With state-of-the-art hybrid technology that comes in the form of SolarMill that efficiently utilizes the potential of wind and sun energy in any climatic conditions, minimizing your carbon footprint becomes to breeze
A basic introduction of Solar Energy. Solar energy is the energy received by the earth from the sun. This energy is in the form of solar radiation, which makes the production of electricity, heat, etc.
A basic introduction of Solar Energy. Solar energy is the energy received by the earth from the sun. This energy is in the form of solar radiation, which makes the production of electricity, heat, etc.
A short presentation about solar energy, renewable energy, advantages and disadvantages of solar energy, applications of solar energy. Life of earth.
Non-renewable energy and disadvantages of non renewable energy.
the solar panels are the primary source of the solar equipment which helps in trapping the solar energy. the performance of the solar panels vary. check the types of solar panles in these slides
A short presentation about solar energy, renewable energy, advantages and disadvantages of solar energy, applications of solar energy. Life of earth.
Non-renewable energy and disadvantages of non renewable energy.
the solar panels are the primary source of the solar equipment which helps in trapping the solar energy. the performance of the solar panels vary. check the types of solar panles in these slides
Hybrid power generation by and solar –windUday Wankar
With the development of industry and
agriculture, a great amount of energy such as coal, oil
and gas has been consumed in the world. Extensive
use of these fossil energies deteriorates a series of
problems like energy crisis, environmental pollution
and so on. Everybody knows that the fossil energy
reserves are finite, some day it will be exhausted.
It is possible that the world will face a
global energy crisis due to a decline in the
availability of cheap oil and recommendations to a
decreasing dependency on fossil fuel. This has led to
increasing interest in alternate power/fuel research
such as fuel cell technology, hydrogen fuel, biodiesel,
Karrick process, solar energy, geothermal energy,
tidal energy and wind. Today, solar energy and wind
energy have significantly alternated fossil fuel with
big ecological problems.
With the development of the science and
technology, power generation using solar energy and
wind power is gradually known by more and more
people. And it is widespread used in many developed
countries. The merits of the solar and wind power
generation are very obvious-infinite and nonpolluting.
The raw materials of the solar and wind
power generation derived from nature, and wind
power generation can work twenty-four hours a day,
solar power generation only works by daylight. In
addition, this kind of power generation has no
exhaust emission and there is no influence to the
nature. But it also has some shortcomings. Because
of the imperfect of the technology, equipment of the
solar and wind power generation is very expensive.
By far, it cannot be widely used.
In addition, solar and wind power
generation system affected by the changing of the
weather very much, so it has obvious defects in
reliability compared with fossil fuel, and it is difficult
to make it fit for practical use the lack of economical
efficiency .Because of these problems it needs to
increase the reliability of energy supply by
developing a system which interacts Solar and wind
energy. This kind of system is usually called windsolar
hybrid power generation system significantly
Hybrid wind-solar Power generation systemShivam Joshi
This project is basically based on power generation with help of wind as well as solar equipments. This we call it as Hybrid stucture of solar and wind. The presentation contains all the baci information required to undestand this new innovative concept. For more information you can contact me. I woll get back to you as soon as possible. Thanks you. Hope its helpfull :)
A collection of the PDF presentation published at the Clean Energy Council (CEC) Wind Forum 2016 in Melbourne. Key issues discussed were colocation of wind and solar, noise impacts, planning requirements across Australia and developments in the technology.
