This document describes an IoT-based water quality monitoring and control system. The system uses sensors to monitor the pH, turbidity, water level, flow rate, and detects object intrusions in a water tank. It uses an Arduino board to collect sensor data and an ESP8266 module to transmit data via MQTT. If sensor values exceed thresholds, the system automatically closes solenoid valves to prevent use of poor quality water. It allows users to view sensor readings and alerts through an MQTT app. The system aims to ensure a safe water supply by monitoring quality in real-time and controlling access based on sensor values.
Low Cost Design of Water Quality Monitoring Systemijtsrd
According to the annual rankings of world economic forum, the issue related with quality of water has increased gradually. As per the records, millions of people especially small children die due to the bad quality of water. One of the main reasons is the unavailability of cheap water quality monitoring system available at such locations. Thus, to ensure the safety of people considering water quality, a low cost design for monitoring water quality has been proposed in this paper. The system uses microcontroller, display LCD, etc. whereas the various parameters considered includes pH, turbidity, TDS and temperature of sample water. The proposed design ensures the low cost factor of the system along with displaying the quality of water. Raghav Arora | Sahil Mehta "Low Cost Design of Water Quality Monitoring System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd32913.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/32913/low-cost-design-of-water-quality-monitoring-system/raghav-arora
Low Cost Design of Water Quality Monitoring Systemijtsrd
According to the annual rankings of world economic forum, the issue related with quality of water has increased gradually. As per the records, millions of people especially small children die due to the bad quality of water. One of the main reasons is the unavailability of cheap water quality monitoring system available at such locations. Thus, to ensure the safety of people considering water quality, a low cost design for monitoring water quality has been proposed in this paper. The system uses microcontroller, display LCD, etc. whereas the various parameters considered includes pH, turbidity, TDS and temperature of sample water. The proposed design ensures the low cost factor of the system along with displaying the quality of water. Raghav Arora | Sahil Mehta "Low Cost Design of Water Quality Monitoring System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd32913.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/32913/low-cost-design-of-water-quality-monitoring-system/raghav-arora
Implementation of Internet of Things for Water Quality Monitoringijtsrd
To make sure the safe supply of the drinking water the quality of the water needs to be monitored. As the monitoring of the water parameter is a complex process as it has been going through several laboratory testing processes and though it is time consuming. The system for monitoring the water quality in the Internet of Things IoT consists of a number of sensors which are used for measuring the parameters of the water these parameters are temperature, pH, turbidity, and CO2 of the water. The measured values of the parameter from the sensors can be processed by Arduino pro mini microcontroller which can be used as a core controller. System focus on continuous monitoring of water in the IOT platform. Internet of things is the network of physical objects embedded with electronics, sensors, software, and network connectivity. Monitoring water parameter can be done from anywhere as a central office using thinger.io which is an open source IoT platform as free server data can be continuously pushed on the cloud so we can see data in real time operation. Sensors are connected with the Arduino pro mini and this can send the parameter value to the Wi Fi module ESP8266 which require internet for sending this parameter values to thinger.io from the thinger.io anyone can see the real time values of the water parameter and these values are also shown on the LCD16×2 screen which is connected to the microcontroller. Priya S. Bhagat | Dr. Vijay S. Gulhane | Prof. Tanuj S. Rohankar ""Implementation of Internet of Things for Water Quality Monitoring"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23655.pdf
Paper URL: https://www.ijtsrd.com/engineering/information-technology/23655/implementation-of-internet-of-things-for-water-quality-monitoring/priya-s-bhagat
IoT Based Detection of Leakages in Gas Pipesijtsrd
In industries leakage of Gas in the pipeline is a major issue nowadays. Leakage is defined as the accidental admission or escape of fluid through a hole or crack from the pipe. Gas leakages lead to losses as well as fire accidents. This project takes the control over automatic detection of leakages than the man power and thus reduce loss. Here we propose an inventive robot that clings on to the outer surface of the gas pipe and moves along the pipe to check for leakages. The kit consists of MQ5 gas sensor to detect the gas leakages. The robot moves continuously along the metal pipe, if there any presence of leakage the particular position is sensed by ultrasonic sensor and the message is send to the IOT through Wi Fi module. P. Anitha | K. Saranya ""IoT Based Detection of Leakages in Gas Pipes"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23722.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23722/iot-based-detection-of-leakages-in-gas-pipes/p-anitha
In recent years, many of the bridges are monitored using non-destructive testing methods. These methods are used for checking the structural damage, wreckage, strength of the bridges. To reduce the human losses, economic losses, protect the strength and structure of bridge we are introducing a smart bridge monitoring using sensors where it gives high and low values depending upon the problem occurred in the bridge. Now a day we are in hike of power supply, so we are using Wireless Sensor Networks (WSN) technology for regular monitoring of the bridge which consumes less power with accurate values. This project describes the real time working and getting real time values. Outcome of the project is to bring a product based module. R. Dhivya Devi | S. Dinesh | S. Gowri Shankar | K. Ravi Teja"Pontem Monitoring using IoT" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11517.pdf http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11517/pontem-monitoring-using-iot/r-dhivya-devi
Automatic water level monitoring and control system using IoTDanish Mehraj
This is the documentation for making Automatic water level monitoring and control system using Internet of Thimgs (IoT) which will help is to save water and removes the efforts to take care of watering u[ the tanks in homes and offices.
