Downloaded 244 times
Uploaded byAmran Aris
PENDIDIKAN SENI VISUAL
Dokumen ini membincangkan pendidikan seni visual yang bertujuan untuk mengembangkan minat dan keperibadian murid melalui pelbagai aktiviti seni. Definisi dan aspek seni visual dijelaskan serta prinsip-prinsip rekaan yang perlu diperhatikan. Kesimpulannya, pendidikan seni visual penting dalam melahirkan individu yang kreatif dan produktif.
More Related Content
Similar to PENDIDIKAN SENI VISUAL
PENDIDIKAN SENI VISUAL
- 1. NAMA PENSYARAH : ENCIKAMRAN BIN ARIS NAMA AHLI : TANSU CILLER BINTI YUSUF HANI FARIZAH BINTI JAPRI INSTITUT PENDIDIKAN GURU KAMPUS PEREMPUAN MELAYU, DURIAN DAUN, MELAKA Senidalam pendidikan Waj 3073 PISMP PENDIDIKAN KHAS AMBILAN JANUARI 2014
- 2.
- 3. PENGENALAN SENI VISUAL PendidikanSeni Visual di peringkat sekolah rendah bertujuan memberi peluang kepada murid memupuk minat, memperkembangkan keperibadian, memberi kesedaran dan kepekaan terhadap nilai-nilai kesenian dan alam sekitar serta kaitannya dengan mata pelajaran lain.
- 4. • Menurut Feldman(1996) seni visual merupakan usaha yang melibatkan pengajaran dan pembelajaran untuk membuat dan memahami seni, di samping mengetahui tentang dunia dan diri kita sendiri melalui seni. • Menurut Ensiklopedia Malaysia (1996:453) Seni visual ialah sesuatu yang indah pada pandangan pancaindera manusia sama ada melalui penglihatan atau pendengaran • Menurut Ibn. Khaldun, seni visual itu adalah kebenaran, keindahan dan kebaikan di mana di dalamnya terkandung ciri-ciri estetika dan logika . • Kesimpulannya, pendidikan seni visual dapat melahirkan insan yang harmonis, kritis, kreatif dan produktif menerusi pemupukan asas seni visual yang diterapkan di sekolah rendah dan sekolah menengah. DEFINISI SENI VISUAL
- 5. BIDANG-BIDANG DALAM SENIVISUAL
- 6. 1) melukis danmembuat gambar Lukisan Catan Kolaj Montaj Mozek Capan Gurisan Percikan Gosokan Cetakan BIDANG-BIDANG DALAM SENI VISUAL
- 7. 2) Membuat rekaandan corak Alam semulajadi Bahan buatan manusia Geometri Rupa barangan kraftangan tradisional BIDANG-BIDANG DALAM SENI VISUAL
- 8. 3) Membentuk danmembuat binaan Arca timbul Boneka Topeng Origami BIDANG-BIDANG DALAM SENI VISUAL
- 9. 4) Kraf tradisional Batik Anyaman Tembikar Ukiran Kelarai BIDANG-BIDANG DALAM SENI VISUAL
- 10. ESTETIKA DALAM PENDIDIKANSENI VISUAL
- 11. “Estetika ialah susunan bahagiandari sesuatu yang mengandungi pola. Pola mana mempersatukan bahagian-bahagian tersebut yang mengandungi keselarasan dari unsur-unsurnya, DEFINISI ESTETIKA (Effendy, 1993)
- 12. Bagaimana estetika ituboleh ditampilkan dalam karya? 1) Peniruan sebagai representasi gambar dan imej.
- 13. Bagaimana estetika ituboleh ditampilkan dalam karya? 2) Ekspresi dalam perasaan dan emosi. Pablo Picasso • Mengekpresikan lukisannya mengikut perasaan dan emosi • Contoh: kesedihan, kegembiraan dan lain-lain. • Kebolehan mengekspresikan perasaan dan emosi dapat menimbulkan nilai estetika kerana keselarasan mesej yang ingin disampaikan.
- 14.
- 15.
- 16.
- 17.
- 18. JALINAN SENTUH JALINANTAMPAK JALINAN
- 19. Rupa ialah hasildaripada pertemuan hujung garisan dengan permulaannya Pertemuan antara permulaan dan penghujung sesuatu garisan menghasilkan rupa Rupa boleh dihasilkan daripada garisan, warna dan jalinan. RUPA
- 20.