Computation of a gearbox for a wind power plantPietro Galli
The project Computation of a Gearbox for a Wind Power Plant dealt with the study and the analysis of the Generator in order to provide data about the following characteristics
o Static Design of the gearbox:
Design of shaft 1
Design of bearings
Internal stresses
Safety factor
Design of shaft 2
o Fatigue analysis:
Shaft 1 section 3
Shaft 1 section 4
Shaft 2 section 1
Shaft 2 section 2
o Rolling bearings analysis, life and fatique:
Roller bearings C and D
Bearing E
Rating life_bearing D
Rating life_bearing E
o Spur gears analysis:
Computation of transmission ratio, pt and b
Tooth bending strength
Tooth surface fatigue strength
Rural electrification by Lakshmi.Nidoni-Seminar report finallakshmi nidoni
ABSTRACT
In India, more than 200 million people live in rural areas without access to grid-connected power. A convenient & cost-effective solution would be hybrid power systems which can reduce dependency on grid supply, improve reliability. For a typical domestic load a solar –wind hybrid system is designed with charge controller to charge a conventional battery. To optimize system efficiency, a simple algorithm is developed for system sizing. Total cost of unit is calculated using life cycle cost analysis and payback period.
Hybrid solar wind power generation systemHemanth Duru
A simple introduction to Hybrid solar wind power generation System.In this system we use both wind and solar power generation devices.Here wind turbine is inter connected with solar panel.so that it can generate power in both ways.It gives power in night time and works efficiently.As per availability of sun rise and wind it can generate power.The power generated is given to the load.Its efficiency is high and eco-friendly.
Maximizing Power Production for Small Commercial Projectsallearthrenewables
For any project, return on investment is key, but this is especially true for small commercial projects, where getting the most bang for your buck is essential. The key is reframing your thinking: it’s not just about traditional measures of cost like dollar per watt. Thinking about production capacity, and your dollar per kilowatt-hour, will yield a much better picture of how your project will return–and how you can meet your bottom line.
In this webinar, we’ll take you through the key steps for maximizing your power production in small commercial projects, including choosing panels that will give you more power for your money, how to site effectively to ensure you’re capturing as much sunlight as possible throughout the day, and thinking beyond fixed-mount systems to systems that follow the sun to increase your production by up to 40%.
Sustainable Solar Power-The Solution to Providing Energy for Low Cost HousingEES Africa (Pty) Ltd
South Africa faces an immense challenge to address the backlog in the construction and delivery
of quality, low cost housing. While there are a number of initiatives underway, there is said to be a
backlog of some 2.3 million houses. Integral to the construction of these houses is the provision of
energy for basic needs. Solar technology is a cost-effective solution for providing energy to low cost houses.
Solar Talk Show at BIG-5 Solar Exhibition, DubaiIam Vinod Tiwari
"Achieving Energy Independence with Off-grid, Battery-based Solar Energy Systems" A Presentation by Vinod Tiwari at 'Dubai World Trade Center' in November 2017.
SolarMaxx providing Services and solutions for solar panel manufacturer, solar rechargeable led lights,Rechargeable torches offer a unique combination of renewable power and exceptional performance.
DOCWEB TECHNOLOGIES LTD., is an independent, international solution partner and project management firm in Abuja, and have worked with organizations across boards, assisting with the successful engineering, consultative, procurement, assessments, construction, and implementation of RENEWABLE ENERGY SOLUTION projects such as wind energy system, solar energy system and energy storage system to provide a 24/7 uninterrupted off-grid power supply, giving value for your money with lots of guarantees.
As a business development company, endowed with independent energy services and an energy consulting company registered in Nigeria, we leverage on our partnerships’ Technologies to build quality solutions, operate on a global trend, specializing in providing energy services to both private and public-sector clients. We promote and provide services on Renewable Energy Solutions.
Our MISSION as a solution partnering company is to promote the reduction of carbon emissions and spur economic growth by creating reliable and affordable clean energy solutions. We further aim to ensure an attractive Return on Investment for our clients and strategic partners.
We specialize in assisting public and private sector clients in designing, installing and retrofitting mechanical and electrical equipment, including renewable technologies, and implementing process improvements that use less energy and improve building comfort while at the same time lowering the facility’s operating and maintenance costs.
Sustainability and environmental protection are our priorities. Creating efficient and sustainable renewable energy projects includes intelligent energy storage, especially in areas with unstable grids or remote territories, this has inspired us constantly on our path towards a clean energy future. Our aim is to enable everyone to benefit from cost effective and environmentally friendly renewable power production as an alternative to fossil fuel energy. Our employees and partners are achievers in environmental, economic and social standards. We assume responsibility today – for a clean and sustainable future!
