embedded-systems-for-beginners
•Download as PPTX, PDF•
3 likes•7,266 views
This document provides an overview of embedded systems and microcontrollers. It discusses computing system categories and definitions of embedded systems. Microprocessors like the Intel 4004 and microcontrollers like the Intel 8048 are presented. Characteristics of common microcontroller families like PIC, AVR and MCS-51 are summarized. The document encourages attendees to start their own embedded projects and provides resources for programming microcontrollers.
Report
Share
Report
Share
Recommended
Ppt on embedded systems
The document provides an overview of embedded systems. It defines embedded systems as devices used to control, monitor or assist equipment that contain both computer hardware and software. The document then classifies embedded systems based on performance and functional requirements such as real-time, standalone, networked, mobile, and sophistication. Examples of embedded system applications are given across several industries like automobiles, telecommunications, smart cards, missiles, satellites, and consumer electronics. The document concludes by explaining how embedded systems are implemented using either digital circuits or microprocessor-based systems.
ppt on embedded system
This presentation provides an overview of embedded systems and describes a collision avoidance robot project. It introduces embedded systems and gives examples. It then describes the key components of embedded systems like processors and memory. It discusses the software used for the project. It introduces the collision avoidance robot project, describing its sensors, control unit, actuators and working. It provides code snippets to show how the robot's movement is controlled based on sensor input to avoid collisions.
Report on VLSI
This document provides a summary of Kumar Chandan and Mayank Kumar's summer internship report on RTL design, Verilog, and FPGA programming at Tevatron Technology in Noida, India. It includes an acknowledgements section thanking their mentor and institution for supporting the project. The abstract indicates that the main objective was to study digital circuit behavior and design using Xilinx software. An introduction is provided on topics like VLSI, HDLs, Verilog, modeling styles in Verilog, and system tasks.
Embedded system design process
This document discusses embedded systems and provides information on:
- The components of an embedded system including a processor, peripherals, and software.
- Major application areas such as consumer electronics, automation, and networking.
- The embedded system design process including determining requirements, designing architecture, selecting hardware and software, and testing.
- Recent trends in embedded systems including reduced size, cost and power consumption.
ARM CORTEX M3 PPT
This Presentation describes the ARM CORTEX M3 core processor with the details of the core peripherals. Soon a CORTEX base controller(STM32F100RBT6) ppt will be uploaded. For more information mail me at:gaurav.iitkg@gmail.com.
SYBSC IT SEM IV EMBEDDED SYSTEMS UNIT I Core of Embedded Systems
The document discusses the core components of embedded systems. It states that embedded systems typically contain a central processing core that can be a microprocessor, microcontroller, digital signal processor (DSP), application-specific integrated circuit (ASIC), or programmable logic device. It also discusses other key components like sensors and actuators that interface with the outside world, communication interfaces, embedded firmware, and additional application-specific circuits.
CPLDs
This document discusses complex programmable logic devices (CPLDs). CPLDs contain multiple simpler programmable logic devices (SPLDs) like PALs or GALs on a single chip connected by a programmable interconnect. This allows CPLDs to implement larger logic functions than SPLDs. CPLDs are made up of logic blocks, input/output blocks, and a programmable interconnect that can connect any logic block inputs or outputs. CPLDs generally provide better performance and more predictable timing than FPGAs but have lower density.
Arm architecture chapter2_steve_furber
1. The ARM architecture was first developed by Acorn Computers in 1983 to use the RISC concept. It was based on designs from Berkeley and Stanford and optimized for embedded applications.
2. ARM uses a load-store architecture with 32-bit fixed-length instructions. It has enhanced RISC features like conditional execution and shift-and-ALU operations in a single cycle.
3. The ARM software development tools include a C compiler, assembler, linker, debugger and ARMulator emulator. These allow developing, building, loading and debugging ARM programs on hardware or via emulation.