Implementation of Internet of Things for Water Quality Monitoringijtsrd
To make sure the safe supply of the drinking water the quality of the water needs to be monitored. As the monitoring of the water parameter is a complex process as it has been going through several laboratory testing processes and though it is time consuming. The system for monitoring the water quality in the Internet of Things IoT consists of a number of sensors which are used for measuring the parameters of the water these parameters are temperature, pH, turbidity, and CO2 of the water. The measured values of the parameter from the sensors can be processed by Arduino pro mini microcontroller which can be used as a core controller. System focus on continuous monitoring of water in the IOT platform. Internet of things is the network of physical objects embedded with electronics, sensors, software, and network connectivity. Monitoring water parameter can be done from anywhere as a central office using thinger.io which is an open source IoT platform as free server data can be continuously pushed on the cloud so we can see data in real time operation. Sensors are connected with the Arduino pro mini and this can send the parameter value to the Wi Fi module ESP8266 which require internet for sending this parameter values to thinger.io from the thinger.io anyone can see the real time values of the water parameter and these values are also shown on the LCD16×2 screen which is connected to the microcontroller. Priya S. Bhagat | Dr. Vijay S. Gulhane | Prof. Tanuj S. Rohankar ""Implementation of Internet of Things for Water Quality Monitoring"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23655.pdf
Paper URL: https://www.ijtsrd.com/engineering/information-technology/23655/implementation-of-internet-of-things-for-water-quality-monitoring/priya-s-bhagat
IoT Based Detection of Leakages in Gas Pipesijtsrd
In industries leakage of Gas in the pipeline is a major issue nowadays. Leakage is defined as the accidental admission or escape of fluid through a hole or crack from the pipe. Gas leakages lead to losses as well as fire accidents. This project takes the control over automatic detection of leakages than the man power and thus reduce loss. Here we propose an inventive robot that clings on to the outer surface of the gas pipe and moves along the pipe to check for leakages. The kit consists of MQ5 gas sensor to detect the gas leakages. The robot moves continuously along the metal pipe, if there any presence of leakage the particular position is sensed by ultrasonic sensor and the message is send to the IOT through Wi Fi module. P. Anitha | K. Saranya ""IoT Based Detection of Leakages in Gas Pipes"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23722.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23722/iot-based-detection-of-leakages-in-gas-pipes/p-anitha
In recent years, many of the bridges are monitored using non-destructive testing methods. These methods are used for checking the structural damage, wreckage, strength of the bridges. To reduce the human losses, economic losses, protect the strength and structure of bridge we are introducing a smart bridge monitoring using sensors where it gives high and low values depending upon the problem occurred in the bridge. Now a day we are in hike of power supply, so we are using Wireless Sensor Networks (WSN) technology for regular monitoring of the bridge which consumes less power with accurate values. This project describes the real time working and getting real time values. Outcome of the project is to bring a product based module. R. Dhivya Devi | S. Dinesh | S. Gowri Shankar | K. Ravi Teja"Pontem Monitoring using IoT" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11517.pdf http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11517/pontem-monitoring-using-iot/r-dhivya-devi
Automatic water level monitoring and control system using IoTDanish Mehraj
This is the documentation for making Automatic water level monitoring and control system using Internet of Thimgs (IoT) which will help is to save water and removes the efforts to take care of watering u[ the tanks in homes and offices.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.