Regards
Caleb Obiajuru
Marketing Consultant
+234 816 445 7372
caleb.obiajuru@gmail.com
"Understanding the Carbon Cycle: Processes, Human Impacts, and Strategies for...MMariSelvam4
The carbon cycle is a critical component of Earth's environmental system, governing the movement and transformation of carbon through various reservoirs, including the atmosphere, oceans, soil, and living organisms. This complex cycle involves several key processes such as photosynthesis, respiration, decomposition, and carbon sequestration, each contributing to the regulation of carbon levels on the planet.
Human activities, particularly fossil fuel combustion and deforestation, have significantly altered the natural carbon cycle, leading to increased atmospheric carbon dioxide concentrations and driving climate change. Understanding the intricacies of the carbon cycle is essential for assessing the impacts of these changes and developing effective mitigation strategies.
By studying the carbon cycle, scientists can identify carbon sources and sinks, measure carbon fluxes, and predict future trends. This knowledge is crucial for crafting policies aimed at reducing carbon emissions, enhancing carbon storage, and promoting sustainable practices. The carbon cycle's interplay with climate systems, ecosystems, and human activities underscores its importance in maintaining a stable and healthy planet.
In-depth exploration of the carbon cycle reveals the delicate balance required to sustain life and the urgent need to address anthropogenic influences. Through research, education, and policy, we can work towards restoring equilibrium in the carbon cycle and ensuring a sustainable future for generations to come.
UNDERSTANDING WHAT GREEN WASHING IS!.pdfJulietMogola
Many companies today use green washing to lure the public into thinking they are conserving the environment but in real sense they are doing more harm. There have been such several cases from very big companies here in Kenya and also globally. This ranges from various sectors from manufacturing and goes to consumer products. Educating people on greenwashing will enable people to make better choices based on their analysis and not on what they see on marketing sites.
Natural farming @ Dr. Siddhartha S. Jena.pptxsidjena70
A brief about organic farming/ Natural farming/ Zero budget natural farming/ Subash Palekar Natural farming which keeps us and environment safe and healthy. Next gen Agricultural practices of chemical free farming.
Artificial Reefs by Kuddle Life Foundation - May 2024punit537210
Situated in Pondicherry, India, Kuddle Life Foundation is a charitable, non-profit and non-governmental organization (NGO) dedicated to improving the living standards of coastal communities and simultaneously placing a strong emphasis on the protection of marine ecosystems.
One of the key areas we work in is Artificial Reefs. This presentation captures our journey so far and our learnings. We hope you get as excited about marine conservation and artificial reefs as we are.
Please visit our website: https://kuddlelife.org
Our Instagram channel:
@kuddlelifefoundation
Our Linkedin Page:
https://www.linkedin.com/company/kuddlelifefoundation/
and write to us if you have any questions:
info@kuddlelife.org
Micro RNA genes and their likely influence in rice (Oryza sativa L.) dynamic ...Open Access Research Paper
Micro RNAs (miRNAs) are small non-coding RNAs molecules having approximately 18-25 nucleotides, they are present in both plants and animals genomes. MiRNAs have diverse spatial expression patterns and regulate various developmental metabolisms, stress responses and other physiological processes. The dynamic gene expression playing major roles in phenotypic differences in organisms are believed to be controlled by miRNAs. Mutations in regions of regulatory factors, such as miRNA genes or transcription factors (TF) necessitated by dynamic environmental factors or pathogen infections, have tremendous effects on structure and expression of genes. The resultant novel gene products presents potential explanations for constant evolving desirable traits that have long been bred using conventional means, biotechnology or genetic engineering. Rice grain quality, yield, disease tolerance, climate-resilience and palatability properties are not exceptional to miRN Asmutations effects. There are new insights courtesy of high-throughput sequencing and improved proteomic techniques that organisms’ complexity and adaptations are highly contributed by miRNAs containing regulatory networks. This article aims to expound on how rice miRNAs could be driving evolution of traits and highlight the latest miRNA research progress. Moreover, the review accentuates miRNAs grey areas to be addressed and gives recommendations for further studies.
