Land Mobile Radio
•Download as PPTX, PDF•
0 likes•50 views
Land Mobile Radio (LMR) technology provides reliable communication through handheld portable radios, mobile radios in vehicles, and fixed base station radios. It uses a dedicated radio spectrum for voice and basic data transmission. While LMR has limitations like limited coverage area and data capacity, it remains critical for public safety and industries requiring communication in remote areas. Future integration with LTE and use of artificial intelligence could enhance LMR's capabilities.
Report
Share
Report
Share
Recommended
Hw lte rf-optimization-guide
This document provides guidelines for LTE radio frequency (RF) network optimization. It describes the network optimization process including single site verification and RF optimization. Key aspects of RF optimization covered include preparing by collecting data and analyzing problems, adjusting parameters such as transmit power and neighbor lists, and ensuring optimization objectives like coverage, signal quality, and handover success rates are met. The document also details common issues like weak coverage, lack of a dominant cell, and cross coverage and methods for resolving them.
Lte kp is calculation
This document provides instructions for calculating key performance indicators (KPIs) for an LTE network using TEMS Discovery software. It describes how to import log files from the drive test team, validate the data, and calculate KPIs such as download/upload throughput, ping latency, handover success rate, session drop rate, bearer setup time, and ERAB setup time. The process involves filtering the data, exporting results to Excel, and using a KPI tool to analyze signaling messages and determine values like setup times and drop rates. In summary, it outlines the steps for auditing field measurement data and accurately measuring important LTE network performance metrics.
LTE optimization
This document describes the design of an LTE network optimization project by a group of students from Taiz University. It includes an introduction to LTE, the network planning process, and LTE system architecture. The network planning section discusses coverage planning including link budget calculations and propagation models, as well as capacity planning considering factors like interference levels and supported modulation schemes. The document also provides an overview of LTE system architecture components including the user equipment, E-UTRAN, EPC, and functions of each. It concludes with a section on LTE radio frequency optimization methods.
Network planning and optimization using atoll
The document outlines the steps for network planning and optimization using Atoll software, including importing geometrical data, clutter classes, vectors, site data, and transmitters. It describes creating propagation models for different clutter types, predicting coverage through signal level, calculating overlapping zones, assigning BCCH frequencies, and predicting C/I values. The steps conclude with analyzing planned data against field data imported from a drive test to evaluate network performance.
Lte basic parameters
LTE uses various frequency bands and duplexing techniques to provide high-speed data and peak download speeds of up to 300 Mbps. It supports mobility of up to 350 km/h and uses advanced technologies like OFDM, SC-FDMA, MIMO and turbo coding to achieve low latency and high bandwidth. LTE specifications define channel bandwidths of 1.4, 3, 5, 10, 15 and 20 MHz with modulation schemes of QPSK, 16QAM and 64QAM.
Radio Communication
Radio broadcasting has its origins in the telegraph, invented by Samuel Morse in 1836. In the late 19th century, scientists like Heinrich Hertz and Nikola Tesla began experimenting with wireless transmission of electromagnetic waves through the air. Guglielmo Marconi is often credited with inventing radio in 1895, transmitting the first radio signal across the English Channel. In the early 20th century, radio was used for ship-to-shore communication and broadcasting Christmas music from stations like 8XK helped launch commercial radio. The Radio Act of 1927 established the Federal Radio Commission to regulate stations and frequencies.
Lte irat-troubleshooting-guide
This document provides a troubleshooting guide for LTE inter-radio access technology (IRAT) handovers. It describes why IRAT is needed as voice revenues remain important while data revenues grow. It also outlines the applications of IRAT, delivery policies for idle mode, connected mode, and voice services. Signaling procedures for IRAT handovers including reselection, redirection, and PS handover are defined. Key performance indicators for IRAT including control plane delays and user plane interruption times are also defined to help diagnose IRAT issues.
E nodeb
This document provides an overview of tests for installing and maintaining LTE eNodeB base stations. It describes the key tests to check characteristics like downlink and uplink speeds, channel bandwidths, frequency bands, frame structure, and modulation schemes. The document then explains specific tests to check aspects like transmission power, occupied bandwidth, spectrum emission mask, ACLR, spurious emissions, and modulation quality of control and data channels. It provides procedures for configuring a tester and interpreting results for each test.
Recommended
Hw lte rf-optimization-guide
This document provides guidelines for LTE radio frequency (RF) network optimization. It describes the network optimization process including single site verification and RF optimization. Key aspects of RF optimization covered include preparing by collecting data and analyzing problems, adjusting parameters such as transmit power and neighbor lists, and ensuring optimization objectives like coverage, signal quality, and handover success rates are met. The document also details common issues like weak coverage, lack of a dominant cell, and cross coverage and methods for resolving them.
