This document discusses fuel injection systems, specifically multiport fuel injection (MPFI) and direct fuel injection (DFI) systems. It provides details on:
- The components and functioning of MPFI systems, including the air intake system, fuel delivery system, and electronic control system. It notes MPFI injects fuel into intake ports.
- The components and functioning of DFI systems, including high pressure fuel rails and injectors located in the cylinder. DFI allows for stratified charge and homogeneous operating modes.
- The advantages of DFI over MPFI, including more complete combustion, better temperature patterns during combustion, and reduced intake duct losses, leading to improved efficiency.
The heart of an automobile is its engine, and the heart requires a constant and ingenuous supply of blood, fuel in this case. There had been carburetors faithfully doing this holy work, but technology never seizes to move up. Therefore, the latest offering is the fuel injector for petrol engin es. Though it all started with a simple objective of supplying a controlled amount of fuel at proper intervals of time, it’s, as of now, not as simple as that. With emission norms getting stricter and changing trends in engine technology – high-speed engines, Variable displacement engines, Hybrid engines, etc – it became more and more of a necessity than a luxury to improve the fuel supply system.
Today’s fuel injection unit not only improves engine performance, but also helps in giving a cleaner exhaust that too with a increased fuel economy. The objectives can be attained using a microprocessor that directs the injector using a number of various input parameters. These parameters include manifold temperatures, throttle position, ignition timing, engine speed, load, and a lot more of other factors. The various strategically placed sensors measures these physical quantities and convey the same to the processor in electronic signals. The paper deals with the brief functionality and basic concept of operation of a modern fuel injector used in petrol engines.
The heart of an automobile is its engine, and the heart requires a constant and ingenuous supply of blood, fuel in this case. There had been carburetors faithfully doing this holy work, but technology never seizes to move up. Therefore, the latest offering is the fuel injector for petrol engin es. Though it all started with a simple objective of supplying a controlled amount of fuel at proper intervals of time, it’s, as of now, not as simple as that. With emission norms getting stricter and changing trends in engine technology – high-speed engines, Variable displacement engines, Hybrid engines, etc – it became more and more of a necessity than a luxury to improve the fuel supply system.
Today’s fuel injection unit not only improves engine performance, but also helps in giving a cleaner exhaust that too with a increased fuel economy. The objectives can be attained using a microprocessor that directs the injector using a number of various input parameters. These parameters include manifold temperatures, throttle position, ignition timing, engine speed, load, and a lot more of other factors. The various strategically placed sensors measures these physical quantities and convey the same to the processor in electronic signals. The paper deals with the brief functionality and basic concept of operation of a modern fuel injector used in petrol engines.
This presentation include the information about the different types of superchargers, advantages & disadvantages of superchargers and turbochargers. One case study of variable geometry turbocharger is included with literature review.
Types of Fuel Injection systems in Spark Ignition and Compression Ignition En...Hassan Raza
This presentation was prepared by Mechanical Engineers during their final year in their Internal Combustion Engine program offered at University of Engineering and Technology Lahore.
Crdi technology is more efficient and advance technology in the field of automobile engineering. This technology is using at a large scale by a number of car companies. In this presentation you will find the basic principle, working, and component description of crdi technology.
The common rail fuel injection system is finding increasing use engines as it has the potential to drastically cut emissions and fuel consumption. This system provides control of many important parameters linked to the injection system. It has a wide range of applications, From small to heavy-duty engines.
This presentation include the information about the different types of superchargers, advantages & disadvantages of superchargers and turbochargers. One case study of variable geometry turbocharger is included with literature review.
Types of Fuel Injection systems in Spark Ignition and Compression Ignition En...Hassan Raza
This presentation was prepared by Mechanical Engineers during their final year in their Internal Combustion Engine program offered at University of Engineering and Technology Lahore.
Crdi technology is more efficient and advance technology in the field of automobile engineering. This technology is using at a large scale by a number of car companies. In this presentation you will find the basic principle, working, and component description of crdi technology.
The common rail fuel injection system is finding increasing use engines as it has the potential to drastically cut emissions and fuel consumption. This system provides control of many important parameters linked to the injection system. It has a wide range of applications, From small to heavy-duty engines.
Electronic fuel injection vs carburettorsSalman Ahmed
These slides give you an idea of the different types of fuel injection systems that have been used throughout time.
A comparison between carburettors and EFI has been also looked on.
