This document provides an overview of error proofing techniques. It begins with objectives and logistics for a workshop on error proofing. It then discusses the basic principles of error proofing, including achieving zero defects through prevention of errors at their source. Several examples are given of companies that significantly reduced defects through error proofing. Common causes of errors like adjustments, tooling changes, and production conditions that can lead to defects are identified. Inspection techniques like source inspection are described. Finally, specific error proofing devices and how to implement them are covered.
How can we prevent accidents caused by human error? This presentation deals with typical examples of severe accidents related to human errors, and shows methods to prevent them.
Lean Standard or Standardized Work Training ModuleFrank-G. Adler
The Lean Standard Work Training Module v3.0 includes:
1. MS PowerPoint Presentation including 66 slides covering the History of Lean Manufacturing, Five Lean Principles, The Seven Lean Wastes, Introduction to Lean Standard Work (Introduction, Objectives, Benefits), Basic Requirements of Lean Standard Work, Step-by-Step Process using the Four Lean Standard Work Worksheets & Examples, Takt & Cycle Time, Work Balancing, Quick Changeovers, and Kanban Solutions.
2. MS Excel Process Study Worksheet Template
3. MS Excel Process Capacity Worksheet Template & Example
4. MS Excel Work Chart Template & Example
5. MS Excel Work Combination Table Template & Examples
How can we prevent accidents caused by human error? This presentation deals with typical examples of severe accidents related to human errors, and shows methods to prevent them.
Lean Standard or Standardized Work Training ModuleFrank-G. Adler
The Lean Standard Work Training Module v3.0 includes:
1. MS PowerPoint Presentation including 66 slides covering the History of Lean Manufacturing, Five Lean Principles, The Seven Lean Wastes, Introduction to Lean Standard Work (Introduction, Objectives, Benefits), Basic Requirements of Lean Standard Work, Step-by-Step Process using the Four Lean Standard Work Worksheets & Examples, Takt & Cycle Time, Work Balancing, Quick Changeovers, and Kanban Solutions.
2. MS Excel Process Study Worksheet Template
3. MS Excel Process Capacity Worksheet Template & Example
4. MS Excel Work Chart Template & Example
5. MS Excel Work Combination Table Template & Examples
Visual management is an integral part of a Lean management system. Visual management uses displays, metrics and controls to help establish and maintain continuous flow, and giving everyone a view of the work along the value stream. It includes a set of techniques that make operation standards visible so that people can follow them more easily. These techniques expose waste so that it can be prevented and eliminated.
LEARNING OBJECTIVES:
1. Understand that visual management is an integral part of Lean transformation
2. Familiarize with the common visual tools such as red tagging, activity boards, A3 storyboards, mistake-proofing, one-point lessons, standard work, kanban, etc.
3. Gain knowledge on how to apply visual tools to add structure and stability to operations, reducing variation and increasing efficiency
CONTENTS:
Introduction
5S - The foundation for a visual workplace
Types of visual management
Visual displays
Visual metrics
Visual controls
Mistake-proofing
Andons
Warning sensors
Common visual tools
Red tagging
Activity board
A3 storyboard
One-point lesson
Standard work chart
Takt time versus actual
Kanban
To download this complete presentation, please visit: http://www.oeconsulting.com.sg
Download the presentation together with train-the-trainer guide and workshop templates at http://wcm.nu
This presentation is made by Oskar Olofsson, WCM Consulting AB
Make changes in the background template if you want to change the appearance
Learn What is Poka Yoke, Elements of Error Proofing, General Inspection, Error Proofing Devices, Ways to Mistake Proofing, Common Sources of Errors, Poka Yoke Principle and much more.
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
The goal of Total Productive Maintenance (TPM) is to increase equipment effectiveness so that each piece of equipment can be operated to its full potential and maintained at that level. To maximize equipment effectiveness, you need a measurement tool that can help you understand your equipment problems so that you can take steps to eliminate them. The key to this understanding is Overall Equipment Effectiveness (OEE).
OEE is a crucial measure in TPM that tells you how well your equipment is running. It links three elements in one percentage: the time the machine is actually running, the quantity of products the machine is turning out, and the quantity of good output.
LEARNING OBJECTIVES
1. Understand the concept and philosophy of TPM and its relationship with OEE
2. Explain the importance of OEE and how it relates to value-adding work of the factory
3. Understand OEE concepts such as Availability, Performance, Quality and the Six Major Losses
4. Describe the steps of collecting and processing OEE data and reporting results
5. Define approaches for reducing equipment-related losses to raise OEE
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
To become a Lean enterprise, office activities must fully support shop-floor manufacturing operations to eliminate waste. The adoption of 5S throughout all office functions is the first step to increase efficiency.
