This 3D seismic survey was conducted over a coal mine reserve area to better define a geologic structure that could adversely impact longwall mining. The survey revealed an abrupt change in coal seam elevation, or "roll", that trends south into the reserve area before turning southeast. It also identified a deeper geologic structure beneath the roll that seismic time-slice sections suggest is a paleochannel meandering in a similar direction to the roll. Integrating borehole and seismic data using computer modeling, 3D block diagrams were generated showing the steep slope on the west flank of the roll that gradually decreases as it turns southeast. The high-resolution 3D seismic data provided valuable subsurface information to mine engineers for longwall panel development planning
A TRAINING ON GEOLOGICAL MAPPING AND METHOD OF URANIUM EXPLORATION IN AND ARO...Shivam Jain
A TRAINING ON GEOLOGICAL MAPPING AND METHOD OF URANIUM EXPLORATION IN AND AROUND PURNAPANI-TAMAJHURI-CHIRUDIH-PATHARGODA AREA, SHINGHBHUM SHEAR ZONE,
EAST SINGHBHUM DISTRICT, JHARKHAND
A TRAINING ON GEOLOGICAL MAPPING AND METHOD OF URANIUM EXPLORATION IN AND ARO...Shivam Jain
A TRAINING ON GEOLOGICAL MAPPING AND METHOD OF URANIUM EXPLORATION IN AND AROUND PURNAPANI-TAMAJHURI-CHIRUDIH-PATHARGODA AREA, SHINGHBHUM SHEAR ZONE,
EAST SINGHBHUM DISTRICT, JHARKHAND
Kutch is an East-west Oriented pericraton Rift basin Situated between Nagar Parkar Fault in North and Kathiawar Uplift in South.
Here we will discuss Geology and its Sequence Stratigraphy.
To review the geology of rare earth elements.
To discuss the various applications of rare earth elements in geological studies.
To review the geology of rare earth elements.
To discuss the various applications of rare earth elements in geological studies.
Abundance of REEs in Earth’s Crust ; Classification of Rare Earth Elements; Geology of REEs; APPLICATIONS OF REES; Application OF REEs in Geological Studies; APPLICATION OF REE TO PETROLEUM SYSTEMS; REE GLOBAL ECONOMIC SUPPLY AND DEMAND; Large and Giant Sized Deposits of the Rare Earth Elements
Gravity anomaly across reagional structuresAmit K. Mishra
Gravity Anomaly across continents and ocean, gravity anomaly across mid-oceanic ridges, gravity anomaly across orogenic belts, and gravity anomaly across subduction zones.
Ambiguity in Geophysics,Gravity,Magnetic,EM,MT
Error reduction by Available applications
Geosoft,Euler,Anaylitical,Equpotential,Spectral, Principal Components
Uranium as an Element , Radioactive Elements, Uranium Occurrences , Uranium Minerals, Uranium Ore Miner, Uranium Geology, Categories of Uranium Deposits, Unconformity-related Deposits , Breccia complex deposits, Sandstone deposits, Quartz-pebble conglomerate deposits, Limestone deposits, Surficial deposits, Volcanic deposits, Intrusive deposits, Metasomatite deposits, Vein deposits, Phosphorite and Lignite deposits, Uranium Resources, Production from mines, Known Recoverable Resources, Types of Uranium Deposits in Egypt, Main Occurrences, Gabal Gattar uranium, Uranium deposits of Um Ara area
1)Introduction and types of elements
2)Trace elements
3)Rare earth elements
4)The Oddo-Harkins rule
5)The lanthanide contraction
6)Europium anomaly
7)Cerium anomaly
8)REE partitioning among different minerals
9)Spider diagrams
10)Production and distribution of REEs
Geological Field report on Salt Range and Hazara AreaHamzaGujjar14
The Salt Range, unique field museum of Pakistan located south of Potwar Plateau. The World's second largest Salt mine is also located in this Range. It is the main supplier of Salt, Gypsum and Coal. Geological field report on Salt Range includes the history of formation of Salt Range when Indian Plate was movie towards North and collided with Eurasian plate, Geological structures and Formations of Eastern and Central Salt Range and Economical Importance of salt Range. Moreover in this report I also explained all formations of Hazara area and salt range.
Kutch is an East-west Oriented pericraton Rift basin Situated between Nagar Parkar Fault in North and Kathiawar Uplift in South.
Here we will discuss Geology and its Sequence Stratigraphy.
To review the geology of rare earth elements.
To discuss the various applications of rare earth elements in geological studies.
