The major disadvantages of using independent renewable energy resources are that unavailability of power for all time. For overcoming this we use solar and wind energy together.
Rural electrification through solar and wind hybrid systemnissy marla
The aim of this work is design and implementation of a Hybrid power generation system using wind energy photovoltaic solar energy- solar energy with Nano-antenna for continuous (24*7) power generation.
With state-of-the-art hybrid technology that comes in the form of SolarMill that efficiently utilizes the potential of wind and sun energy in any climatic conditions, minimizing your carbon footprint becomes to breeze
Hybrid power generation by and solar –windUday Wankar
With the development of industry and
agriculture, a great amount of energy such as coal, oil
and gas has been consumed in the world. Extensive
use of these fossil energies deteriorates a series of
problems like energy crisis, environmental pollution
and so on. Everybody knows that the fossil energy
reserves are finite, some day it will be exhausted.
It is possible that the world will face a
global energy crisis due to a decline in the
availability of cheap oil and recommendations to a
decreasing dependency on fossil fuel. This has led to
increasing interest in alternate power/fuel research
such as fuel cell technology, hydrogen fuel, biodiesel,
Karrick process, solar energy, geothermal energy,
tidal energy and wind. Today, solar energy and wind
energy have significantly alternated fossil fuel with
big ecological problems.
With the development of the science and
technology, power generation using solar energy and
wind power is gradually known by more and more
people. And it is widespread used in many developed
countries. The merits of the solar and wind power
generation are very obvious-infinite and nonpolluting.
The raw materials of the solar and wind
power generation derived from nature, and wind
power generation can work twenty-four hours a day,
solar power generation only works by daylight. In
addition, this kind of power generation has no
exhaust emission and there is no influence to the
nature. But it also has some shortcomings. Because
of the imperfect of the technology, equipment of the
solar and wind power generation is very expensive.
By far, it cannot be widely used.
In addition, solar and wind power
generation system affected by the changing of the
weather very much, so it has obvious defects in
reliability compared with fossil fuel, and it is difficult
to make it fit for practical use the lack of economical
efficiency .Because of these problems it needs to
increase the reliability of energy supply by
developing a system which interacts Solar and wind
energy. This kind of system is usually called windsolar
hybrid power generation system significantly
Hybrid solar wind power generation systemHemanth Duru
A simple introduction to Hybrid solar wind power generation System.In this system we use both wind and solar power generation devices.Here wind turbine is inter connected with solar panel.so that it can generate power in both ways.It gives power in night time and works efficiently.As per availability of sun rise and wind it can generate power.The power generated is given to the load.Its efficiency is high and eco-friendly.
Hybrid Power System is the integration of number of generating plants those are working together serve a particular region. They may be off grid or may not be.
HYBRID POWER GENERATION SYSTEM From KMP CollegeHIGHVOLTEEE
Today, the world is progressing at quite a fast rate with the use of the conventional sources of energy. The two major demerits of using them are the environmental pollution created by its use and its limited quantity.
On the other hand the Non-conventional sources of energy are available in plenty, free of cost and pollution free.
Many types of clean and renewable energy sources can be used in the production of electrical energy.
Renewable energy sources i.e.,energy generated from solar, wind, biomass, hydropower , geothermal and ocean resources are considered as a technological option for generating clean energy. But the energy generated from solar and wind is much less than the production by fossil fuels, however, electricity generation by utilizing PV
cells and wind turbine increased rapidly in recent years.
Hybrid wind-solar Power generation systemShivam Joshi
This project is basically based on power generation with help of wind as well as solar equipments. This we call it as Hybrid stucture of solar and wind. The presentation contains all the baci information required to undestand this new innovative concept. For more information you can contact me. I woll get back to you as soon as possible. Thanks you. Hope its helpfull :)
Rural electrification through solar and wind hybrid systemnissy marla
The aim of this work is design and implementation of a Hybrid power generation system using wind energy photovoltaic solar energy- solar energy with Nano-antenna for continuous (24*7) power generation.
With state-of-the-art hybrid technology that comes in the form of SolarMill that efficiently utilizes the potential of wind and sun energy in any climatic conditions, minimizing your carbon footprint becomes to breeze
Hybrid power generation by and solar –windUday Wankar
With the development of industry and
agriculture, a great amount of energy such as coal, oil
and gas has been consumed in the world. Extensive
use of these fossil energies deteriorates a series of
problems like energy crisis, environmental pollution
and so on. Everybody knows that the fossil energy
reserves are finite, some day it will be exhausted.