This presentation provides a blueprint for building a Lean foundation for your office. You will learn how to mobilize and align your management team to launch or improve 5S in your office. The presentation covers 5S and Visual Management key concepts, best practices, step-by-step implementation guidance, and how to kick-start 5S in your organization to achieve sustainable world-class excellence.
LEARNING OBJECTIVES:
1. Understand the benefits of working in a clean and neat environment
2. Identify waste in the office
3. Define the 5S principles, and identify visual tools
4. Explain how to apply the 5S principles and visual tools to enhance office organization
5. Learn how to kick start a 5S initiative
6. Define the critical success factors for 5S implementation
CONTENTS:
Introduction & Overview
5S Lays the Foundation for a Lean Enterprise
5S Helps to Eliminate Waste
What is 5S?
Benefits of 5S
5S Principles - Step by Step
How to Conduct a Red Tagging Exercise
Creating a Visual Office
5S Applications
5S Implementation
Starting & Launching a 5S Initiative
5S Audit System & Maturity Levels
5S & Kaizen
Supporting Lean Tools for 5S
Critical Success Factors
To download this complete presentation, please go to: http://www.oeconsulting.com.sg
Hand in hand with 5S implementation is creating Visual Factory. Use of signage, demarcation lines, quality inspection points, easy to ready guages and dials
POKA-YOKE - A Lean Strategy to Mistake ProofingTimothy Wooi
A Lean Strategy in Human Error Prevention aims to detect and correct possible error immediately, eliminating defects at the source.
Poka-Yoke overcome the inefficiencies of inspection through the use of automatic devices that seek,
1.Not to accept a defect for the process
2.Not to Create a Defect
3.Not to Allow a Defect to be passed to the next process
Its purpose is to eliminate product defects by preventing, correcting, or drawing attention to human errors as they occur.
The concept was formalized, and the term adopted, by Shigeo Shingo as part of the
Toyota Production System.
It was originally described as baka-yoke, meaning "fool-proofing“ or “idiot proofing” but the name was later changed to the milder poka-yoke.
Visual management is an integral part of a Lean management system. Visual management uses displays, metrics and controls to help establish and maintain continuous flow, and giving everyone a view of the work along the value stream. It includes a set of techniques that make operation standards visible so that people can follow them more easily. These techniques expose waste so that it can be prevented and eliminated.
LEARNING OBJECTIVES:
1. Understand that visual management is an integral part of Lean transformation
2. Familiarize with the common visual tools such as red tagging, activity boards, A3 storyboards, mistake-proofing, one-point lessons, standard work, kanban, etc.
3. Gain knowledge on how to apply visual tools to add structure and stability to operations, reducing variation and increasing efficiency
CONTENTS:
Introduction
5S - The foundation for a visual workplace
Types of visual management
Visual displays
Visual metrics
Visual controls
Mistake-proofing
Andons
Warning sensors
Common visual tools
Red tagging
Activity board
A3 storyboard
One-point lesson
Standard work chart
Takt time versus actual
Kanban
To download this complete presentation, please visit: http://www.oeconsulting.com.sg
Download the presentation together with train-the-trainer guide and workshop templates at http://wcm.nu
This presentation is made by Oskar Olofsson, WCM Consulting AB
Make changes in the background template if you want to change the appearance
Learn What is Poka Yoke, Elements of Error Proofing, General Inspection, Error Proofing Devices, Ways to Mistake Proofing, Common Sources of Errors, Poka Yoke Principle and much more.
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
The goal of Total Productive Maintenance (TPM) is to increase equipment effectiveness so that each piece of equipment can be operated to its full potential and maintained at that level. To maximize equipment effectiveness, you need a measurement tool that can help you understand your equipment problems so that you can take steps to eliminate them. The key to this understanding is Overall Equipment Effectiveness (OEE).
OEE is a crucial measure in TPM that tells you how well your equipment is running. It links three elements in one percentage: the time the machine is actually running, the quantity of products the machine is turning out, and the quantity of good output.
LEARNING OBJECTIVES
1. Understand the concept and philosophy of TPM and its relationship with OEE
2. Explain the importance of OEE and how it relates to value-adding work of the factory
3. Understand OEE concepts such as Availability, Performance, Quality and the Six Major Losses
4. Describe the steps of collecting and processing OEE data and reporting results
5. Define approaches for reducing equipment-related losses to raise OEE
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
To become a Lean enterprise, office activities must fully support shop-floor manufacturing operations to eliminate waste. The adoption of 5S throughout all office functions is the first step to increase efficiency.
This presentation provides a blueprint for building a Lean foundation for your office. You will learn how to mobilize and align your management team to launch or improve 5S in your office. The presentation covers 5S and Visual Management key concepts, best practices, step-by-step implementation guidance, and how to kick-start 5S in your organization to achieve sustainable world-class excellence.