Characterization and the Kinetics of drying at the drying oven and with micro...Open Access Research Paper
The objective of this work is to contribute to valorization de Nephelium lappaceum by the characterization of kinetics of drying of seeds of Nephelium lappaceum. The seeds were dehydrated until a constant mass respectively in a drying oven and a microwawe oven. The temperatures and the powers of drying are respectively: 50, 60 and 70°C and 140, 280 and 420 W. The results show that the curves of drying of seeds of Nephelium lappaceum do not present a phase of constant kinetics. The coefficients of diffusion vary between 2.09.10-8 to 2.98. 10-8m-2/s in the interval of 50°C at 70°C and between 4.83×10-07 at 9.04×10-07 m-8/s for the powers going of 140 W with 420 W the relation between Arrhenius and a value of energy of activation of 16.49 kJ. mol-1 expressed the effect of the temperature on effective diffusivity.
WRI’s brand new “Food Service Playbook for Promoting Sustainable Food Choices” gives food service operators the very latest strategies for creating dining environments that empower consumers to choose sustainable, plant-rich dishes. This research builds off our first guide for food service, now with industry experience and insights from nearly 350 academic trials.
Diabetes is a rapidly and serious health problem in Pakistan. This chronic condition is associated with serious long-term complications, including higher risk of heart disease and stroke. Aggressive treatment of hypertension and hyperlipideamia can result in a substantial reduction in cardiovascular events in patients with diabetes 1. Consequently pharmacist-led diabetes cardiovascular risk (DCVR) clinics have been established in both primary and secondary care sites in NHS Lothian during the past five years. An audit of the pharmaceutical care delivery at the clinics was conducted in order to evaluate practice and to standardize the pharmacists’ documentation of outcomes. Pharmaceutical care issues (PCI) and patient details were collected both prospectively and retrospectively from three DCVR clinics. The PCI`s were categorized according to a triangularised system consisting of multiple categories. These were ‘checks’, ‘changes’ (‘change in drug therapy process’ and ‘change in drug therapy’), ‘drug therapy problems’ and ‘quality assurance descriptors’ (‘timer perspective’ and ‘degree of change’). A verified medication assessment tool (MAT) for patients with chronic cardiovascular disease was applied to the patients from one of the clinics. The tool was used to quantify PCI`s and pharmacist actions that were centered on implementing or enforcing clinical guideline standards. A database was developed to be used as an assessment tool and to standardize the documentation of achievement of outcomes. Feedback on the audit of the pharmaceutical care delivery and the database was received from the DCVR clinic pharmacist at a focus group meeting.
2. LAVANCHA : ABOUT US
• To realize the fullest potential of the renewable energy resources
to transform communities by inspiring people to open their minds
to save our planet earth from “CLIMATE CHANGE”.
• Eco-Friendly electrification by using renewable energy & bring
smiles on the faces of people living in darkness & focus on reducing
hazardous carbon emissions produced by fossil fuels.
29/07/2016 LAVANCHA RENEWABLE ENERGY PVT LTD 2
3. Transport Minister & Health Minister
29/07/2016 LAVANCHA RENEWABLE ENERGY PVT LTD 3
4. Energy Minister & Chief Minister
29/07/2016 LAVANCHA RENEWABLE ENERGY PVT LTD 4
11. Why LAVANCHA ?
1. When you need more energy generation from limited Roof
Top Space .
2. Power generation starting at 2 m/s wind speed.
3. Mechanical braking at high-speed winds beyond 18.5 m/s.
4. Appropriate for ON-GRID & OFF-GRID applications.
5. Higher Power Density / Square Foot
6. Freeze your Electricity Bills @ just Rs.4.7 / Unit
7. Online Remote Monitoring to check daily performance which
assures Service Reliability.