Recommended
Ppt on embedded systems
The document provides an overview of embedded systems. It defines embedded systems as devices used to control, monitor or assist equipment that contain both computer hardware and software. The document then classifies embedded systems based on performance and functional requirements such as real-time, standalone, networked, mobile, and sophistication. Examples of embedded system applications are given across several industries like automobiles, telecommunications, smart cards, missiles, satellites, and consumer electronics. The document concludes by explaining how embedded systems are implemented using either digital circuits or microprocessor-based systems.
ppt on embedded system
This presentation provides an overview of embedded systems and describes a collision avoidance robot project. It introduces embedded systems and gives examples. It then describes the key components of embedded systems like processors and memory. It discusses the software used for the project. It introduces the collision avoidance robot project, describing its sensors, control unit, actuators and working. It provides code snippets to show how the robot's movement is controlled based on sensor input to avoid collisions.
Report on VLSI
This document provides a summary of Kumar Chandan and Mayank Kumar's summer internship report on RTL design, Verilog, and FPGA programming at Tevatron Technology in Noida, India. It includes an acknowledgements section thanking their mentor and institution for supporting the project. The abstract indicates that the main objective was to study digital circuit behavior and design using Xilinx software. An introduction is provided on topics like VLSI, HDLs, Verilog, modeling styles in Verilog, and system tasks.
Embedded system design process
This document discusses embedded systems and provides information on:
- The components of an embedded system including a processor, peripherals, and software.
- Major application areas such as consumer electronics, automation, and networking.
- The embedded system design process including determining requirements, designing architecture, selecting hardware and software, and testing.
- Recent trends in embedded systems including reduced size, cost and power consumption.
ARM CORTEX M3 PPT
This Presentation describes the ARM CORTEX M3 core processor with the details of the core peripherals. Soon a CORTEX base controller(STM32F100RBT6) ppt will be uploaded. For more information mail me at:gaurav.iitkg@gmail.com.
SYBSC IT SEM IV EMBEDDED SYSTEMS UNIT I Core of Embedded Systems
The document discusses the core components of embedded systems. It states that embedded systems typically contain a central processing core that can be a microprocessor, microcontroller, digital signal processor (DSP), application-specific integrated circuit (ASIC), or programmable logic device. It also discusses other key components like sensors and actuators that interface with the outside world, communication interfaces, embedded firmware, and additional application-specific circuits.
CPLDs
This document discusses complex programmable logic devices (CPLDs). CPLDs contain multiple simpler programmable logic devices (SPLDs) like PALs or GALs on a single chip connected by a programmable interconnect. This allows CPLDs to implement larger logic functions than SPLDs. CPLDs are made up of logic blocks, input/output blocks, and a programmable interconnect that can connect any logic block inputs or outputs. CPLDs generally provide better performance and more predictable timing than FPGAs but have lower density.
Arm architecture chapter2_steve_furber
1. The ARM architecture was first developed by Acorn Computers in 1983 to use the RISC concept. It was based on designs from Berkeley and Stanford and optimized for embedded applications.
2. ARM uses a load-store architecture with 32-bit fixed-length instructions. It has enhanced RISC features like conditional execution and shift-and-ALU operations in a single cycle.
3. The ARM software development tools include a C compiler, assembler, linker, debugger and ARMulator emulator. These allow developing, building, loading and debugging ARM programs on hardware or via emulation.
Embedded system seminar
Embedded systems combine both hardware and software to form an integral part of a larger system or machine. They are designed to perform specific tasks, such as controlling an engine or processing signals in real time, without human intervention. Examples include processors in cars, robots, televisions, and consumer electronics. Embedded systems have a long design life cycle that involves acquiring components, testing and certifying the system, planning logistics and repairs, and potentially upgrading the system over time. Many embedded systems now also connect to the internet, allowing consumer products and industrial equipment to access online services. Common application areas of embedded systems include the military, automotive, medical, telecommunications, consumer, and industrial sectors.
CPLDs
The document discusses different types of field-programmable logic devices (FPLDs) including simple programmable logic devices (SPLDs), complex programmable logic devices (CPLDs), and field programmable gate arrays (FPGAs). It provides an overview of CPLDs, describing their basic architecture and how they expanded on SPLD technology by incorporating multiple SPLDs onto a single chip with programmable interconnect. Examples of vendor CPLD devices like the Xilinx XC9500 series are also mentioned.
