This document provides information about simple harmonic motion over 6 hours. It begins by defining simple harmonic motion as periodic motion where the acceleration is directly proportional to and opposite of the displacement from equilibrium. Key equations for displacement, velocity, acceleration, kinetic energy and potential energy in SHM are given. Examples of simple harmonic motion include a simple pendulum and spring oscillations. The chapter then discusses the kinematics of SHM, deriving equations for displacement, velocity, acceleration and energies as functions of time and angular frequency.
This Unit is rely on introduction to Simple Harmonic Motion. the contents was prepared using the Curriculum of NTA level 4 at Mineral Resources Institute- Dodoma.
This Unit is rely on introduction to Simple Harmonic Motion. the contents was prepared using the Curriculum of NTA level 4 at Mineral Resources Institute- Dodoma.
This topic is about Free Oscillation.
Spring-Mass system is an application of Simple Harmonic Motion (SHM).
This topic is Depend on the Ordinary Differential Equation.
Learn Online Courses of Subject Engineering Mechanics of First Year Engineering. Clear the Concepts of Engineering Mechanics Through Video Lectures and PDF Notes. Visit us: https://ekeeda.com/streamdetails/subject/Engineering-Mechanics
Introduction to oscillations and simple harmonic motionMichael Marty
Physics presentation about Simple Harmonic Motion of Hooke's Law springs and pendulums with derivation of formulas and connections to Uniform Circular Motion.
References include links to illustrative youtube clips and other powerpoints that contributed to this peresentation.
This topic is about Free Oscillation.
Spring-Mass system is an application of Simple Harmonic Motion (SHM).
This topic is Depend on the Ordinary Differential Equation.
Learn Online Courses of Subject Engineering Mechanics of First Year Engineering. Clear the Concepts of Engineering Mechanics Through Video Lectures and PDF Notes. Visit us: https://ekeeda.com/streamdetails/subject/Engineering-Mechanics
Introduction to oscillations and simple harmonic motionMichael Marty
Physics presentation about Simple Harmonic Motion of Hooke's Law springs and pendulums with derivation of formulas and connections to Uniform Circular Motion.
References include links to illustrative youtube clips and other powerpoints that contributed to this peresentation.
Physics numerical solutions, kinematics numericals solutions karachi board, federal board physics, SUVAT problems, metric physics solutions karachi, Physics solved numericals of Karachi board,Numericals of Physics metric (X) Federal Board,Federal Board Class X Physics SSC (9th & 10th),9th class physics numerical,Q1. A car is moving on a straight road at 5 m/s. It is accelerated at 3 m/s. What will be its velocity after 4 seconds?Q.2. A bullet train starts from rest and moves with uniform acceleration of 0.12 m/s2. Find its final velocity and distance covered after 5 minutes?Q.3. A bus is moving with a velocity of 72 km/hr. By applying brakes, a deceleration of 0.4 m/s2 is produced. Find the distance, covered by the bus before it stops?Q.4. What is the acceleration of an object which accelerates along a straight path from rest, and attains a velocity of 20 m/s after covering a distance of 50 m in 5 s?Q.5. a wicket keeper catches a ball moving at 30 m/s.
(a) if he does not move his hand the ball comes to rest in his glove over a distance of 1 cm. What is the average acceleration?(b) If he moves his hand as the ball is caught so that it comes to rest over 10 cm. What is its acceleration?
for complete solutions visit our blog: http://hometuitionsinkarachi.over-blog.com
Oscillation is the repetitive variation, typically in time, of some measure about a central value (often a point of equilibrium) or between two or more different states. The term vibration is precisely used to describe mechanical oscillation. Familiar examples of oscillation include a swinging pendulum and alternating current.
Oscillations occur not only in mechanical systems but also in dynamic systems in virtually every area of science: for example the beating of the human heart (for circulation), business cycles in economics, predator–prey population cycles in ecology, geothermal geysers in geology, vibration of strings in guitar and other string instruments, periodic firing of nerve cells in the brain, and the periodic swelling of Cepheid variable stars in astronomy. Contents
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
GridMate - End to end testing is a critical piece to ensure quality and avoid...ThomasParaiso2
End to end testing is a critical piece to ensure quality and avoid regressions. In this session, we share our journey building an E2E testing pipeline for GridMate components (LWC and Aura) using Cypress, JSForce, FakerJS…
2. PHYSICS 025 CHAPTER 9
Learning Outcome:
9.1 Simple harmonic motion (1 hour)
At the end of this chapter,
students should be able to: REMARKS :
a) Explain SHM as periodic Examples : simple
motion without loss of energy. pendulum, frictionless
horizontal and vertical
b) Introduce and use SHM spring oscillations.
formulae:
2
d x
a 2 2 x
dt
2
3. PHYSICS 025 CHAPTER 9
9.1 Simple harmonic motion
9.1.1 Simple harmonic motion (SHM)
is defined as the periodic motion without loss of energy in
which the acceleration of a body is directly proportional to
its displacement from the equilibrium position (fixed point)
and is directed towards the equilibrium position but in
opposite direction of the displacement.