To review the geology of rare earth elements.
To discuss the various applications of rare earth elements in geological studies.
Abundance of REEs in Earth’s Crust ; Classification of Rare Earth Elements; Geology of REEs; APPLICATIONS OF REES; Application OF REEs in Geological Studies; APPLICATION OF REE TO PETROLEUM SYSTEMS; REE GLOBAL ECONOMIC SUPPLY AND DEMAND; Large and Giant Sized Deposits of the Rare Earth Elements
Gravity anomaly across reagional structuresAmit K. Mishra
Gravity Anomaly across continents and ocean, gravity anomaly across mid-oceanic ridges, gravity anomaly across orogenic belts, and gravity anomaly across subduction zones.
Ambiguity in Geophysics,Gravity,Magnetic,EM,MT
Error reduction by Available applications
Geosoft,Euler,Anaylitical,Equpotential,Spectral, Principal Components
Uranium as an Element , Radioactive Elements, Uranium Occurrences , Uranium Minerals, Uranium Ore Miner, Uranium Geology, Categories of Uranium Deposits, Unconformity-related Deposits , Breccia complex deposits, Sandstone deposits, Quartz-pebble conglomerate deposits, Limestone deposits, Surficial deposits, Volcanic deposits, Intrusive deposits, Metasomatite deposits, Vein deposits, Phosphorite and Lignite deposits, Uranium Resources, Production from mines, Known Recoverable Resources, Types of Uranium Deposits in Egypt, Main Occurrences, Gabal Gattar uranium, Uranium deposits of Um Ara area
1)Introduction and types of elements
2)Trace elements
3)Rare earth elements
4)The Oddo-Harkins rule
5)The lanthanide contraction
6)Europium anomaly
7)Cerium anomaly
8)REE partitioning among different minerals
9)Spider diagrams
10)Production and distribution of REEs
Geological Field report on Salt Range and Hazara AreaHamzaGujjar14
The Salt Range, unique field museum of Pakistan located south of Potwar Plateau. The World's second largest Salt mine is also located in this Range. It is the main supplier of Salt, Gypsum and Coal. Geological field report on Salt Range includes the history of formation of Salt Range when Indian Plate was movie towards North and collided with Eurasian plate, Geological structures and Formations of Eastern and Central Salt Range and Economical Importance of salt Range. Moreover in this report I also explained all formations of Hazara area and salt range.
A high-resolution 3D seismic velocity model of the 2010 Mw 8.8 Maule, Chile e...Stephen Hicks
Knowledge of the spatial distribution of seismic properties within an earthquake rupture zone is essential to our understanding of rupture mechanics. Following the Maule earthquake, there was an international collaborative effort to deploy a dense network of seismic instruments in order to record the aftershock sequence; this means a large dataset is available to perform seismic velocity tomography in the area of the rupture zone. Since most co-seismic slip occurred in the offshore region, it is important to interpret the velocity structure of the marine forearc and the underlying oceanic crust. However, since many aftershocks are located offshore, and thus outside of the land network, both the offshore velocity structure and the location of these aftershocks are inherently poorly resolved. During the period July - December 2010, The National Taiwan Ocean University and The University of Liverpool each deployed ocean-bottom seismometer (OBS) networks in the northern and southern ends of the rupture zone, respectively, comprising a total of 43 stations. We use a catalogue of ~500 seismic events recorded at both land and OBS stations, containing ~60000 hand-picked P- and S-wave travel-times. We use a staggered 1D inversion scheme, which initially incorporates a separate velocity model for the marine forearc in order to form better hypocentral locations for the offshore events. Based on previous estimates for slab geometry, we find that the location of offshore seismicity is more tightly constrained along and above the interface. Taking these improved locations into account, we then re-invert for a new 1D model with station corrections. We present a 3D local earthquake tomography model based on manually-picked arrival times. The incorporation of OBS picks into the inversion elucidates better both the up-dip geometry of the subducting plate and the structure of the marine forearc. Beneath the low vp marine forearc (vp < 6.0 km/s), at depths of 7-15 km, we infer the presence of a high velocity structure (vp > 7.0 km/s); the upper interface of which dips at 10-15°, interpreted as the top of the downgoing oceanic crust. These first-order features are in accordance with results from previous active source studies in the region. We continue to analyse the nature and geometry of velocity anomalies along and around the megathrust, and their relation to rupture models and aftershock distribution.
Filtering in seismic data processing? How filtering help to suppress noises. Haseeb Ahmed
To enhance the signal-Noise ratio different techniques are used to remove the noises.