System-on-Chip Design, Embedded System Design Challenges
The document discusses challenges in system-on-chip design. The main challenges are:
1. Increasing design productivity by over 100% per technology node to keep up with Moore's Law scaling.
2. Managing power, especially for low-power, wireless, and multimedia applications.
3. Integrating heterogeneous technologies like MEMS and optoelectronics at the system level.
4. Developing test methodologies for system-on-chips, including reusable tests and built-in self-test for analog and digital components.
Training Report on Embedded System
This document is a practical training report submitted by Roshan Mani, a student of Electronics and Communication Engineering at GCET Bikaner, as part of an industrial training completed at CMC Academy in Jaipur. The report provides details about the training, including an overview of CMC Academy and the topics covered during the training such as microprocessors vs microcontrollers, embedded systems, memory addressing types, and the AT89C51 microcontroller. It also describes various electronic components and a bidirectional visitor counter home automation project developed during the training.
programmable logic controller presentation
This document discusses Programmable Logic Controllers (PLCs). It provides a brief history of PLCs, describing how they were introduced in the 1960s as replacements for relay logic and have since evolved with the integration of microprocessors. The key components of a PLC like the power supply, processor, I/O modules, and programming device are defined. Common PLC programming languages including ladder logic are explained and examples are provided. Advantages like reliability and flexibility and disadvantages such as proprietary aspects are reviewed. Finally, common industrial applications and leading PLC brands are listed.
embedded systems ppt 3
This document provides an overview of embedded systems, including what they are, where they are commonly found, and the key components and differences between microprocessors and microcontrollers. Embedded systems combine hardware and software to perform a dedicated function, and are found in many everyday devices like home appliances, vehicles, phones, and medical equipment. They contain microprocessors or microcontrollers that act as the central computing element. Microcontrollers are typically lower cost and contain CPU, memory and I/O on a single chip, making them well-suited for embedded applications where size, cost and power are constraints.
Power dissipation cmos
This document discusses power dissipation in CMOS circuits. It identifies the main sources of power dissipation as dynamic, static, and short circuit power. Dynamic power is caused by charging and discharging capacitors during switching and depends on activity factors, voltage, and frequency. Static power includes leakage currents that occur even when the device is inactive. Short circuit power arises when both NMOS and PMOS are on simultaneously during signal transitions. The document provides techniques for reducing each type of power dissipation such as lowering voltage, reducing switching activity, minimizing capacitance and transistor sizing.
Fpga Knowledge
The document discusses FPGA architecture and programming technologies. It provides an overview of FPGA components like logic blocks and interconnect frameworks. It compares SRAM, anti-fuse, EPROM and EEPROM programming technologies in FPGAs and how each is configured and reprogrammed. Commercially available FPGAs from Xilinx and CPLDs from Altera are described as examples.
Embedded System Basics
It is a presentation for the Embedded System Basics. It will be very useful for the engineering students who need to know the basics of Embedded System.
Industrial automation by PLC and SCADA
hello friends-this is hansraj
This ppt provide you a better understanding on industrial automation by using plc and scada.Here i included all leading companies that in area of plc and scada manufacturing.
To reduce human effort,enhance accuracy,increase productivity automation is required.
Plc ppt
The document provides information about Programmable Logic Controllers (PLCs) including:
(1) An overview of PLCs, their history and components. PLCs were developed to replace relays and are used to automate industrial processes.
(2) Details on how PLCs work, including their main components like the CPU, power supply, and input/output modules. Programs are written and stored in memory to control inputs and outputs.
(3) Examples of ladder logic programming including basic logic elements, timers, counters, and latching circuits. Ladder diagrams provide a visual way to program sequences of operations and control flows.
SOC Processors Used in SOC
The document discusses the PowerPC processor. It provides details about the IBM 405Fx PowerPC processor core such as its 32-bit RISC design, 5-stage pipeline, separate instruction and data caches, virtual memory management unit, timers, and debug support. The PowerPC architecture consists of the user instruction set architecture, virtual environment architecture, and operating environment architecture. The processor core contains the pipeline, cache units, MMU, timers, and interfaces to other functions.
