Module-I (12 Hours)
Development of safety movement: - Need for safety-safety and productivity-planning for safetyplanning
procedure-safety policy-formulation of safety policy-safety budget-role and
qualification of safety professional-safety committees-need, types and functions of committeessafety
organizations.
Module II (12 Hours)
Accident prevention: - Basic philosophy of accident prevention-nature and causes of accidentsaccident
proneness-cost of accidents-accident prevention methods-Domino theory-safety
education and training-training methods-motivation and communicating safety-personal
protective equipments.
Module III (12 Hours)
Safety management techniques: - Safety inspection-Safety sampling technique-Safety audit-
Safety survey-Incident recall technique-Job safety analysis-Damage control-Risk management.
Involvement in safety: - Role of management-role of supervisors-role of workmen- role of
unions-role of government
Module IV (12 Hours)
Occupational health and hygiene: - Functional units and activities of occupational health and
hygiene-types of industrial hazards-physical, chemical, mechanical, electrical, social, biological,
ergonomic and environmental hazards-factors impeding safety-house keeping-hearing
conservation programme
Module V (12 Hours)
Industrial fire protection: - Fire chemistry-classification of fires-fire prevention activities-fire
risks-fire load -contributing factors to industrial fires-fire detection-industrial fire protection
systems.
Module-I (12 Hours)
Development of safety movement: - Need for safety-safety and productivity-planning for safetyplanning
procedure-safety policy-formulation of safety policy-safety budget-role and
qualification of safety professional-safety committees-need, types and functions of committeessafety
organizations.
Module II (12 Hours)
Accident prevention: - Basic philosophy of accident prevention-nature and causes of accidentsaccident
proneness-cost of accidents-accident prevention methods-Domino theory-safety
education and training-training methods-motivation and communicating safety-personal
protective equipments.
Module III (12 Hours)
Safety management techniques: - Safety inspection-Safety sampling technique-Safety audit-
Safety survey-Incident recall technique-Job safety analysis-Damage control-Risk management.
Involvement in safety: - Role of management-role of supervisors-role of workmen- role of
unions-role of government
Module IV (12 Hours)
Occupational health and hygiene: - Functional units and activities of occupational health and
hygiene-types of industrial hazards-physical, chemical, mechanical, electrical, social, biological,
ergonomic and environmental hazards-factors impeding safety-house keeping-hearing
conservation programme
Module V (12 Hours)
Industrial fire protection: - Fire chemistry-classification of fires-fire prevention activities-fire
risks-fire load -contributing factors to industrial fires-fire detection-industrial fire protection
systems.
This presentation is all about industrial safety and precaution. the precaution that we have to take while working on any industries.
Thankyou
made by -Head of department Mechanical engg. govt polytechnic college, seoni(M.P)
PRAKASH SHINDE
The health and safety in the workplace are designed to create the awareness of key health and safety issues found in the workplace as well as the role you will play in ensuring yours as well as other’s safety. The program offers the skills and knowledge required to start a career in the field of health and safety.
This presentation is all about industrial safety and precaution. the precaution that we have to take while working on any industries.
Thankyou
made by -Head of department Mechanical engg. govt polytechnic college, seoni(M.P)
PRAKASH SHINDE
The health and safety in the workplace are designed to create the awareness of key health and safety issues found in the workplace as well as the role you will play in ensuring yours as well as other’s safety. The program offers the skills and knowledge required to start a career in the field of health and safety.
Se inicia con principios del riego y conceptos fundamentales. Luego abarca los tipos de riego, un breve repaso por los sistemas y pasa por la uniformidad y eficiencia para compararlos.
SESSION : 1 Health & Safety Management : An overview
What is Industrial Safety?
Why Manage Health & Safety – 3 Good Reasons
Cost and Consequences of Accidents – Video
Accident Causation theory
Common cause of accidents in construction
How Manage Health & Safety – HSG (65) Model
4 C’s for Positive Health & Safety Culture
Proactive & Reactive Monitoring
Principle of Control in H&S
Hazards & Risk Management
Safe System of work, PTW
Hierarchy of Control – Video
Principle of Accident prevention
MEEP – Material, Equipment, Environment & People
IITS - Information, Instruction , Training and Supervisions
Developing Accident Avoidance Program for Occupational Safety and Healththeijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Session 01 _Risk Assessment Program for YSP_Introduction, Definitions and Sta...Muizz Anibire
Program Objectives
In light of industrialization trends across the globe, new hazards are constantly introduced in many workplaces. This program aims to provide Young Safety Professionals (YSPs) from diverse backgrounds with the requisite skill to address the health and safety hazards in the modern workplace.
