The document provides step-by-step instructions for installing maxDNA software on a Windows workstation. It involves installing prerequisites like Service Pack 2, changing drive letters, configuring system settings like display resolution and time zone, installing additional software components, and configuring the workstation name and domain. The installation is completed by configuring the workstation startup and rebooting the system.
Turbine Stress Control Logic, Calculation & WorkingTahoor Alam Khan
Turbine Stress Control is one of the complex logics of BHEL turbine. This presentation clearly explains the Logic, working, calculations and influence of the same on operation of steam turbine. For further details and understanding, I can be reached on tahoorkhn03@gmail.com.
The presentation discuss about the operations, causes and remedies for the facing emergencies of steam Turbines. Specially for the 210MW LMW units. The emergencies can be created on simulator and studied on the simulator ACCORDINGLY.
Turbine Stress Control Logic, Calculation & WorkingTahoor Alam Khan
Turbine Stress Control is one of the complex logics of BHEL turbine. This presentation clearly explains the Logic, working, calculations and influence of the same on operation of steam turbine. For further details and understanding, I can be reached on tahoorkhn03@gmail.com.
The presentation discuss about the operations, causes and remedies for the facing emergencies of steam Turbines. Specially for the 210MW LMW units. The emergencies can be created on simulator and studied on the simulator ACCORDINGLY.
The discussion on "Handling of Turbines During Emergencies" has been detailed in the ppt. Some case studies are also discussed in the session where the course participants express their difficulties while coming across the emergencies in handling the turbines at their locations.
Steam Turbine Lube Oil System Protections Using SCADA & PLCNilesh Jha
Steam Turbine Protection System is designed with today technology to operate the thermal power plants in safe and reliable manner. The protection system operates only when any of the control system set point parameter is exceeded, and the steam turbine will damaged if it continues to operate. This paper presents overview of the steam turbine protection logics of lube of system and implementation for smooth automatic operation by using SIMATIC S7 PLC programming along with monitoring SCADA SYSTEM by using WinCC software.
Demand for high quality, greater efficiency and an automated machine has increased day by day in the industrial sector as well as power plants [1]. Power plants require continuous monitoring and inspection at frequent intervals. There are possibilities of errors at measuring and various stages involved with human workers and also the lack of few features of microcontrollers. Thus this paper takes a sincere attempt to explain the advantages that will be obtained by implementing automation system. The turbine lube oil system control which is the most important part of any power plant, and its automation is the precise effort of this paper. In order to automate a power plant and minimize human intervention, there is a need to develop PLC based system along with monitoring SCADA system that monitors the plant and helps reduce the errors caused by humans [2]. The internal storage of instruction of PLC is used for implementing function to control various types of machines and processes through digital or analog input/output modules. PLC systems are used to monitor and control a plant or equipment in industries such as power plants, energy, oil and gas refining and transportation.
The presentation is about the boiler drum's water level control, which is used on the ship for generating the steam. The presentation briefs about some controls used overboard to maintain the level inside the boiler for continuous steam supply.
This PPT explains the logic and requirement behind Boiler Loss of Flame Protection under MFT. To know more about Boiler Loss of Flame please connect to tahoorkhn03@gmail.com
The discussion on "Handling of Turbines During Emergencies" has been detailed in the ppt. Some case studies are also discussed in the session where the course participants express their difficulties while coming across the emergencies in handling the turbines at their locations.
Steam Turbine Lube Oil System Protections Using SCADA & PLCNilesh Jha
Steam Turbine Protection System is designed with today technology to operate the thermal power plants in safe and reliable manner. The protection system operates only when any of the control system set point parameter is exceeded, and the steam turbine will damaged if it continues to operate. This paper presents overview of the steam turbine protection logics of lube of system and implementation for smooth automatic operation by using SIMATIC S7 PLC programming along with monitoring SCADA SYSTEM by using WinCC software.
