This document discusses the types of lines used in engineering drawings including visible lines, hidden lines, center lines, and dimension and extension lines. It describes the purpose of dimensioning drawings to fully define the size, location, finish and other requirements for manufacturing. Key aspects of dimensioning covered include using size and location dimensions, dimensioning features like holes, arcs, cylinders, chamfers and rounded ends according to manufacturing methods, and following practices for placement of dimensions, leaders, extension lines and dimension figures.
The basic function of a drawing is to convey information clearly and so that it can be easily understood by those for whom it is intended. To insure that this function is achieved a number of measures have been universally agreed on when drawings are prepared and presented. The universal agreement is termed standardization and we refer to drafting standards. Drafting standards are set by organizations and adhered to by all members of the organization. Hence standards will differ from one organization to the other. However, because it is necessary for communication between different groups and between any group and the general consuming public, there exists commonality in how drawing are presented even if specific details may vary. The subheadings discussed below give some details on how the objective is achieved
The basic function of a drawing is to convey information clearly and so that it can be easily understood by those for whom it is intended. To insure that this function is achieved a number of measures have been universally agreed on when drawings are prepared and presented. The universal agreement is termed standardization and we refer to drafting standards. Drafting standards are set by organizations and adhered to by all members of the organization. Hence standards will differ from one organization to the other. However, because it is necessary for communication between different groups and between any group and the general consuming public, there exists commonality in how drawing are presented even if specific details may vary. The subheadings discussed below give some details on how the objective is achieved
check it out: http://goo.gl/vqNk7m
CADmantra Technologies pvt. Ltd. is a CAD Training institute specilized in producing quality and high standard education and training. We are providing a perfact institute for the students intersted in CAD courses CADmantra is established by a group of engineers to devlop good training system in the field of CAD/CAM/CAE, these courses are widely accepted worldwide.
#catiatraining
#ANSYS #CRE-O
#hypermesh
#Automobileworkshops
#enginedevelopment
#autocad
#sketching
Detail drawings completely describe a single part with multiview orthographic projections.
Should provide all the information necessary to economically manufacture a high quality part.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
3. Visible lines represent features that can be seen in the
current view
Meaning of Lines
Hidden lines represent features that can not be seen in
the current view
Center line represents symmetry, path of motion, centers
of circles, axis of axisymmetrical parts
Dimension and Extension lines indicate the sizes and
location of features on a drawing
4. DIMENSIONING
Why do we need to dimension drawings?
Dimensions and notes define the size, location, finish
and other requirements to fully define what you want
manufactured.
6. Why is dimensioning important?
• Even if you make a drawing to scale, it would be difficult to determine
the exact precision that is needed.
• It would be time consuming to measure each of the lines to
determine measurement.
• The basis for modern part dimensioning is the need for
interchangeable parts (being able to buy something off the shelf that fits what you already have)
7. Generally, dimensioning involves identifying the size and location
dimensions.
• Size Dimensions determine the overall size and
shape of a drawing.
• Location Dimensions typically determine where
different entities are located within the drawing.
8. Location Dimensions
• When locating an item within the drawing (locating a hole or other
object) always give the horizontal and vertical position as it relates to
the object.
• Then give the size of the object
• Eg. Where is the object located and how big is it?
9. Most dimensions consist of three types of lines
• Dimension lines
• Extension lines
• Centerlines
Dimension Centerlines Extension Lines
10. Dimension Lines
• A Dimension Line is a thin, dark, solid line that is terminated by an
arrowhead.
1.0
Dimension
Dimension Line Arrow Head
11. Extension Lines
• An Extension Line is a thin, dark, solid line that extends from a point
on the drawing to which a dimension refers.
5.0
1/16 gap
Extension
Line
1/8
beyond
12. Centerlines
• A Centerline is a thin, dark line alternating long and short dashes that is
commonly used as an extension line in location holes or other symmetrical
objects.
