This document discusses various topics related to magnetism including:
1. The properties of bar magnets such as having two poles and aligning along the north-south axis.
2. Current loops and solenoids can also act as magnets with a magnetic dipole moment.
3. The magnetic field due to a dipole follows an inverse cube law and the torque on a dipole in a uniform field is proportional to the magnetic moment.
4. Earth has its own magnetic field with a magnetic axis inclined to the geographic axis, and this field exhibits properties like declination and dip.
5. Materials are classified as diamagnetic, paramagnetic or ferromagnetic based on their relative permeability and
Electrostatic potential and capacitanceEdigniteNGO
Hello everyone, we are from Edignite NGO and we have come up with chapters of class 11 and 12 (CBSE).
For any queries, please contact
Lekha Periwal : +916290889619
Heer Mehta : +917984844099
Electrostatic potential and capacitanceEdigniteNGO
Hello everyone, we are from Edignite NGO and we have come up with chapters of class 11 and 12 (CBSE).
For any queries, please contact
Lekha Periwal : +916290889619
Heer Mehta : +917984844099
Magnetism and Electricity - ppt useful for grade 6,7 and 8tanushseshadri
Magentismand Electricity - ppt useful for grade 6,7 and8
Content
Magnets
Electromagnets
Electric bell
bar magnet
permanent magnet
Electromagnetism
Materials used to make a magnet
lodestone etc
Hope u guys like it
Magnetism and Matter" is a fundamental topic covered in Class 12 Physics curriculum, delving into the intricate relationship between magnetism and the behavior of matter. This branch of physics explores the properties of magnets, the magnetic field they generate, and the interactions between magnetic fields and various materials. The study encompasses a range of phenomena, from the fundamental principles governing the behaviour of magnetic fields to the practical applications of magnetism in modern technology.
For more information, visit-www.vavaclasses.con
Magnetism and Matter,Current loop as a magnetic dipole and its magnetic dipo...Oleepari
Current loop as a magnetic dipole and its magnetic dipole moment,magnetic dipole moment of a revolving electron,
bar magnet as an equivalent solenoid, magnetic field lines, earth's magnetic field and magnetic elements.
It is phenomenon by virtue of which a current produces a magnetic field. A straight current produces a circular magnetic field and a circular current produces a straight magnetic field at the centre of the circular coil.
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
1. MAGNETISM
1. Bar Magnet and its properties
2. Current Loop as a Magnetic Dipole and Dipole Moment
3. Current Solenoid equivalent to Bar Magnet
4. Bar Magnet and it Dipole Moment
5. Coulomb’s Law in Magnetism
6. Important Terms in Magnetism
7. Magnetic Field due to a Magnetic Dipole
8. Torque and Work Done on a Magnetic Dipole
9. Terrestrial Magnetism
10.Elements of Earth’s Magnetic Field
11.Tangent Law
12.Properties of Dia-, Para- and Ferro-magnetic substances
13.Curie’s Law in Magnetism
14.Hysteresis in Magnetism
Created by C. Mani, Principal, K V No.1, AFS, Jalahalli West, Bangalore
2. Magnetism:
- Phenomenon of attracting magnetic substances like iron, nickel, cobalt, etc.
• A body possessing the property of magnetism is called a magnet.
• A magnetic pole is a point near the end of the magnet where magnetism is
concentrated.
• Earth is a natural magnet.
•The region around a magnet in which it exerts forces on other magnets and
on objects made of iron is a magnetic field.
Properties of a bar magnet:
1. A freely suspended magnet aligns itself along North – South direction.
2. Unlike poles attract and like poles repel each other.
3. Magnetic poles always exist in pairs. i.e. Poles can not be separated.
4. A magnet can induce magnetism in other magnetic substances.
5. It attracts magnetic substances.
Repulsion is the surest test of magnetisation: A magnet attracts iron rod as well
as opposite pole of other magnet. Therefore it is not a sure test of magnetisation.
But, if a rod is repelled with strong force by a magnet, then the rod is surely
magnetised.
3. Representation of Uniform Magnetic Field:
x x x x x
x x x x x
x x x x x
x x x x x
x x x x x
Uniform field on the
plane of the diagram
Uniform field
perpendicular & into the
plane of the diagram
Uniform field perpendicular
& emerging out of the plane
of the diagram
Current Loop as a Magnetic Dipole & Dipole Moment:
I
B
Magnetic Dipole Moment is
M = I A n
SI unit is A m2
.