FPGA
This document discusses field programmable gate arrays (FPGAs). It begins by describing FPGA basics and architecture, including configurable logic blocks (CLBs), I/O blocks, and switch matrices. It then discusses FPGA advantages such as low cost, fast prototyping, and reusability. The document also covers FPGA process technologies including SRAM, antifuse, and EPROM/EEPROM/Flash. It provides details on FPGA architectures, logic elements, routing, memory blocks, and examples of Xilinx FPGAs.
Plc and scada
This document discusses programmable logic controllers (PLCs) and supervisory control and data acquisition (SCADA) systems used in industrial automation. It defines automation and describes how PLCs and SCADA systems are commonly used to automate industrial processes. The document outlines the basic components and programming of PLCs, provides examples of PLC brands and types, and describes some common applications of PLCs and SCADA systems in industries like manufacturing, food and beverage, and water treatment.
Embedded systems
Embedded systems are computer systems designed for a specific function within a larger mechanical or electrical system. They are typically based on microcontrollers for low power consumption and fixed time constraints. Embedded systems are designed to perform specific tasks, have real-time operation, limited size and cost, and prioritize reliability and safety over flexibility. Common examples include digital watches, traffic lights, MP3 players, appliances, phones, engine controllers, medical devices, and defense technologies. Key components are processors and memory, while programming is typically done in languages like C/C++ using compilers and simulators.
Embedded system
This document provides an overview of embedded systems and their processors. It defines an embedded system as having computer hardware and software embedded as important components. Processors are the heart of embedded systems and can be microprocessors or microcontrollers. Components include hardware, memories, ports and application software. Languages for programming embedded systems include C and C++. Embedded systems are classified based on scale, connectivity and mobility. They have constraints like limited memory and need for low power. Common applications include household appliances, audio players, vehicle controllers and medical equipment.
Low power vlsi design ppt
Low power VLSI design has become an important discipline due to increasing device densities, operating frequencies, and proliferation of portable electronics. Power dissipation, which was previously neglected, is now a primary design constraint. There are several sources of power dissipation in CMOS circuits, including switching power due to charging and discharging capacitances, short-circuit power during signal transitions, and leakage power from subthreshold and gate leakage currents. Designers have some control over power consumption by optimizing factors such as activity levels, clock frequency, supply voltage, transistor sizing and architecture.
4.FPGA for dummies: Design Flow
The document discusses FPGA design flow and programming. It describes the roles of the systems architect who defines high-level requirements and provides a golden model and test vectors. The FPGA designer is responsible for delivering a firmware that approximates the golden model on a hardware platform using vendor tools. The design flow includes simulation, synthesis, placement and routing, and testing at different stages to verify functionality and timing.
Embedded system design process_models
The document discusses different models for describing the behavior of embedded systems, including sequential program models, state machine models, and finite state machine with datapath (FSMD) models. It uses an example of a simple elevator controller to illustrate how each model can be applied. The state machine and FSMD models are presented as alternatives to the sequential program model that may provide a more natural description of systems whose behavior involves reacting to inputs by transitioning between states.
INDUSTRIAL AUTOMATION USING PLC
The use of Computerized or robotic devices to complete manufacturing tasks.
Check on youtube https://www.youtube.com/watch?v=xWDtQ3wEDrQ
Proteus Concepts
Overview of Proteus product capabilities providing complete cost-schedule-risk-financial integration, analysis and management in complex project management environments.
Proteus Circuit Simulation
This document summarizes a circuit simulation workshop organized by the IEEE HIET Student Branch and the Department of Electronic Engineering at Hamdard Institute of Engineering and Technology. The workshop instructor was Engr. Abdul Haseeb and covered an introduction to Proteus ISIS software for circuit simulation. Key topics included placing components, editing properties, running simulations, and examples like a fuse, flip-flop, power supply ripple analysis, and amplifier. The document thanked various organizers and participants for their support of the event.