8. You can track the electricity generation data at the comfort
of Laptop / Mobile through SMS & Email alerts.
9. Scalable Hybrid System from KW to MW
29/07/2016 LAVANCHA RENEWABLE ENERGY PVT LTD 11
12. SOLAR + WIND : ANALYSIS
29/07/2016 LAVANCHA RENEWABLE ENERGY PVT LTD 12
13. The SolarMill®
An Efficient Way of
Combining the Power of Wind and Solar
The SolarMill Generates:
• Energy from the sun and wind:Daytime.
• Energy from the wind: Day & Night.
• Energy even on cloudy days & rainy season.
• More energy even on hot sunny days due to cooling effect on solar panels
through wind-blown by turbines.
• SolarMills harvest energy from the sun and wind simultaneously and also
independently. Standing about 1 meter tall, SolarMills meet most of the
building code requirements.
14. Why SolarMill?
• The SolarMill technology smooth’s out the highs and lows of energy
generation periods due to seasonality as solar irradiation and wind speeds
change throughout the course of the year.
• The hybrid solution will compensate for seasonal losses of power generation
while depending on any one type of renewable energy system.
16. Construction
SolarMill Assembly:
• 3 Vertical Axis
Turbines mounted on
a single base
(Savonius)
energy by
from
winds
any
• Turbines
produce
accepting
coming
direction
• Cut-in wind speed –
2.5 m/s & Cut-out
wind speed – 18 m/s
• Silent operation
• Designed for both On-
Grid and Off-Grid
applications
Generator beneath
each Turbine
Wind Electronic
Box
17. The Technology
Reliable
• Corrosion Resistant Material: all steel parts are pre-galvanized.
Aluminum or stainless components are used whereappropriate.
• Circuit Protection: Electronics provide protection for over-voltage and over-
current by monitoring the current and voltage in each system.
• Mechanical Braking: The unit is equipped with a failsafe centrifugal braking
system designed to protect the turbines and generators at high wind speeds
(beyond 18.5m/s).
• Able to withstand temperature ranges from -30°C to50°C.
18. Advantages of SolarMill
• Easy to mount on any rooftop; no complicated masts,
guy wires, or towers.
• Simple ballasted installation that avoids roof
penetration.
• Environment-friendly, silent operation.
• Higher power density per square foot.
• Scalable power generation.
• Mechanical braking at high-speed winds beyond 18 m/s.
• Increases the battery life & minimizes the battery
storage capacity.
21. Model Specifications
Model SM1-1P
Solar Rated Power 250W
Wind Rated Power
for the location
500W
TotalCapacity 750W
Model SM1-2P
Solar Rated Power 500W
Wind Rated Power
for the location
500W
TotalCapacity 1kW
Model SM1-3P
Solar Rated Power 750W
Wind Rated Power
for the location
500W
TotalCapacity 1.25kW
Model SM2-3P
Solar Rated Power 750W
Wind Rated Power
for the location
1kW
TotalCapacity 1.75kW
Model SM2-6P
Solar Rated Power 1.5kW
Wind Rated Power
for the location
1kW
TotalCapacity 2.5kW
Model SM2-9P
Solar Rated Power 2.25W
Wind Rated Power
for the location
1kW
TotalCapacity 3.25kW
22. The SolarMill® - SM1-3P Model
Overview
SolarMill SM1-3P
Product Highlights
• Daytime power from the Sun
• Up to 24hr power from the wind
• Get power from 4 to 40mphwinds
• Connects to your electrical panel
• Silent Operation, & Roof Mounted
• 25yr Design Life, 5yr Manufacturer’s
Warranty
• Proudly made in the USA!