A
TIP:
When we look at any one side of the loop carrying current, if the
current is in anti-clockwise direction then that side of the loop behaves
like Magnetic North Pole and if the current is in clockwise direction
then that side of the loop behaves like Magnetic South Pole.
4. B
I I
xxxxx xx
B
Current Solenoid as a Magnetic Dipole or Bar Magnet:
TIP: Play previous and next to understand the similarity of field lines.
5. Bar Magnet:
S NP P
Magnetic Length
Geographic Length
M1. The line joining the poles of the magnet
is called magnetic axis.
2. The distance between the poles of the
magnet is called magnetic length of the
magnet.
Magnetic Dipole & Dipole Moment:
A pair of magnetic poles of equal and opposite strengths separated by a
finite distance is called a magnetic dipole.
The magnitude of dipole moment is the product of the pole strength m and
the separation 2l between the poles.
3. The distance between the ends of the magnet is called the geometrical
length of the magnet.
4. The ratio of magnetic length and geometrical length is nearly 0.84.
Magnetic Dipole Moment is M = m.2l. l
The direction of the dipole moment is from South pole to North Pole
along the axis of the magnet.
SI unit of pole strength is A.m
6. Coulomb’s Law in Magnetism:
The force of attraction or repulsion between two magnetic poles is directly
proportional to the product of their pole strengths and inversely
proportional to the square of the distance between them.
m1 m2
r
F α m1 m2
α r2
F =
μ0 m1 m2
4π r2F =
k m1 m2
r2
or
(where k = μ0 / 4π is a constant and μ0 = 4π x 10-7
T m A-1)
In vector form μ0 m1 m2 r
F =
4π r2
μ0 m1 m2 r
F =
4π r3
7. Magnetic Intensity or Magnetising force (H):
i) Magnetic Intensity at a point is the force experienced by a north pole
of unit pole strength placed at that point due to pole strength of the
given magnet. H = B / μ
ii) It is also defined as the magnetomotive force per unit length.
iii) It can also be defined as the degree or extent to which a magnetic
field can magnetise a substance.
iv) It can also be defined as the force experienced by a unit positive
charge flowing with unit velocity in a direction normal to the
magnetic field.
v) Its SI unit is ampere-turns per linear metre.
vi) Its cgs unit is oersted.
Magnetic Field Strength or Magnetic Field or Magnetic Induction
or Magnetic Flux Density (B):
i) Magnetic Flux Density is the number of magnetic lines of force
passing normally through a unit area of a substance. B = μ H
ii) Its SI unit is weber-m-2
or Tesla (T).
iii) Its cgs unit is gauss. 1 gauss = 10- 4
Tesla
8. Relation between B and H:
B = μ H (where μ is the permeability of the medium)
Magnetic Permeability (μ):
It is the degree or extent to which magnetic lines of force
can pass enter a substance.
Its SI unit is T m A-1
or wb A-1
m-1
or H m-1
Magnetic Flux (Φ):
i) It is defined as the number of magnetic lines of force
passing normally through a surface.
ii) Its SI unit is weber.
Relative Magnetic Permeability (μr):
It is the ratio of magnetic flux density in a material to that in vacuum.
It can also be defined as the ratio of absolute permeability of the material
to that in vacuum.
μr = B / B0 μr = μ / μ0or
9. Intensity of Magnetisation: (I):
i) It is the degree to which a substance is magnetised when placed in a
magnetic field.
ii) It can also be defined as the magnetic dipole moment (M) acquired per
unit volume of the substance (V).
iii) It can also be defined as the pole strength (m) per unit cross-sectional
area (A) of the substance.
iv) I = M / V
v) I = m(2l) / A(2l) = m / A
vi) SI unit of Intensity of Magnetisation is A m-1
.
Magnetic Susceptibility (cm ):
i) It is the property of the substance which shows how easily a substance
can be magnetised.
ii) It can also be defined as the ratio of intensity of magnetisation (I) in a
substance to the magnetic intensity (H) applied to the substance.
iii) cm = I / H Susceptibility has no unit.
Relation between Magnetic Permeability (μr) & Susceptibility (cm ):
μr = 1 + cm
10. Magnetic Field due to a Magnetic Dipole (Bar Magnet):
i) At a point on the axial line of the magnet:
O
S N
ll
x
BN
BS
BS
BN
BQ
y
Q
θ
θ
θθ
BQ=
μ0 M
4π (y2 +
l2
)3/2
ii) At a point on the equatorial line
of the magnet:
BP =
μ0 2 M x
4π (x2
– l2
)2
If l << x, then
If l << y, then
BP ≈
μ0 2 M
4π x3
BP ≈
μ0 M
4π y3
P
BP = BN - BS
M
Magnetic Field at a point on the axial line acts
along the dipole moment vector.