Types of Seismic Filtering:
1- Frequency Filtering.
2- Inverse Filtering (Deconvolution).
3- Velocity Filtering.
The Top Skills That Can Get You Hired in 2017LinkedIn
We analyzed all the recruiting activity on LinkedIn this year and identified the Top Skills employers seek. Starting Oct 24, learn these skills and much more for free during the Week of Learning.
#AlwaysBeLearning https://learning.linkedin.com/week-of-learning
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
The October 2004 Mw=7.1 Nicaragua earthquake: Rupture process, aftershock loc...Gus Alex Reyes
The subduction zone off the Nicaragua
coastline has been the site of several large
earthquakes in the past decades, including
the 1992 tsunami earthquake that was
anomalous in the size of the tsunami relative
to moment release [Kanamori and
Kikuchi, 1993]. As a focus site for both
the MARGINS-SEIZE and SubFac initiatives,
it is an area of keen interest for
scientists interested in earthquake rupture
and volcanic processes.
Hydrogeological Application of Refraction Seismicsiosrjce
IOSR Journal of Environmental Science, Toxicology and Food Technology (IOSR-JESTFT) multidisciplinary peer-reviewed Journal with reputable academics and experts as board member. IOSR-JESTFT is designed for the prompt publication of peer-reviewed articles in all areas of subject. The journal articles will be accessed freely online.
Delineation of Hydrocarbon Bearing Reservoirs from Surface Seismic and Well L...IOSR Journals
Hydrocarbon reservoir has been delineated and their boundaries mapped using direct indicators from 3-D seismic and well log data from an oil field in Nembe creek, Niger Delta region. Well log signatures were employed to identify hydrocarbon bearing sands. Well to seismic correlation revealed that these reservoirs tied with direct hydrocarbon indicators on the seismic section. The results of the interpreted well logs revealed that the hydrocarbon interval in the area occurs between 6450ft to 6533ft for well A, 6449ft to 6537ft for well B and 6629ft to 6704ft for well C; which were delineated using the resistivity, water saturation and gamma ray logs. Cross plot analysis was carried out to validate the sensitivity of the rock attributes to reservoir saturation condition. Analysis of the extracted seismic attribute slices revealed HD5000 as hydrocarbon bearing reservoir.
Similar to High Resolution 3D Seismic: Coal Mine Fields (20)
Gravimetri Dersi için aşağıda ki videoları izleyebilirsiniz.
Link 01: https://www.youtube.com/watch?v=HTyjVaVGx0k
Link 02: https://www.youtube.com/watch?v=fUkfgI8XaOE
Geopsy yaygın olarak kullanılan profesyonel bir program. Özellikle, profesyonel program deneyimi yeni mezunlarda çok aranan bir özellik. Bir öğrencim çalışmasında kullanmayı planlıyor.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
1. GEOPHYSICS, VOL. 65, NO. 3 (MAY-JUNE 2000); P. 712–718, 9 FIGS., 2 TABLES.
High-resolution 3-D seismic survey over a coal mine
reserve area in the U.S.—A case study
Lawrence M. Gochioco∗
ABSTRACT
A high-resolution three-dimensional (3-D) seismic
survey was conducted in advance of coal mine devel-
opment in the Illinois basin in May 1989 to better define
a geologic structure with the potential to adversely affect
longwall mining conditions. The 3-D seismic data indi-
cate that an abrupt change in seam elevation, or roll, en-
countered near the northern property line trends south
into the reserve area and then turns southeast. A per-
sonal computer–based workstation was used to integrate
borehole and seismic data for modeling in which 3-D
block diagrams of the calculated seam elevations were
generated. The block diagrams show a steep slope on
the west flank of the roll that gradually decreases as the
roll turns to the southeast. The survey also reveals a ge-
ologic structure beneath the roll at an estimated depth
of 46–62 m. Horizontal time-slice sections of this feature
suggest the presence of a paleochannel that meanders
on a similar course as the roll, which apparently was
connected to a larger paleochannel system. A Conoco
high-frequency vibroseis unit was successfully used as
the seismic source to generate the high frequencies nec-
essary to detect and resolve the thin coal beds.
INTRODUCTION
Longwall mining has become the lowest cost underground
coal mining method because of its high productivity. Efficient
longwall mines require large coal reserve areas which are rel-
atively level and free of any significant geologic disturbances.