OR mathematically,
d 2x
a x 2
2
(9.1)
dt
where a : accelerati on of the body
ω : angular ve locity(ang ular frequency)
x : displaceme nt from the equilibriu m position, O
3
4. PHYSICS 025 CHAPTER 9
The angular frequency, always constant thus
a x
The negative sign in the equation 9.1 indicates that the
direction of the acceleration, a is always opposite to the
direction of the displacement, x.
The equilibrium position is a position at which the body would
come to rest if it were to lose all of its energy.
When the body in SHM is at the point of equilibrium.
displacement x = 0
acceleration a = 0
resultant force on the body F = 0
4
5. PHYSICS 025 CHAPTER 9
o The displacement x is measured from the point of equilibrium.
The maximum distance from the point of equilibrium is known as
the amplitude of the simple harmonic motion.
o The period T of a simple harmonic is the time taken for a
complete oscillation.
o The frequency f of the motion is the number of complete
oscillations per second.
1
frequency, f
period
The unit of frequency is the hertz (Hz).
5
6. PHYSICS 025 CHAPTER 9
Equation 9.1 is the hallmark of the linear SHM.
Examples of linear SHM system are simple pendulum,
horizontal and vertical spring oscillations as shown in Figures
9.1a, 9.1b and 9.1c.
a
Fs
m
x O x
Figure 9.1a
6
7. PHYSICS 025 CHAPTER 9
x
a
O Fs
m
x m x x
Fs a O
Figure 9.1b Figure 9.1c
7
8. PHYSICS 025 CHAPTER 9
Exercise
A particle in simple harmonic motion
makes 20 complete oscillations in 5.0
s. what is
a. the frequency
b. the period
of the motion
8
9. PHYSICS 025 CHAPTER 9
Solution:
20
a. frequency, f = Hz 4.0 Hz
5.0
1 1
b. period, T = s 0.25s
f 4.0
9
10. PHYSICS 025 CHAPTER 9
Learning Outcome:
9.2 Kinematics of SHM (2 hours)
At the end of this chapter, students should be able to:
a) Write and use SHM displacement equation x A sin t
b) Derive and apply equations for :
i) velocity, dx
v A2 x 2
dt
ii) acceleration, dv d 2 x
a 2 2 x
dt dt
iii) kinetic energy, 1
K m 2 A2 x 2
2
iv) potential energy,
1
U m 2 x 2
2
10
11. PHYSICS 025 CHAPTER 9
9.2 Kinematics of SHM
9.2.1 Displacement, x
Uniform circular motion can be translated into linear SHM and
obtained a sinusoidal curve for displacement, x against angular
displacement, graph as shown in Figure 9.6.
x
S A
Simulation 9.3
N x1
M
A
1
O P 0 1 3 2 (rad)
2 2
A
Figure 9.6 T 11
12. PHYSICS 025 CHAPTER 9
At time, t = 0 the object is at point M (Figure 9.6) and after time t
it moves to point N , therefore the expression for displacement,
x1 is given by
x1 A sin 1 where 1 and t
x1 A sin t
In general the equation of displacement as a function of time
in SHM is given by phase
equilibrium position x A sin t
displacement from
(9.4)
Initial phase angle
amplitude (phase constant)
angular time
frequency
The S.I. unit of displacement is metre (m).
Phase
It is the time-varying quantity t .
Its unit is radian.
12
13. PHYSICS 025 CHAPTER 9
Initial phase angle (phase constant),
It is indicate the starting point in SHM where the time, t = 0 s.
If =0 , the equation (9.4) can be written as
x A sin t
where the starting point of SHM is at the equilibrium position,
O.
For examples:
a. At t = 0 s, x = +A
x A sin t
A A sin 0
A O A rad
2
Equation : x A sin t OR x A cost
2
13
14. PHYSICS 025 CHAPTER 9
b. At t = 0 s, x = A
x A sin t
A A sin 0
3
rad OR rad
A O A 2 2
3 x A sin t
Equation : x A sin t OR
2 2
OR x A cost
c. At t = 0 s, x = 0 but v = vmax
,
vmax
A O A
Equation : x A sin t OR x A sin t
14
15. PHYSICS 025 CHAPTER 9
9.2.2 Velocity, v
From the definition of instantaneous velocity,
dx
v and x A sin t
dt
v A sin( t )
d
dt
v A sin( t )
d
dt
v A cos(t ) (9.5)
Eq. (9.5) is an equation of velocity as a function of time in SHM.
The maximum velocity, vmax occurs when cos(t+)=1
hence
v A max (9.6)
15
16. PHYSICS 025 CHAPTER 9
The S.I. unit of velocity in SHM is m s1.