Magnetic Field at a point on the equatorial line
acts opposite to the dipole moment vector.
11. B
Torque on a Magnetic Dipole (Bar Magnet) in Uniform Magnetic Field:
The forces of magnitude mB act
opposite to each other and
hence net force acting on the bar
magnet due to external uniform
magnetic field is zero. So, there
is no translational motion of the
magnet.
θ
However the forces are along
different lines of action and
constitute a couple. Hence the
magnet will rotate and experience
torque.
t
B
M
Torque = Magnetic Force x distance
θ
2l
t = mB (2l sin θ)
= M B sin θ
t = M x B
Direction of Torque is perpendicular and into the plane containing M and B.
mB
mB
M
N
S
12. Work done on a Magnetic Dipole (Bar Magnet) in Uniform Magnetic
Field:
mB
mBdθ
θ1
θ2
dW = tdθ
= M B sin θ dθ
W = ∫ M B sin θ dθ
W = M B (cosθ1 - cos θ2)
θ1
θ2
If Potential Energy is arbitrarily taken zero when the dipole is at
90°, then P.E in rotating the dipole and inclining it at an angle θ is
Potential Energy = - M B cos θ
B
mB
mB
Note:
Potential Energy can be taken zero arbitrarily at any position of the
dipole.
13. Terrestrial Magnetism:
i) Geographic Axis is a straight line passing through the
geographical poles of the earth. It is the axis of rotation of the
earth. It is also known as polar axis.
ii) Geographic Meridian at any place is a vertical plane passing
through the geographic north and south poles of the earth.
iii) Geographic Equator is a great circle on the surface of the earth, in
a plane perpendicular to the geographic axis. All the points on the
geographic equator are at equal distances from the geographic
poles.
iv) Magnetic Axis is a straight line passing through the magnetic
poles of the earth. It is inclined to Geographic Axis nearly at an
angle of 17°.
v) Magnetic Meridian at any place is a vertical plane passing through
the magnetic north and south poles of the earth.
vi) Magnetic Equator is a great circle on the surface of the earth, in a
plane perpendicular to the magnetic axis. All the points on the
magnetic equator are at equal distances from the magnetic poles.
14. Declination (θ):
θ
δ
BV
BH
B
Magnetic Meridian
Geographic
MeridianThe angle between the magnetic meridian and
the geographic meridian at a place is Declination
at that place.
It varies from place to place.
Lines shown on the map through the places that
have the same declination are called isogonic
line.
Line drawn through places that have zero
declination is called an agonic line.
Dip or Inclination (δ):
The angle between the horizontal component of earth’s magnetic field and
the earth’s resultant magnetic field at a place is Dip or Inclination at that
place.
It is zero at the equator and 90° at the poles.
Lines drawn up on a map through places that have the same dip are called
isoclinic lines.
The line drawn through places that have zero dip is known as an aclinic line.
It is the magnetic equator.
15. N
Horizontal Component of Earth’s Magnetic Field (BH ):
The total intensity of the earth’s magnetic field does not lie in any
horizontal plane. Instead, it lies along the direction at an angle of dip (δ)
to the horizontal. The component of the earth’s magnetic field along the
horizontal at an angle δ is called Horizontal Component of Earth’s
Magnetic Field.
BH = B cos δ
Similarly Vertical Component is BV = B sin δ
such that B = √ BH
2
+ BV
2
Tangent Law:
If a magnetic needle is suspended in a region
where two uniform magnetic fields are
perpendicular to each other, the needle will
align itself along the direction of the resultant
field of the two fields at an angle θ such that
the tangent of the angle is the ratio of the two
fields.
θ
B2 B
B1
tan θ = B2 / B1
16. Comparison of Dia, Para and Ferro Magnetic materials:
DIA PARA FERRO
1. Diamagnetic
substances are those
substances which are
feebly repelled by a
magnet.
Eg. Antimony, Bismuth,
Copper, Gold, Silver,
Quartz, Mercury, Alcohol,
water, Hydrogen, Air,
Argon, etc.
Paramagnetic substances
are those substances
which are feebly attracted
by a magnet.
Eg. Aluminium, Chromium,
Alkali and Alkaline earth
metals, Platinum, Oxygen,
etc.