Lte kp is calculation
This document provides instructions for calculating key performance indicators (KPIs) for an LTE network using TEMS Discovery software. It describes how to import log files from the drive test team, validate the data, and calculate KPIs such as download/upload throughput, ping latency, handover success rate, session drop rate, bearer setup time, and ERAB setup time. The process involves filtering the data, exporting results to Excel, and using a KPI tool to analyze signaling messages and determine values like setup times and drop rates. In summary, it outlines the steps for auditing field measurement data and accurately measuring important LTE network performance metrics.
LTE optimization
This document describes the design of an LTE network optimization project by a group of students from Taiz University. It includes an introduction to LTE, the network planning process, and LTE system architecture. The network planning section discusses coverage planning including link budget calculations and propagation models, as well as capacity planning considering factors like interference levels and supported modulation schemes. The document also provides an overview of LTE system architecture components including the user equipment, E-UTRAN, EPC, and functions of each. It concludes with a section on LTE radio frequency optimization methods.
Network planning and optimization using atoll
The document outlines the steps for network planning and optimization using Atoll software, including importing geometrical data, clutter classes, vectors, site data, and transmitters. It describes creating propagation models for different clutter types, predicting coverage through signal level, calculating overlapping zones, assigning BCCH frequencies, and predicting C/I values. The steps conclude with analyzing planned data against field data imported from a drive test to evaluate network performance.
Lte basic parameters
LTE uses various frequency bands and duplexing techniques to provide high-speed data and peak download speeds of up to 300 Mbps. It supports mobility of up to 350 km/h and uses advanced technologies like OFDM, SC-FDMA, MIMO and turbo coding to achieve low latency and high bandwidth. LTE specifications define channel bandwidths of 1.4, 3, 5, 10, 15 and 20 MHz with modulation schemes of QPSK, 16QAM and 64QAM.
Radio Communication
Radio broadcasting has its origins in the telegraph, invented by Samuel Morse in 1836. In the late 19th century, scientists like Heinrich Hertz and Nikola Tesla began experimenting with wireless transmission of electromagnetic waves through the air. Guglielmo Marconi is often credited with inventing radio in 1895, transmitting the first radio signal across the English Channel. In the early 20th century, radio was used for ship-to-shore communication and broadcasting Christmas music from stations like 8XK helped launch commercial radio. The Radio Act of 1927 established the Federal Radio Commission to regulate stations and frequencies.
Lte irat-troubleshooting-guide
This document provides a troubleshooting guide for LTE inter-radio access technology (IRAT) handovers. It describes why IRAT is needed as voice revenues remain important while data revenues grow. It also outlines the applications of IRAT, delivery policies for idle mode, connected mode, and voice services. Signaling procedures for IRAT handovers including reselection, redirection, and PS handover are defined. Key performance indicators for IRAT including control plane delays and user plane interruption times are also defined to help diagnose IRAT issues.
E nodeb
This document provides an overview of tests for installing and maintaining LTE eNodeB base stations. It describes the key tests to check characteristics like downlink and uplink speeds, channel bandwidths, frequency bands, frame structure, and modulation schemes. The document then explains specific tests to check aspects like transmission power, occupied bandwidth, spectrum emission mask, ACLR, spurious emissions, and modulation quality of control and data channels. It provides procedures for configuring a tester and interpreting results for each test.
LTE Location Management and Mobility Management
Provides an overview of power management (connected and idle mode) and mobility management (both idle-mode mobility (cell selection and re-selection) and active mode (handovers).
Handover 3g
This document provides a guide for optimizing WCDMA handover and call drop problems. It discusses key performance indexes for handover and call drop, presents optimization flows and analysis processes. It also analyzes common FAQs and problems related to soft handover, hard handover, inter-RAT handover, call drops, HSDPA, and HSUPA handovers. Appendices provide details on concepts, algorithms, and signaling flows. The overall goal is to help engineers optimize network performance and troubleshoot specific issues to improve handover success rates and reduce call drops.
4g interview-question
The document contains questions and answers about LTE (Long Term Evolution) technology. LTE aims to improve spectral efficiency, lower costs, and improve services compared to previous standards. It provides peak download rates of at least 100 Mbps and round-trip times of less than 10ms. While LTE is considered a 3.9G technology, LTE Advanced seeks to meet the full ITU 4G requirements including peak rates of up to 1 Gbps for low mobility. The LTE architecture consists of the E-UTRAN access network and EPC core network. Key network elements include eNodeBs, MMEs for mobility management, SGWs for routing and anchoring user data, and PGWs for external connectivity
Amr rlt presentation
This document discusses radio link failures (RLF) and recommends separate radio link timeout (RLT) thresholds for adaptive multi-rate (AMR) and non-AMR calls. It notes that AMR calls are more robust at lower signal levels, so using a common RLT value can cause unnecessary dropping of AMR calls. Studies showed increasing the RLT threshold for AMR calls by over 50% (e.g. from 20 to 36) reduced call drop rates by 25% while maintaining speech quality. It also recommends increasing the uplink RLT threshold by 4 frames to better protect the weaker uplink channel.