More Related Content
What's hot
Embedded system seminar
Embedded systems combine both hardware and software to form an integral part of a larger system or machine. They are designed to perform specific tasks, such as controlling an engine or processing signals in real time, without human intervention. Examples include processors in cars, robots, televisions, and consumer electronics. Embedded systems have a long design life cycle that involves acquiring components, testing and certifying the system, planning logistics and repairs, and potentially upgrading the system over time. Many embedded systems now also connect to the internet, allowing consumer products and industrial equipment to access online services. Common application areas of embedded systems include the military, automotive, medical, telecommunications, consumer, and industrial sectors.
CPLDs
The document discusses different types of field-programmable logic devices (FPLDs) including simple programmable logic devices (SPLDs), complex programmable logic devices (CPLDs), and field programmable gate arrays (FPGAs). It provides an overview of CPLDs, describing their basic architecture and how they expanded on SPLD technology by incorporating multiple SPLDs onto a single chip with programmable interconnect. Examples of vendor CPLD devices like the Xilinx XC9500 series are also mentioned.
System-on-Chip Design, Embedded System Design Challenges
The document discusses challenges in system-on-chip design. The main challenges are:
1. Increasing design productivity by over 100% per technology node to keep up with Moore's Law scaling.
2. Managing power, especially for low-power, wireless, and multimedia applications.
3. Integrating heterogeneous technologies like MEMS and optoelectronics at the system level.
4. Developing test methodologies for system-on-chips, including reusable tests and built-in self-test for analog and digital components.
Training Report on Embedded System
This document is a practical training report submitted by Roshan Mani, a student of Electronics and Communication Engineering at GCET Bikaner, as part of an industrial training completed at CMC Academy in Jaipur. The report provides details about the training, including an overview of CMC Academy and the topics covered during the training such as microprocessors vs microcontrollers, embedded systems, memory addressing types, and the AT89C51 microcontroller. It also describes various electronic components and a bidirectional visitor counter home automation project developed during the training.
programmable logic controller presentation
This document discusses Programmable Logic Controllers (PLCs). It provides a brief history of PLCs, describing how they were introduced in the 1960s as replacements for relay logic and have since evolved with the integration of microprocessors. The key components of a PLC like the power supply, processor, I/O modules, and programming device are defined. Common PLC programming languages including ladder logic are explained and examples are provided. Advantages like reliability and flexibility and disadvantages such as proprietary aspects are reviewed. Finally, common industrial applications and leading PLC brands are listed.
embedded systems ppt 3
This document provides an overview of embedded systems, including what they are, where they are commonly found, and the key components and differences between microprocessors and microcontrollers. Embedded systems combine hardware and software to perform a dedicated function, and are found in many everyday devices like home appliances, vehicles, phones, and medical equipment. They contain microprocessors or microcontrollers that act as the central computing element. Microcontrollers are typically lower cost and contain CPU, memory and I/O on a single chip, making them well-suited for embedded applications where size, cost and power are constraints.
Power dissipation cmos
This document discusses power dissipation in CMOS circuits. It identifies the main sources of power dissipation as dynamic, static, and short circuit power. Dynamic power is caused by charging and discharging capacitors during switching and depends on activity factors, voltage, and frequency. Static power includes leakage currents that occur even when the device is inactive. Short circuit power arises when both NMOS and PMOS are on simultaneously during signal transitions. The document provides techniques for reducing each type of power dissipation such as lowering voltage, reducing switching activity, minimizing capacitance and transistor sizing.
Fpga Knowledge
The document discusses FPGA architecture and programming technologies. It provides an overview of FPGA components like logic blocks and interconnect frameworks. It compares SRAM, anti-fuse, EPROM and EEPROM programming technologies in FPGAs and how each is configured and reprogrammed. Commercially available FPGAs from Xilinx and CPLDs from Altera are described as examples.
Embedded System Basics
It is a presentation for the Embedded System Basics. It will be very useful for the engineering students who need to know the basics of Embedded System.
Industrial automation by PLC and SCADA
hello friends-this is hansraj
This ppt provide you a better understanding on industrial automation by using plc and scada.Here i included all leading companies that in area of plc and scada manufacturing.
To reduce human effort,enhance accuracy,increase productivity automation is required.
Plc ppt
The document provides information about Programmable Logic Controllers (PLCs) including:
(1) An overview of PLCs, their history and components. PLCs were developed to replace relays and are used to automate industrial processes.