It is possible that the world will face a
global energy crisis due to a decline in the
availability of cheap oil and recommendations to a
decreasing dependency on fossil fuel. This has led to
increasing interest in alternate power/fuel research
such as fuel cell technology, hydrogen fuel, biodiesel,
Karrick process, solar energy, geothermal energy,
tidal energy and wind. Today, solar energy and wind
energy have significantly alternated fossil fuel with
big ecological problems.
With the development of the science and
technology, power generation using solar energy and
wind power is gradually known by more and more
people. And it is widespread used in many developed
countries. The merits of the solar and wind power
generation are very obvious-infinite and nonpolluting.
The raw materials of the solar and wind
power generation derived from nature, and wind
power generation can work twenty-four hours a day,
solar power generation only works by daylight. In
addition, this kind of power generation has no
exhaust emission and there is no influence to the
nature. But it also has some shortcomings. Because
of the imperfect of the technology, equipment of the
solar and wind power generation is very expensive.
By far, it cannot be widely used.
In addition, solar and wind power
generation system affected by the changing of the
weather very much, so it has obvious defects in
reliability compared with fossil fuel, and it is difficult
to make it fit for practical use the lack of economical
efficiency .Because of these problems it needs to
increase the reliability of energy supply by
developing a system which interacts Solar and wind
energy. This kind of system is usually called windsolar
hybrid power generation system significantly
Hybrid solar wind power generation systemHemanth Duru
A simple introduction to Hybrid solar wind power generation System.In this system we use both wind and solar power generation devices.Here wind turbine is inter connected with solar panel.so that it can generate power in both ways.It gives power in night time and works efficiently.As per availability of sun rise and wind it can generate power.The power generated is given to the load.Its efficiency is high and eco-friendly.
Hybrid Power System is the integration of number of generating plants those are working together serve a particular region. They may be off grid or may not be.
HYBRID POWER GENERATION SYSTEM From KMP CollegeHIGHVOLTEEE
Today, the world is progressing at quite a fast rate with the use of the conventional sources of energy. The two major demerits of using them are the environmental pollution created by its use and its limited quantity.
On the other hand the Non-conventional sources of energy are available in plenty, free of cost and pollution free.
Many types of clean and renewable energy sources can be used in the production of electrical energy.
Renewable energy sources i.e.,energy generated from solar, wind, biomass, hydropower , geothermal and ocean resources are considered as a technological option for generating clean energy. But the energy generated from solar and wind is much less than the production by fossil fuels, however, electricity generation by utilizing PV
cells and wind turbine increased rapidly in recent years.
Hybrid wind-solar Power generation systemShivam Joshi
This project is basically based on power generation with help of wind as well as solar equipments. This we call it as Hybrid stucture of solar and wind. The presentation contains all the baci information required to undestand this new innovative concept. For more information you can contact me. I woll get back to you as soon as possible. Thanks you. Hope its helpfull :)
Lclr filter design and modelling for harmonic mitigation in interconnected mi...eSAT Journals
Abstract Today many people are attracted towards distribution generation (DG) because of low energy cost power supply, local generation, highly reliable system, supply with good power quality. Increasing attention and investment in renewable energy that is DG energy sources give rise to rapid development of high penetration renewable energy sources like solar energy, wind energy, hydro energy. Out of this most important and best is the solar energy. There are multiple ways to interface PV arrays with the power grid, but in there is problem of power quality. Today’s important concern of the power system is the power quality in case of renewable energy sources. The power quality improvement in the interconnected micro grid systems and grid interconnection with Distribution Generation (DGs) is the challenging task and to overcome the power quality problem passive filters are the best and cost effective solution. In this paper the LCLR filter is implemented between inverter and grid. The complete system consists of photovoltaic cell (PV), DC-DC boost converter, DC-AC inverter, LCLR filter and the grid. This paper also consists of complete MATLAB simulation of PV cell, DC-DC boost converter and inverter with LCLR filter. Key Words: Renewable energy, PV module, DC-DC boost converter, DGs, LCLR filter, power quality, micro grid (MG) and THD
Wind power forecasting an application of machineJawad Khan
The advancement in renewable energy sector being the focus of research these days, a novel neuro evolutionary technique is proposed for modeling wind power forecasters.