- 21.
- 22. RUPA POSITIF RUPANEGETIF Rupa positif ialah rupa sesuatu objek yang terletak di dalam satu kawasan tertentu Rupa negatif ialah ruang di sekeliling rupa objek tersebut.
- 23. RUPA DAN CORAK Rupadalam aktiviti mencorak, merupakan susunan rupa yang berulang-ulang dengan jarak dan kedudukan tertentu.
- 24. RUPA DAN LAMBANG Rupaboleh diolah menjadi lambang atau simbol kepada sesebuah syarikat, persatuan dan pertubuhan.
- 25. RUPA DAN MUKATAIP Muka taip ialah jenis- jenis rupa berbentuk huruf. Rupa muka taip boleh menghasilkan pelbagai gaya.
- 26. JENIS- JENIS SUSUNAN DALAM MENCOR AK . Susunan turun separa Susunanorgee Susunan batu- bata susunan selang-seli susunan cerminan Susunan sisik ikan
- 27. BENTUK Bentuk mempunyai strukturjisim dan isi padu. Ia mempunyai lebih daripada satu permukaan dan bersifat tiga dimensi (3D).
- 28. BENTUK KONKRIT Bentuk sebenaryang bersifat 3 dimensi dan dapat dirasa, disentuh dan dilihat daripada pelbagai sudut.
- 29. BENTUK ILUSI Bentuk objekyang dilihat dan dihasilkan melalui lukisan, catan, fotografi, cetakan atau pada permukaan rata (bersifat dua dimensi)
- 30. R U AN G Ruang adalah kawasan kosong di sekeliling sesuatu objek, jarak di antara dua objek dan di dalam sesuatu objek.
- 31.
- 32. HARMONI Dalam istilah seniharmoni merupakan hasil ulangan dan rentak unsur seni yang sesuai dan seimbang Harmoni wujud dalam penggunaan garisan dan warna Harmoni tidak akan wujud jika ada unsur-unsur yang bercanggah
- 34. PENEGASAN Kontra wujud jikaada unsur-unsur seni yang bertentangan atau bercanggah dalam sesuatu gubahan
- 35. Imbangan simetri - garisan‘axis’ Imbangan bermaksud kesamaan dan kesepadanan dari segi berat, tarikan dan tumpuan. IMBANGAN
- 36. Imbangan tidak simetri –unsur seni tidak sama di kedua-dua bahagian tetapi mempunyai ciri-ciri yang menimbulkan kesan keseimbangan
- 37. KONTRA Fungsi: menarik perhatian, memberi fokus,dan mengelakkan kebosanan Penggunaan unsur seni yang kontra atau asingkan objek yang hendak ditegaskan.
- 38. PERGERAKAN Fungsi irama danpergerakan ialah untuk memberi kesan lebih hidup dan realistik terhadap sesuatu gubahan
- 39. KESATUAN Kesatuan bermaksud satutema atau satu idea bagi semua unsur dalam sesuatu gubahan Kesatuan dapat menimbulkan suasana yang tenteram, teratur dan selesa
- 40. KEpelbagaian Kepelbagaian wujud hasil penggunaanpelbagai gaya, nilai, dan idea yang berbeza dalam sesuatu gubahan
- 41.
- 42. 1 • Menggambar 2 •Membuat rekaan dan corak 3 4 AKTIVITI SENI VISUAL • Membentuk dan membuat binaan • Kraf tradisional
- 43.
- 44. AKTIVITI TIUPAN (CORAKTIDAK TERANCANG) 2) MEMBUAT REKAAN DAN CORAK
- 45. AKTIVITI KALIGRAFI (CORAKTERANCANG) 2) MEMBUAT REKAAN DAN CORAK
- 46. AKTIVITI ORIGAMI 3) MEMBENTUKDAN MEMBUAT BINAAN
- 47. AKTIVITI ANYAMAN 4) KRAFTRADISIONAL
- 48.