Demand for high quality, greater efficiency and an automated machine has increased day by day in the industrial sector as well as power plants [1]. Power plants require continuous monitoring and inspection at frequent intervals. There are possibilities of errors at measuring and various stages involved with human workers and also the lack of few features of microcontrollers. Thus this paper takes a sincere attempt to explain the advantages that will be obtained by implementing automation system. The turbine lube oil system control which is the most important part of any power plant, and its automation is the precise effort of this paper. In order to automate a power plant and minimize human intervention, there is a need to develop PLC based system along with monitoring SCADA system that monitors the plant and helps reduce the errors caused by humans [2]. The internal storage of instruction of PLC is used for implementing function to control various types of machines and processes through digital or analog input/output modules. PLC systems are used to monitor and control a plant or equipment in industries such as power plants, energy, oil and gas refining and transportation.
The presentation is about the boiler drum's water level control, which is used on the ship for generating the steam. The presentation briefs about some controls used overboard to maintain the level inside the boiler for continuous steam supply.
This PPT explains the logic and requirement behind Boiler Loss of Flame Protection under MFT. To know more about Boiler Loss of Flame please connect to tahoorkhn03@gmail.com
Hi friends today I am here with a power point presentation showing how to install Windows 7 in our PC with the help of its file stored in a media (i.e.pen drive)
This presentation is part of our reports in our Operating System Concepts subject. Included in the presentation are topics about Installing Windows XP, Peer to peer networking, File Sharing, Printer Sharing and Net meeting configuration.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
2. 1. Log on as Administrator. Insert the maxDNA 4.2.1CD in the CD drive and
close. (If the disk is already in place open and close the drawer to start the
installation)
3. 2. If Windows XP Service Pack 2 was not previously installed, the installation
program will automatically launch the SP2 installer. Once the installation of SP2
is complete the computer will need to be restarted. After the reboot, log on as
Administrator, re-insert the maxDNA CD and continue with the installation.
3. Answer the Question “Please Rename CD ROM to Z:” by pressing “OK”. The
Disk Manager Dialog should then appear.
Right-click the cd-rom icon with the caption "maxDNA 4.3". (should be drive letter
"D:" or “E:”)
Select "Change drive letter and paths" from the context menu that pops up.
Select Change then select "Z:" from the pull down menu of drive letters. Click OK
and close. You will get a warning that programs may no longer run – click Yes. Then
close the Disk Manager dialog.
4. Answer the Question “Please Edit all instances of the Old Drive Name To Z:” by
pressing “OK”. The REGEDIT dialog should then appear.
Press Ctrl-F to bring up the search function.
Type (“D:” or “E:”) into the find box.
When an entry containing (“D:” or “E:”) is found, make sure it is part of a drive
path name. For example, “D:INSTALL” would need to be changed but
MSWD:TEXT is not a valid path name.
Double click on the valid entries and change the "D:" in the entry to “Z:”
Press F3 to search the registry again.
Change additional entries in the same manner as above.
When all entries have been changed, close the Registry Editor
4. 5.
•Answer the Question “Please Check Resolution for 1024x768 at HiColor (16
bits):” by pressing “OK”. The Display Properties Dialog should appear.
•Adjust the settings as follows:
Color Quality Medium (16 bit)
Screen resolution: 1024x768
Refresh Frequency: <=75 Hz (Depends on Monitor, e.g. an LCD Monitor should
probably be set to 60 Hz)
5.
6. 6. Answer the “Please set Power Option to "Always ON"” by pressing “OK”. The
Power Control Panel Dialog should appear.
Set the Power schemes to “Always On” and under Settings for Always On power
scheme - turn off monitor to “Never”
7. Answer the “Please insure time and time zone are correct"” by pressing “OK”.
The Date and Time Properties Dialog should appear.
Set up the system clock to have the proper time.
With the time zone tab select the appropriate Time Zone for your area.
8. In a Windows XP WorkStation, answer the “Setup Net A & B to 172.16.160.00
and 172.17.160.00” by pressing “OK”. The Network Connections Dialog should
appear.
Double click on the Network Corresponding to Net A.
Click on “Properties”
Click On “Internet Protocol (TCP/IP) “ and Click on Properties.
Select “Use Following IP Address”
Enter “172.16.160.0”as the address
Fill in the values for the Subnet mask as 255.255.0.0
Close the TCP properties dialog.