If = 0 , equation (9.5) becomes
v A cos t
Relationship between velocity, v and displacement, x
From the eq. (9.5) :
v A cos(t ) (1)
From the eq. (9.4) :
x A sin t
sin t
x
(2)
A
From the trigonometry identical,
sin 2 cos 2 1and t
cost 1 sin t
2
(3)
16
17. PHYSICS 025 CHAPTER 9
By substituting equations (3) and (2) into equation (1), thus
2
x
v A 1
A
x2
v A2 A2 2
A
v A x 2 2
(9.7)
17
18. PHYSICS 025 CHAPTER 9
9.2.3 Acceleration, a
From the definition of instantaneous acceleration,
and v A cost
dv
a
dt
a A cos(t )
d
dt
a A cos(t )
d
dt
a A sin( t )
2
(9.8)
Eq. (9.8) is an equation of acceleration as a function of time in
SHM.
The maximum acceleration, amax occurs when sin(t+)=1
hence
a A 2max
(9.9)
18
19. PHYSICS 025 CHAPTER 9
The S.I. unit of acceleration in SHM is m s2.
If = 0 , equation (9.8) becomes
a A sin t
2
Relationship between acceleration, a and displacement, x
From the eq. (9.8) :
a 2 A sin( t ) (1)
From the eq. (9.4) :
x A sin t
(2)
By substituting eq. (2) into eq. (1), therefore
a x 2
19
20. PHYSICS 025 CHAPTER 9
Caution :
Some of the reference books use other general equation for
displacement in SHM such as
x A cost (9.10)
The equation of velocity in term of time, t becomes
dx
v A sin( t ) (9.11)
dt
And the equation of acceleration in term of time, t becomes
dv
a A 2 cos(t ) (9.12)
dt
20
21. PHYSICS 025 CHAPTER 9
9.2.4 Energy in SHM
Potential energy, U
Consider the oscillation of a spring as a SHM hence the
potential energy for the spring is given by
1 2
U kx and k m 2
2
1
U m x
2 2
(9.13)
2
The potential energy in term of time, t is given by
1
U m 2 x 2 and x A sin t
2
U m A sin t
1 2 2 2
(9.14)
2 21
22. PHYSICS 025 CHAPTER 9
Kinetic energy, K
The kinetic energy of the object in SHM is given by
1 2
K mv and v A2 x 2
2
K m 2 A2 x 2
1
(9.15)
2
The kinetic energy in term of time, t is given by
K mv and v A cost
1 2
2
K m A cos t
1 2 2 2
(9.16)
2
22
23. PHYSICS 025 CHAPTER 9
Total energy, E
The total energy of a body in SHM is the sum of its kinetic
energy, K and its potential energy, U .
E K U
From the principle of conservation of energy, this total energy is
always constant in a closed system hence
E K U constant
The equation of total energy in SHM is given by
1
2
2 2 2
1
E m A x m 2 x 2
2
1
E m A
2 2
(9.17)
2
Simulation 9.4
1 2
OR E kA (9.18)
2 23
24. PHYSICS 025 CHAPTER 9
Example 3 :
An object executes SHM whose displacement x varies with time t
according to the relation
x 5.00 sin 2t
2
where x is in centimetres and t is in seconds.
Determine
a. the amplitude, frequency, period and phase constant of the
motion,
b. the velocity and acceleration of the object at any time, t ,
c. the displacement, velocity and acceleration of the object at
t = 2.00 s,
d. the maximum speed and maximum acceleration of the object.
24
25. PHYSICS 025 CHAPTER 9
Solution :
a. By comparing
x 5.00 sin 2t with x A sin t
thus 2
i. A 5.00 cm
ii. 2 rad s 1
and 2f
2f 2
f 1.00 Hz
iii. The period of the motion is
1 1
f 1.00
T T
T 1.00 s
iv. The phase constant is
rad
2 25
26. PHYSICS 025 CHAPTER 9
Solution :
b. i. Differentiating x respect to time, thus
dx d
v 5.00 sin 2t
dt dt 2
v 5.002 cos 2t
2
v 10.0 cos 2t
2
where v is in cm s 1 and t is in seconds.
26
27. PHYSICS 025 CHAPTER 9
Solution :
b. ii. Differentiating v respect to time, thus
dv d
a 10.0 cos 2t
dt dt 2
a 10.0 2 sin 2t
2
a 20.0 sin 2t
2
2
where a is in cm s 2 and t is in seconds.
