Evaluating the Arc-Flash Protection Benefits of IEC 61850 CommunicationSchneider Electric
The goal of arc-flash protection is to minimize the damaging effects of released energy, which requires very fast and reliable communication among protection system components. In addition to discussing communication requirements and options for sensors, current transformers, relays, circuit breakers, and upper level control systems, this paper introduces and evaluates the benefits and drawbacks of new IEC 61850-based communication options.
Design and Detection of Underground Cable Fault Using Raspberry Pi and IoT Sy...ijtsrd
This paper proposes fault location model for underground power cable using raspberry pi and the Internet of Things which is based on the internet, which means the information will be transferred through the internet access. The aim of this method is to determine the distance of underground cable fault from base station in kilometres and also find the location of that faulty place. This paper uses the simple concept of Current Transformer Theory CT Theory . When any fault like short circuit occurs, voltage drop will vary depending on the length of fault in cable since the current varies Current Transformer is used to calculate the varying current. The signal conditioner manipulates the change in voltage and a microcontroller is used to make the necessary calculations so that the fault distance is displayed by IOT devices. These fault details are after sent to any access point through the internet and displayed. Mr. M. Dinesh | Mr. K. Vairaperumal | Mr. P. Senthilkumar "Design and Detection of Underground Cable Fault Using Raspberry Pi & IoT System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-1 , December 2018, URL: http://www.ijtsrd.com/papers/ijtsrd19037.pdf Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/19037/design-and-detection-of-underground-cable-fault-using-raspberry-pi-and-iot-system/mr-m-dinesh
IOT BASED POWER GRID MONITORING & CONTROL SYSTEMvivatechijri
Energy generation corporations provide electricity to any or all the households via intermediate controlled power transmission hubs referred to as Electricity Grid. Generally issues arise thanks to failure of the electricity grid resulting in black out of a complete space that was obtaining provide from that individual grid. This project aims to resolve this downside victimization IOT because the means that of communication and conjointly coping with numerous alternative problems that a wise system will traumatize to avoid needless losses to the Energy producers.
Minimization of the dc component in transformerless three phase grid-connecte...LeMeniz Infotech
Minimization of the dc component in transformerless three phase grid-connected photovoltaic inverters
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Evaluating the Arc-Flash Protection Benefits of IEC 61850 CommunicationSchneider Electric
The goal of arc-flash protection is to minimize the damaging effects of released energy, which requires very fast and reliable communication among protection system components. In addition to discussing communication requirements and options for sensors, current transformers, relays, circuit breakers, and upper level control systems, this paper introduces and evaluates the benefits and drawbacks of new IEC 61850-based communication options.
Design and Detection of Underground Cable Fault Using Raspberry Pi and IoT Sy...ijtsrd
This paper proposes fault location model for underground power cable using raspberry pi and the Internet of Things which is based on the internet, which means the information will be transferred through the internet access. The aim of this method is to determine the distance of underground cable fault from base station in kilometres and also find the location of that faulty place. This paper uses the simple concept of Current Transformer Theory CT Theory . When any fault like short circuit occurs, voltage drop will vary depending on the length of fault in cable since the current varies Current Transformer is used to calculate the varying current. The signal conditioner manipulates the change in voltage and a microcontroller is used to make the necessary calculations so that the fault distance is displayed by IOT devices. These fault details are after sent to any access point through the internet and displayed. Mr. M. Dinesh | Mr. K. Vairaperumal | Mr. P. Senthilkumar "Design and Detection of Underground Cable Fault Using Raspberry Pi & IoT System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-1 , December 2018, URL: http://www.ijtsrd.com/papers/ijtsrd19037.pdf Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/19037/design-and-detection-of-underground-cable-fault-using-raspberry-pi-and-iot-system/mr-m-dinesh
IOT BASED POWER GRID MONITORING & CONTROL SYSTEMvivatechijri
Energy generation corporations provide electricity to any or all the households via intermediate controlled power transmission hubs referred to as Electricity Grid. Generally issues arise thanks to failure of the electricity grid resulting in black out of a complete space that was obtaining provide from that individual grid. This project aims to resolve this downside victimization IOT because the means that of communication and conjointly coping with numerous alternative problems that a wise system will traumatize to avoid needless losses to the Energy producers.
Minimization of the dc component in transformerless three phase grid-connecte...LeMeniz Infotech
Minimization of the dc component in transformerless three phase grid-connected photovoltaic inverters
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Automatic Fault Detection System with IOT BasedYogeshIJTSRD
The fault location is an important part for any transmission line and distribution system. The location of fault is difficult task sometimes it takes lot of times needed for the exact location of the fault. The exact fault location can help the service man to overcome the fault free system in very less time. In this paper we are able to detect the fault range in easy way using the ESP module and the message is transferred on the mobile. This project is cost effective and reliable. Fast fault detection provide the protection of equipment before any significant damage. Er. Sanjeev Kumar | Mohd Mehraj Khan | Nadeem | Shailesh Kumar Yadav | Harsh Gupta "Automatic Fault Detection System with IOT Based" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd43806.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/43806/automatic-fault-detection-system-with-iot-based/er-sanjeev-kumar
Here my project theme is to monitor and control Transformer health using Arduino, as we all know there are both internal and external faults occur in the transformer, for internal faults we use Buchholz relay and Differential protection relay for external but it is not efficient with time. so,we use Arduino for real time protection, here we fix some values to the Arduino in the program itself according to the rating of the transformer by that we monitor and control whenever the faults occur
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.