Therefore,itisvaluabletohavereliablesubsurfaceinformation
prior to longwall panel development. Surface seismic reflec-
tion surveying can augment an exploration drilling program
by providing continuous subsurface profiles between bore-
Presented at the 61st Annual International Meeting, Society of Exploration Geophysicists. Manuscript received by the Editor September 3, 1998;
revised manuscript received October 14, 1999.
∗
CONSOL Inc., Research & Development, 4000 Brownsville Road, Library, Pennsylvania 15129-9566. E-mail: lawrencegochioco@consolenergy.
com.
c 2000 Society of Exploration Geophysicists. All rights reserved.
holes (Ziolkowski and Lerwill, 1979; Ruskey, 1981; Fairbairn
et al., 1986; Greenhalgh et al., 1986; Lyatsky and Lawton,
1988; Gochioco and Cotten, 1989; Gochioco, 1991a; Henson
and Sexton, 1991). Conventional two-dimensional (2-D) seis-
mic surveys are normally conducted to evaluate seam conti-
nuity and to detect potential seam anomalies that may create
adverse mining conditions. However, 2-D seismic surveying
does not always provide an adequate image of the subsurface,
and misinterpretations may result when geologic anomalies are
small relative to spatial resolution, have unpredictable trends,
or have complex structures. Three-dimensional (3-D) seismic
surveys can enhance a conventional grid of 2-D survey lines
by providing more concentrated data over a specific target for
better imaging and mapping. Shallow 3-D seismic surveys ap-
plied to coal exploration have been previously conducted by
Krey (1978), Bading (1986), and Lambourne et al. (1990).
A 3-D seismic survey was conducted at a CONSOL mine
reserve in May 1989 as part of an exploration program to fully
evaluate the reserve prior to longwall mining. Another coal
minenorthofthereserveareaencounteredanabruptchangein
coal seam elevation, or roll (at the point marked X in Figure 1),
as well as other geologic anomalies which forced that mine to
leave behind several blocks of coal along the property line. Of
morethan 40 exploration holes drilled, a few boreholes within
the reserve encountered inseam anomalies apparently associ-
ated with the roll, suggesting that this structure may exist in the
CONSOL reserve, possibly connecting with a roll encountered
underground in the West Mains (marked Y in Figure 1). The
3-D study was conducted in an area (shown in Figure 1) where
a grid of 2-D seismic lines and borehole data suggest a rapid
change in both seam elevation and structure orientation. The
study area measured 293 × 512 m. Seven boreholes were lo-
cated in the 3-D study area, and information from these holes
was later used for control in the interpretation. In addition,
checkshot surveys also were conducted in several open bore-
holes prior to the 3-D survey, and numerous geophysical logs
(sonic and density) were gathered for subsequent modeling
studies.
712
2. High-Resolution 3-D Survey Over Coal Mine 713
GEOLOGIC SETTING
The coal seam of interest in the study area is the Illinois
No. 6 (Herrin) seam. The average seam thickness is 3 m, and
the overburden depth ranges from about 229 to 244 m. A thick
wedge of nonmarine shale immediately overlies the coal seam.
The shale is interpreted as a crevasse-splay deposit originating
from a major paleofluvial system which existed at the time of
peat accumulation. Splay deposits form when a river’s natu-
ral levees are breached by seasonal flooding or by a regional
rise in sea level. The flooding results in a wedge of clastic sedi-
ments which are deposited in the river’s flood plain or, in this
case, the peat swamp. A major paleochannel system delineates
the western limit of possible mining in the reserve block. At
this limit, the coal seam is completely or partially replaced by
sandstones, siltstones, conglomerates, interbedded sandstones,
or shales. The paleochannel and its associated tributaries are
also responsible for a variety of other geologic anomalies that
may adversely affect the mining of coal in the reserve area
(Nelson, 1983).
Another coal seam, identified as the Illinois No. 5 (Spring-
field) seam, has an average seam thickness of 1.2 m and lies
on a nearly horizontal plane beneath the No. 6 seam. The av-
erage interval between the No. 6 and No. 5 seams ranges from
4 to 7.6 m. However, several boreholes in the reserve area re-
vealed the elevation of the No. 6 seam to be as much as 9.1
m higher than expected. This abrupt change in seam elevation
suggeststhattheNo.6seamwasdepositedoveraninfillchannel
or thicker lens of sandstone rock that, upon vertical compac-
FIG. 1. Map of coal reserve area showing grid of 2-D seismic
survey lines and location of 3-D survey conducted.
tion, produced locally steep dips which may have abruptly
thinned the coal seam, thus impeding longwall mining. Fig-
ure 2 shows a geologic cross section of the roll encountered
by drilling and confirmed in a nearby underground coal mine
located to the north (Nelson, 1983).