Other Benefits
• More Power every day than solar
alone
• Same footprint as a solar panel
• Clean, renewable energy up to 24hrs
daily
• Lowers your electric bill
• Modular design, Scalable to fit your
needs
• Residential or Commercial
• Custom Colors Turbines, visually
engaging
Grid Tied Kit Includes
• Complete system with inverter
23. Frame
Frame
The SolarMill® -Product
Overview
Specifications
Features
• 1st watt from wing at 4mph
• Mechanical braking >18.5m/s (or
41.4mph)
• High energy density per sq.ft.
• Scalable, easy linear daisy chain
connectivity
• On or Offgrid
• Minimizes need for backup batteries
• Provide up to 24hr charging for
batteries
• Mounts on rooftops, with low/no
24. Product Solutions
Hybrid Configuration &
Scalability
Reduce to 4 x SM1-3P units
for deployment to small
commercial or residential
applications.*
Group Multiple SM4-12P
units to increase hybrid
capacity to larger
commercialsites.*
SM4-
12P/4.8Kw
*Add PV capacity where needed
4 x 300w
PV
1200w
12 x 300w
PV
4800w
SM1-
3P/1.2Kw
25. The highest energy density per square foot in
the industry.
• Need more energy from limited real estate?
• The design of the hybrid system allows it to be
integrated in the SAME SPACE as solar panels.
• The SolarMill® uses the same space as a solar
panel and allows for easy streamlined
integration within a standard solar array.
• For maximum wind energy output, only the 1st
and last rows of a standard flat roof structure
maybe used.
• SolarMills can mount almost anywhere, flat,
peaked roofs and custom structures.
Why SolarMill®?
26. Wind speed increases with height.
• SolarMills can harvest MORE ENERGY than solar
panels alone, and even MORE ENERGY at higher
elevations.
• SolarMills harvest energy from the sun and wind
independently and simultaneously.
• Solar energy is fairly predictable daily, but wind
energy historically requires a longer term
evaluation.
• The SolarMill® allows for less siting diligence than
Horizontal Axis Wind Turbines (HAWT).
• The SolarMill® turbines generate wind energy
from almost any angle.
• Standing about 1 meter tall, SolarMills meet most
permitting requirements.
Why SolarMill®?
27. Tallest
building
On a ridge/hill
Clearhorizons
Coastal
Prevailing
Wind
Siting your SolarMill®
Solution
The HIGHER the
BETTER!
Prevailing
Wind
Maximize Wind, Don’t block the
Sun!
Ideally, SolarMills should be placed:
1. facing the prevailing wind, at the
highest available point. Wind is usually
exponentially stronger AND more
reliable the higher up it is. the wind on
your roof will likely be significantly
higher than on the ground.
2. without major obstructions to the wind
OR sun from surrounding hills, trees,
other buildings or objects.
Finding out if your site is may besuited
3.fowriathSosolalarMrpilal®neelnsedrigryecstollyuftaiocninigsthe sun
pretty easy, but it is critical to get it
riagthtn!oon(south)
28. SolarMill® vs Solar Only
28 day Performance Summary
March 30-April 26, 2015
1KW side by side Test Units
Kingston, Jamaica
30. SolarMill® vs Solar Only
28 day PerformanceSummary
March 30-April 26, 2015
1KW - Side by Side Performance 28 day Review
Site Location
East Street Kingston, Jamaica, 4 Story Commercial Building. Prevailing winds are partially obstructed by more than
3 adjacent buildings, and cause occasional turbulence with wind gusts greater than 5m/s.
Overview: 2 Systems
A 1KW SolarMill® Hybrid, and a 1KW Solar Only installed side by side. Identical Inverters (Cap. 1.2KW). Date
Commissioned: March 18, 2015
Capacity: 1 KW Hybrid
Configuration: SolarMill®SM1-3P
Capacity: 1KW Solar Only
Configuration: 4 X 250W SOLARPANELS
31. SolarMill® vs Solar Only
28 day PerformanceSummary
March 30-April 26, 2015
1KW - Side by Side Performance 28 day Review
SolarMill® produced 13% MORE
total energy
Wind system outperformed the 4th
solar panel
April is historically the 2nd highest
month for solar irradiance
April is historically the 2nd lowest
month for wind speed
33. SolarMill® created more
energy
19 out of 28days.