The work uses the robust technique of
Cartesian Genetic Programming to evolve ANN
for development of forecasting models.
These Models predicts power generation of a wind based power plant from a single hour up to a year - taking a big lead over other proposed models by reducing its MAPE to minimum values for a single day hourly prediction.
Results when compared with other models in the literature demonstrated that the proposed models are among the best estimators of wind based power generation plants proposed to date.
With the development of industry and
agriculture, a great amount of energy such as coal, oil
and gas has been consumed in the world. Extensive
use of these fossil energies deteriorates a series of
problems like energy crisis, environmental pollution
and so on. Everybody knows that the fossil energy
reserves are finite, some day it will be exhausted.
It is possible that the world will face a
global energy crisis due to a decline in the
availability of cheap oil and recommendations to a
decreasing dependency on fossil fuel. This has led to
increasing interest in alternate power/fuel research
such as fuel cell technology, hydrogen fuel, biodiesel,
Karrick process, solar energy, geothermal energy,
tidal energy and wind. Today, solar energy and wind
energy have significantly alternated fossil fuel with
big ecological problems.
With the development of the science and
technology, power generation using solar energy and
wind power is gradually known by more and more
people. And it is widespread used in many developed
countries. The merits of the solar and wind power
generation are very obvious-infinite and nonpolluting.
The raw materials of the solar and wind
power generation derived from nature, and wind
power generation can work twenty-four hours a day,
solar power generation only works by daylight. In
addition, this kind of power generation has no
exhaust emission and there is no influence to the
nature. But it also has some shortcomings. Because
of the imperfect of the technology, equipment of the
solar and wind power generation is very expensive.
By far, it cannot be widely used.
In addition, solar and wind power
generation system affected by the changing of the
weather very much, so it has obvious defects in
reliability compared with fossil fuel, and it is difficult
to make it fit for practical use the lack of economical
efficiency .Because of these problems it needs to
increase the reliability of energy supply by
developing a system which interacts Solar and wind
energy. This kind of system is usually called windsolar
hybrid power generation system significantly
Novel technique for hybrid electric vehicle presentation 1Manish Sadhu
Problem Summary:
Higher demand of current results an important heating of the battery, this heating will generate several consequences, firstly a reduction of lifespan of the battery and secondly a significant loss of capacity. Supercapacitors are used in series with a power battery to provide power requirement in transient state. An energy battery is placed in parallel, this battery gives the power in steady state.
Detailed Description Problem:
Modern batteries (e.g., Li-ion batteries) provide high discharge efficiency, but the rate capacity effect in these batteries drastically decreases the discharge efficiency as the load current increases. Electric double layer capacitors, or simply supercapacitors, have extremely low internal resistance, and a battery-supercapacitor hybrid may mitigate the rate capacity effect for high pulsed discharging current. However, a hybrid architecture comprising a simple parallel connection does not perform well when the supercapacitor capacity is small, which is a typical situation because of the low energy density and high cost of supercapacitors. A new battery-supercapacitor hybrid system that employs a constant-current charger. The constant current charger isolates the battery from supercapacitor to improve the end-to-end efficiency for energy from the battery to the load while accounting for the rate capacity effect of Li-ion batteries and the conversion efficiencies of the converters.
Excepted Outcome:
The supercapacitor will take an important part for the improvement of the energetic efficiency of the embarked systems and in the reduction of batteries replacement. Supercapacitor increases the performance motor at accelerated and reaccelerated mode. Also increases the life span of the battery. Indeed the supercapacitors will not be used as source of pure energy, because of their weak energy mass, but rather of complement to the battery, providing the strong demands of power. The supercapacitor solution as source of power is clearly interesting; however the cost of the kilowatt per hour remains higher than for the batteries lead-acid (approximately 30 times more) but with a weight and volume weaker.