UNIT-II-ENGINE AUXILIARY SYSTEMS &TURBOCHARGERDineshKumar4165
Electronically controlled gasoline injection system for SI engines, Electronically controlled diesel injection system, Unit injector system, Rotary distributor type and common rail direct injection system, Electronic ignition system - Transistorized coil ignition system, capacitive discharge ignition system, Turbo chargers -Waste Gate Turbocharger, Variable Geomentry Turbocharger, Engine emission control by three way catalytic converter system, Emission norms (Euro and BS).
THIS PPT IS MAINLY BASED ON HOW THE ELCTRONIC FUEL INJECTION SYSTEMS IN DIFFERENT VEHICLES AND IN THIS WE HAVE DISCUSSED DIFFERENT TECHNIQUES IN DIFFERENT VEHIOCLEWS AND THEIR MODELS ALSO AND THEIR SYSTEMS ALSO IN THE VEHICLES AND THEIR COMPONENTS AND THEIR USES ARE ALSO MENTIONED IN THIS PPT SO IT IS USEFUL FOR BOTH MECHANICAL AND ELECTRONICS STUDENTS
This presentation was part of the course requirements of MEC 401 (Internal Combustion Engines) which I took in fall 2016. I made all the slides (participants in my group never works lol) and here I am uploading for the public if it can be of any help. Contact me for any info if needed.
====================
Razin Sazzad Molla
13107010@iubat.edu
====================
ENGINE AUXILIARY SYSTEMS
Electronically controlled gasoline injection system for SI engines, Electronically controlled diesel injection system (Unit injector system, Rotary distributor type and common rail direct injection system), Electronic ignition system (Transistorized coil ignition system, capacitive discharge ignition system), Turbo chargers (WGT, VGT), Engine emission control by three way catalytic converter system, Emission norms (Euro and BS).
Electronically controlled gasoline injection system for SI engines – Electronically controlled diesel injection system – unit injector system, rotary distributor type and common rail direct injection system – Electronic ignition system: transistorized coil ignition system, capacitive discharge ignition system – Turbochargers - waste gate turbocharger, variable geometry turbocharger – engine emission control by three way catalytic converter system – emission norms (Euro, BS).
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
2. Why fuel system
is required?????
•To Supply a proper Ratio of Gasoline and Air to
Cylinder.
•To supply power on demand.
•For low fuel pollutant emission.
•To increase the efficiency of petrol engine compare to
carburetor engine.
4. MPFI
• Multiport fuel injection injects fuel into the intake ports just upstream of
each cylinder's intake valve.
• In this system each cylinder has number of injectors to supply or spray fuel
in the cylinders intake manifold space
• MPFI system injects fuel into individual cylinders, based on commands from
the ‘on board engine management system computer’ – popularly known as
the Engine Control Unit/ECU.
• These techniques result not only in better ‘power balance’ amongst the
cylinders but also in higher output from each one of them, along with faster
throttle response.
5. Port Type system
The Injector is Placed in the Intake Manifold near the intake Port .
The Injector Sprays Gasoline into the Air inside the manifold .
Fuel & Air mix in Uniform manner And this mixture Entered into
Cylinder .
7. Components of MPFI
The system has four major components they are
1. Air intake system
2. Fuel delivery system
3. Electronic control system
8.
9.
10. AIR INTAKE SYSTEM
The air (corresponding to the throttle valve opening) is filtered by the air
cleaner, passes through the throttle body, and is distributed by the intake
manifold and finally drawn into each combustion chamber , opening and
closing of throttle valve is controlled by ECU according to demand & necessity
with proper calculation with input system
1. Throttle Body -Throttle valve, which is interlocked with the accelerator
pedal and controls the amount of the intake air .TP sensor which detects
the throttle valve opening and sends a signal to ECM
2. Idle Air ControlValve -The lAC valve controls opening of the bypass air
passage.The air bypasses the throttle valve through bypass passage and is
finally drawn into the intake manifold.
11. FUEL DELIVERY SYSTEM
The fuel in the fuel tank is pumped up by the fuel pump, filtered by fuel filter and fed
under pressure to each injector through the delivery 'pipe.The fuel is injected into the
intake port of the cylinder head when the injector opens according to the injection
signal form ECM.
1. Fuel Pump- It is an electric fuel pump and its operation is controlled by ECM. The
fuel is drawn through the inlet port with high pressure, It is discharged through the
outlet port, the fuel pump also has a check valve to keep some pressure in the fuel
feed line even when the fuel pump is stopped.
2. Pressure Regulator System-The fuel pressure regulator is diaphragm operated
relief valve consisting of diaphragm, spring and valve. It keeps the fuel pressure
applied to the injector 2.9Kglcm higher than intake manifold at all times
3. Injector-Each cylinder has one injector, which is installed between the intake
manifold delivery pipes. It is an electromagnetic type injection nozzle, which injects
fuel into the intake port of the cylinder head according to the signal from ECM.
