PCBA Assembly Process Flow / PCB Assembly Manufacturing introduces the basic manufacturing process of PCBA / PCB assembly in different condition of component.It is about PCBA manufacture production.
This presentation is all about the working of Surface mount technology department of electronics industry. This is my personal experience at iljin electronics pvt. ltd. during my internship.
This presentation is all about the working of Surface mount technology department of electronics industry. This is my personal experience at iljin electronics pvt. ltd. during my internship.
Introduction to Surface Mount TechnologyABDUL MUNAFF
Surface Mount Technology (SMT) refers to a specific type of electronics assembly where electronic components are attached to the surface of a substrate (typically a printed circuit board).
SMT is a modern alternative to traditional thru-hole technology where components are attached to substrates by leads that passed through holes in the PCB.
Surface Mount components require less space so SMT is helpful in product miniaturization.
SMT Overview
SMT V/S THROUGH HOLE
Basic SMT process flow
Equipments used SMT Assembly
Through Hole Assembly & Soldering
ELECTROSTATIC DISCHARGE
RoHS
We provide totally solution for LED lighting SMT PCB assembly.
Worldwide Installation and on site support.
Factory (machine and lighting assembly) training.
Project Report on SMT and through-hole technologylakshya bhardwaj
SMT and Through-hole technology and their assembly line, different types of Soldering, ESD protection, Conformal coating, etc, all about PCB Production
In Plant training (internship) at Schneider ElectricSujith Js
In Plant Training at Schneider Electric in the department of Manufacturing Technology.
At Jigani, Bangalore.
• Topic: Study and Analysis of manufacturing of PCB.
This training is very necessary to them who are working in Electronics manufacturing because Soldering process is the Heart of Electronics Industry, that's why this training is very important to employees.
This slide deck takes you through important elements of manula PCB inspection including some definitions, what makes a good inspector , what type of lighting is required to be able to see the important aspects of a PCB and the types of inspection aids. The slide deck ends with some real examples where the user is challenged to make a determination of defect/process indicator/acceptable of an electronics assembly in accordance with the IPC-A-610 and IPC-A-620 standards.
Sorry to say but the college spelling is wrong actually "technology" word is missing. Its by mistake.
A presentation on printed circuit board designing. A brief discussion on pcb fabrication. Basic steps involved in it.
This webinar goes over the major changes of the new ISO 13485:2016 standard, including the upgrade process. Program Manager Rick Burgess presented and responded to questions live on the webinar.
Steps to Compliance with the European Medical Device RegulationsApril Bright
The trilogue negotiations for the European Medical Device Regulations are expected to conclude by June. Whether or not the long-awaited regulations receive another postponement, orthopaedic manufacturers cannot put off preparation or they risk their ability to sell products in Europe. Dr. Tariah will walk attendees through the greatest pain points for orthopaedic manufacturers when complying with the new regulations.
Introduction to Surface Mount TechnologyABDUL MUNAFF
Surface Mount Technology (SMT) refers to a specific type of electronics assembly where electronic components are attached to the surface of a substrate (typically a printed circuit board).
SMT is a modern alternative to traditional thru-hole technology where components are attached to substrates by leads that passed through holes in the PCB.
Surface Mount components require less space so SMT is helpful in product miniaturization.
SMT Overview
SMT V/S THROUGH HOLE
Basic SMT process flow
Equipments used SMT Assembly
Through Hole Assembly & Soldering
ELECTROSTATIC DISCHARGE
RoHS
We provide totally solution for LED lighting SMT PCB assembly.
Worldwide Installation and on site support.
Factory (machine and lighting assembly) training.
Project Report on SMT and through-hole technologylakshya bhardwaj
SMT and Through-hole technology and their assembly line, different types of Soldering, ESD protection, Conformal coating, etc, all about PCB Production
In Plant training (internship) at Schneider ElectricSujith Js
In Plant Training at Schneider Electric in the department of Manufacturing Technology.
At Jigani, Bangalore.
• Topic: Study and Analysis of manufacturing of PCB.
This training is very necessary to them who are working in Electronics manufacturing because Soldering process is the Heart of Electronics Industry, that's why this training is very important to employees.
This slide deck takes you through important elements of manula PCB inspection including some definitions, what makes a good inspector , what type of lighting is required to be able to see the important aspects of a PCB and the types of inspection aids. The slide deck ends with some real examples where the user is challenged to make a determination of defect/process indicator/acceptable of an electronics assembly in accordance with the IPC-A-610 and IPC-A-620 standards.
Sorry to say but the college spelling is wrong actually "technology" word is missing. Its by mistake.
A presentation on printed circuit board designing. A brief discussion on pcb fabrication. Basic steps involved in it.
This webinar goes over the major changes of the new ISO 13485:2016 standard, including the upgrade process. Program Manager Rick Burgess presented and responded to questions live on the webinar.
Steps to Compliance with the European Medical Device RegulationsApril Bright
The trilogue negotiations for the European Medical Device Regulations are expected to conclude by June. Whether or not the long-awaited regulations receive another postponement, orthopaedic manufacturers cannot put off preparation or they risk their ability to sell products in Europe. Dr. Tariah will walk attendees through the greatest pain points for orthopaedic manufacturers when complying with the new regulations.