Editor's Notes
- #3 Day Dreaming Video Template (Intermediate) To reproduce the effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Images group, click Picture, and then in the left pane of the Insert Picture dialog box, click the drive or library that contains the picture. In the right pane of the dialog box, click the picture (classroom) and then click Insert. With the image selected, under Picture Tools, on the Format tab, in the Picture Styles group, click the arrow at the bottom right to launch the Format Picture dialog box. In the Format Picture dialog box, select Size in the left pane, under Size and Rotate in the right pane set Height to 7.5” and Width to 10”. Close the Format Picture dialog box. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Center. Click Align Middle. On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, click Rectangle (first option from the left). On the slide drag to draw a rectangle. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow at the bottom right to launch the Format Shape dialog box. In the Format Shape dialog box, select Size in the left pane, under Size and Rotate in the right pane set Height to 5.5” and Width to 10”. In the Format Shape dialog box, select Fill in the left pane, under Fill in the right pane select Gradient Fill. Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Customize the gradient stops as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left). Select the last stop on the list, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left). In the Transparency box, enter 100%. Close the Format Shape dialog box. With the rectangle selected, on the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Center. Click Align Top. To reproduce the video effects on this slide, do the following: For the middle video, on the Insert tab, in the Media group, click Video, and then click Video from File. In the left pane of the Insert Video dialog box, click the drive or library that contains the video. In the right pane of the dialog box, click the video that you want and then click Insert. Select the video. Under Video Tools, on the Format tab, in the Video Styles group, click the arrow to the right of Video Shape, under Callouts select Cloud Callout (first row, fourth option from left). Under Video Tools, on the Format tab, in the Video Styles group click the arrow in the bottom right corner to launch the Format Video dialog box. In the Format Video dialog, click Border Color in the left pane, under Border Color in the right pane, click Gradient Line. Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear on the slider. Customize the gradient stops as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors select Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). Select the second stop on the list, and then do the following: In the Position box, enter 50%. Click the button next to Color, and then under Theme Colors select Blue Accent 1, Lighter 60% (third row, fifth option from the left). Select the last stop on the list, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors select White Background 1 (first row, first option from the left). Also in the Format Video dialog, click Border Style in the left pane, under Border Style in the right pane, set Width to 1.25 pt. Then in the Format Video dialog, click Shadow in the left pane, under Shadow in the right pane, click the arrow next to Presets and select Offset Diagonal Bottom Right (under Outer, first row, first option from left). Then set the Blur to 15 pt. In the Format Video dialog box, click Size in the left pane, under Size and Rotate in the right pane set Height to 2.24”, Width to 4.01”, and Rotation to 3°. In the Format Video dialog, click Position in the left pane, under Position on Slide in the right pane, set Horizontal to 2.85” and Vertical to 1.02”. Close the Format Video dialog box. Select the video, click and drag the Yellow Adjustment Handle to boy’s head in middle of picture. With the video still selected, on the Animations tab, in the Animation group, select Play. Also on the Animations tab, in the Timing group, click the arrow to the right of Start and select With Previous. On the Animations tab, in the Advanced Animation group, click Add Animation, select Wipe. Also on the Animations tab, in the Timing group, click the arrow to the right of Start, select With Previous, and set Duration to 01.00 seconds. For the left video, on the Insert tab, in the Media group, click Video, and then click Video from file. In the left pane of the Insert Video dialog box, click the drive or library that contains the video. In the right pane of the dialog box, click the video that you want and then click Insert. Under Video Tools, on the Format tab, in the Video Styles group, click the arrow to the right of Video Shape, under Callouts, select Cloud Callout (first row, fourth option from left). Under Video Tools, on the Format tab, in the Video Styles group, click the arrow in the bottom right corner to launch the Format Video dialog box. In the Format Video dialog, click Border Color in the left pane, under Border Color in the right pane click Gradient Line. Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear on the slider. Customize the gradient stops as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors select Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). Select the second stop on the list, and then do the following: In the Position box, enter 50%. Click the button next to Color, and then under Theme Colors select Blue Accent 1, Lighter 60% (third row, fifth option from the left). Select the last stop on the list, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors select White Background 1 (first row, first option from the left). Also in the Format Video dialog, click Border Style in the left pane, under Border Style in the right pane, set Width to 1.25 pt. Then in the Format Video dialog, click Shadow in the left pane, under Shadow in the right pane, click the arrow next to Presets and select Offset Diagonal Bottom Right (under Outer, first row, first option from left). Then set the Blur to 15 pt. In the Format Video dialog box, click Size in the left pane, under Size and Rotate in the right pane set Height to 2.16” Width to 3.96”. In the Format Video dialog, click Position in the left pane, under Position on Slide in the right pane, set Horizontal to 0.03” and Vertical to 0.2”. Close the Format Video dialog box. Select the video, click and drag the Yellow Adjustment Handle to child’s head on left of picture. On the Animations tab, in the Animation group, select Play. Also on the Animations tab, in the Timing group, click the arrow to the right of Start and select With Previous. On the Animations tab, in the Advanced Animation group, click Add Animation, select Wipe. Also on the Animations tab, in the Timing group, click the arrow to the right of Start and select With Previous and set Duration to 01.00 seconds. For the right video, on the Insert tab, in the Media group, click Video, and then click Video from file. In the left pane of the Insert Video dialog box, click the drive or library that contains the video. In the right pane of the dialog box, click the video that you want and then click Insert. Under Video Tools, on the Format tab, in the Video Styles group, click the arrow to the right of Video Shape, under Callouts, select Cloud Callout (first row, fourth option from left). Under Video Tools, on the Format tab, in the Video Styles group click the arrow in the bottom right corner to launch the Format Video dialog box. In the Format Video dialog, click Border Color in the left pane, under Border Color in the right pane click Gradient Line. Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear on the slider. Customize the gradient stops as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors select Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). Select the second stop on the list, and then do the following: In the Position box, enter 50%. Click the button next to Color, and then under Theme Colors select Blue Accent 1, Lighter 60% (third row, fifth option from the left). Select the last stop on the list, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors select White Background 1 (first row, first option from the left). Also in the Format Video dialog, click Border Style in the left pane, under Border Style in the right pane, set Width to 1.25 pt. Then in the Format Video dialog, click Shadow in the left pane, under Shadow in the right pane, click the arrow next to Presets and select Offset Diagonal Bottom Right (under Outer, first row, first option from left). Then set the Blur to 15 pt. In the Format Video dialog box, click Size in the left pane, under Size and Rotate in the right pane set Height to 2.49” and Width to 4.00”. In the Format Video dialog, click Position in the left pane, under Position on Slide in the right pane, set Horizontal to 6.00” and Vertical to 0.07”. Close the Format Video dialog box. Select the video, click and drag the Yellow Adjustment Handle to child’s head on right of picture. On the Animations tab, in the Animation group, select Play. Also on the Animations tab, in the Timing group, click the arrow to the right of Start and select With Previous. On the Animations tab, in the Advanced Animation group, click Add Animation, select Wipe. Also on the Animations tab, in the Timing group, click the arrow to the right of Start, select With Previous, and set Duration to 01.00 seconds.
- #15 Animated 3-D bouncing ball (Intermediate) Tip: Some shape effects on this slide are created with the Combine Shapes commands. To access this command, you must add it to the Quick Access Toolbar, located above the File tab. To customize the Quick Access Toolbar, do the following: Click the arrow next to the Quick Access Toolbar, and then under Customize Quick Access Toolbar click More Commands. In the PowerPoint Options dialog box, in the Choose commands from list, select All Commands. In the list of commands, click Combine Shapes, and then click Add. To reproduce the square shape on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first row). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 3.67” into the Height box and 3.67” into the Width box. Also on the Format tab, in the Shape Styles group, click Shape Fill, and then under Theme Colors, click Black, Text, Lighter 50%. Also on the Format tab, in the Shape Styles group, click Shape Outline, and then click No Outline. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row). On the slide, drag to draw an oval. Select the oval. Under Drawing Tools, on the Format tab, in the Size group, enter 2.85” in the Height box and 2.85” in the Width box. Press and hold CTRL, and select the rectangle and the oval. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. Press and hold CTRL, select the square, and then select the circle. On the Quick Access Toolbar, click Combine Shapes, and then click Shape Subtract. Select the freeform shape. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. Also on the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle. On the slide, drag to draw a rectangle. Select the new rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 1.84” in the Height box and 3.67” in the Width box. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. Press and hold CTRL, select one freeform shape, and then select the rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Selected Objects. Click Align Center. Click Align Bottom. On the Quick Access Toolbar, click Combine Shapes, and then click Shape Subtract. Press and hold CTRL, select the second freeform shape, and then select the second rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Selected Objects. Click Align Center. Click Align Top. On the Quick Access Toolbar, click Combine Shapes, and then click Shape Subtract. Position the new shape so that the top edge touches the bottom edge of the other shape. Press and hold CTRL, select the two freeform shapes. On the Home tab, in the Drawing group, click Arrange, point to Align, and then click Align Center. Also on the Home tab, in the Drawing group, click Arrange, and then click Group. Select the group. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click 3-D Rotation in the left pane, and in the 3-D Rotation pane, in the Presets list, under , under Parallel, click Off Axis 2 Top. Also in the Format Shape dialog box, click 3-D Format in the left pane, and then in the 3-D Format pane, do the following: Under Depth, in the Depth box, enter 17.5 pt. Under Surface, click the button next to Material, and then under Special Effect click Dark Edge. Select the group. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup. Select the bottom half of the square. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Position in the left pane, and in the Position pane, under Position on slide, do the following: In the Horizontal list, enter 2.93”. Next to Horizontal, in the From list, select Top Left Corner. In the Vertical list, enter 4.01”. Next to Vertical, in the From list, select Top Left Corner. Select the top half of the square. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Position in the left pane, and in the Position pane, under Position on slide, do the following: In the Horizontal list, enter 3.72”. Next to Horizontal, in the From list, select Top Left Corner. In the Vertical list, enter 3.51”. Next to Vertical, in the From list, select Top Left Corner. To reproduce the circle effect on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row). On the slide, drag to draw a shape. Select the oval. Under Drawing Tools, on the Format tab, in the Size group, enter 2” in the Height box and 2” in the Width box. Also on the Format tab, in the Shape Styles group, click Shape Outline, and then click No Outline. Also on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following: In the Type list, click Radial. In the Direction list, click From Center. Under Gradient stops, click Add gradient stops and Remove gradient stops, until four stops appear in the slider. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select the next stop in the slider, and then do the following: In the Position box, enter 32%. Click the button next to Color, and then under Theme Colors click Orange, Accent 6 (first row). Select the next stop in the slider, and then do the following: In the Position box, enter 85%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 111, Green: 53, and Blue: 5. Select the final stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click Orange, Accent 6, Darker 50% (sixth row). Select the bottom half of the square. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front. To reproduce the animation effects on this slide, do the following: Select the oval. Position the oval off the top edge of the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, under Motion Paths, click Lines. Press and hold SHIFT, and select the red end point of the motion path. Drag the end point of the motion path to the center of the square shape. Also on the Animations tab, in the Timing group, do the following: In the Start list, select After Previous. In the Duration box, enter 02.50. Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the arrow next to the motion path animation, and then click Effect Options. In the Down dialog box, on the Effect tab, under Settings, do the following: In the Smooth start box, enter 0.25. In the Smooth end box, enter 0.00. In the Bounce end box, enter 2.00 To reproduce the background effects on this slide, do the following: On the Design tab, in the Background group, click Background Styles, and then click Style 9 (third row).