Close the Net Properties dialog.
Repeat above for Net B using 172.17.160.0 as the address
7. 9. Answer the “Please enlarge Virtual memory to twice the size of RAM):” by
pressing “OK”. The System Properties Dialog should appear.
Select the “Advanced” Tab.
Click on the Performance “Settings” button.
Select the “Advanced” Tab.
Click the “Change” button.
Enter new Virtual memory settings equal to twice the size of RAM and maximum of
three times the size of RAM.
Click the “Set” button.
Close all open windows
8. 10. Answer the “Change to Allow Time Edit and Dismount of Media):” by pressing
“OK”. The Local Security Settings Dialog should appear.
Open the Local Policies folder
Click on “User Rights Assignment”
Double click on “Change the system time”
Click on “Add Users or Groups”
A window titled “Select Users or Groups” will be displayed. Click on the
“Advanced” button.
From the next window click on “Find Now”
Double click on “Everyone” from the list.
Close the “Change the system time” dialog box by clicking on “OK”
Using the navigation tree on the left side, click on “Security Options”
Double click on “Devices: Allowed to format or eject removable media”
Click on drop down and select “Administrators and Interactive Users”
Using the navigation tree on the left side, click on the top level “IP Security Policies
on Local Computer”
In the right side detail pane, the Client entry needs to have the Policy Assigned field
set to “Yes”. If not set to yes, then right click on the Client name field and select
“Assign” from the context menu.
Close the Local Security Settings Dialog
9. 11. If this a Windows XP WorkStation, answer the “Configure a default printer” by
pressing “OK”. The Printers folder should appear.
If you have a real printer attached it should be set up here
Otherwise set up a local printer by selecting “FILE: Print to File” under the “Use the
following port” option and select the “HP LaserJet III” printer from the “Install
Printer Software” page.
10. 12. Answer the “Install Word View if No Microsoft Word” by pressing “OK”. The
install dialog should appear.
Accept all defaults
11. 13. Answer the “Install Acrobat Reader” by pressing “OK”. The install dialog should
appear.
Accept all defaults
12. 14. If Office 97 will not be installed on this station, answer the “Install Access
Runtime (If no Office 97 Installed)” by pressing “OK”. The install dialog should
appear. Otherwise install Office 97 professional and insure that Access 97 is installed.
Accept all defaults
13. 15. Answer the “Install Java Runtime” by pressing “OK”. The install dialog should
appear.
Accept all defaults
14. •The maxDNA install will then be launched.
•A “Welcome” dialog will appear, confirm the version to be installed and
continue by clicking on the “Next” button.
•A dialog box will open showing the setup type to be installed. Select “Local
or Remote Workstation”. Click on the “Next” button to continue.
•Next select the components to install. Checking the DBM option will setup
the desktop and program menu to support systems using DBMs. Checking the
DPU4E/4F option will setup the desktop and program menu to support
systems using DPU4E/4F. Click on the “Next” button to continue.
•The installation will now proceed. Please wait a few minutes for its
completion.
•If during installation, a locked file warning dialog should appear, these can be
ignored! These may typically appear for TTF file types.
•Note that as part of the installation 3 user accounts named Engineer,
Operator, and EngineerService will automatically be created. The Engineer and
Operator accounts are each to be used as logins, and have initial passwords
matching their name in lower case. The EngineerService is special and
represents the account under which critical services will start and run
continuously, regardless of an interactive login being active. The
EngineerService account is thus not meant for use as an interactive login.
Once the maxDNA release installation is complete, the install procedure will
present a re-boot option screen to you. Select No to not reboot at this time.
15.
16. 16. Answer the “Would You Like to Import a Wks.ini & DpuList.ini? (No to run
DomainConfig)” question “Yes” if you have a Wks.ini available on the network or on
floppy. “No” if you need to run the Domain Configuration program to set one up.
Enter All domain names and station names for workstations on your network
A maxDNA Terminal Server installation should import the Wks.ini and DpuList.ini
files from another maxDNA station
17.
18. 17. Answer the “Please Configure Station Startup” by pressing “OK”. The Startup
Configuration dialog should appear.