1.5
1
0.5
0
2
2.5
3
3.5
4
4.5
5
30Mar
31Mar
01-Apr
02-Apr
03-Apr
04-Apr
05-Apr
06-Apr
07-Apr
08-Apr
09-Apr
10-Apr
11-Apr
12-Apr
13-Apr
14-Apr
15-Apr
16-Apr
17-Apr
18-Apr
19-Apr
20-Apr
21-Apr
22-Apr
23-Apr
24-Apr
25-Apr
26-Apr
SolarMill (3PV + 1 Mill) Solar(4PV)
S
M
S
M
S
M
S
M
S
M
S
M S
M
S
M
S
M S
M
S
M
S
M
S
M
S
M
S
M
S
M
S
S
M M S
M
SolarMill® vs Solar Only
28 day PerformanceSummary
March 30-April 26, 2015
1KW - Side by Side Performance 28 day Review
1KW Daily Production (KWh)
SolarMill® & Solar Only
34. SolarM
ill®3PV &
1Mill
1KW
April 18, 2015 April 19, 2015 April 20, 2015April 15, 2015 April 16, 2015 April 17, 2015
Solar
Only
4 PV
1KW
2.73K
Wh
2.11K
Wh
3.73K
Wh
3.41K
Wh
3.04K
Wh
1.66K
Wh
4.06K
Wh
3.44K
Wh
4.27K
Wh
3.67K
Wh
4.44K
Wh
2.14K
Wh
Notes
• Wind is variable, but can help stabilize/smooth out daily production
output of PV
• Total daily production is less variable when wind is present
• Wind power offsets lower output due to from temporary cloud cover
SolarMill® vs SolarOnly
28 day PerformanceSummary
March 30-April 26, 2015
1KW - Side by Side Performance 28 day Review
SolarMill® can stabilize daily energ
output
35. SolarMillEnergy
4.45KWh
Solar Only Energy
3.14KWh
Evening Energy
Production
Morning Energy
Production
SolarMill® vs Solar
Only
28 day PerformanceSummary
March 30-April 26, 2015
1KW - Side by Side Performance 28 day Review
Starts
Early
Better Peak
Energy
Works Late
Why SolarMill®
MORE ENERGY
Actual dataon
April28
24 hour operation of
SolarMill vs.
11 hour operation of Solar
PWanhelysSolarMill®?
Early energy production
Better daytime peaks
Late evening & night-
time energy
Improves Reliability
More Total Energy!
36. 29/07/2016 LAVANCHA RENEWABLE ENERGY PVT LTD
TowerMill One
Most flexible solution for retrofits & new construction
36
Solar and Wind Turbines on ground mounted
platform
Installed 10-15m above site equipment – no
operational interference
Silent operation
Fast Installation
Scalable
Reduces running costs
37. 29/07/2016 LAVANCHA RENEWABLE ENERGY PVT LTD 37
TowerMill XL
Lattice Tower Energy Solution
More Reliable, More Stable Power
Wind turbine units mounted ON Tower
Wind Units width 1.52m
1 or 2 units at each level
Higher unobstructed winds
Increased wind energy
Solar only on raised platform – 10-15m
tall
Additional Turbines may be added
Improved Security
No interference with Comm. equipment
Silent operation
39. 29/07/2016 LAVANCHA RENEWABLE ENERGY PVT LTD 39
Mobile Energy Applications
1. MILITARY & DISASTER MANAGEMENT.
2. Reduces or Replaces Diesel Generators
consumption at Remote Areas.
3. Construction Sites for Electricity
Requirements .
4. Temporary Labour Camps .
5. Medical Emergencies / Services at Remote
Areas.
6. Mobile ATM’s / Mobile Offices.
7. Central / State Government & NGO ‘s for
educating Rural Commmunity.