FIELD ACQUISITION AND DATA PROCESSING
The survey employed a total of 33 closely-spaced parallel
seismic lines. Seismic line 1, the northernmost survey line,
was oriented west to east. The remaining 32 survey lines were
placed at 9.1-m intervals toward the south. A Conoco proto-
typehigh-frequencyvibroseis(Chapmanetal.,1981;Gochioco,
1991a), built in 1974, was used as the seismic source. A MDS-
15 seismograph system was used to record and store the data
on magnetic tapes. The survey used 24-channel recording and
employed a source-receiver interval of 9.1 m, resulting in a
maximum stacking fold of 12. Single high-frequency 100-Hz
geophones were used as receivers. Table 1 shows additional
field acquisition parameters used in this survey.
CONSOL and Conoco had already established a working re-
lationship by 1986 in which CONSOL has been using Conoco’s
software programs to process its high-resolution seismic data
through a computer network linking the two research centers.
Field tapes were then sent to Conoco’s data processing center
in Ponca City, Oklahoma. Conoco technicians assisted in data
preparation such as tape handling, demultiplexing, and vibro-
seis correlation. Thereafter, the reformatted seismic data files
were then processed accordingly from Library, Pennsylvania,
where job files were executed and plot files received. Careful
editing of seismic traces and application of velocity filters were
employed to improve the signal-to-noise ratio. Table 2 shows
the general processing sequence flow used to process the high-
resolution 3-D seismic data.
COMPUTER MODELING
In February 1987, CONSOL acquired and developed a PC-
based seismic interactive interpretation workstation that can
be used to integrate various geological and geophysical data
sets in order to generate reliable computer models (Gochioco,
1991b). Sonic and density logs in an analog format were digi-
tized and stored in the database. Log data were used to develop
reflectivity models near the drillhole locations. Synthetic seis-
mograms generated from geophysical logs were then used to
determine the seismic response associated with the No. 6 and
No. 5 coal seams. Figure 3 shows the digitized density and sonic
logs collected from borehole No. 87196 in the study area, which
encountered normal seam thickness and elevation for the two
coal seams. A 150-Hz Ricker wavelet having a frequency spec-
trum similar to the recorded wavefield was then convolved with
the reflectivity sequence to generate the desired synthetic seis-
mogram. The results indicate the anticipated seismic response
in normal polarity for the two coal seams.
In a previous paper (Gochioco, 1992), the same seismic and
borehole data sets located in the 3-D study area were modeled
todemonstratethephenomenaofinterferencereflectionsfrom
coal seams and thin bed cyclothems. In this paper, a simple 2-D
model is presented. Figure 4a shows a 2-D geologic model with
the two coal seams bounded by a massive sandy shale unit.
Acousticpropertiesofthesetworocktypeswereobtainedfrom
3. 714 Gochioco
FIG.2.Geologiccrosssectionofarollencounteredinanearbymine(fromNelson,1983).
log data and are noted in the figure. The exploration drilling
program revealed the No. 5 seam lies on a nearly horizontal
plane in the reserve area. To simulate increasing seam separa-
tion, the No. 6 seam was inclined at an angle of 5◦
while seam
thicknesses of both coals were kept constant. The interval be-
tween the tops of the two coal seams gradually increases over a
horizontal distance of 137 m from the average observed value
of 6 m on the left side of the model to a maximum of 18.3 m
on the right. Figure 4b shows the synthetic seismic response
of the model after convolution with a 150-Hz Ricker wavelet.
Table 1. Data acquisition parameters.
Seismic source: Conoco prototype high-frequency
vibroseis
Maximum peak force: 33,000 lb
Electronics: Pelton No. 5
Frequency range: 60–250 Hz, nonlinear sweep
Recording system: Geosource MDS-15
Sample rate: 1.0 ms
Record length: 16 s
Sweep length: 15 s
Number of channels: 24
Receiver: Single 100-Hz geophone
Source-receiver interval: 9.1 m, offend shooting
Maximum fold: 12
Near offset: 55 m
Far offset: 265 m
Table 2. Seismic data processing sequence.
Vibroseis correlation
Apply geometry to header
Edit field records
Bandpass filter and trace expansion/gain
FK velocity/dip filter
Deconvolution
Velocity analysis (1)
CDP stack
Statics (1)
Velocity analysis (2)
Statics (2)
Bandpass filter and trace expansion/gain
Final CDP stack
3-D FK migration
FIG. 3. Digitized sonic and density logs from a borehole show-
ing normal seam thickness and elevations for the No. 6 and
No. 5 coals. The synthetic seismogram was generated after con-
volving the reflectivity sequence with a 150-Hz Ricker wavelet.