27
28. PHYSICS 025 CHAPTER 9
Solution :
c. For t = 2.00 s
i. The displacement of the object is
x 5.00 sin 2 2.00
2
x 5.00 cm
ii. The velocity of the object is
v 10.0 cos 2 2.00
1
2
v 0.00 cm s
OR
v A x 2 2
v 2 5.00 5.00
2 2
1
v 0.00 cm s
28
29. PHYSICS 025 CHAPTER 9
Solution :
c. For t = 2.00 s
iii. The acceleration of the object is
a 20.0 sin 2 2.00
2
2
a 20.0 2 cm s 2 197 cm s 2
OR
a 2 x
a 2 5.00
2
a 20.0 cm s 197 cm s
2 2 2
29
30. PHYSICS 025 CHAPTER 9
Solution :
d. i. The maximum speed of the object is given by
vmax A
vmax 5.002
vmax 10.0 cm s 1
ii. The maximum acceleration of the object is
amax A 2
amax 2 5.00
2
amax 20.0 2 cm s 2
30
31. PHYSICS 025 CHAPTER 9
Example 4 :
The length of a simple pendulum is 75.0 cm and it is released at an
angle 8 to the vertical. Calculate
a. the frequency of the oscillation,
b. the pendulum’s bob speed when it passes through the lowest
point of the swing.
(Given g = 9.81 m s2)
Solution :
L
8
A
m
A O A 31
32. PHYSICS 025 CHAPTER 9
Solution : L 0.75 m; 8
a. The frequency of the simple pendulum oscillation is
1 L
f and T 2
T g
1 g
f
2 L
1 9.81
f f 0.576 Hz
2 0.75
b. At the lowest point, the velocity of the pendulum’s bob is
maximum hence v A and A L sin 8
max
vmax L sin 8 2f
vmax 0.75 sin 8 2 0.576
1
vmax 0.378 m s
32
33. PHYSICS 025 CHAPTER 9
Example 5 :
A body hanging from one end of a vertical spring performs vertical
SHM. The distance between two points, at which the speed of the
body is zero is 7.5 cm. If the time taken for the body to move
between the two points is 0.17 s, Determine
a. the amplitude of the motion,
b. the frequency of the motion,
c. the maximum acceleration of body in the motion.
Solution :
a. The amplitude is
7.5 102
A 3.75 102 m
2
A b. The period of the motion is
T 2t 20.17
7.5 cm O t 0.17 s
m T 0.34 s
A 33
34. PHYSICS 025 CHAPTER 9
Solution :
b. Therefore the frequency of the motion is
1 1
f
T 0.34
f 2.94 Hz
c. From the equation of the maximum acceleration in SHM, hence
amax A 2 and 2f
A2f
2
amax
amax 2
3.75 10 2 2.94
2
amax 12.8 m s 2
34
35. PHYSICS 025 CHAPTER 9
Example 6 :
An object of mass 450 g oscillates from a vertically hanging light
spring once every 0.55 s. The oscillation of the mass-spring is
started by being compressed 10 cm from the equilibrium position
and released.
a. Write down the equation giving the object’s displacement as a
function of time.
b. How long will the object take to get to the equilibrium position
for the first time?
c. Calculate
i. the maximum speed of the object,
ii. the maximum acceleration of the object.
35
36. PHYSICS 025 CHAPTER 9
Solution : m 0.450 kg; T 0.55 s
a. The amplitude of the motion is A 10 cm
The angular frequency of the oscillation is
2 2
T 0.55
10 cm m t 0 11.4 rad s 1
and the initial phase angle is given by
0 x A sin t
A A sin 0
10 cm
rad
2
Therefore the equation of the displacement as a function of time is
x A sin t
x 10 sin 11.4t OR x 10 cos11.4t
2
where x is in cm and t is in seconds. 36
37. PHYSICS 025 CHAPTER 9
Solution : m 0.450 kg; T 0.55 s
b. At the equilibrium position, x = 0
T 0.55
x 10 sin 11.4t OR t
2 4 4
t 0.138 s
0 10 sin 11.4t
2
11.4t sin 0
1
2
11.4t
2
t 0.138 s
37
38. PHYSICS 025 CHAPTER 9
Solution : m 0.450 kg; T 0.55 s
c. i. The maximum speed of the object is
vmax A
vmax 0.111.4
vmax 1.14 m s 1
ii. The maximum acceleration of the object is
amax A 2
amax 0.111.4
2
amax 13.0 m s 2
38
39. PHYSICS 025 CHAPTER 9
Example 7 :
An object of mass 50.0 g is connected to a spring with a force
constant of 35.0 N m-1 oscillates on a horizontal frictionless surface
with an amplitude of 4.00 cm. Determine
a. the total energy of the system,
b. the speed of the object when the position is 1.00 cm,
c. the kinetic and potential energy when the position is 3.00 cm.