Identification of occupational diseases, health risk, hazard and injuries amo...eSAT Journals
Abstract
Thermal power plant uses coal as fuel for their working. Coal after burning leaves ash. Disposal of this ash is also one important task. Ash comes in contact with open environment and has adverse effects on health of human being. Due to these various health problems like skin diseases, breathing problem etc. are started in man working under those premises. Some other elements like boiler, turbine, generator, material handling are those elements due to which hazards and accidents take place while operation and maintenance of these. This work focuses on identification of various Occupational diseases and injuries, health risks associated with the man power working in thermal power plant. This data were collected by questionnaires and personnel interview of the workers working in different section of the thermal power plant like boiler section, turbine & generator section, coal & ash handling plant, hydrogen plant etc. Analysis is done in terms of different variables, such as age, skills experience, type of injuries and type of diseases. Results are shown in the form graph and chart. The results indicate a remarkable and visible impact on health of workers during operation and maintenance.
Key Words: Occupational hazards and Diseases, health risk, Injuries, Questionnaires, Personnel interview.
Study on safety management of small and medium scale industries in tamilnadueSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Things can go seriously wrong if not enough attention is paid to industry-related, work health and safety regulations. The construction industry ranks in the top 5 industries for work-related fatalities, emphasising the importance of compliance for ensuring a safe and healthy working environment for all your personnel.
Industraial safety Trianing for small and medium scale industries Rohan Homkar
We conduct safety training programs for all industrial SEGMENTS
1) SAFETY ORIENTATION COURSE
2) ELECTRICAL SAFETY
3) ELECTRICAL FIRE & FIRE PROTECTION
4) USE AND IMPORTANCE OF PRESONAL PROTECTIVE EQUIPMENTS
5) CHEMICAL SAFETY
6) HAZARD IDENTIFICATION AND RISK ASSESSMENT COURSE
7) PERMIT TO WORK SYSTEM AND JOB SAFETY ANALYSIS TRAINING
8) OFFICE SAFETY AND EMERGENCY PREPAREDNESS
9) ROAD SAFETY EQUIPMENTS AND SAFE DRIVING AT INDUSTRIAL PREMISES
10) SAFE ATTITUDE BUILDING COURSE
Safety training program details
Total course duration = 6 hours
Interactive training session = 3 * 1 hours
Audio + Video presentation = 1 hour 30 min.
Course assessment =30 min.
case study and Q & A session =1hour
Determination of the most important General Failure Types based on Tripod-DELTAIJERA Editor
Prior research on the occupational incidents show that job-related accidents are majorly caused by two types of failures: a) active failures (technical and human errors), they directly affect the occurrences and totally happen in the beginning of work, b) latent failures, though hold unseen and steady for a long while in the system, they are rooted in the decisions of top-ranking officials. Tripod-DELTA is a tool that exposes latent failures. It classifies all possible latent failures in to 11 GFTs. By analyzing an operation using the GFTs, DELTA assesses where the most problematic areas of an operation are. The process of action itemizing DELTA facilitates the removal of latent failures.
How many patients does case series should have In comparison to case reports.pdfpubrica101
Pubrica’s team of researchers and writers create scientific and medical research articles, which may be important resources for authors and practitioners. Pubrica medical writers assist you in creating and revising the introduction by alerting the reader to gaps in the chosen study subject. Our professionals understand the order in which the hypothesis topic is followed by the broad subject, the issue, and the backdrop.
https://pubrica.com/academy/case-study-or-series/how-many-patients-does-case-series-should-have-in-comparison-to-case-reports/
Navigating the Health Insurance Market_ Understanding Trends and Options.pdfEnterprise Wired
From navigating policy options to staying informed about industry trends, this comprehensive guide explores everything you need to know about the health insurance market.
Medical Technology Tackles New Health Care Demand - Research Report - March 2...pchutichetpong
M Capital Group (“MCG”) predicts that with, against, despite, and even without the global pandemic, the medical technology (MedTech) industry shows signs of continuous healthy growth, driven by smaller, faster, and cheaper devices, growing demand for home-based applications, technological innovation, strategic acquisitions, investments, and SPAC listings. MCG predicts that this should reflects itself in annual growth of over 6%, well beyond 2028.
According to Chris Mouchabhani, Managing Partner at M Capital Group, “Despite all economic scenarios that one may consider, beyond overall economic shocks, medical technology should remain one of the most promising and robust sectors over the short to medium term and well beyond 2028.”
There is a movement towards home-based care for the elderly, next generation scanning and MRI devices, wearable technology, artificial intelligence incorporation, and online connectivity. Experts also see a focus on predictive, preventive, personalized, participatory, and precision medicine, with rising levels of integration of home care and technological innovation.
The average cost of treatment has been rising across the board, creating additional financial burdens to governments, healthcare providers and insurance companies. According to MCG, cost-per-inpatient-stay in the United States alone rose on average annually by over 13% between 2014 to 2021, leading MedTech to focus research efforts on optimized medical equipment at lower price points, whilst emphasizing portability and ease of use. Namely, 46% of the 1,008 medical technology companies in the 2021 MedTech Innovator (“MTI”) database are focusing on prevention, wellness, detection, or diagnosis, signaling a clear push for preventive care to also tackle costs.