13. Dimensioning Systems
• Unidirectional System: where all dimensions are read from the
bottom of the sheet (like a book)
• Aligned System: all the dimensions are aligned with the surface that
they represent (read from bottom or right side of sheet)
14. Dimension Stacking
• When stacking dimensions, the shortest dimension
goes closest to the object, while the longest (or
overall) appears furthest.
• Dimension Lines typically should not cross
extension lines or other dimension line
LABEL THE TYPE OF DIMENSIONING THAT IS USED IN EACH OF THE DRAWINGS
15. Arrow Heads
• When drawing Arrowheads they should be long and lean at a ratio of
3:1 (length:height)
• In Architecture this is different!
16. Leaders
• A Leader is a thin solid line that directs the viewer’s attention to a
note or dimension.
• A Leader with an arrow identifies a location.
• A Leader with an dot identifies a surface.
• Try not to draw leaders so that they are horizontal or vertical (and/or
to long)
• A Leader to a circle should be drawn so that it would pass through the
center of the circle if extended.
Note here Surface here
17. Dimensioning Arcs Vs. Circles
• When dimensioning an arc use the radius symbol (R)
• When dimensioning a circle use the diameter symbol ( )
R1.0
2.0
18. Over Dimensioning
• When dimensioning, it is good technique to avoid listing the
dimension more than once through out the drawing.
• If you need to list a dimension more than once, for accuracy or ease
of viewing, you must encase the dimension within a set of brackets.
(1.3753)Reference Dimension
19. Rules and Practices
Accurate dimensioning is one of the most demanding undertakings
when designing parts.
Use the checklist to insure you have followed the basic dimensioning
rules.
Keep in mind there may be a case where the need to break a standard
could occur to give clarity to the part and manufacturer.
20. Standards
In order for the drawings to be dimensioned so
that all people can understand them, we need to
follow standards that every company in the world
must follow. Standards are created by these
organizations:
-ANSI -MIL
-ISO -DOD
-DIN -CEN
-JIS
21. Standards Institutions
ANSI - American National Standards Institute - This
institute creates the engineering standards for
North America.
ISO - International Organization for
Standardization - This is a world wide organization
that creates engineering standards with
approximately 100 participating countries.
22. Standards Institutions
DIN - Deutsches Institut für Normung - The German Standards
Institute created many standards used world wide such as the
standards for camera film.
JIS - Japanese Industrial Standard - Created after WWII for Japanese
standards.
CEN - European Standards Organization
23. Standards Institutions
The United States military has two organizations that develop
standards.
DOD - Department Of Defense
MIL - Military Standard
24. Dimensioning Checklist
Each dimension should be written clearly with only one
way to be interpreted.
A feature should be dimensioned only once.
Dimension and extension lines should not cross.
Each feature should be dimensioned.
Dimension features or surfaces should be done to a
logical reference point.
25. Dimension Checklist
Dimension circles should have diameters
and arcs with a radius.
A center line should be extended and used
as an extension line.
Dimension features on a view should clearly
show its true shape.
Enough space should be provided to avoid
crowding and misinterpretation.
26. Dimension Checklist
Extension lines and object lines should not overlap.
Dimensions should be placed outside the part.
Center lines or marks should be used on all circles and
holes.
33. EXTENSION LINES
Leave a visible gap (≈ 1 mm) from a view and start drawing an extension line.
Extend the lines beyond the (last) dimension line 1-2 mm.
Visible gap
COMMON MISTAKE
34. Do not break the lines as they cross object lines.
COMMON MISTAKE
Continuous
EXTENSION LINES
35. Dimension lines should not be spaced too close
to each other and to the view.
11
34
Leave a space at least
2 times of a letter height.
16
35
DIMENSION LINES
Leave a space at least
1 time of a letter height.
36. DIMENSION FIGURES
The height of figures is suggested to be 2.5~3 mm.
Place the numbers at about 1 mm above dimension
line and between extension lines.