(2) Details on how PLCs work, including their main components like the CPU, power supply, and input/output modules. Programs are written and stored in memory to control inputs and outputs.
(3) Examples of ladder logic programming including basic logic elements, timers, counters, and latching circuits. Ladder diagrams provide a visual way to program sequences of operations and control flows.
SOC Processors Used in SOC
The document discusses the PowerPC processor. It provides details about the IBM 405Fx PowerPC processor core such as its 32-bit RISC design, 5-stage pipeline, separate instruction and data caches, virtual memory management unit, timers, and debug support. The PowerPC architecture consists of the user instruction set architecture, virtual environment architecture, and operating environment architecture. The processor core contains the pipeline, cache units, MMU, timers, and interfaces to other functions.
FPGA
This document discusses field programmable gate arrays (FPGAs). It begins by describing FPGA basics and architecture, including configurable logic blocks (CLBs), I/O blocks, and switch matrices. It then discusses FPGA advantages such as low cost, fast prototyping, and reusability. The document also covers FPGA process technologies including SRAM, antifuse, and EPROM/EEPROM/Flash. It provides details on FPGA architectures, logic elements, routing, memory blocks, and examples of Xilinx FPGAs.
Plc and scada
This document discusses programmable logic controllers (PLCs) and supervisory control and data acquisition (SCADA) systems used in industrial automation. It defines automation and describes how PLCs and SCADA systems are commonly used to automate industrial processes. The document outlines the basic components and programming of PLCs, provides examples of PLC brands and types, and describes some common applications of PLCs and SCADA systems in industries like manufacturing, food and beverage, and water treatment.
Embedded systems
Embedded systems are computer systems designed for a specific function within a larger mechanical or electrical system. They are typically based on microcontrollers for low power consumption and fixed time constraints. Embedded systems are designed to perform specific tasks, have real-time operation, limited size and cost, and prioritize reliability and safety over flexibility. Common examples include digital watches, traffic lights, MP3 players, appliances, phones, engine controllers, medical devices, and defense technologies. Key components are processors and memory, while programming is typically done in languages like C/C++ using compilers and simulators.
Embedded system
This document provides an overview of embedded systems and their processors. It defines an embedded system as having computer hardware and software embedded as important components. Processors are the heart of embedded systems and can be microprocessors or microcontrollers. Components include hardware, memories, ports and application software. Languages for programming embedded systems include C and C++. Embedded systems are classified based on scale, connectivity and mobility. They have constraints like limited memory and need for low power. Common applications include household appliances, audio players, vehicle controllers and medical equipment.
Low power vlsi design ppt
Low power VLSI design has become an important discipline due to increasing device densities, operating frequencies, and proliferation of portable electronics. Power dissipation, which was previously neglected, is now a primary design constraint. There are several sources of power dissipation in CMOS circuits, including switching power due to charging and discharging capacitances, short-circuit power during signal transitions, and leakage power from subthreshold and gate leakage currents. Designers have some control over power consumption by optimizing factors such as activity levels, clock frequency, supply voltage, transistor sizing and architecture.
4.FPGA for dummies: Design Flow
The document discusses FPGA design flow and programming. It describes the roles of the systems architect who defines high-level requirements and provides a golden model and test vectors. The FPGA designer is responsible for delivering a firmware that approximates the golden model on a hardware platform using vendor tools. The design flow includes simulation, synthesis, placement and routing, and testing at different stages to verify functionality and timing.
Embedded system design process_models
The document discusses different models for describing the behavior of embedded systems, including sequential program models, state machine models, and finite state machine with datapath (FSMD) models. It uses an example of a simple elevator controller to illustrate how each model can be applied. The state machine and FSMD models are presented as alternatives to the sequential program model that may provide a more natural description of systems whose behavior involves reacting to inputs by transitioning between states.
INDUSTRIAL AUTOMATION USING PLC
The use of Computerized or robotic devices to complete manufacturing tasks.