13. ELECTRONIC CONTROL SYSTEM
The electronic control system consist of various sensors which detect the state
of engine and driving conditions, ECM which controls various devices according
to the signals from the sensors andVarious controlled devices.
The systems are -
• Fuel Injection Control System
• Idle Speed Control System
• Fuel Pump Control System
• Ignition Control System
• Radiator Fan Control System
14. Fail- Safe Function
When a trouble has occurred in such area of electronic fuel injection system
that includes the following parts and a failure signal is sent to ECM. Control
over the injector, idle air control valve and others are maintained on the basis
of the standard signals and/or CPU.This function is called failsafe function.
Thus with this function a certain level of engine performance is available even
when some failure occurs .
15. Type Of MPFI Systems
• The various types of MPFI systems are:
1.Simuntaneous: Together in all the cylinders.
2. Sequential: Direct injection into the individual cylinders
against their power strokes.
3.Group: In cylinder pairs [in V engines]
16. Choosing the correct technique according to the engine
configuration results in:
- better power balance between cylinders
- higher output from each cylinder
- faster throttle response
• Of these technologies, sequential gives the best combination of
power balance and output in inline 4 cylinder engines.
17. Throttle Injection system
This is similar to carburetor Body with throttle valve
controlling the amount of Air entering intake manifold .
The sensor is used to control the fuel mixing level.
18. Advantages of MPFI
I. Without using of carburetor the product cost is Low.
II. Engine Efficiency is High.
III.Low Maintenance.
IV.High Power to Engine.
V.No extra Heating While Warm up. Etc,.
19. Disadvantage Of MPFI
1.Hood Height of the Car is High.
2.Manifold Heat control System OR Valve is Required.
3.Intake Manifold control only air not Fuel .
21. What is the difference between quality control
and quantity control
Quantity control
• Quantity of supllied air
• Quantity of supplied fuel
Quantity is controlled over here generally the
Composition of mixture formed is
1kg of petrol & 14.7 kg of air
1 litre of petrol & 10000 l of air
Quality control
• Always sufficient quantity of supplied air
• Quantity of supplied fuel determine the engine
output
Thus variable composition of fuel mixture is
referred as quality control
25. Fuel system
• Fuel from fuel tank is supplied via fuel feed line
• Fuel is then feed into rail with high pressure by high pressure pump or triple
plunger radial piston pump
• Pressure of rail is maintain between 50-120 bars depending on idle situation or full
load by ECU with help of pressure sensor in fuel rail for receiving signal of pressure
and rail pressure is regulated with help of pressure releasing valve .
• Injector is located on cylinder of engine and rate of fuel volume on cylinder for
combustion is dependent on the fuel pressure and duration of injection. Fuel is
injected at precise moment with help of ECU controlled solenoid valve.
26. Difference in air supply of MPFI & DFI
In mpfi power delivery depend upon air supplied and petrol is added accordingly. Quantity of air
depend on opening of throttle valve.
In direct fuel injection throttle valve is always opened leading always sufficient supply of air and
output power depend on amount of fuel injected and time of injection
27. Air Supply
Swirl Duct
Swirl Flap
• In cylinder the air supplied via swirl duct low cross section area lead to high air pressure at
intake air and provide necessary swirl motion for the mixture of air and fuel.
• Swirl Duct is only in operation while stratified charged mode or homogeneous low power
mode
• During High Power mode large volume of air is required and swirl flap open for supply of
air along with swirl duct.
28. Difference Between stratified charged mode and
homogeneous mode
Stratified Charged Mode
• In stratified charged mode fuel
supplied to cylinder during
compression stroke
• This mode is load dependent and
run when engine revolution is
under 3000 rpm.
• This mode is generally called eco
mode
Homogeneous Mode
• In homogeneous mode fuel is
supplied to cylinder during intake
stroke.
• This mode is generally used during
high load and high engine
revolution
• This mode is called power mode
29. Why stratified charged is more efficient .
• Virtual complete combustion of fuel with high
proportion of air
• More favourable temperature pattern lead to
sepration of burnt fuel area and unburnt air
this help in separation of burnt area and
cylinder area .
• Which help in low losses of temperature during
work stroke.
30. Benefits of direct fuel injection
• Virtual complete combustion of fuel with high proportion of surplus air
• More favourable temperature pattern during combustion.
• Reduction of flow losses in intact duct.