Dt parameters
Drive tests are performed to continuously monitor and optimize network performance. Key parameters measured include RxLevel, RxQuality, Frame Erasure Rate, Bit Error Rate, Carrier to Interferer ratio, and Speech Quality Index for GSM networks. For CDMA networks, parameters like RxLevel, TxPower, Carrier Energy to Interference, Carrier to Interferer ratio, and Signal to Noise Ratio are measured. Maintaining these parameters within normal ranges helps ensure quality of service and identify issues needing attention.
Sample Optimization Drivetest report
The document provides a report on MTN-Nokia MS performance in the Enugu cluster in Nigeria for February 2018. It includes summaries of key performance indicators for 2G and 3G networks, observations on areas of poor quality or coverage, and recommendations to address issues such as missing neighbors or handover problems between specific cells. Graphs and charts are also included to illustrate metrics like Rx level, Rx quality, cell IDs and throughput over time.
RF measurement and optimization Engineer EMERSON EDUARDO RODRIGUES
The document discusses various radio frequency (RF) measurement quantities used in LTE field measurements and optimization, including RSRP, RSSI, RSRQ, and SINR. It defines these terms and explains the relationships between them. For example, it describes how RSRP measures the power of a single resource element while RSSI measures power over the entire bandwidth. It also provides information on how measurement results from different tools can help with RF network optimization.
Radio Measurements in LTE
The document discusses various LTE measurement parameters and procedures including:
1. The eNB reports a list of detected PRACH preambles and measures timing advance, average RSSI, average SINR, UL CSI, and transport BLER for RRM purposes.
2. UE measurements include CQI, RSRP, and RSRQ while eNB measurements include timing advance, RSSI, SINR, UL CSI, detected preambles, and transport BLER. Inter-RAT measurements are also discussed.
3. Examples of RSRP, RSRQ, and timing advance procedures are provided along with CQI measurement details. PLMN selection, cell selection,
A New Route for Submarine Cables
This document proposes a new submarine cable route for Southeast Asia through Malaysia to provide an alternative to the congested Straits of Melaka. Currently, both shipping and submarine cables are routed through the narrow Straits, concentrating risk. The document suggests landing cables in Malaysia and establishing open cable landing stations and data centers to provide lower latency connectivity within Malaysia and to other regions by bypassing the Straits. This could attract cables seeking a more direct route and help distribute traffic by establishing optical internet exchanges in multiple Malaysian cities.
RF Planning and Optimization
This document summarizes the author's knowledge and experience with RF planning and optimization. It includes tasks performed like proposal writing, comparative analysis of technologies and vendors, and study of common problems. RF planning and optimization involves tasks like site survey, capacity and coverage planning, frequency use, interference mitigation and network evaluation. The process includes problem analysis, drive testing, simulation, and proposing solutions to improve coverage, capacity and quality while managing costs and resources.
03 150323115803-conversion-gate01
The document discusses LTE drive test and coverage analysis, including factors that influence LTE coverage, methods for identifying weak coverage areas and coverage holes, techniques for resolving issues like cross coverage and imbalance between uplink and downlink, and case studies on using drive tests to find problems and adjusting antenna parameters to improve coverage. Key aspects of LTE like reference signal power, RSRP measurement, and the differences between TDD and FDD are also explained.
20121129 lte basic procedures (2)
1) The mobile device searches for synchronization signals to detect available LTE cells and identifies key parameters like PCI from the PSS and SSS.
2) It then receives the MIB and SIBs containing configuration details to access the network from the selected cell.
3) The attach procedure is started, establishing an RRC connection and authenticating the user to activate a default bearer for IP data transmission.
Training material umts cell selection and reselection
This document summarizes the key aspects of UMTS cell selection and reselection. It describes the processes the UE goes through for PLMN selection, initial cell selection when no cell information is stored, and cell reselection when camped on a cell. It provides details on the cell selection criteria and parameters like Qqualmin, Qrxlevmin, DeltaQrxlevmin, and MaxRACHTxPwr that determine if a cell is suitable or acceptable.
topqualityvoice.pptx
Huawei provides a Voice Radar tool to evaluate voice quality from four aspects: quality, completion, accessibility, and abnormal calls. It uses key performance indicators to generate a total score on a scale of 0 to 10. The document discusses optimization solutions such as improving wireless parameters, utilizing HD voice features, and addressing network issues to improve voice quality scores.
