3. Fast roll change.
Fabric threading and rewinding
functions.
Simple and effective tension control.
Modular design, compatible with the
Delta series kits for maximum
flexibility.
5. Ultra fast roll change.
Automatic threading system.
Realtime tension control.
Irregular spread programming:
dimensions, quantities, sizes and
fabrics.
Microprocessor controlled.
Can be connected to LCS (Laying
Control System) for total cutting room
management and control.
Programmable from a PC.
8. This consists of straight knife cutting
machine on an articulated arm at the
side of the cutting table.
This system has a servo driver which
enables the cutting machine to be
moved easily in all directions while
maintaining the right angle between
the blade and the table
10. The process involves the use of
hydraulic press which forces the
shaped metal cutting through a pile of
material and is mostly used when
large quantities of small components
have to be cut very accurately
Press cutting is also often used for
cutting many of the components for
leather and suede garments
12. Laser cutting is a technology that uses a laser to
cut materials, and is typically used for industrial
manufacturing applications, but is also starting to
be used by schools, small businesses, and
hobbyists.
Laser cutting works by directing the output of a
high-power laser, by computer, at the material to
be cut.
The material then either melts, burns, vaporizes
away, or is blown away by a jet of gas, leaving an
edge with a high-quality surface finish.
Industrial laser cutters are used to cut flat-sheet
material as well as structural and piping materials
14. Plasma cutting is a process that is used to
cut steel and other metals of different
thicknesses (or sometimes other materials)
using a plasma torch.
In this process, an inert gas (in some units,
compressed air) is blown at high speed out of
a nozzle; at the same time an electrical arc is
formed through that gas from the nozzle to
the surface being cut, turning some of that
gas to plasma.
The plasma is sufficiently hot to melt the
metal being cut and moves sufficiently fast to
blow molten metal away from the cut.
16. Ultra-Cutter Ultrasonic Cutting Systems are
designed to cut textiles thermoplastic films,
rubber woven and non-woven fabrics.
Ultrasonic Cutting Systems can be operated
as hand-held units or incorporated into
automated machinery
Solid, one-piece construction of horn blade
virtually eliminates breakage and energy loss
17. Minimal blade flexure yields straighter
cuts without having to support the
blade
Compatible with Dukane ultrasonic
probe systems
Available in 20, 30 or 40 kHz
frequencies
19. A water jet cutter, also known as a water
jet or waterjet, is an industrial tool capable of cutting
a wide variety of materials using a very high-
pressure jet of water, or a mixture of water and
an abrasive substance.
The term abrasivejetrefers specifically to the use of
a mixture of water and abrasive to cut hard materials
such as metal or granite, while the terms pure
waterjet and water-only cutting refer to waterjet
cutting without the use of added abrasives, often
used for softer materials such as wood or rubber.
20. SEWING MACHINES
1.Over edging machine
• Companies call it
“small machine”
• It finishes the raw
edges of the
pattern for
construction
21. 2.High speed lokstitch sewing machine
•This is sometimes
called “Straight
Stitching
machine”or
industrial sewing
machine.
•It has automatic
lubrication and
used by tailors and
dressmakers
22. 3.Double needle machine
This is used for
construction of the
different kinds of
the different kinds
of clothing
especially for the
inseam,outseam
and side seam.
23. 4.BARTACKING MACHINE
Bar tack is a series of
hand or machine
made stitches used for
reinforcing areas of
stress on a garment,
such
as pocket openings,
bottom of a fly opening
or buttonholes.
24. It consists of a series of close-set zig-
zag stitches (machine) or whip
stitches (hand), usually 1/16"-1/8" in
width and 1/4"-3/8" in length.
Indenim jeans, it is often in a
contrasting color, such as orange or
white.
25. Permits tubular fabric spreading
directly from the pallet.
High productivity.
Reduction of inventory losses and
loading times.
Realtime tension control.
Microprocessor controlled.
Available up to 500 kg.