4. High-Resolution 3-D Survey Over Coal Mine 715
The seismic traces in Figure 4b are 9.1 m apart. In the case
of the average 6 m interval between the two coal seams, the
model shows normal wavelet characteristics in the No. 6 and
No. 5 reflections, similar to results from the synthetic seismo-
gram in Figure 3. However, as the seam separation increases,
corresponding amplitude anomalies are observed in the No. 5
reflection. This wavelet character is the seismic signature of
the roll and it proved to be a more reliable indicator than a
change in arrival time for the No. 6 reflection. The amplitude
anomalies result from constructive interference of overlapping
primary reflections from the coal seams and thin-bed interfaces
(Gochioco, 1992).
RESULTS AND INTERPRETATION
Figure 5 shows seismic sections from lines 4, 12, 20, and 28.
The four parallel seismic sections, spaced 73 m apart, provide
a good perspective view of the structure of the roll as well
as the rapid change in its trend. The robust reflection at 0.1 s
was associated with a major limestone-shale interface which
is dominant in the area. Based on checkshot and sonic log in-
formation, reflections associated with the No. 6 and No. 5 coal
seams were estimated to arrive between 0.135 and 0.145 s, and
are noted in the figures. Another structure, referred to here as
FIG. 4. A 2-D geologic model (a) for simulating increasing spa-
tial interval between the two coal seams. After convolution
with a 150-Hz Ricker wavelet, the synthetic seismic response
of the model (b) highlights the effects of seam separation, cre-
ating amplitude anomalies in the No. 5 coal seam reflection.
an anomalous geologic structure (AGS), was identified by the
large reflection amplitude (blue) beneath the two coal seams.
The AGS will be discussed later in the text.
The seismic data gathered beneath line 4 show a temporal re-
lief of about 4 ms for the No. 6 reflection (yellow) with the apex
centeredatshotpoint(SP)25.AnamplitudeanomalyintheNo.
5 reflection is also evident between SP-18 and SP-33, indicating
an increased separation between the two seams associated with
the roll. The 137-m width of this interval closely corresponds
to the width of the block of coal left behind along the property
line. This observation also suggests the anomalous roll trends
south from the property line toward the northern section of the
study area. The processed data from lines 12, 20, and 28 shows
that the western slope of the roll gradually tapers off. Consid-
ering reflection amplitude, the primary reflection associated
with the No. 6 seam may be altered by destructive interference
from other overlapping primary reflections and, possibly, in-
trabed multiples, which caused temporal relief to be an unreli-
able indicator of the roll. However, as a result of the increased
separation between the two coal seams, the No. 5 reflection
encountered mostly constructive interference creating an am-
plitude anomaly. This phenomenon is present in all four seismic
sections, and the estimated centers of the amplitude anomalies
from lines 12, 20, and 28 are located near SP-29, SP-41, and SP-
50, respectively. This interpretation of the seismic data suggests
the roll feature remains the same and turns sharply southeast,
meandering outside the study area near line 28.
FIG. 5. Seismic sections of lines 4, 12, 20, and 28.
5. 716 Gochioco
Since the end users of the 3-D seismic data are mine engi-
neers and geologists with minimal seismic experience, a 3-D
block diagram showing the calculated seam elevations is pre-
sented to highlight the roll rather than time-slice sections. In
order to generate a seam elevation map of the No. 6 seam in
the study area, the No. 5 seam was mapped on a horizontal
plane. Velocity and drill hole information coupled with results
of the amplitude modeling studies of Figure 4, were used to
calculate the estimated bottom seam elevations of the No. 6
coal from seismic traces in all 33 survey lines. A 3-D block dia-
gram (Figure 6) was then generated to illustrate the structure of
the roll. The locations of seven drill holes are also shown. The
block diagram provided a perspective view of the roll from the
southeast direction. A vertical exaggeration of 4:1 was used to
highlight the rapid change in seam elevation. The model shows
that the roll strikes south from the property line and that it
has a steep slope on its western flank which could pose difficult
longwall mining conditions. However, the slope is predicted to
gradually decrease to the southeast. The east side of the roll
apparently levels off at a higher seam elevation than on the
west.