Lte drive test parameter introduction
The document discusses 4G LTE drive testing. It describes the necessary equipment for drive testing including a notebook, GPS, and LTE dongle. It outlines key LTE radio parameters that are measured like PCI, RSRP, SINR, and MIMO. It also discusses measuring UE state information, throughput, and LTE access procedures including attach requests, random access failures, and E-RAB failures. Finally, it compares the impact of ANR capabilities versus UE capabilities on measuring neighboring cells within and between eNodeBs.
Procedure install cn510 step by step
This document provides step-by-step instructions for installing a CN510 and upgrading a Mini Link to CN510. It details pre-installation tasks like site surveys and material checks. The installation process includes fixing the CN510 and connecting power and cables. Configuration steps cover settings like the IP address, OSPF routing, and radio link parameters based on an SF6 file. Backup from the facing node and coordination with teams is also required before and after the installation.
Radio Network Design & Roll Out
This document provides an overview of radio network design for rollouts, including configuration of parameter structures, site configuration, mobility configuration, and neighbors configuration. It discusses organizing parameters into managed object classes with a hierarchical structure. Major sections cover defining radio modules and cells, antenna line configuration, frequency configuration, and adding new objects. Configuration of idle and connected mode mobility parameters and system information blocks is also addressed.
RSCP RSSI EC/NO CQI
Some clarifications on the misconceptions of EcNo and why it is not used in HSDPA Drive Test to evaluate link quality.
Day 1 LTE Technology Overview
The document discusses the need for new wireless technologies to support increasing demand for data and high-speed services. It notes that technologies need to focus on using more spectrum, improving spectral efficiency, employing smaller cell sizes like femtocells, and incentivizing off-peak traffic. The rest of the document provides details on how LTE wireless technology addresses these needs through technical specifications and network architecture, including the use of an Evolved Packet Core and separating the user and control planes.
Telecommunication basics
Telecommunication involves the transmission of information using technology. It has basic elements including a transmitter, transmission medium, and receiver. Telecommunication occurs through various channels and technologies like telephone networks, cellular networks, and the internet. Common concepts include modulation, multiplexing, circuit switching, and packet switching. Modern cellular technologies progression includes 2G, 3G, LTE, and VoLTE networks that provide improved data speeds and services. ADSL uses frequencies on copper telephone lines to provide faster internet speeds than traditional modems.
Coexistence or Convivence PMR-LTE Technology
Presentation given by Aitor Sanchoyerto within called technical seminars: The future of telecommunications networks emergency.
Cellular charles
The document provides information about cellular networks and technologies. It discusses how cellular networks use cells served by base stations to provide radio coverage over a wide area. This allows many portable transceivers like mobile phones to communicate through the network. It then describes some key components of cellular networks like base stations, mobile switching offices, and mobile devices. The document also summarizes different cellular network access technologies including AMPS, TDMA, and CDMA.
More Related Content
What's hot
LTE Location Management and Mobility Management
Provides an overview of power management (connected and idle mode) and mobility management (both idle-mode mobility (cell selection and re-selection) and active mode (handovers).
Handover 3g
This document provides a guide for optimizing WCDMA handover and call drop problems. It discusses key performance indexes for handover and call drop, presents optimization flows and analysis processes. It also analyzes common FAQs and problems related to soft handover, hard handover, inter-RAT handover, call drops, HSDPA, and HSUPA handovers. Appendices provide details on concepts, algorithms, and signaling flows. The overall goal is to help engineers optimize network performance and troubleshoot specific issues to improve handover success rates and reduce call drops.
4g interview-question
The document contains questions and answers about LTE (Long Term Evolution) technology. LTE aims to improve spectral efficiency, lower costs, and improve services compared to previous standards. It provides peak download rates of at least 100 Mbps and round-trip times of less than 10ms. While LTE is considered a 3.9G technology, LTE Advanced seeks to meet the full ITU 4G requirements including peak rates of up to 1 Gbps for low mobility. The LTE architecture consists of the E-UTRAN access network and EPC core network. Key network elements include eNodeBs, MMEs for mobility management, SGWs for routing and anchoring user data, and PGWs for external connectivity
Amr rlt presentation
This document discusses radio link failures (RLF) and recommends separate radio link timeout (RLT) thresholds for adaptive multi-rate (AMR) and non-AMR calls. It notes that AMR calls are more robust at lower signal levels, so using a common RLT value can cause unnecessary dropping of AMR calls. Studies showed increasing the RLT threshold for AMR calls by over 50% (e.g. from 20 to 36) reduced call drop rates by 25% while maintaining speech quality. It also recommends increasing the uplink RLT threshold by 4 frames to better protect the weaker uplink channel.