3 1 2
Solution : m 50.0 10 kg; k 35.0 N m ; A 4.00 10 m
a. By applying the equation of the total energy in SHM, thus
1 2
E kA
2
1
2
E 35.0 4.00 10 2 2
E 2.80 102 J
39
40. PHYSICS 025 CHAPTER 9
Solution : m 50.0 103 kg; k 35.0 N m1; A 4.00 102 m
b. The speed of the object when x = 1.00 102 m
k
v A x and
2 2
m
v
m
k
A x
2 2
v
35.0
50.0 10 3
4.00 10 1.00 10
2 2 2 2
1
v 1.03 m s
40
41. PHYSICS 025 CHAPTER 9
Solution : m 50.0 103 kg; k 35.0 N m1; A 4.00 102 m
c. The kinetic energy of the object when x = 3.00 102 m is
1
K m A x
2
2 2
2 and
k m 2
1
K k A2 x 2
2
1
2
K 35.0 4.00 10 3.00 10
2 2 2 2
K 1.23 102 J
and the potential energy of the object when x = 3.00 102 m is
1 2
U kx
2 2
U 35.0 3.00 10
1 2
2
U 1.58 102 J
41
42. PHYSICS 025 CHAPTER 9
Exercise 9.1 :
1. A mass which hangs from the end of a vertical helical spring is
in SHM of amplitude 2.0 cm. If three complete oscillations take
4.0 s, determine the acceleration of the mass
a. at the equilibrium position,
b. when the displacement is maximum.
ANS. : U think ; 44.4 cm s2
2. A body of mass 2.0 kg moves in simple harmonic motion. The
displacement x from the equilibrium position at time t is given by
x 6.0 sin 2 t
6
where x is in metres and t is in seconds. Determine
a. the amplitude, period and phase angle of the SHM.
b. the maximum acceleration of the motion.
c. the kinetic energy of the body at time t = 5 s.
ANS. : 6.0 m, 1.0 s, rad ; 24.02 m s2; 355 J 42
3
43. PHYSICS 025 CHAPTER 9
3. A horizontal plate is vibrating vertically with SHM at a frequency
of 20 Hz. What is the amplitude of vibration so that the fine sand
on the plate always remain in contact with it?
ANS. : 6.21104 m
4. An object of mass 2.1 kg is executing simple harmonic motion,
attached to a spring with spring constant k = 280 N m1. When
the object is 0.020 m from its equilibrium position, it is moving
with a speed of 0.55 m s1. Calculate
a. the amplitude of the motion.
b. the maximum velocity attained by the object.
ANS. : 5.17102 m; 0.597 m s1
5. A simple harmonic oscillator has a total energy of E.
a. Determine the kinetic energy and potential energy when the
displacement is one half the amplitude.
b. For what value of the displacement does the kinetic energy
equal to the potential energy?
ANS. : 3 1 2
E , E; A
4 4 2 43
44. PHYSICS 025 CHAPTER 9
Learning Outcome:
9.3 Graphs of SHM (2 hours)
At the end of this chapter, students should be able to:
Sketch, interpret and distinguish the following graphs:
displacement - time
velocity - time
acceleration - time
energy - displacement
44
45. PHYSICS 025 CHAPTER 9
9.3 Graphs of SHM
9.3.1 Graph of displacement-time (x-t)
From the general equation of displacement as a function of time
in SHM,
x A sin t
If = 0 , thus x A sin t
The displacement-time graph is shown in Figure 9.7.
x
Period
A
Amplitude
0 T T 3T T t
4 2 4
Simulation 9.5
A
Figure 9.7 45
46. PHYSICS 025 CHAPTER 9
For examples:
a. At t = 0 s, x = +A
Equation: x A sin t OR x A cost
Graph of x against t: 2
x
A
0 T T 3T T t
4 2 4
A
46
47. PHYSICS 025 CHAPTER 9
b. At t = 0 s, x = A
3
Equation: x A sin t OR x A sin t
2 2
OR x A cost
Graph of x against t:
x
A
0 T T 3T T t
4 2 4
A
47
48. PHYSICS 025 CHAPTER 9
c. At t = 0 s, x = 0, but v = vmax
Equation: x A sin t OR x A sin t
Graph of x against t:
x
A
0 T T 3T T t
4 2 4
A
48
49. PHYSICS 025 CHAPTER 9
How to sketch the x against t graph when 0
Sketch the x against t graph for the following expression:
π
x 5 cm sin 3t
From the expression,
2
the amplitude, A 5 cm
2 2
the angular frequency, 3
1
rad s T s
T 3
Sketch the x against t graph for equation x 5 sin 3t
x(cm)
T5
4
0 t (s )
1 2
3 3
5
49
50. PHYSICS 025 CHAPTER 9
T
Because of rad t hence shift the y-axis to the
2 4 left by T
Sketch the new graph. 4
x(cm)
5
0 t (s )
1 2
3 3
5
RULES
If = negative value
shift the y-axis to the left
If = positive value
shift the y-axis to the right
50
51. PHYSICS 025 CHAPTER 9
9.3.2 Graph of velocity-time (v-t)
From the general equation of velocity as a function of time in
SHM,
v A cos t
If = 0 , thus v A cost
The velocity-time graph is shown in Figure 9.8.
v
A
0 T T 3T T t
4 2 4
A
Figure 9.8
51
52. PHYSICS 025 CHAPTER 9
From the relationship between velocity and displacement,
v A2 x 2
thus the graph of velocity against displacement (v-x) is
shown in Figure 9.9.