As mentioned earlier, the strong reflection arriving between
0.150 and 0.170 s, identified as AGS in Figure 5, was recorded
beneath the two coal seam reflections. Based on interval ve-
locity information derived from stacking velocities, the AGS
is estimated to lie from 46 to 62 m beneath the No. 6 seam.
The seismic sections of lines 4 and 12 (see Figure 5) indicate
a possible vertical displacement or fault. The two subsequent
seismic sections (lines 20 and 28) suggest the anomaly grad-
ually decreases in magnitude and appears to mend itself as it
turned to the southeast.
Initially, no information was available from CONSOL’s
drilling program about the AGS since the holes in the reserve
area penetrated no deeper than 1–2 m below the No. 5 seam.
However, the Illinois State Geological Survey documented ob-
servations from dozens of deeper core holes drilled in the
region in petroleum exploration (Brownfield, 1954). A chart
taken from Nelson (1983) is presented in Figure 7 showing
the various rock groups developed from core samples, electric
FIG. 6. Three-dimensional block diagram showing the struc-
ture of the roll. Each color contour corresponds to a 1.5-m
interval.
logs, and density logs. The No. 5 and No. 6 coal seams belong
to the Pennsylvanian Carbondale formation, as indicated on
the chart. Using the vertical scale on the chart and the calcu-
lated depth of this structure beneath the No. 6 seam, the AGS
corresponds to a massive sandstone-shale unit on the upper
sequence of the Pennsylvanian Caseyville-Tradewater forma-
tion. The presence of the No. 2 seam located above this forma-
tion likely enhanced the acoustic impedance contrasts between
rock layers creating larger than normal reflection amplitudes.
FIG. 7. Chart shows the general lithology and rock groups of
the area developed from core samples, electric, and density logs
(Brownfield, 1954).
6. High-Resolution 3-D Survey Over Coal Mine 717
Therefore, the AGS reflection may also signify the geologic
boundary of these two different rock groups.
Six horizontal time-slice sections ranging from 0.161 to
0.166 s are presented in Figure 8. These time-slice sections
reveal the structure of the main bench of the AGS, and the
results show the signature of a small paleochannel, which me-
anders on a similar course as the roll, beneath the study area
and connected to a larger channel system located in the south-
west corner. Seismic detection of two different Pennsylvanian
channels, one on top of another and having the same trend,
supports some earlier research studies conducted by Illinois
State Geological Survey geologists (Nelson, 1983).
Since paleochannels are widespread in this region and some
can have serious effects on coal mining, detecting and map-
ping these geologic anomalies could minimize underground
mining problems. In this case, experience proved that the roll
can pose difficult longwall mining conditions in the No. 6 seam.
Basedoninformationprovidedbyundergroundmining,aswell
FIG. 8. Time-slice sections near the AGS, indicating a small paleochannel that meandered to the southeast beneath the study area
and connected to possibly a larger paleochannel system.
as seismic and drill hole data, Figure 9 shows the interpreted
trend of the serious effects of the roll feature as it meanders
across the reserve block and connects with the roll encountered
in the West Mains. This is consistent with the trends defined
by the 3-D seismic survey. Due, in part, to the data provided
by the seismic survey, this reserve block was developed with
caution and mine development was adjusted accordingly. Panel
lengths were terminated at steep slopes encountered during de-
velopment. Since the roll was less severe near the West Mains,
panel E was completely developed along its entire initial pro-
posed length. Panel lengths were shortened for panels F and G,
which extend up to only the western flank of the roll because
of steep slope encounters of as much as 15◦
to 20◦
. The fourth
proposed panel, north of panel G, was eventually eliminated
because the anticipated anomaly encounter would have made
the panel too short to be mined economically. With a revised
mine plan, mining of the reserve block was completed in 1995
with minimal difficulty.
7. 718 Gochioco
FIG. 9. The interpreted trend of the roll (red). As a result of
the interpretation, proposed longwall panels in this reserve
block were reduced from four panels to three, and subse-
quently shortened and staggered along the western flank of the
roll.
CONCLUSIONS
Whenunexpectedanomalousgeologicencountersoccurthat
causes a longwall mine to be inoperative for days or weeks, it
is estimated that they can cost a coal company up to $1 mil-
lion/day of lost productivity. Most coal companies do not have
deep financial resources to weather such extended downtime.