LEARNING OBJECTIVES:
1. Understand the benefits of working in a clean and neat environment
2. Identify waste in the office
3. Define the 5S principles, and identify visual tools
4. Explain how to apply the 5S principles and visual tools to enhance office organization
5. Learn how to kick start a 5S initiative
6. Define the critical success factors for 5S implementation
CONTENTS:
Introduction & Overview
5S Lays the Foundation for a Lean Enterprise
5S Helps to Eliminate Waste
What is 5S?
Benefits of 5S
5S Principles - Step by Step
How to Conduct a Red Tagging Exercise
Creating a Visual Office
5S Applications
5S Implementation
Starting & Launching a 5S Initiative
5S Audit System & Maturity Levels
5S & Kaizen
Supporting Lean Tools for 5S
Critical Success Factors
To download this complete presentation, please go to: http://www.oeconsulting.com.sg
Hand in hand with 5S implementation is creating Visual Factory. Use of signage, demarcation lines, quality inspection points, easy to ready guages and dials
POKA-YOKE - A Lean Strategy to Mistake ProofingTimothy Wooi
A Lean Strategy in Human Error Prevention aims to detect and correct possible error immediately, eliminating defects at the source.
Poka-Yoke overcome the inefficiencies of inspection through the use of automatic devices that seek,
1.Not to accept a defect for the process
2.Not to Create a Defect
3.Not to Allow a Defect to be passed to the next process
Its purpose is to eliminate product defects by preventing, correcting, or drawing attention to human errors as they occur.
The concept was formalized, and the term adopted, by Shigeo Shingo as part of the
Toyota Production System.
It was originally described as baka-yoke, meaning "fool-proofing“ or “idiot proofing” but the name was later changed to the milder poka-yoke.
These lecture slides were developed by Anna Cox, Sandy Gould and Sarah Wiseman. They form part of human error teaching at UCL which also uses Errordiary exercises.
Please see www.errordiary.org for more info.
Poka-Yoke is concept which stops you from doing mistakes.It is reintroduced by the top consultant of Toyota Production System,he developed it for his workers,so that they can work easily without forgetting any steps to prepare the product.
Mistake proofing, or its Japanese equivalent Poka-yoke (pronounced PO-ka yo-KAY), is the use of any automatic device or process that either makes it infeasible for an error to occur or makes the error immediately obvious once it has occurred.
PFMEA, Risk Reduction and Effectiveness – Advance (AIAG FMEA #4 Edition)
Is your FMEA performing for you?
This is advance level of PFMEA, Have basic understanding fo Core IATF Tools before refering to this presentation.
FMEA is one of the most commonly used safety and quality analysis procedures used in a variety of industries. It is an inductive bottom-up approach that targets the relevant system, design, software, hardware, production, etc failure modes and evaluates their risks based on their levels of severity, expected occurrence, and detectability/preventive measures.
Learn how to analyze, evaluate and manage the risks during development to avoid systematic failures in your system.
Watch this Expert Series webinar to learn more about Failure Mode and Effects Analysis, and about applying a risk management procedure to ensure the functional safety of your products.
https://intland.com/on-demand-webinar/fmea-risk-management-in-practice/
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Failure Mode & Effects Analysis (FMEA) is a step-by-step approach for identifying all possible failures in a design, a manufacturing or assembly process, or a product or service. The purpose of the FMEA is to take actions to eliminate or reduce failures, starting with the highest-priority ones. FMEA also documents current knowledge and actions about the risks of failures, for use in continuous improvement.
In this training presentation, you can teach your employees on the proper steps to construct an FMEA for a design or process, and then implement action plans to eliminate or reduce the risks of potential failures.
LEARNING OBJECTIVES
1. Understand what an FMEA is, why it is used, and when can it be deployed
2. Understand the definitions, scoring system and calculations used in an FMEA
3. Learn the steps to developing an FMEA and the pitfalls to avoid
CONTENTS
1. Introduction to FMEA
2. FMEA: Definitions, Scoring System & Calculations
3. FMEA Procedure
4. FMEA Example
At the end of the year or month what reports would you like to see from your CMMS/EAM? Would you like a few failure reports? Check out this presentation. It may make your day.
Introduction of FMEA; Definition, Activities, important terms, factors, RPN; Process of FMEA; Steps of FMEA
Types of FMEA; FMEA Application; FMEA Related Tools:
Root Cause Analysis, Pareto Chart, Cause Effect Diagram
PPT presented as part of three workshops on "Customer Services Skills for Supervisors" - in Spanish & English, for University of California, San Diego, CA