Ferromagnetic substances
are those substances
which are strongly
attracted by a magnet.
Eg. Iron, Cobalt, Nickel,
Gadolinium, Dysprosium,
etc.
2. When placed in
magnetic field, the lines of
force tend to avoid the
substance.
The lines of force prefer to
pass through the
substance rather than air.
The lines of force tend to
crowd into the specimen.
N S
S N S N
17. 2. When placed in non-
uniform magnetic field, it
moves from stronger to
weaker field (feeble
repulsion).
When placed in non-
uniform magnetic field, it
moves from weaker to
stronger field (feeble
attraction).
When placed in non-
uniform magnetic field, it
moves from weaker to
stronger field (strong
attraction).
3. When a diamagnetic
rod is freely suspended in
a uniform magnetic field, it
aligns itself in a direction
perpendicular to the field.
When a paramagnetic rod
is freely suspended in a
uniform magnetic field, it
aligns itself in a direction
parallel to the field.
When a paramagnetic rod
is freely suspended in a
uniform magnetic field, it
aligns itself in a direction
parallel to the field very
quickly.
SN SN SN
18. 4. If diamagnetic liquid
taken in a watch glass is
placed in uniform
magnetic field, it collects
away from the centre
when the magnetic poles
are closer and collects at
the centre when the
magnetic poles are
farther.
If paramagnetic liquid
taken in a watch glass is
placed in uniform
magnetic field, it collects
at the centre when the
magnetic poles are closer
and collects away from
the centre when the
magnetic poles are
farther.
If ferromagnetic liquid
taken in a watch glass is
placed in uniform
magnetic field, it collects
at the centre when the
magnetic poles are closer
and collects away from
the centre when the
magnetic poles are
farther.
19. 5. When a diamagnetic
substance is placed in a
magnetic field, it is
weakly magnetised in the
direction opposite to the
inducing field.
When a paramagnetic
substance is placed in a
magnetic field, it is
weakly magnetised in the
direction of the inducing
field.
When a ferromagnetic
substance is placed in a
magnetic field, it is
strongly magnetised in
the direction of the
inducing field.
6. Induced Dipole
Moment (M) is a small
– ve value.
Induced Dipole Moment
(M) is a small + ve value.
Induced Dipole Moment
(M) is a large + ve value.
8. Magnetic permeability
μ is always less than
unity.
Magnetic permeability μ is
more than unity.
Magnetic permeability μ is
large i.e. much more than
unity.
7. Intensity of
Magnetisation (I) has a
small – ve value.
Intensity of Magnetisation
(I) has a small + ve value.
Intensity of Magnetisation
(I) has a large + ve value.
20. 9. Magnetic susceptibility
cm has a small – ve value.
Magnetic susceptibility cm
has a small + ve value.
Magnetic susceptibility cm
has a large + ve value.
10. They do not obey
Curie’s Law. i.e. their
properties do not change
with temperature.
They obey Curie’s Law.
They lose their magnetic
properties with rise in
temperature.
They obey Curie’s Law. At
a certain temperature
called Curie Point, they
lose ferromagnetic
properties and behave
like paramagnetic
substances.
Curie’s Law:
Magnetic susceptibility of a material varies inversely
with the absolute temperature.
I α H / T or I / H α 1 / T
cm α 1 / T
cm = C / T (where C is Curie constant)
Curie temperature for iron is 1000 K, for cobalt 1400 K
and for nickel 600 K.
I
H / T
21. I
H
Hysteresis Loop or Magnetisation Curve:
O
A
B
C
D
E
F
Intensity of Magnetisation (I) increases with increase
in Magnetising Force (H) initially through OA and
reaches saturation at A.
When H is decreased, I decreases but it does not
come to zero at H = 0.
The residual magnetism (I) set up in the material
represented by OB is called Retentivity.
To bring I to zero (to demagnetise completely),
opposite (negative) magnetising force is applied.
This magetising force represented by OC is called
coercivity.
After reaching the saturation level D, when the
magnetising force is reversed, the curve closes to
the point A completing a cycle.
The loop ABCDEFA is called Hysteresis Loop.
The area of the loop gives the loss of energy due to
the cycle of magnetisation and demagnetisation and
is dissipated in the form of heat.
The material (like iron) having thin loop is used for
making temporary magnets and that with thick loop
(like steel) is used for permanent magnets. Animating Hysteresis Loop:
Courtesy - WebsiteEnd of Magnetism