Thus, it is imperative that coal companies gather subsurface in-
formation. Knowing the origin of these anomalies is also help-
ful in identifying geologic settings which may spawn similar
anomalies. When surface seismic surveys are used in conjunc-
tion with drilling, subsurface geological information can assist
mine engineers in developing optimal mine plans. In particu-
lar, when geological features that could impact longwall mining
are narrow and have unpredictable trends, 3-D seismic surveys
can be a valuable tool to further enhance coal exploration pro-
grams, as demonstrated in this case. Most of the geological
anomalies encountered in the study region are channel-like
features developed while the coal-forming peat accumulated
in vast tropical swamps during the Pennsylvanian. Some Penn-
sylvanian channels already existed as the peat was accumulat-
ing; later channels scoured and ripped the peat when rivers
changed course or overflowed banks.
A PC-based geoscience workstation was useful in integrat-
ing geological and geophysical data sets for crosscorrelating
and generating computer models to enhance the interpreta-
tion process. In this instance, the 3-D block diagrams provided
a perspective view of the calculated base elevation of the tar-
get coal seam to show a detailed representation of the roll. This
information assisted mine personnel in determining the feasi-
bility of longwall mining in this area. Eventually, the anomaly
was confirmed and encountered at the predicted location dur-
ing development and panel lengths were shortened appropri-
ately.Inaddition,Conoco’sprototypehigh-frequencyvibroseis
demonstrated that a system such as this can be used as a seismic
source for shallow high-resolution surface seismic surveys.
ACKNOWLEDGMENTS
The author thanks the reviewers for their constructive com-
ments and CONSOL management for supporting the coal geo-
physics program and granting permission to release this paper
for publication. Special thanks are extended to CONSOL mine
engineers and geologists, and Conoco technicians for their
team effort and valuable support.
REFERENCES
Bading, R., 1986, How to optimize 3-D seismic land surveys—Some
rules for areal data gathering, in Buchanan, D. J., and Jackson, L. J.,
Eds., Coal geophysics: Soc. Expl. Geophys. Reprint 6, 211–236.
Brownfield, R. L., 1954, Structural history of the Centralia area: Illinois
St. Geol. Surv. Report of Investigations 172.
Chapman, W. L., Brown, G. L., and Fair, D. W., 1981, The Vibroseis
system: a high-frequency tool: Geophysics, 46, 1657–1666.
Fairbairn, C. M., Holt, J. M., and Padget, N. J., 1986, Case histories of
the use of surface seismic method in the U.K. coal mining industry;
in Buchanan, D. M., and Jackson, L. J., Eds., Coal geophysics: Soc.
Expl. Geophys. Reprint 6, 188–203.
Gochioco, L. M., 1991a, Advances in seismic reflection profiling in U.S.
coal exploration: The Leading Edge, 10, No. 12, 24–29.
——— 1991b, Applications of the seismic interactive interpretation
workstation for the coal industry: Mining Eng., 43, 1057–1061.
——— 1992, Modeling studies of interference reflections in thin-
layered media bounded by coal seams: Geophysics, 57, 1209–1216.
Gochioco, L. M., and Cotten, S. A., 1989, Locating faults in under-
ground coal mines using high-resolution seismic reflection tech-
nique: Geophysics, 54, 1521–1527.
Greenhalgh, S., Suprajitno, M., and King, D., 1986, Shallow seismic
reflection investigations of coal in the Sydney Basin: Geophysics,
61, 1426–1437.
Henson, H., and Sexton, J. L., 1991, Premine study of shallow coal
seams using high-resolution seismic reflection method: Geophysics,
56, 1494–1503.
Krey, T., 1978, Reconciling the demands of 3-D seismics with those
of improved resolution: Presented at 48th Ann. Mtg., Soc. Expl.
Geophys.
Lambourne, A. N., Evans, B. J., and Hatherly, P., 1990, Areal coal seam
mapping by 3-D seismic reflection surveying: A case history from
the Sydney Basin, Australia: 60th Ann. Internal. Mtg., Soc. Explor.
Geophys., Expanded Abstracts, 726–728.
Lyatsky, H., and Lawton, D., 1988, Application of the surface seis-
mic reflection method to shallow coal exploration in the plains of
Alberta: Can. Jour. Expl. Geophys., 24, No. 2, 124–140.
Nelson, W. J., 1983, Geologic disturbances in Illinois coal seams: Illinois
St. Geol. Surv. Circular 530.
Ruskey, F., 1981, High-resolution seismic methods for hard-rock min-
ing: U.S. Bur. Mines Information Circular 8891, 4–28.
Ziolkowski, A., and Lerwill, W. E., 1979, A simple approach to high-
resolution seismic profiling for coal: Geophys. Prosp., 27, 360–393.