Orthopaedic Device Industry Business Models: 2020 and BeyondApril Bright
During last year’s closing keynote, Dr. Wael Barsoum underscored the importance of producing transformational, innovative products to stay competitive and maintain a strong company and a healthy supply chain. This year, Dr. Bill Tribe will shine the “innovation lens” on the value of transforming your business.
Dr. Tribe co-authored the often-cited “Medical Devices: Equipped for the Future?” study in which the orthopaedics sector is called out specifically as facing an extreme combination of forces — none of which come as a surprise or are new, but when viewed holistically (as in the image below), paint a rather obvious picture of the need for companies to respond. As you can see, orthopaedics is the only sector with 4 of 5 “hot” areas…and in this case, the odd one out (regulatory scrutiny) is still marked “critical.”
From a top-down view, the five “disruptors” listed above are acute (power shift to payors, regulatory scrutiny, unclear sources of innovation, new healthcare delivery models, need to serve lower socio-economic classes). They impact the overall orthopaedic industry intensely – but how are they impacting you? Dr. Tribe’s Keynote Address will take into account the uniqueness of the OMTEC audience: large and small OEMs, Suppliers and Service Providers.
As stated in the A.T. Kearney study, “Each company faces a different set of headwinds…while the macro-factors held true, individual experiences and prioritization depended on factors such as market geography, product life cycles and go-to-market strategies. The most effective strategies are therefore likely to be company specific.”
What will be your business model in 2020? 2025?
Will you be considering cost-structure, deployment of inventory, commercial logistics, quality and regulatory frameworks, R&D, innovation and data collection?
Dr. Tribe will break down the issues and share potential approaches to help you navigate toward a more relevant and lucrative business model – regardless of where you are in the process.
Our PCB 101 Presentation goes through the processes involved in manufacturing a printed circuit board.
From a simple single sided board to a complex multi-layer, double sided surface mount design, our goal is to provide you a design that meets your requirements and is the most cost effective to manufacture. Our experience in IPC Class III standards, very stringent cleanliness requirements, heavy copper and production tolerances allow us to provide our customers exactly what they need for their end product.
Strategies for Device Approval in China, India, South Korea and AustraliaApril Bright
This session will describe the orthopaedic device regulatory and registration requirements in Asia Pacific markets. Regulatory steps and strategies will be presented for each of these countries. The discussion will also cover ways to gain regulatory information about competitors already selling in these markets. Attendees will leave the session with an understanding of timelines, costs and complexity for approval.
Design for Manufacturability Rapid Fire April Bright
Design for manufacturability (DFM) is a broadly-implemented step in today’s development process to ensure that a designed product can actually be manufactured. While the concept sounds simple, there are nuances to every supplier relationship and every new process.
Three suppliers—a contract manufacturer, additive manufacturer and plastics company—will each spend 15 minutes answering the following question: With orthopaedic customers, our greatest DFM pain point is ___ and the best strategy to change that is ___.
OEMs will learn best practices and ways to approach DFM with their supplier partners.
Significant changes are underway that impact the quality and regulatory systems of medical device companies and their suppliers. ISO 13485:2016 adds new requirements to address risk management and to better align the standard with global regulatory requirements (FDA, MDD, JPAL, etc.). With the release of ISO 9001:2015, the ISO 9001 and ISO 13485 standards are no longer integrated. A new single audit MDSAP program will be in effect beginning 2017 that incorporates applicable FDA, Canadian, Brazilian, Australian and Japanese quality system requirements into the annual ISO 13485 audit cycle. The presentation will provide an overview of these changes and the steps required to incorporate these changes into existing quality management systems.
Predicting an instrument's performance over time is essential to the design phase. This session will cover reliability testing and performance deterioration, including recommendations for tests that should be performed to ensure that an instrument will function through a lifetime of use, and ways to collect measurable outputs of the instrument from initial use to the end of its lifecycle.
Design controls are not an easy subject to address during and after the design of medical devices and manufacturing processes. Design controls should drive the device design process, not be an afterthought. This session focuses on treating design as a separate entity within the quality management system, user needs vs. design inputs, continuation of design controls after the transfer process, design review and more.
CAPA: Using Risk-Based Decision-Making Toward ClosureApril Bright
Implementing a risk‐based CAPA process within a QMS is a necessity in the improvement of controls aligned with product and process non-conformances, adverse events, audit findings, complaints, etc. Making decisions concerning scope and extent about these “defectives” is a modern and cost-saving approach to improvement and compliance. Every non-conformity does not force you to open a corrective action. While almost every problematic issue needs at least a correction, the biggest payback is to use corrective actions on systemically-driven problems that are repetitive and recurring.
Applying the methods of determining risk to the device’s complete life cycle will give your company a complete look at all of the device’s risks—including those relative to processes. Manufacturers should be able to justify that they have reduced the risks as far as possible as part of their risk management plan and ongoing corrective and preventive actions.