v
A
A 0 A x
A
Figure 9.9
52
53. PHYSICS 025 CHAPTER 9
9.3.3 Graph of acceleration-time (a-t)
From the general equation of acceleration as a function of time
in SHM,
a A sin t
2
If = 0 , thus a A sin t
2
The acceleration-time graph is shown in Figure 9.10.
a
A 2
0 T T 3T T t
4 2 4
A 2
Figure 9.10
53
54. PHYSICS 025 CHAPTER 9
From the relationship between acceleration and displacement,
a 2 x
thus the graph of acceleration against displacement (a-x) is
shown in Figure 9.11. a
A 2
A 0 A x
A 2
Figure 9.11
The gradient of the a-x graph represents
gradient , m 2
54
55. PHYSICS 025 CHAPTER 9
9.3.4 Graph of energy-displacement (E-x)
From the equations of kinetic, potential and total energies as a
term of displacement
1
K m 2 A2 x 2
2
1 1
; U m x and E m 2 A2
2
2 2
2
thus the graph of energy against displacement (a-x) is shown
in Figure 9.12. E 1
E m 2 A2 constant
2
1
U m 2 x 2
2
K m 2 A2 x 2
1
Figure 9.12
2
x
55
56. PHYSICS 025 CHAPTER 9
The graph of Energy against time (E-t) is shown in Figure
9.13.
Energy
1
E m 2 A2
2
U m 2 A2 sin 2 t
1
2
K m 2 A2 cos 2 t
1
2
t
Figure 9.13 Simulation 9.6
56
57. PHYSICS 025 CHAPTER 9
Example 8 :
The displacement of an oscillating object as a function of time is
shown in Figure 9.14.
x(cm)
15.0
0 t (s)
0 .8
15.0
Figure 9.14
From the graph above, determine for these oscillations
a. the amplitude, the period and the frequency,
b. the angular frequency,
c. the equation of displacement as a function of time,
d. the equation of velocity and acceleration as a function of time.
57
58. PHYSICS 025 CHAPTER 9
Solution :
a. From the graph,
Amplitude, A 0.15 m
Period, T 0.8 s
1 1
Frequency,
f
T 0.8
f 1.25 Hz
b. The angular frequency of the oscillation is given by
2 2
T 0.8 1
2.5 rad s
c. From the graph, when t = 0, x = 0 thus 0
By applying the general equation of displacement in SHM
x A sin t x 0.15 sin 2.5t
where x is in metres and t is in seconds.
58
59. PHYSICS 025 CHAPTER 9
Solution :
d. i. The equation of velocity as a function of time is
0.15 sin 2.5t
dx d
v
dt dt
v 0.152.5 cos 2.5t
v 0.375 cos 2.5t
where v is in m s 1 and t is in seconds.
ii. and the equation of acceleration as a function of time is
0.375 cos 2.5t
dv d
a
dt dt
a 0.375 2.5 sin 2.5t
a 0.938 2 sin 2.5t
2
where a is in m s and t is in seconds.
59
60. PHYSICS 025 CHAPTER 9
Example 9 : a(m s 2 )
0.80
4.00 0 4.00 x(cm)
0.80
Figure 9.15
Figure 9.15 shows the relationship between the acceleration a and
its displacement x from a fixed point for a body of mass 2.50 kg at
which executes SHM. Determine
a. the amplitude,
b. the period,
c. the maximum speed of the body,
d. the total energy of the body. 60
61. PHYSICS 025 CHAPTER 9
Solution : m 2.50 kg
2
a. The amplitude of the motion is A 4.00 10 m
2
b. From the graph, the maximum acceleration is amax 0.80 m s
By using the equation of maximum acceleration, thus
2
amax A and
2
2
2
T
amax A
T
2 2
2
0.80 4.00 10
T 1.40 s T
OR The gradient of the a-x graph is
y2 y1 0 0.80
gradient 2
x2 x1 0 4.00 10 2
2
2
20 T 1.40 s
T 61
62. PHYSICS 025 CHAPTER 9
Solution : m 2.50 kg
c. By applying the equation of the maximum speed, thus
2
vmax A and
2 T
vmax A
T
2 2
vmax 4.00 10
1 1.40
vmax 0.180 m s
d. The total energy of the body is given by
1
E m 2 A2
2
2
2
E 2.50 4.00 10
1 2 2
2 1.40
E 4.03 102 J
62
63. PHYSICS 025 CHAPTER 9
Example 10 :
x(m)
0 .2
0 t (s )
1 2 3 4 5
0 .2
Figure 9.16
Figure 9.16 shows the displacement of an oscillating object of
mass 1.30 kg varying with time. The energy of the oscillating object
consists the kinetic and potential energies. Calculate
a. the angular frequency of the oscillation,
b. the sum of this two energy.