Other Description:
Supercapacitors are widely used for energy storage in various applications. Specifically, supercapacitors are gaining more attention as energy storage elements for renewable energy sources which tend to have a high charge-discharge cycle frequency, and demand high cycle efficiency and good
Depth-of-discharge(DOD) properties. There are several related battery-supercapacitor hybrid architectures in the literature on hybrid electric vehicles (HEVs). A bidirectional converter-based approach is introduced for the regenerative brake-equipped HEVs. A DC bus-based architecture for the battery-supercapacitor hybrid system is described in. However, it is difficult to directly apply these architectures to portable applications because they are designed for the HEV which involves high-power op
Wireless charging using electromagnetic induction, and resonance magnetic coupling. Effects and limitations, cheallenges faced and meathods to overcome. Success Case study. References included.
Microgrids, Electric Vehicles and Wireless ChargingJeffrey Funk
These slides use concepts from my (Jeff Funk) course entitled analyzing hi-tech opportunities to analyze how electric vehicles will become economic feasible if the right design decisions are made to benefit from the falling costs of electronics. One key decision is the use of micro-grids to enable direct charging of the batteries, which is more efficient. A second key decision is the number of recharging stations and thus the frequency by which users can recharge their vehicles. More frequent recharging means smaller batteries can be used and thus the slow rate of improvements for energy storage densities can be overcome. A third key decision is wired vs. wireless charging. Wireless charging eliminates the time consuming maintenance and fitting problems of wires and thus enables faster hookups. It also benefits from the rapidly falling cost of electronics; the falling cost of ICs, power electronics, and thin-film coils means that wireless charging is likely to become economically feasible in the near future and allow the problem of low energy storage densities of batteries to be solved.
One of the primary needs for socio-economic development in any nation in the world is the provision of reliable electricity supply systems with lower carbon footprint levels. The purpose of this work is the development of a hybrid Power system that harnesses the renewable energy in sun and electricity to generate electricity. The working model can able to run on dual mode- solar and electricity. It can also be driven independently either by solar or electricity. The battery can be charge from solar panel (40W) or by power supply. The household single phase A.C. power supply of 230V is converted into 12V D.C. using step down transformer and rectifying circuit. The working model can achieve energy saving, low carbon emission, environmental protection for the upcoming future of human life.
Implementation of Hybrid Generation Power System in PakistanIJAPEJOURNAL
A solar-wind hybrid power generation system has been presented here. The application based system illustrated in this paper is designed on the basis of the solar and wind data for Pakistan. The power generated by the system is intended for domestic use. The most common source of unconventional power in homes is battery based UPS (Uninterrupted power supply) inverter. The UPS inverter charges the battery with conventional grid power. This system will charge the battery of UPS inverter by using only wind and solar power, which will make the system cost effective and more reliable. The reason for using both solar and wind is that recent studies have proven that combined system can be more productive and consistent and other thing is that neither of them can be used for continuous power generation. In the system illustrated in this paper the solar-wind system provides power periodically which is controlled by electronic methods and a microcontroller is used to monitor the power from both the inputs. The switching action is provided from the microcontroller to the battery charging based on the power received from solar photovoltaic panel and wind generators. In this paper, an efficient system has been presented comprising of solar panel, wind generator, charge controller and charge storage unit (battery). Solar panel is selected as the main input and the wind resource will be used only in the absence of the solar photovoltaic (PV) output.
IT INCLUDES SOLAR HIGHWAYS, VERTICAL WIND TURBINE, SPEED BUMBERS ENERGY GENERATION, REPORTS AND ARTICLES ETC... FULL PPT IS DONE BY THE STUDENTS OF MIT-WPU UNIVERSITY, KOTHRUD, PUNE...
DO LIKE AND SHARE THIS PPT
Solar Roadways - The future transport system ( Seminar report by Swapnil Patw...Swapneil Patwari
A solar roadway is a road surface that generates electricity by solar power photovoltaic cells. One current proposal is for 12 ft x 12 ft (3.658 m x 3.658 m) panels including solar panels and LED sign-age, that can be driven on. The concept involves replacing highways, roads, parking lots, driveways, and sidewalks with such a system. A layer of embedded LEDs will be used to create traffic warnings or crosswalks, and excess electricity could be used to charge electric vehicles or routed into the power grid. The electrical components will be embedded between layers of extremely durable, textured glass. A solar roadway is a series of structurally engineered solar panels that are driven upon. The idea is to replace current petroleum-based asphalt roads, parking lots, and driveways with solar road panels that collect energy to be used by homes and businesses, and ultimately to be able to store excess energy in or alongside the solar roadways. Thus renewable energy replaces the need for the current fossil fuels used for the generation of electricity, which cuts greenhouse gases and helps in sustainable development.