- #20 Animated rectangles curve up and grow in sequence (Intermediate) To reproduce a rectangle on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rounded Diagonal Corner Rectangle (ninth option from the left). On the slide, drag to draw a rounded rectangle. Drag the yellow diamond adjustment handle to the left to reduce the size of the corner radius. Select the rounded rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 2.33”. In the Shape Width box, enter 2.32”. On the Home tab, in the Drawing group, click the arrow next to Shape Fill, and select No Fill. On the Home tab, in the Drawing group, click Shape Effects, point to Reflection, under Reflection Variations, select Tight Reflection, touching (first row, first option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, in the left pane click Line Color, and then in the Line Color pane select Solid Line. In the Color list, select More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 137, Green: 227, Blue: 231. Also in the Format Shape dialog box, in the left pane, click Line Style. In the Line Style pane, in the Width text box, enter 10 pt, and in the Cap type list, select Round. Also in the Format Shape dialog box, in the left pane, click 3-D Format. In the 3-D Format pane, do the following: Under Bevel, do the following: In the Top list, under Bevel, select Circle (first row, first option from the left). In Top, under Width, enter 10 pt. In Top, under Height, enter 10 pt. Under Contour, click the button next to Color, and then under Theme Colors select Olive Green, Accent 3, Lighter 60% (third row, seventh option from the left). Under Surface, do the following: In the Material list, under Standard, select Matte (first row, first option from the left). In the Lighting list, under Neutral, select Soft (first row, third option from the left). In the Angle box, enter 315°. Right-click the rounded rectangle and select Edit Text. Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Gills Sans MT Condensed from the Font list, and select 28 from the Font Size list. On the Home tab, in the Paragraph group, click Center to center the text. To reproduce the animation effect on this slide, do the following: On the Animations tab, in the Animation group, click the More arrow to expand the effects gallery, and then click More Entrance Effects. In the Change Entrance Effect dialog box, under Exciting, click Curve Up. In the Timing group, do the following: In the Start list, select With Previous. In the Duration list, select 00.50. In the Advanced Animation group, click Add Animation, and under Emphasis, click Grow/Shrink. In the Advanced Animations group, click Animation Pane. In the Animation Pane, click the arrow at the side of the second (grow/shrink) effect and then click Effect Options. In the Grow/Shrink dialog box, on the Timing tab, do the following: In the Start list, select With Previous. In the Duration list, select 0.5 seconds (Very Fast). On the Effects tab, do the following: Click the arrow next to Size, select Custom, enter 5 and then press ENTER. Click the arrow next to Size, select Vertical. Select the Auto-reverse check box. Click OK. To reproduce a second and third rectangle and the animation, do the following: On the slide, select the rounded rectangle. On the Home tab, in the Clipboard group, click the arrow at Copy, and select Duplicate. Position the second rounded rectangle next to the first rounded rectangle. Repeat until there are three rectangles. In the Animation Pane, in the animation list, press and hold CTRL and select the Curve Up entrance effect and Grow/Shrink emphasis effect for the second rectangle (third and fourth effects in the list). On the Animations tab, in the Timing group, in the Delay text box, enter 0.5. In the Animation Pane, in the animation list, press and hold CTRL and select the Curve Up entrance effect and Grow/Shrink emphasis effect for the third rectangle (fifth and sixth in the list). Click the arrow next to the effect, select Effect Options, and then in the dialog box, on the Timing tab, in the Delay text box, enter 1.0. Click the text in each rectangle to change, add or remove it. To reproduce the background on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, select Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height text box enter 1.62”. In the Shape Width text box enter 10”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, in the left pane, click Fill, and in the Fill pane, do the following: Select Solid fill. Click the button next to Color, select More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 137, Green: 227, Blue: 231. Under Transparency, use the slider or box to enter 70%. Also in the Format Shape dialog box, in the left pane, click Line Color, and in the Line Color pane, select No line. Position the rectangle on the middle of the slide. On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, select Round Diagonal Corner Rectangle (ninth option from the left). On the slide, drag to draw a rectangle Select the round diagonal corner rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Shape Height text box enter 0.44” and in the Shape Width text box enter 0.44”. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, in the left pane, click Fill, and in the Fill pane, do the following: Select Solid fill. Click the button next to Color, under Theme Colors, select White, Background 1, Darker 15% (third row, first option from the left). In the Transparency, box enter 60%. Also in the Format Shape dialog box, in the left pane, click Line Color, and in the Line Color pane, select No line. Select the round diagonal corner rectangle. On the Home tab, in the Clipboard group, click the arrow at Copy, and select Duplicate. Repeat this process until you have a total of seven round diagonal corner rectangles. On the slide, press and hold CTRL and select the seven round diagonal corner rectangles. On the Home tab, in the Drawing group, click Arrange, and then under Position Objects, point to Align, and do the following: Click Align Selected Objects. Click Align Top. Click Distribute Horizontally. Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Diagonal – Bottom Right to Top Left (second row, third option from the left). Under Gradient stops, click Add or Remove until two stops appear on the slider, and customize the gradient stops as follows: Select Stop 1 on the slider, and then do the following: In the Position box, enter 50%. Click the button next to Color, and click White, Background 1 (first row, first option from the left). Select Stop 2 on the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and click More Colors. In the Colors dialog box, on the Custom tab, enter values for Red: 204, Green: 244, Blue: 248.