40. 29/07/2016 LAVANCHA RENEWABLE ENERGY PVT LTD 40
Mobile Energy
Applications
Disaster Management
Energy management prioritization
Automatic switching among up to 3 energy
sources: renewables; generator; or grid
(where available)
Seamless integration of wind, solar, fuel and
energy storage systems.
Intelligent multisource power selection
Programmable “bias” systems provide
continuous power availability
Single operator system to reduce manpower
dependence
Indiana Department of Homeland Security Emergency
ResponseUnit
42. 29/07/2016 LAVANCHA RENEWABLE ENERGY PVT LTD 42
New Application: “The MillBoard”
Outdoor Advertising Opportunity
• More attention for your clients messaging
– Incredible appeal of custom colored
mills
– Encourage “new” interest in ads &
messages
– Establish premium locations for clients
– Clients may extract new equity
• Extract new margins & equity
– Expand environmentally friendly client
options
– Generate energy, Lower energy costs,
Stronger Margins
– Taxcredits, and Feed in tariffs from
energy companies
– Reduce Carbon footprint with
renewables
43. 29/07/2016 LAVANCHA RENEWABLE ENERGY PVT LTD 43
Outdoor Advertising Opportunity
“The MillBoard” – Commercial Building Advertising
Client Benefits
“MillMarking”
• Establishes Landmarks
• Enhance Customer Appeal
• Enhances image as environmentally
aware
• Integrate colors with logo or site
colors
Environmentally friendly
• Quiet operation
• No threat to wildlife
• Clean energy
Economics
• Boosts ROI
• Increased Property Value
• Energy Sustainability
• Low maintenance & energy cost
• Tax Credits & Feed in Tariffs
Proudly made in the USA
44.
45. PowerMill™
Utility Scale, Hybrid, Renewable Energy
The PowerMill™ is built on the Company’s core, patented, hybrid technology. By combining
both wind turbines and solar panels in a compact platform the PowerMill™ can deliver
consistent renewable energy 24/7/365. Designed of as a utility scale product, the PowerMill™
has been engineered to meet the needs of large deployments from urban grid- tied
installations to remote, rural micro-grids. The PowerMill™ is a flexible technology for all types
of large- scale generation needs.
46. PowerMill™ Benefits
• Maximizes power generation in a small
footprint: 1MW requires 2.5 acres of land
vs a regular solar farm which requires 5
acres
• Electrically and mechanicallyscalable
• On-grid or off-grid hookup
• Flexible orientation maximizes solar and
wind resources
• Highly efficient, low cost technology
designed to ‘work anywhere’ mitigating
the need for long-term site evaluations
• Security hardware installed that prevents
theft
Creates new revenue streams from
unused real estate
56. PowerMill™
Containerized All in one micro-grid
ready system.
Flexibility with wind, PV,
PVT, and battery
inversion.
Off-grid capability.
Deploys straight out of
container.
Container converts to
battery storage for the
system.
Container acts as
stabilizer for mounting
and installation.
57. Future SolarMill
Applications
PowerMill™ – On or off grid
More Power
More reliable
Improved Generation
Stability
Highly Scalable
Fast Installation
Same Space
79. SolarMill®: Tri-hybrid
Wind, Solar, Thermal
Clean, affordable, and
reliable
Generates electrical,
thermal, and wind energy
simultaneously
Utilizes the same
SolarMill® core
technology
PVT panels have up to 4x
more energy output than
a standard PV panel and
up to 30% more electrical
output
80. POWER MILL
For further information on how the PowerMill™ works contact us at :
niranjan.patil@lavancha.in / +91-9900666885
81. For More Information
Contact:
NIRANJAN PATIL
CEO & MD
+91- 9900666885
niranjan.patil@lavancha.in
OFFICE Address : LAVANCHA RENEWABLE ENERGY PVT LTD
C/o: REGUS CBD, East Wing , Level – 9 , RAHEJA TOWERS, M.G. ROAD
BENGALURU : 560001