Understanding the New ISO 13485:2016 RevisionGreenlight Guru
he much anticipated revision to ISO 13485, the global medical device quality management system (QMS) standard, was released late last month (Feb, 2016).
The new ISO 13485:2016 ushers in a whole new wave of changes and requirements medical device manufacturers must adhere to, which we covered on our previous webinar here (http://www.greenlight.guru/webinar/iso-13485-2016-changes).
ISO tells us that there will be a three year transition period after which the guidance says, “any existing certification issued to ISO 13485:2003 will not be valid.”
The time to start planning your organization's transition to ISO 13485:2016 is now. Or face playing expensive catch up later.
(You can view the full webinar here: http://www.greenlight.guru/webinar/iso-13485-2016-transition-planning)
In this webinar, you'll learn specifically:
What your organization needs to be doing to prepare for the transition to ISO 13485:2016
Why the transition presents an opportunity for your organization to implement better processes
An overview of the specific changes coming with ISO 13485:2016
The actions you should be taking now and how to plan for the implementation of the standard
Understanding the welding process and troubleshooting.sourbhk6
This Tutorial will help newbee to understand the welding process and its trouble which are easy to sort out during the production. Just follow the tutorial and boost your knowledge to understand the welding process.
Application of sheet metal processing technology in cnc punching machine -dgm...JasmineHL
Sheet metal processing technology is an important process for sheet metal product forming, mainly including laser cutting, heavy processing, bending forming, precision welding, and other process methods. CNC punching machine is a very common basic equipment in sheet metal processing. The practical application of CNC punching in metalworking technology is briefly discussed and analyzed.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
How world-class product teams are winning in the AI era by CEO and Founder, P...
PCBA Assembly Process Flow / PCB Assembly Manufacturing
1. PCBA assembly process flow
Single Side Surface Mounting
Single sided plug-in mounting
Double sided surface mounting
Single sided mix assembly
Double sided mix assembly
@2013 Agile Circuit Co., Ltd All Right Reserved ||www.agipcb.com
Internal usage only
2. Single Side Surface Mounting
Solder printing
SMD parts
Reflow soldering
Solder paste——Reflow Soldering
Simple
Fast
Easy
Single sided plug-in mounting
Forming
THT parts
Wave soldering
Wave soldering
Simple Fast Easy
Forming is the most inefficient
work in the wave soldering ,
and it may cause electrostatic
damage and increase mistake
probability, also may delay the
delivery time the same time.
@2013 Agile Circuit Co., Ltd All Right Reserved ||www.agipcb.com
Internal usage only
3. Double sided surface mounting
B side
Solder paste printing
SMD parts
Reflow soldering
Flipping
A side
Solder paste printing
SMD parts
Reflow soldering
flipping
To make full use of PCB space, smaller the mounting area and improve efficiency,
A side usually is layout with big IC components and B side mainly chip
components.
@2013 Agile Circuit Co., Ltd All Right Reserved ||www.agipcb.com
3
Internal usage only
4. Single sided mix assembly
Solder paste printing
Surface mounted parts
Reflow soldering
THT components
Wave soldering
PCBA assembly with second heating, higher efficiency
Remark: If THT components quantity is small, could use reflow soldering and hand welding.
@2013 Agile Circuit Co., Ltd All Right Reserved ||www.agipcb.com
Internal usage only
5. One side SMT, the other THT
Glue process with
low pass, Not
recommended
surface mount adhesives SMD parts
Solidification
Flipping
THT
Wave soldering
PCBA assembly with second heating, higher efficiency
Remark: If THT components quantity is small, could use reflow soldering and hand welding .
Solder paste sprinting
Surface mounted parts
Reflow soldering
Hand welding
@2013 Agile Circuit Co., Ltd All Right Reserved ||www.agipcb.com
Internal usage only
6. Double sided mixed assembly ( 1 )
Solder paste printing
SMT adhesive
SMD
Reflow soldering
parts
SMD parts
Flipping
Heating to solid
Flipping
THT parts
PCBA assembly heating three times,
low efficiency
Wave soldering
@2013 Agile Circuit Co., Ltd All Right Reserved ||www.agipcb.com
Internal usage only
7. Double sided mixed assembly(2)
B side
Solder paste printing
SMD Parts
Reflow soldering
Flipping
A side
Solder paste printing
SMD parts
Reflow soldering
Manual welding
Wave soldering(mould)
Manual welding is suitable for both side components are many and SMD part lot , but THT
component is little ; If THT component is many , Wave soldering(mould) is suggested.
@2013 Agile Circuit Co., Ltd All Right Reserved ||www.agipcb.com
Internal usage only
8. Contact Agile Circuit Co., Ltd
Chris Chow
Director of Sales and Marketing
Agile Circuit Co., Ltd
0316# East Tower of Shiji Square, the First Nanyou Industrial Park, Nan
Shan Dist,518054 China
Phone: 85-755-86050627
Email: sales@agipcb.com
To know more about PCB manufacture and assembly, visit us at
http://www.agipcb.com
@2013 Agile Circuit Co., Ltd All Right Reserved ||www.agipcb.com
Internal usage only