COMMON MISTAKE
11
11
34
34
37. 16.25
16.25
or
DIMENSION FIGURES
When there is not enough space for figure or
arrows, put it outside either of the extension lines.
1
Not enough space
for figures
Not enough space
for arrows
1 1
38. The JIS and ISO standards adopt the unit of
Angular dimension in degree with a symbol “o”
place behind the figures (and if necessary
minutes and seconds may be used together).
DIMENSION FIGURES : UNITS
Length dimension in millimeters without
specifying a unit symbol “mm”.
39. 1. Aligned method
2. Unidirectional method
The dimension figures are placed so that they are readable from the
bottom and right side of the drawing.
The dimension figures are placed so that they can be read from the
bottom of the drawing.
Do not use both system on the same drawing or on the same series of
drawing (JIS Z8317)
DIMENSION FIGURES : ORIENTATION
44. LOCAL NOTES
Place the notes near to the feature which they
apply, and should be placed outside the view.
Always read horizontally.
10 Drill
COMMON MISTAKE
10 Drill
≈ 10mm
10Drill
Too far
46. THE BASIC CONCEPT
Dimensioning is accomplished by adding size and location information
necessary to manufacture
the object.
Clear
Complete
Facilitate the
- manufacturing method
- measurement method
This information have to be
47. L
L
S
S
S
Designed
part
EXAMPLE
To manufacture this part
we need to know…
1. Width, depth and
thickness of the part.
2. Diameter and depth
of the hole.
3. Location of the holes.
“S” denotes size dimension.
“L” denotes location dimension.
S
L
L
48. ANGLE
To dimension an angle use circular dimension
line having the center at the vertex of the angle.
COMMON MISTAKE
49. ARC
Arcs are dimensioned by giving the radius, in the
views in which their true shapes appear.
The letter “R” is always lettered before the figures
to emphasize that this dimension is radius of an
arc.
or
50. ARC
The dimension figure and the arrowhead should
be inside the arc, where there is sufficient space.
R 62.5
Move figure outside
R 6.5
Move both figure
and arrow outside
Sufficient space
for both.
Sufficient space
for arrowhead only.
R 58.5
Insufficient space
for both.
51. ARC
Leader line must be radial and inclined with
an angle between 30 ~ 60 degs to the horizontal.
COMMON MISTAKE
R62.5
R62.5
R62.5
R62.5R62.5
R62.5
52. ARC
Use the foreshortened radial dimension line,
when arc’ s center locates outside the sheet or
interfere with other views.
Drawing sheet
Method 1Method 2
53. FILLETS AND ROUNDS
Give the radius of a typical fillet only by using a
local note.
R6.5
If all fillets and rounds are uniform in size,
dimension may be omitted, but it is necessary to
add the note “ All fillets and round are Rxx. ”
NOTE:
All fillets and round are R6.5
Drawing sheet
R12
unless otherwise specified.
NOTE:
All fillets and round are R6.5
54. The curve constructed from two or more arcs,
requires the dimensions of radii and center’s
location.
CURVE
COMMON MISTAKE
Tangent point
55. CYLINDER
Size dimensions are diameter and length.
Measurement
method
Location dimension must be located from its
center lines and should be given in circular view.
57. HOLES
Size dimensions are diameter and depth.
Location dimension must be located from its
center lines and should be given in circular view.
Measurement
method
58. xx
Use leader line and local note to specify diameter
and hole’s depth in the circular view.
HOLES : SMALL SIZE
xx Drill, Thru.
1) Through thickness hole
xx Thru.
or
xx Drill.
or or
59. xx, yy Deep
HOLES : SMALL SIZE
or
xx Drill, yy Deep
Hole’s
depth
Use leader line and local note to specify diameter
and hole’s depth in the circular view.
2) Blind hole
60. xx
Use extension and
dimension lines
Use diametral
dimension line
Use leader line
and note
HOLES : LARGE SIZE