Parking lots, driveways, and eventually highways are all targets for the panels. If the entire United States Interstate Highway system were surfaced with Solar Roadways panels, it would produce more than three times the amount of electricity currently used nationwide. Existing prototype panels consist of three layers. 1. Road surface layer, 2. Electronics layer, 3. Base plate layer. Road Survey of India: India had a road network of over 42,45,805 kilometers in 2011.
In which national highways and state highways cover 0.05% of total road network.
These highways can produce 450TWh of electricity according to references when they are surfaced by solar panels.
But India needs 991TWh of electricity.
This implies that if 0.1% of total road network of India is surfaced with Solar Roadway panels, it would illuminate our nation. CONCLUSION: For roughly the same cost of the current systems (asphalt roads and fossil fuel burning electricity generation plants), the Solar Roadways can be implemented.
No more Global Warming.
Safer driving conditions.
Far less pollution.
A new secure highway infrastructure that pays for itself.
A decentralized, self-healing, secure power grid.
No more dependency on foreign oil.
Energy crisis are of special attention now-a-days. In this project presents a new system configuration of the front-end rectifier stage for a hybrid Hydro/wind/photovoltaic energy system. This system allows the three sources to supply the load separately or simultaneously depending on the availability of the energy sources. In household power generation wind and solar are the general hybrid energy options, which are used. But the overhead water tank is one of the neglected energy generation sources which are available in normal household and commercial places. In today’s world each and every source of energy has to be utilized. Therefore we are trying to use the stored energy in overhead water tank for power generation. Solar and Wind energy will contribute major part of power generation. Generated power will be stored in the battery which sources power to inverter and inverter to load. It gives us multiple sources of energy and also helps us to recover some amount of energy which is stored in overhead water tank.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
2. Abstract
Introduction
Wind energy
solar energy
hybrid system
components
pros & cons
applications
conclusion
References
2
3. Wind energy is the energy which is extracted from wind
Wind energy needs less cost for generation of electricity.
Maintenance cost is also less for wind energy system
Generation of electricity from wind is depend upon the
speed of wind flowing
that unavailability of power for all time.
3
August 3, 2016
WIND ENERGY
4. Solar energy is not always predictable because it
depends on amount of sunlight.
problem with solar system it cannot produce
energy in bad weather condition.
The major disadvantages of using independent
renewable energy resources are that
unavailability of power for all time. For overcoming
this we use solar and wind energy together.
4
August 3, 2016
SOLAR ENERGY
5. Energy system which is designed to extract power by using
two energy sources is called as the hybrid energy
system
Individual systems cannot provide a continuous power
supply
Solar and wind energy systems are omnipresent, freely
available, environmental friendly, and they are considered
as promising power generating sources due to their
availability
5
August 3, 2016
HYBRID ENERGY SYSTEM
11. August 3, 2016
11
WORKING
Turbine output increases with increase in
speed of the turbine
Inverter convert dc to ac
Controller monitors the system
12. August 3, 2016
12
Continuous power supply
Very high reliability & Long term Sustainability
Low maintenance cost
Clean and pure energy
The system gives quality power out-put DC to charge
directly the storage battery or provide AC
Efficient and easy installation, longer life
ADVANTAGES
13. Large number of harmonics is produced.
Initial investment is more.
Large space is required for larger generations
Efficiency is less than conventional power
plants
August 3, 2016
13
DISADVANTAGE
S
14. • Hotels
• Business (Institutions and Government)
• Large Estate Houses
• Factories and manufacturing facilities
• Commercial Power generation
• Street lighting
APPLICATIONS
15. August 3, 2016
15
It has greater efficiency. It can provide to remote places where
government is unable to reach. So that the power can be utilize where it
generated so that it will reduce the transmission losses and cost. Cost
reduction can be done by increasing the production of the equipment.
People should motivate to use the non conventional energy resources. It
is highly safe for the environment as it doesn’t produce any emission
and harmful waste product like conventional energy resources. It is cost
effective solution for generation. It only need initial investment. It has
also long life span. Overall it good, reliable and affordable solution for
electricity generation
CONCLUSION