In addition, there has also been a lasting impact on consumer and medical demand for home care, supported by the pandemic. Lockdowns, closure of care facilities, and healthcare systems subjected to capacity pressure, accelerated demand away from traditional inpatient care. Now, outpatient care solutions are driving industry production, with nearly 70% of recent diagnostics start-up companies producing products in areas such as ambulatory clinics, at-home care, and self-administered diagnostics.
CRISPR-Cas9, a revolutionary gene-editing tool, holds immense potential to reshape medicine, agriculture, and our understanding of life. But like any powerful tool, it comes with ethical considerations.
Unveiling CRISPR: This naturally occurring bacterial defense system (crRNA & Cas9 protein) fights viruses. Scientists repurposed it for precise gene editing (correction, deletion, insertion) by targeting specific DNA sequences.
The Promise: CRISPR offers exciting possibilities:
Gene Therapy: Correcting genetic diseases like cystic fibrosis.
Agriculture: Engineering crops resistant to pests and harsh environments.
Research: Studying gene function to unlock new knowledge.
The Peril: Ethical concerns demand attention:
Off-target Effects: Unintended DNA edits can have unforeseen consequences.
Eugenics: Misusing CRISPR for designer babies raises social and ethical questions.
Equity: High costs could limit access to this potentially life-saving technology.
The Path Forward: Responsible development is crucial:
International Collaboration: Clear guidelines are needed for research and human trials.
Public Education: Open discussions ensure informed decisions about CRISPR.
Prioritize Safety and Ethics: Safety and ethical principles must be paramount.
CRISPR offers a powerful tool for a better future, but responsible development and addressing ethical concerns are essential. By prioritizing safety, fostering open dialogue, and ensuring equitable access, we can harness CRISPR's power for the benefit of all. (2998 characters)
CHAPTER 1 SEMESTER V PREVENTIVE-PEDIATRICS.pdfSachin Sharma
This content provides an overview of preventive pediatrics. It defines preventive pediatrics as preventing disease and promoting children's physical, mental, and social well-being to achieve positive health. It discusses antenatal, postnatal, and social preventive pediatrics. It also covers various child health programs like immunization, breastfeeding, ICDS, and the roles of organizations like WHO, UNICEF, and nurses in preventive pediatrics.
Global launch of the Healthy Ageing and Prevention Index 2nd wave – alongside...ILC- UK
The Healthy Ageing and Prevention Index is an online tool created by ILC that ranks countries on six metrics including, life span, health span, work span, income, environmental performance, and happiness. The Index helps us understand how well countries have adapted to longevity and inform decision makers on what must be done to maximise the economic benefits that comes with living well for longer.
Alongside the 77th World Health Assembly in Geneva on 28 May 2024, we launched the second version of our Index, allowing us to track progress and give new insights into what needs to be done to keep populations healthier for longer.
The speakers included:
Professor Orazio Schillaci, Minister of Health, Italy
Dr Hans Groth, Chairman of the Board, World Demographic & Ageing Forum
Professor Ilona Kickbusch, Founder and Chair, Global Health Centre, Geneva Graduate Institute and co-chair, World Health Summit Council
Dr Natasha Azzopardi Muscat, Director, Country Health Policies and Systems Division, World Health Organisation EURO
Dr Marta Lomazzi, Executive Manager, World Federation of Public Health Associations
Dr Shyam Bishen, Head, Centre for Health and Healthcare and Member of the Executive Committee, World Economic Forum
Dr Karin Tegmark Wisell, Director General, Public Health Agency of Sweden
QA Paediatric dentistry department, Hospital Melaka 2020Azreen Aj
QA study - To improve the 6th monthly recall rate post-comprehensive dental treatment under general anaesthesia in paediatric dentistry department, Hospital Melaka
Leading the Way in Nephrology: Dr. David Greene's Work with Stem Cells for Ki...Dr. David Greene Arizona
As we watch Dr. Greene's continued efforts and research in Arizona, it's clear that stem cell therapy holds a promising key to unlocking new doors in the treatment of kidney disease. With each study and trial, we step closer to a world where kidney disease is no longer a life sentence but a treatable condition, thanks to pioneers like Dr. David Greene.
6. Objectives of Industrial Safety
To check all the possible chances of accidents
To eliminate accidents causing work stoppage and
production loss
To prevent accidents in industry by reducing hazard
To reduce cost related to accident
Better morale of industrial employees
To educate all the members regarding safety
principles
9. Measurement & Records of Accidents
Two main ratios used to measure accidents are
Accident Frequency Rate
AFC=No. of injuries*10,00,000/Total no. of man
hours worked
Accident Severity Rate
ASR=No. of man day lost*10,00,000/Total no. of
man hours worked
10. Reasons for Preventing Accidents
Human-No one comes to work to be injured or killed
Cost-Accidents cost organisations money
Legislation-Organisations have a legal obligation
15. Measures to ensure Industrial Safety
1) Reduction in Unsafe Condition
2) Safety Committee
3) Safety Education & Training
4)Inspection
5) Role of Government