runs which minimizes (or should that be eliminates)
down time of whatever your cables are connected to.
A frame
120 x 120 mm
FEATURES
Designed to partner with the Filoseal+HD and
hold a seal where the space or structure will not
the features of Filoseal+HD and Filoseal+HD Fire
• 100Kg pulling Force on the cables when sealed
3. The modularity of the frame is based around two
opening sizes; they are 120 x 120mm (type A) or 120
x 240mm (type B) which somewhat follows the frame
larger hole, we build a multi-opening frame to suit the
application.
Built frames - ( A Frame & B Frame)
Built frame size notation.
Frames of Type A (120 x 120 opening). For clarity, all
frames are 120 wide, it is the height that changes.
Frames types followed by an ‘xn’ notation means
there are n number of openings set out horizontally
in a row.
Frames types followed by a ‘+type A or B’ notation
mean the frames are stacked vertically on top of each
other.
So a frame denoted A+A+A x8 means there are 24
openings in total of size A, in columns of 3 high 8
times over.
A frame
120 x 120 mm
Cable Transit Frame Key
A+A+A x 3 (9 openings,
3 in a row x 3 high
120x120mm)
A+A+A (3 openings on top
of each other 120x120)
A+A x 2 (4 openings, 2 in a row
x 2 high 120x120mm)
A+A (2 openings on top
of each other 120x120)
A x 2 (2 openings, side by side
120x120mm)
A x 1 (1 opening, 120x120mm)
4. The frames are modular in construction based
around a working opening size of 240 x 120 and can
be assembled in almost any size required. The
frames are made of 6mm steel which is zinc plated to
give a longer life.
Use of Filoseal+HD FIRE in these frames has been
tested to BS EN1366-3:2009 & AS1530.4-2014 for a
period of up to 4 hours on a standard installation.
Frames are a worthy addition to the Filoseal+HD and
HD FIRE ranges as they are a problem solver in the
following situations:
1. Irregular openings in a wall – frame neatens the
install
2. Walls of a poorer quality – frame stops reliance of
seal bonding to structure
3. Ducts with too many cables – frame allows splaying
of cables to obtain a proper seal.
4. Large cable runs such as a riser can be neatly
sealed.
With this design of seal system, accompanied
by these frames, the need for upfront design is
have performed all the tests we can on it to give you
There is no need to get into complicated modular
approved Filoseal+HD and Filoseal+HD FIRE systems
which need little to no upfront design in order to be
incorporated into your project.
In order for us to quote you, please advise the wall
opening size and layout of cables. We can work out
your needs based upon this and provide a CAD based
drawing of our solution.
The frames can be assembled around existing cable
runs which minimizes (or should that be eliminates)
down time of whatever your cables are connected to.
B frame
120 x 240 mm
FEATURES
Designed to partner with the Filoseal+HD and
hold a seal where the space or structure will not
the features of Filoseal+HD and Filoseal+HD Fire
• 100Kg pulling Force on the cables when sealed
5. The modularity of the frame is based around two
opening sizes; they are 120 x 120mm (type A) or 120
x 240mm (type B) which somewhat follows the frame
larger hole, we build a multi-opening frame to suit the
application.
Built frames - ( A Frame & B Frame)
Built frame size notation.
Frames of Type B (120 x 240 opening. For clarity, all
frames are 120 wide, it is the height that changes.
Frames types followed by an ‘xn’ notation means
there are n number of openings set out horizontally
in a row.
Frames types followed by a ‘+type A or B’ notation
mean the frames are stacked vertically on top of each
other.
So a frame denoted B+B+B x8 means there are 24
openings in total of size B, in columns of 3 high 8
times over.
B frame
120 x 240 mm
Cable Transit Frame Key
B+B+B x 3 (9 openings,
3 in a row x 3 high
120x240mm)
B+B+B (3 openings on top
of each other 120x240)
B+B x 2 (4 openings, 2 in a row
x 2 high 120x240mm)
B+B (2 openings on top
of each other 120x240)
B x 2 (2 openings, side by side
120x240mm)
B x 1 (1 opening, 120x240mm)
6. running water getting into a building or enclosure.
water is still evident.
the user with a method of preventing the water from
ruining any permanent sealing system whilst that
system is installed.
The kit provides a method of damming or blocking
controlling it and stopping it.
Dam being
created with
FiloSeal+
Dam being
created with
FiloSeal+HD
Full coverage
using
putty with
FiloSeal+HD
Running Water Blocking Kit
Can be used with FiloSeal+, FiloSeal+HD
FEATURES
• Non hazardous
• No shelf life
• Allows pressure release before adding a new
Product Name Description Used with Duct Size Order Unit
FiloSeal -
Water blocking kit - small
Water blocking kit with pipe & tap FiloSeal+ 125mm Up to 125mm Per kit
FiloSeal+
Water blocking kit – large
Water blocking kit with pipe & tap FiloSeal+ 200mm 125mm to 200mm Per kit
FiloSeal+HD –
Water Blocking kit - small
Water blocking kit with pipe & tap –
Dam and full coverage can be achieved
FiloSeal+HD –
110mm
Up to 110mm Per kit
FiloSeal+HD –
Water Blocking kit - Large
Water blocking kit with pipe & tap –
Dam and full coverage can be achieved
FiloSeal+HD –
160mm
125mm to 160mm Per kit
7. Filoform BV
De Panoven 17
4191 GW Geldermalsen-NL
Netherlands
T +31 (0) 345 58 82 20
F +31 (0) 345 52 82 21
Filoform UK Ltd
Unit K, Lambs Farm Business Park
Reading RG7 1PQ
T +44 (0) 1189 886873
F +44 (0) 1189 886576
Filoform DE
GT Elektrotechnische Produkte GmbH
Kupferschmidstraße 86
79761 Waldshut-Tiengen
T +49 (0) 77 41 / 92 25-0
F +49 (0) 77 41 / 92 25-29
group