23 Hour Plumbing are your Plumbing Services experts. Blocked drains, burst pipes, hydro-jetting, blocked toilets, leaking taps, no hot water, gas leaks.

1. PLUMBING
PLUMBING SYSTEM, PLAN, TOOLS, FIXTURES USED.

2. INTRODUCTION
• The residential plumbing system have two sides
supply and the waste.
• A Good plumbing system provides an adequate
supply of water and removes waste without
affecting the living environment.
• There are three principal parts:
1.Water supply system.
2.Water and waste removal system.
3.Plumbing fixtures.

3. TYPICAL DRAINAGE SYSTEM

4. TRAPS
• Traps are used to prevent sewer odors
sewer gases from entering a the living or
work space, building and causing serious
illness or death.
• The trap most commonly used with
plumbing fixtures is the P-trap. The P-trap
gets its name because of its general shape-
that of the letter P.
• The term Trap Seal refers to the water
being held in the bent portion of a fixture
trap. The trap seal forms a seal against the
passage of sewer gases through the trap
and into the building.

5. PLUMBING SYMBOLS

6. PLUMBING FIXTURE SCHEDULE

7. PLUMBING PLANS
• The Plumbing Plan is a annotated diagram or schematics of
the complete plumbing system. The plumbing plan shows
the location, size, and type of all plumbing equipment.
• The plumbing plan should include:
• Waste lines and vent stacks.
• Drain and plumbing fixture locations.
• Size and type of pipe to be used.
• A plumbing fixture schedule.
• Symbols Legend.
• General notes.
• A plumbing plan is required for each floor of the house.

8. PREPARED BY:
www.23hourplumbing.com.au
For more info Contact Us on – 1300 070 399

9. THANK YOU!!