63
64. PHYSICS 025 CHAPTER 9
Solution : m 1.30 kg
From the graph,
Amplitude, A 0.2 m
Period, T 4 s
a. The angular frequency is given by
2 2
T 4
rad s 1
2
b. The sum of the kinetic and potential energies is
1
E m 2 A2
2
2
E 1.30 0.2
1 2
2 2
E 6.42 10 2 J
64
65. PHYSICS 025 CHAPTER 9
9.3.5 Phase difference,
Considering two SHM with the following equations,
x1 A1 sin 1t 1
x2 A2 sin 2t 2
is defined as phase 2 phase 1
2t 2 1t 1
For examples,
a. x
A x2 A cost
x2 OR
x2 A sin t
0 T T t 2
2 x1 x1 A sin t
A
65
66. PHYSICS 025 CHAPTER 9
Thus the phase difference is given by
Δ t t
2
Δ rad
If > 0 , hence
2
x2 leads the x1 by phase difference ½ rad
and constant with time.
b. x
A x2 A cost
OR
x2 A sin t
0 T T t 2
A
2 x1 x1 A sin t
x2 66
67. PHYSICS 025 CHAPTER 9
Thus the phase difference is given by
Δ t t
2
Δ rad
2
If < 0 , hence
x2 lags behind the x1 by phase difference
½ rad and constant with time.
c. x
A x2 A sin t
x2 OR
x2 A sin t
0 T t
x1 A sin t
T
A
2 x1
67
68. PHYSICS 025 CHAPTER 9
Thus the phase difference is given by
Δ t t
Δ rad
If = , hence
x2 is antiphase with the x1 and constant with
time.
d. x
A x2 A sin t
x1 A sin t
x2 The phase difference is
0
T T t Δ t t
2 x1 Δ 0
Simulation 9.7 A
If = 0 , hence
Simulation 9.8 x2 is in phase with the x1 and constant with
time.
68
69. PHYSICS 025 CHAPTER 9
Example 11 :
x(cm)
4
0 1 .0 2 .0 3 .0 t (s )
4
Figure 9.17
Figure 9.17 shows the variation of displacement, x with time, t for
an object in SHM.
a. Determine the amplitude, period and frequency of the motion.
b. Another SHM leads the SHM above by phase difference of
0.5 radian where the amplitude and period of both SHM are
the same. On the same axes, sketch the displacement, x against
time, t graph for both SHM.
69
70. PHYSICS 025 CHAPTER 9
Solution :
a. From the graph,
Amplitude, A 4 cm
Period, T 2.0 s
The frequency is given by
1 1
f
T 2.0
f 0.5 Hz
b. Equation for 1st SHM (from the graph):
x1 A sin t
x1 A sin 2ft
x1 4 sin t
2
70
71. PHYSICS 025 CHAPTER 9
Solution :
b. The 2nd SHM leads the 1st SHM by the phase difference of 0.5
radian thus Δ rad
2
Δ t t
2
t t rad
2 2
Equation for 2nd SHM : x2 4 sin t
x(cm)
4 x1
x2
0 3 .0
t (s )
1 .0 2 .0
4 71
72. Summary :
t x v a K U
PHYSICS 025 amax CHAPTER 9
1 2
0 A 0 A 2 0
max 2
kA
vmax
T 1
0 A 0 mA2 2 0
4 2
amax v A2 x 2
a 2 x T 1 2
max 1 2 A 0 A 2
0 kA
K mv 2 2
vmax 2
1 2 3T 1
U kx 0 A 0 2
mA2 2 0
2 4
amax 1 2
T A 0 A 2 0 kA
2
max
A O A 72
73. PHYSICS 025 CHAPTER 9
Learning outcome
9.4 Period of simple harmonic motion
Derive and use expression for
period of SHM, T for simple
pendulum and single spring
L
Simple pendulum T 2
g
Simple m
T 2
k
73
74. PHYSICS 025 CHAPTER 9
9.4.1 Terminology in SHM
Amplitude (A)
is defined as the maximum magnitude of the displacement
from the equilibrium position.
Its unit is metre (m).
Period (T)
is defined as the time taken for one cycle.
Its unit is second (s).
Equation :
1
T
f
Frequency (f)
is defined as the number of cycles in one second.
Its unit is hertz (Hz) :
1 Hz = 1 cycle s1 = 1 s1
Equation :
2f OR f
2 74
75. PHYSICS 025 CHAPTER 9
9.4.2 System of SHM
A. Simple pendulum oscillation
Figure 9.2 shows the oscillation of the simple pendulum of
length, L.
L
T
x m P
O sin
mg
Figure 9.2
mg cos
mg
75
76. PHYSICS 025 CHAPTER 9
A pendulum bob is pulled slightly to point P.
The string makes an angle, to the vertical and the arc length,
x as shown in Figure 9.2.
The forces act on the bob are mg, weight and T, the tension in
the string.
Resolve the weight into
the tangential component : mg sin
the radial component : mg cos
The resultant force in the radial direction provides the
centripetal force which enables the bob to move along the arc
and is given by mv2
T mg cos
r
The restoring force, Fs contributed by the tangential
component of the weight pulls the bob back to equilibrium
position. Thus
Fs mg sin
76
77. PHYSICS 025 CHAPTER 9
The negative sign shows that the restoring force, Fs is
always against the direction of increasing x.