Check on youtube https://www.youtube.com/watch?v=xWDtQ3wEDrQ
What's hot (20)
System-on-Chip Design, Embedded System Design Challenges
System-on-Chip Design, Embedded System Design Challenges
Viewers also liked
Proteus Concepts
Overview of Proteus product capabilities providing complete cost-schedule-risk-financial integration, analysis and management in complex project management environments.
Proteus Circuit Simulation
This document summarizes a circuit simulation workshop organized by the IEEE HIET Student Branch and the Department of Electronic Engineering at Hamdard Institute of Engineering and Technology. The workshop instructor was Engr. Abdul Haseeb and covered an introduction to Proteus ISIS software for circuit simulation. Key topics included placing components, editing properties, running simulations, and examples like a fuse, flip-flop, power supply ripple analysis, and amplifier. The document thanked various organizers and participants for their support of the event.
Proteus CMMS Overview
Proteus is an enterprise asset management software suite with modules for preventive maintenance, demand maintenance, work orders, scheduling, inventory, purchasing, and more. It offers features like multi-cycle scheduling, runtime scheduling, customizable reports, and optional interfaces. The document provides overviews of the main modules and functions of the Proteus software.
Introduction to proteus
Introduction to Proteus Interface
----------------------------------------------
Presented in EEE'10 class (CUET) under Electrical Service Design Sessional Course in 2013.
-----------------------------------------------
Happy Learning :)
PROTEUS H2020
PROTEUS is an EU-funded research project that aims to develop an open-source big data solution for real-time predictive analytics and interactive visualization. It will provide a hybrid processing engine for both batch and streaming data, a library called SOLMA for scalable online machine learning, and tools for real-time interactive visual analytics. The system will be validated using a use case from ArcelorMittal on analyzing sensor data from a hot strip mill.
Proteus all in-onemanualv6.31
This document provides an overview and user manual for Intelligent Schematic (ISIS), a CAD tool for electronic schematic capture, simulation, and PCB design. Key features highlighted include hierarchical design, automatic annotation, ASCII data import, sheet global net properties, and integration with the PROTEUS VSM circuit simulator and ARES PCB layout software. The document contains chapters on general concepts, object specifics, libraries, multi-sheet designs, netlist generation, report generation, and using ISIS with ARES.
Proteus
This document contains summaries and explanations of references made throughout James Joyce's novel Ulysses. It analyzes quotes and allusions to philosophers, theologians, poets, historical figures and events, locations in Dublin, and more. Some of the key references explained include William Blake, Oscar Wilde, Jonathan Swift, Aristotle, the Spanish Armada, and various figures involved in Irish independence movements.
An introdution to MPLAB
The document provides an overview of an introduction to the MPLAB integrated development environment presented by Microchip Technology. The summary covers:
1) The presentation will explain what MPLAB IDE is used for and walk through a simple project to demonstrate how it eases the embedded design cycle.
2) It will select a device, create a project, select language tools, add files to the project, create code, build the project, and test the code with a simulator.
3) This allows users to get familiar with the basic components of MPLAB and demonstrates how to assemble a project framework, build an application, and test it in the simulator.
Proteus mahadi ppt
Proteus are Gram-negative, motile bacilli that are commonly found in the environment and intestines. The two main species are P. mirabilis and P. vulgaris. They are characterized by swarming growth on agar plates and being positive for urease, motility, and H2S production. Proteus can cause opportunistic infections like UTIs and wound infections. Identification involves culture, biochemical tests, and Dienes phenomenon for differentiation of species. Antibiotics effective against Proteus include cephalosporins and aminoglycosides.
Proteus isis -manual pt
Este documento fornece instruções passo a passo para operar um software de projeto de circuitos impressos. Ele explica como criar o contorno da placa, colocar componentes, marcar ligações e rotear automaticamente o projeto. O documento também discute como criar novos componentes, adicionar texto e salvar o trabalho.
Lab 1 microcontroller
This laboratory instruction sheet provides information on experiment 1, which introduces students to MPLAB, Proteus, and MicroC software. The objectives are for students to understand the basic operation and use of MPLAB, MicroC, and Proteus, use MPLAB and MicroC to write programs for PIC microcontrollers in assembly language and C, and use MPLAB SIM and Proteus to simulate programs. The procedures describe how to write and simulate a simple assembly language program using MPLAB that toggles an LED, and how to simulate the hex file of the program using Proteus.