Dt parameters
Drive tests are performed to continuously monitor and optimize network performance. Key parameters measured include RxLevel, RxQuality, Frame Erasure Rate, Bit Error Rate, Carrier to Interferer ratio, and Speech Quality Index for GSM networks. For CDMA networks, parameters like RxLevel, TxPower, Carrier Energy to Interference, Carrier to Interferer ratio, and Signal to Noise Ratio are measured. Maintaining these parameters within normal ranges helps ensure quality of service and identify issues needing attention.
Sample Optimization Drivetest report
The document provides a report on MTN-Nokia MS performance in the Enugu cluster in Nigeria for February 2018. It includes summaries of key performance indicators for 2G and 3G networks, observations on areas of poor quality or coverage, and recommendations to address issues such as missing neighbors or handover problems between specific cells. Graphs and charts are also included to illustrate metrics like Rx level, Rx quality, cell IDs and throughput over time.
RF measurement and optimization Engineer EMERSON EDUARDO RODRIGUES
The document discusses various radio frequency (RF) measurement quantities used in LTE field measurements and optimization, including RSRP, RSSI, RSRQ, and SINR. It defines these terms and explains the relationships between them. For example, it describes how RSRP measures the power of a single resource element while RSSI measures power over the entire bandwidth. It also provides information on how measurement results from different tools can help with RF network optimization.
Radio Measurements in LTE
The document discusses various LTE measurement parameters and procedures including:
1. The eNB reports a list of detected PRACH preambles and measures timing advance, average RSSI, average SINR, UL CSI, and transport BLER for RRM purposes.
2. UE measurements include CQI, RSRP, and RSRQ while eNB measurements include timing advance, RSSI, SINR, UL CSI, detected preambles, and transport BLER. Inter-RAT measurements are also discussed.
3. Examples of RSRP, RSRQ, and timing advance procedures are provided along with CQI measurement details. PLMN selection, cell selection,
A New Route for Submarine Cables
This document proposes a new submarine cable route for Southeast Asia through Malaysia to provide an alternative to the congested Straits of Melaka. Currently, both shipping and submarine cables are routed through the narrow Straits, concentrating risk. The document suggests landing cables in Malaysia and establishing open cable landing stations and data centers to provide lower latency connectivity within Malaysia and to other regions by bypassing the Straits. This could attract cables seeking a more direct route and help distribute traffic by establishing optical internet exchanges in multiple Malaysian cities.
RF Planning and Optimization
This document summarizes the author's knowledge and experience with RF planning and optimization. It includes tasks performed like proposal writing, comparative analysis of technologies and vendors, and study of common problems. RF planning and optimization involves tasks like site survey, capacity and coverage planning, frequency use, interference mitigation and network evaluation. The process includes problem analysis, drive testing, simulation, and proposing solutions to improve coverage, capacity and quality while managing costs and resources.
03 150323115803-conversion-gate01
The document discusses LTE drive test and coverage analysis, including factors that influence LTE coverage, methods for identifying weak coverage areas and coverage holes, techniques for resolving issues like cross coverage and imbalance between uplink and downlink, and case studies on using drive tests to find problems and adjusting antenna parameters to improve coverage. Key aspects of LTE like reference signal power, RSRP measurement, and the differences between TDD and FDD are also explained.
20121129 lte basic procedures (2)
1) The mobile device searches for synchronization signals to detect available LTE cells and identifies key parameters like PCI from the PSS and SSS.
2) It then receives the MIB and SIBs containing configuration details to access the network from the selected cell.
3) The attach procedure is started, establishing an RRC connection and authenticating the user to activate a default bearer for IP data transmission.
Training material umts cell selection and reselection
This document summarizes the key aspects of UMTS cell selection and reselection. It describes the processes the UE goes through for PLMN selection, initial cell selection when no cell information is stored, and cell reselection when camped on a cell. It provides details on the cell selection criteria and parameters like Qqualmin, Qrxlevmin, DeltaQrxlevmin, and MaxRACHTxPwr that determine if a cell is suitable or acceptable.
topqualityvoice.pptx
Huawei provides a Voice Radar tool to evaluate voice quality from four aspects: quality, completion, accessibility, and abnormal calls. It uses key performance indicators to generate a total score on a scale of 0 to 10. The document discusses optimization solutions such as improving wireless parameters, utilizing HD voice features, and addressing network issues to improve voice quality scores.
Lte drive test parameter introduction
The document discusses 4G LTE drive testing. It describes the necessary equipment for drive testing including a notebook, GPS, and LTE dongle. It outlines key LTE radio parameters that are measured like PCI, RSRP, SINR, and MIMO. It also discusses measuring UE state information, throughput, and LTE access procedures including attach requests, random access failures, and E-RAB failures. Finally, it compares the impact of ANR capabilities versus UE capabilities on measuring neighboring cells within and between eNodeBs.
