pengenalan autocad

1. EC202-COMPUTER AIDED DESIGN
(CAD)
1
LECTURER: WAN MOHAMAD KHAIRIL
CREDIT (S) : 1
DURATION : 30HRS @ 15 weeks
2 HRS PER WEEK

2. SYNOPSIS
2
 Computer Aided Design provides knowledge and
exposure on the usage of CAD software.
 The course focuses on the application of the
software to produce drawing on graphics,
electrical/electronic component symbol, circuit
schematics and electrical wiring layout diagram.
 The skill acquired from this course will also
equip the students with the ability to learn and
use other similar software.

3. COURSE LEARNING OUTCOMES (CLO)
3
Upon completion of this course students
should be able to:
1. Describe computer aided design concept, applications
and capabilities in electrical engineering environment. (C2)
2. Use skillfully the draw and edit commands and the various
data input techniques in generating simple and complex
technical drawings. (C3)
3. Draw and produce with precision the symbol graphics,
electronic circuits schematics and electrical wiring layout
diagrams faster and neat. (P3)

4. INTRODUCTION TO COMPUTER
AIDED DESIGN (CAD)
4

5. DEFINITION:
5
Computer-Aided Design (CAD), also
known as Computer-Aided Drafting, is
the use of computer software and systems
to design and create 2D and 3D virtual
models of goods and products for the
purposes of testing. It is also sometimes
referred to as computer assisted drafting.
Software

6. EXAMPLE OF 2d DRAWINGS
(MECHANICAL)
6

7. EXAMPLE OF 2d DRAWINGS
(MECHANICAL)
7

8. EXAMPLE OF 2D DRAWINGS
(MECHANICAL)
Edited by: azizahmohdyusuff/jke/puo 8

9. EXAMPLE OF 3D DRAWINGS (MECHANICAL)
9

10. EXAMPLE OF 3D DRAWINGS (MECHANICAL)
10

11. EXAMPLE OF 3D DRAWINGS (MECHANICAL)
11

12. EXAMPLE OF 2D DRAWINGS
(civil)
12

13. EXAMPLE OF 2D DRAWINGS
(civil)
13

14. EXAMPLE OF 2D DRAWINGS
(civil)
14

15. EXAMPLE OF 2D DRAWINGS
(civil)
15

16. EXAMPLE OF 3D DRAWINGS
(civil)
16

17. EXAMPLE OF 2D DRAWINGS
(ELECTRICAL)
17

18. EXAMPLE OF 2D DRAWINGS
(Electronic schematic)
18

19. EXAMPLE OF 3D DRAWINGS
(ELECTRICAL)
19

20. CAD SOFTWARE FOR EC202
JKE/PUO
AUTOCAD
VERSION 2004
20

21. Officical Name Comments
AutoCAD Version
21
1.0 – 2.6
DWG R2.6 file format introduced.
Last version to run without a math co-processor.
AutoCAD Version
9 - 12
DWG R11/R12 file format introduced. Last release
for Apple Macintosh
AutoCAD Version
13
DWG R13 file format introduced. Last release for
Unix, MS-DOS and Windows 3.11.
AutoCAD Version
14
DWG R14 file format introduced.
AutoCAD Version
2000,200oi, 2002
DWG 2000 file format introduced
AutoCAD Version
2004,2005, 2006
DWG 2004 file format introduced.
AutoCAD Version
2007 - 2012
DWG 2007 file format introduced.
AutoCAD Version
2013
DWG 20013 file format introduced.

22. Computer system requirements need to
run the CAD programs:
22
 Input devices: keyboard, mouse
 Processing unit: CPU
 Output devices: Printer / Plotter
AutoCAD recommends:
 800MHz Pentium III or better processor.
 At least 256MB of RAM, 1024 x 768 or higher display
resolution.
 300MB of available hard disk space
 Microsoft Internet Explorer 6.0 with Service Pack or
latest edition.

23. syllabus
Edited by: azizahmohdyusuff/jke/puo 23 Edited by: azizahmohdyusuff 23

24. Comparison
between CAD drawings to
manual/conventional drawings
24

25. COMPARISON
Manual DRAWINGS
CAD DRAWINGS
25

26. 26
 Increased productivity, efficiency and
accuracy
 Shorter time taken in creating, checking
and
editing.
 Improvement of output/product quality.
 Uniformity of reproductions
 Reduction in storage space.

27. assessment
Continuous assessment - 100%
Practical work (6) – 30%
End of chapter
problem(6) – 30%
Practical test (2) – 40%
27

28. The end of introduction to cad
28