For small angle, ;
sin in radian
arc length, x of the bob becomes straight line (shown in
Figure 9.3) then
x
sin
L
L
x
thus Fs mg
L
x
Figure 9.3
77
78. PHYSICS 025 CHAPTER 9
By applying Newton’s second law of motion,
F ma F s
mgx
ma
L
g
a x
L
Thus a x Simple pendulum executes
linear SHM
g
By comparing a x with a 2 x
L
g 2
Thus
2
and
L T
78
79. PHYSICS 025 CHAPTER 9
L
Therefore T 2 (9.2)
g
where T : period of the simple pendulum
L : length of the string
g : gravitatio nal accelerati on
The conditions for the simple pendulum executes SHM are
the angle, has to be small (less than 10).
the string has to be inelastic and light.
only the gravitational force and tension in the string acting
on the simple pendulum.
Simulation 9.1
79
80. PHYSICS 025 CHAPTER 9
B. Spring-mass oscillation
Vertical spring oscillation
F F1
x1
O
x
O
m a
m
mg
mg
Figure 9.4a Figure 9.4b Figure 9.4c
80
81. PHYSICS 025 CHAPTER 9
Figure 9.4a shows a free light spring with spring constant, k
hung vertically.
An object of mass, m is tied to the lower end of the spring as
shown in Figure 9.4b. When the object achieves an equilibrium
condition, the spring is stretched by an amount x1 . Thus
F 0 F W 0
kx1 W 0
W kx1
The object is then pulled downwards to a distance, x and
released as shown in Figure 9.4c. Hence
F ma
F1 W ma and F1 k x1 x
k x1 x kx1 ma
k
a x
m
then a x Vertical spring oscillation executes
linear SHM 81
82.
a
PHYSICS 025 CHAPTER Fs
9
m
Horizontal spring oscillation
Figure 9.5 shows a spring is t 0
initially stretched with a Fs 0
displacement, x = A and then m
released. T
t
According to Hooke’s law, a 4
Fs kx Fs
The mass accelerates toward m
T
equilibrium position, x = 0 by t
the restoring force, Fs hence Fs 0 2
Fs ma m
ma kx 3T
k
a t 4
a x Fs
Then
m m
a x executes
linear SHM t T
Figure 9.5 x A x0 x A82
83. PHYSICS 025 CHAPTER 9
k
By comparing a x with a x
2
m
k 2
Thus and
2
m T
where (9.3)
m T : period of the spring oscillatio n
Therefore T 2
k m : mass of the object
k : spring constant (force constant)
The conditions for the spring-mass system executes SHM are
The elastic limit of the spring is not exceeded when the
spring is being pulled.
The spring is light and obeys Hooke’s law.
No air resistance and surface friction.
Simulation 9.2
83
84. PHYSICS 025 CHAPTER 9
Example 1 :
A certain simple pendulum has a period on the Earth surface’s of
1.60 s. Determine the period of the simple pendulum on the
surface of Mars where its gravitational acceleration is 3.71 m s2.
(Given the gravitational acceleration on the Earth’s surface is
g = 9.81 m s2)
2 2
Solution : TE 1.60 s; g E 9.81 m s ; g M 3.71 m s
The period of simple pendulum on the Earth’s surface is
l
TE 2 (1)
gE
But its period on the surface of Mars is given by
l
TM 2 (2)
gM
84
85. PHYSICS 025 CHAPTER 9
Solution : TE 1.60 s; g E 9.81 m s 2 ; g M 3.71 m s 2
By dividing eqs. (1) and (2), thus
l
2
TE gE
TM l
2
gM
TE gM
TM gE
1.60 3.71
TM 9.81
TM 2.60 s
85
86. PHYSICS 025 CHAPTER 9
Example 2 :
A mass m at the end of a spring vibrates with a frequency of
0.88 Hz. When an additional mass of 1.25 kg is added to the mass
m, the frequency is 0.48 Hz. Calculate the value of m.
Solution : f1 0.88 Hz; f 2 0.48 Hz; Δm 1.25 kg
The frequency of the spring is given by
1 m
f1 and T1 2
T1 k
1 k
f1 (1)
2 m
After the additional mass is added to the m, the frequency of the
spring becomes
1 k
f2 (2)
2 m Δm
86
87. PHYSICS 025 CHAPTER 9
Solution : f1 0.88 Hz; f 2 0.48 Hz; Δm 1.25 kg
By dividing eqs. (1) and (2), thus
1 k
f1
2 m
f2 1 k
2 m Δm
f1 m Δm
f2 m
0.88 m 1.25
0.48 m
m 0.529 kg
87
88. PHYSICS CHAPTER 9
THE END…
Next Chapter…
CHAPTER 10 :
Mechanical waves
88