Procedure install cn510 step by step
This document provides step-by-step instructions for installing a CN510 and upgrading a Mini Link to CN510. It details pre-installation tasks like site surveys and material checks. The installation process includes fixing the CN510 and connecting power and cables. Configuration steps cover settings like the IP address, OSPF routing, and radio link parameters based on an SF6 file. Backup from the facing node and coordination with teams is also required before and after the installation.
Radio Network Design & Roll Out
This document provides an overview of radio network design for rollouts, including configuration of parameter structures, site configuration, mobility configuration, and neighbors configuration. It discusses organizing parameters into managed object classes with a hierarchical structure. Major sections cover defining radio modules and cells, antenna line configuration, frequency configuration, and adding new objects. Configuration of idle and connected mode mobility parameters and system information blocks is also addressed.
RSCP RSSI EC/NO CQI
Some clarifications on the misconceptions of EcNo and why it is not used in HSDPA Drive Test to evaluate link quality.
Day 1 LTE Technology Overview
The document discusses the need for new wireless technologies to support increasing demand for data and high-speed services. It notes that technologies need to focus on using more spectrum, improving spectral efficiency, employing smaller cell sizes like femtocells, and incentivizing off-peak traffic. The rest of the document provides details on how LTE wireless technology addresses these needs through technical specifications and network architecture, including the use of an Evolved Packet Core and separating the user and control planes.
Telecommunication basics
Telecommunication involves the transmission of information using technology. It has basic elements including a transmitter, transmission medium, and receiver. Telecommunication occurs through various channels and technologies like telephone networks, cellular networks, and the internet. Common concepts include modulation, multiplexing, circuit switching, and packet switching. Modern cellular technologies progression includes 2G, 3G, LTE, and VoLTE networks that provide improved data speeds and services. ADSL uses frequencies on copper telephone lines to provide faster internet speeds than traditional modems.
What's hot (20)
RF measurement and optimization Engineer EMERSON EDUARDO RODRIGUES
RF measurement and optimization Engineer EMERSON EDUARDO RODRIGUES
Training material umts cell selection and reselection
Training material umts cell selection and reselection
Similar to Land Mobile Radio
Coexistence or Convivence PMR-LTE Technology
Presentation given by Aitor Sanchoyerto within called technical seminars: The future of telecommunications networks emergency.
Cellular charles
The document provides information about cellular networks and technologies. It discusses how cellular networks use cells served by base stations to provide radio coverage over a wide area. This allows many portable transceivers like mobile phones to communicate through the network. It then describes some key components of cellular networks like base stations, mobile switching offices, and mobile devices. The document also summarizes different cellular network access technologies including AMPS, TDMA, and CDMA.
Unit 1
This document discusses mobile computing and its applications and limitations. It provides an overview of mobile computing as enabling access to network services anywhere and anytime using mobile and wireless devices. It describes various applications of mobile computing in vehicles, emergencies, business, and replacing wired networks. The document also outlines limitations of mobile computing like resource constraints, interference, bandwidth issues, and security constraints. It includes a simplified reference model of the protocol stack in mobile systems and provides an overview of GSM services, system architecture, protocols, localization, calling, handover and security.
Applications of communication system
This is all about various Communication systems and it's applications. That how it is use full for us in many aspects.
4g Mobile Communication Technology
Mobile communication has undergone several generations of technology. First generation used analog FM technology, while second generation used GMSK modulation. 3G systems aimed for higher bandwidth and efficiency using TDD and no backward compatibility. 4G focuses on universal access through wireless and wireline networks using highly efficient spectrum. Key challenges for 4G include supporting diverse services, terminal mobility, security flexibility for heterogeneous networks, and providing enhanced capabilities like ground guidance for military applications.
Mobile and wireless computing
Mobile computing allows users to access information and computing resources anywhere without being restricted to a fixed location. It utilizes wireless technologies like cellular networks, WiFi, and satellites to connect devices. Common mobile devices include laptops, tablets, and phones. Mobile computing enables various applications in fields like healthcare, retail, and travel. However, it faces challenges from limited bandwidth, security issues, device power consumption, and potential health effects of wireless transmissions.
Mobile ad-hoc network [autosaved]
This document discusses mobile ad-hoc networks (MANETs). It defines MANETs as wireless infrastructureless networks where each node is willing to forward data for other nodes. The document outlines the history of MANETs including early packet radio networks. It describes key features like multi-hop routing and the ability for nodes to join or leave the network dynamically. Examples applications discussed include military, disaster recovery, and sensor networks. Finally, the document notes limitations of MANETs such as bandwidth constraints, energy limitations, and security issues.
