This document summarizes a presentation on green coal technology given by eight students from the Durgapur Institute of Advanced Technology and Management. It discusses technologies like integrated gasification combined cycle (IGCC) and circulating fluidized bed combustion (CFBC) that allow for more efficient and environmentally friendly use of coal for power generation in India. The document outlines India's growing power needs and goals to develop clean coal technologies domestically to increase capacity while lowering emissions.
Catalytic Reforming Process is one of the most important processes in the petroleum and petrochemical industries which produce high octane number gasoline.
It explains about flames, types of flames, flame instabilities, stability techniques, and some CFD result of stabilized flame after using different techniques.
Catalytic Reforming Process is one of the most important processes in the petroleum and petrochemical industries which produce high octane number gasoline.
It explains about flames, types of flames, flame instabilities, stability techniques, and some CFD result of stabilized flame after using different techniques.
These slides are developed for a part of the undergraduate course in Petroleum Refinery Engineering. The slides are also helpful for Masters level introductory course.
These slides are developed for a part of the undergraduate course in Petroleum Refinery Engineering. The slides are also helpful for Masters level introductory course.
Future carbon capture R&D efforts need to focus on cost reductions in three main areas: materials, processes and equipment. In this webinar Ron Munson, the Institute’s Principal Manager – Capture, gave an overview of the current directions in carbon capture R&D, including development of higher performance solvents, sorbents and membranes; process improvements and intensification; equipment development; and novel equipment designs.
Environmental regulations on coal in thermal power plant of india GauravThote3
tell about the environmental regulation act, India's dependence on coal, the type of coal used in Indian power plants, the technologies used to reduce the carbon emissions
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
4. INTRODUCTION
Green coal technology is a collection of technologies being developed
to attempt to help lessen the environmental impact of coal energy
generation.
Green coal technology usually addresses atmospheric problems
resulting from burning coal.
Green coal technology helps to mitigate worldwide climate change.
5. GREEN COAL TECHNOLOGIES
GREEN Coal Technologies are
defined as ‘technologies designed to
enhance:
Efficiency of conversion
Environmental acceptability of coal
extraction, preparation and use.
7. DEMAND PROJECTION
YEAR 2012 CAPACITY ADDITION BY SECTORS
• Central 46,500 MW
• State & IPP 41,800 MW
• NCES 10,700 MW
• Nuclear 6,400 MW
• Total 105,400 MW
YEAR 2020 MIX OF GENERATION
• Thermal 326,000MW
• Renewable & Hydro 104,000 MW
• Nuclear 20,000 MW
• Total 450,000 MW
8. INDIA AMONGST TOP SIX EMITTERS
OF CO2
Country Total emission Percentage of
(Million Tonnes of CO2) world emission
USA 5470 24%
China 3121 14%
Russian Federation 1456 6%
Japan 1173 5%
Germany 884 4%
India 881 4%
9. VISION 2020
PROGRAM
Post combustion Clean-up-
Desulfurization
(FGC systems) Supercritical
In-combustion Clean-up
Fluidized bed
combustion (CFBC,
PFBC, AFBC)
Gasification using +
fluidized bed, moving bed
or Entrained bed Gasifiers
Pre combustion Clean-
up beneficiation/washing
Technologies for utilization of Coal for Power Generation with minimal
pollutants discharged to the atmosphere (Reduced CO2, Sox, Nox,
SPM) at high conversion efficiency……….World Coal Institute.
CLEAN COAL
TECHNOLOGIES
10. GREEN COAL TECHNOLOGIES
• Mining Management & Practices
(Reduction of Extraneous
material)
• Coal Preparation Process after mining to improve
inherent & Extraneous material
(washing & beneficiation)
• Conversion Technologies IGCC and PFBC
• Post combustion cleaning Particulate and gaseous
pollutants removal
(Environmental requirement)
11. IGCC TECHNOLOGY ...
• Gasification of coal is the cleanest way of utilization of coal.
• With the help of this technology, power generation offers the
benefits of very low emissions and efficiencies of the order of
44-48%.
• The comparative indices show that in case of IGCC, emission of
particulate, NOx and SOx are:
7.1%, 20% and 16%, respectively, of the
corresponding emissions from PC plant.
12. IGCC ...
• Three major areas of technology that will contribute to
improvements in IGCC are :
hot gas de-sulfurisation
hot gas particulate removal
advanced turbine systems
14. DEVELOPMENTAL GOALS FOR IGCC
• To utilize India’s low grade coal for power generation with
improved plant efficiency.
• To introduce coal gas in Natural Gas based Combined
Cycle Plants in a phased manner.
• To increase power generation capacity at the level of
present emission.
• To develop state of Art Technology for Indigenous and
Export Markets.
15. IGCC DEVELOPMENT PROGRAM IN INDIA
MAJOR MILE STONES:
• Choice of gasification for high ash coals by BHEL
• 6.2 MW IGCC demonstration plant established by BHEL both with
Moving Bed and Fluidized Bed.
• Coal Characterization by BHEL & IICT for gasification application.
• Intensive data generated by IICT on oxygen-steam gasification in their
Moving Bed gasifier.
• Task force CEA, CSIR, NTPC & BHEL constituted to assess
technological maturity & Financial requirement for a green field IGCC
plant of 100 MW capacity at Dadri (NTPC).
• BHEL, CSIR & NTPC prepared proposal for setting up of this 100 MW
IGCC demonstration plant.
16. • Circulating Fluidized Bed Combustion (CFBC)
technology has selectively been applied in India
for firing high sulphur refinery residues, lignite,
etc.
CFBC Technology is superior to PC Power Plant
Technology:
• Lower NOx formation and the ability to capture
SO2 with limestone injection the furnace.
Circulating fluidized Bed Combustion
17. Steam to Super Heater
Cyclone
Furnace
Coal Feed
Hopper
Ash Cooler
Back-Pass
ESP
External
Heat-Exchanger
HPAir
Circulating Fluidised Bed Boiler
18. • Good combustion efficiencies comparable to PC Power
Plants.
• The heat transfer coefficient of the CFB furnace is
nearly double that of PC which makes the furnace
compact.
• Fuel Flexibility: The CFB can handle a wide range of
fuels such as inferior coal, washery rejects, lignite,
anthracite, petroleum coke and agricultural waste with
lower heating.
Circulating fluidized Bed Combustion
19. CONCLUSION
• The future of green coal technologies is bright and they will definitely
play a key role in global efforts of reduction in environmental impact
of power generation.
• The clean coal technologies offer: more efficient power generation
and cleaner power generation (reduction in GHG emission).
• The recent developments in clean coal technologies have been very
encouraging and have increased possibility of reaching ‚near-zero–
emission power generation.