Lan, man and wan ppt final
A computer network connects autonomous computers that can exchange information. A local area network (LAN) connects computers within a small geographic area like a building using technologies like Ethernet. A metropolitan area network (MAN) extends across a city using technologies like fiber optics. A wide area network (WAN) connects computers across large geographic areas like countries using technologies like leased lines.
Vip bsnl.ppt1
This document provides an overview of telecommunication services from Bharat Sanchar Nigam Limited (BSNL) in India. It discusses BSNL's background and market share. It also summarizes leased lines, managed leased line networks, wireless technologies including GSM, UMTS, LTE, and call forwarding services.
MIMO-OFDM WIRELESS COMMUNICATION SYSTEM PERFORMANCE ANALYSIS FOR CHANNEL ESTI...
This document provides an overview of MIMO-OFDM wireless communication systems and reviews previous research on channel estimation techniques for these systems. It begins with background sections on MIMO, OFDM, and MIMO-OFDM systems. It then summarizes several previous research papers that studied channel estimation methods like LS, MMSE, LMS, and neural networks for MIMO-OFDM. Overall, the document finds that techniques like MMSE and modified LMS algorithms provide better channel estimation performance than LS, improving metrics like SNR, BER, and capacity. The review shows that MIMO-OFDM is widely used due to its ability to increase data rates and link reliability compared to traditional systems.
mobile computing and ad hoc network
Mobile computing devices can be categorized as display-only devices, info pad models with limited processing, laptop computers, and personal digital assistants (PDAs). Mobile stations in a mobile network comprise the user equipment and software needed for communication. A GSM network consists of mobile stations, the base station subsystem including base transceiver stations (BTS) and base station controllers (BSC), and the network switching subsystem including mobile switching centers (MSCs) and databases. Mobile stations contain a mobile equipment component and a subscriber identity module (SIM) card. Ad hoc networks allow wireless nodes to connect and communicate without a preexisting infrastructure by forming a temporary network.
IT6601 MOBILE COMPUTING UNIT1
IT6601 MOBILE COMPUTING UNITI
INTRODUCTION
Mobile Computing – Mobile Computing Vs wireless Networking – Mobile Computing Applications – Characteristics of Mobile computing – Structure of Mobile Computing Application. MAC Protocols – Wireless MAC Issues – Fixed Assignment Schemes – Random Assignment Schemes – Reservation Based Schemes.
Presentation on Wireless devices
The document provides information about various wireless technologies including Bluetooth, Infrared, Wi-Fi, GSM, and GPRS. It discusses the advantages and disadvantages of each technology. Bluetooth allows for short range wireless data transfer between devices at low power. Infrared also enables short range communication but has slower speeds and can be impacted by environmental factors. Wi-Fi provides wireless internet access over local areas and has benefits of mobility, convenience and low installation costs compared to wired networks. GSM is a cellular standard that offers worldwide voice and data connectivity across mobile networks. GPRS extends GSM to enable packet-based mobile data services including basic internet access.
Lanmanandwanpptfinal 131121041622-phpapp02
A computer network connects two or more computers so they can exchange information. A network can be a local area network (LAN) spanning a single room or campus using cables, a metropolitan area network (MAN) extending across a city, or a wide area network (WAN) connecting locations over long distances. LANs have high speeds up to gigabits, cover distances up to 10 km, and share resources locally at low cost. MANs and WANs use both guided and unguided media to interconnect over larger ranges of up to 100 km and beyond, but are more expensive to implement and maintain over a large geographical area.
10700119013_abir.pptx
This document provides an overview of mobile computing technologies including GSM, GPRS, CDMA, and WLANs. It discusses the objectives and history of GSM and describes its architecture and evolution. Key features of GPRS are outlined including its use of packet data networks. The document also summarizes CDMA technology, highlighting its use of code division multiple access. Advantages and disadvantages of WLANs are presented. Finally, the document defines global mobile satellite systems and discusses their benefits and drawbacks for communication.
Computer and it's all type of network.pptx
It's helps to the students in the study of computer and it's main topic
Wireless communication technologies
Wireless communication technologies allow for mobility and flexibility through radio signals rather than wired connections. They include technologies like Bluetooth, WiFi, wireless LANs and MANs that enable applications such as video conferencing, telemedicine, and distance learning. Common wireless standards are IEEE 802.11 for WiFi and IEEE 802.16 for WiMax. Wireless networks face challenges of limited spectrum availability, lower bandwidth and higher delays compared to wired networks. Emerging wireless technologies are expanding connectivity and access to services for more users.
Generating Insights
The document compares licensed versus unlicensed spectrum for wireless communication in smart grids. It notes that unlicensed spectrum is free but crowded, limiting signal strength and requiring more infrastructure. Licensed spectrum is scarce but provides exclusive usage rights, allowing stronger signals over longer distances with less infrastructure. The Sensus FlexNet system uses licensed spectrum to create wireless networks for utilities that cover large areas with minimal infrastructure requirements. Going forward, spectrum needs will expand as utilities require more advanced and secure communications networks.
Wireless lan
The document discusses wireless local area networks (WLANs) and their advantages over wired networks, including mobility, ease of installation, flexibility, and reduced costs. It describes various WLAN configurations including peer-to-peer networks, client/access point networks, and networks using multiple access points or extension points. The document also covers WLAN standards, hardware components, connection processes, capacity, and technologies used including spread spectrum techniques like direct sequence spread spectrum (DSSS) and frequency hopping spread spectrum (FHSS).
Keith Nolan - Use Of Cognitive Radio To Improve Spectrum Usage Efficiency And...
Keith Nolan - spectrum, regulatory, technical and market issues surrounding the use of cognitive radio to improve spectrum usage efficiency and data capacity, IEEE VTS UKRI meeting, July 2012, Dublin, Ireland
Similar to Land Mobile Radio (20)
MIMO-OFDM WIRELESS COMMUNICATION SYSTEM PERFORMANCE ANALYSIS FOR CHANNEL ESTI...
MIMO-OFDM WIRELESS COMMUNICATION SYSTEM PERFORMANCE ANALYSIS FOR CHANNEL ESTI...
Keith Nolan - Use Of Cognitive Radio To Improve Spectrum Usage Efficiency And...
Keith Nolan - Use Of Cognitive Radio To Improve Spectrum Usage Efficiency And...
Recently uploaded
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Software Engineering and Project Management - Software Testing + Agile Method...
Software Testing: A Strategic Approach to Software Testing, Strategic Issues, Test Strategies for Conventional Software, Test Strategies for Object -Oriented Software, Validation Testing, System Testing, The Art of Debugging.
Agile Methodology: Before Agile – Waterfall, Agile Development.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Recently uploaded (20)
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Software Engineering and Project Management - Software Testing + Agile Method...
Software Engineering and Project Management - Software Testing + Agile Method...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
Land Mobile Radio
- 2. Introduction Land Mobile Radio Technology is a vital communication tool for public safety and other industries. This presentation will discuss the benefits and advancements of LMR technology and its impact on communication and safety.
- 4. Working
- 5. E plaination Handheld portable radios are carried by public safety personnel and tend to have a limited transmission range. Mobile radios are often located in vehicles and use the vehicle’s power supply and a larger antenna, providing a greater transmission range than handheld portable radios. Base station radios are located in fixed positions, such as public safety answering points or dispatch centers , and tend to have the most powerful transmitters. A network is required to connect the different base stations to the same communications system. Repeaters are used to increase the effective communications range of handheld portable radios, mobile radios, and base station radios by retransmitting received radio signals
- 6. Advantages of LMR Reliable communication Enhanced security Efficient useof spectrum Flexiblecommunication Customizable reliable communication even in areas with poor network coverage. encryption, which prevents unauthorized access to the communication. LMR systems can be used for both voice and data communication LMR systems use a dedicated spectrum band, which is allocated specifically for the use of LMR systems. customized to meet the specific needs of different industries, such as public safety, transportation, and utilities.
- 7. Disadvantages of LMR Limited coverage High cost Limited data capacity Limited interoperability Limited scalability primarily designed for voice communication LMR systems can be expensive to install and maintain The coverage area of an LMR system is limited by the power of the transmitter and the height of the antenna Different LMR systems may use different protocols, making it difficult to achieve interoperability between different systems. making it difficult to expand the system to accommodate new users or additional coverage areas.
- 8. Applications • Transportation for air traffic control, train dispatch, and ship- to-shore communication • Construction and Manufacturing Between workers on job sites and control centers. push-to-talk, group communication, and GPS tracking, • Public Safety Used by police ,fire and emergency medical services. voice encryption, priority access, and emergency signaling.
- 9. LMR Future • Integration with LTE: provide broadband data services and enhance interoperability. • Artificial Intelligence (AI) and Machine Learning (ML):AI-based LMR systems will be able to self-diagnose and self-heal, reducing the need for manual intervention and minimizing downtime. • Enhanced Security:Encryption, authentication, and other security measures will become standard features in LMR devices.
- 10. Conclusion Land Mobile Radio technology is a critical communication tool for public safety and other industries. Its advantages include instant communication, reliable coverage, and the ability to operate in remote areas. As LMR technology continues to evolve, it will continue to enhance communication and safety for users.
- 12. Thanks!