Introduction to MPLAB IDE
A starter guide how to use Microchip MPLAB IDE for PIC microcontrollers and related tools like MPLAB C18, C30 and C32 compilers, and how to MPLAB features to get connected and integrated with programmer/debugger devices and development kits from Microchip.
for more discussion and articles about different microcontroller platforms and tutorials please visit: http://elrayescampaign.blogspot.ca/
Von Neumann vs Harvard Architecture
The Von Neumann and Harvard architectures are two common computer architectures. The Von Neumann architecture uses a single memory to store both programs and data, accessed via a shared bus, while the Harvard architecture separates memory and uses two separate buses for program and data access. The Von Neumann architecture has advantages of simpler design and lower cost while the Harvard allows parallel instruction and data processing but has higher development costs. They differ primarily in their memory structure and bus configurations.
RISC Vs CISC, Harvard v/s Van Neumann
This document discusses RISC vs CISC architectures and the Harvard and von Neumann computer architectures. It provides examples of multiplying two numbers in memory using CISC and RISC approaches. CISC uses complex instructions that perform multiple operations, while RISC breaks operations into simpler instructions. Harvard architecture separates program and data memory while von Neumann uses shared memory.
Embedded c
Embedded C is a subset of standard C used for programming embedded systems. It uses a cross compiler to convert source code into machine-level instructions for the target processor. Key aspects of Embedded C include data types, storage classes, arithmetic and logical operations, relational operations, and conditional branching instructions like if-else statements to direct program flow.
Embedded C
The document provides an introduction to the C programming language and algorithms. It begins with an overview of C and its history. It then defines key concepts like keywords, data types, qualifiers, loops, storage classes, decision statements, and jumps. Examples of algorithms are provided for common problems like adding two numbers. Pattern printing algorithms are given as homework exercises. The document discusses where C is used and explains what a programming language and algorithms are. It emphasizes the importance of understanding requirements before implementation.
Proteus spp (2)
Proteus spp. are gram-negative, facultatively anaerobic, motile bacilli commonly found in the human intestinal tract. The two main species of medical importance are P. mirabilis and P. vulgaris. They can cause various infections opportunistically. Diagnostic tests include gram stain showing gram-negative rods, growth on blood agar showing swarming motility, and positive reactions in the TSI test and oxidase test. Identification of species involves examining reactions in IMViC tests and analyzing biochemical profiles using systems like API or Vitek.
Embedded System Presentation
This document discusses embedded systems. It defines an embedded system as a microprocessor-based system designed to perform dedicated functions. Embedded systems are found in devices ranging from household appliances to spacecraft. The document discusses the history of embedded systems and how they have evolved from using microprocessors to typically using microcontrollers. It also discusses the hardware and software components of embedded systems as well as common programming languages. Examples of different types of embedded systems are provided.
Proteus
Este documento describe las características de tres géneros bacterianos: Proteus, Morganella y Yersinia. Proporciona información sobre su epidemiología, morfología, metabolismo, factores de virulencia, enfermedades causadas e identificación. También detalla el tratamiento y prevención de infecciones por estas bacterias, particularmente Proteus y Morganella que causan infecciones nosocomiales, e Yersinia pestis que causa la peste bubónica y neumónica.
Automatic control of street light using LDR
Many of the people have a phobia of darkness, so to assist them in such situation, we have explained a simple circuit. It will automatically turn on street light in the way of LEDs or bulb coupled with relay. Working this circuit is very much easy and also the power consumed by the circuit is very low because of the very few components used in the circuit.
Viewers also liked (20)
Similar to embedded-systems-for-beginners
Embedded systems-for-beginners-electro8
We Offering Embedded Base Automation ,Power electronics ,Bio medical Products in India,As well as We providing International, University ,Projects Guidance for Engineering Students,
Services we Offer
Industries
Colleges
Security System
Sistem mikroprosessor
Here are the key components of a motherboard:
- CPU - The central processing unit, usually located in a CPU socket. Processes instructions and performs calculations.
- RAM slots - Slots to insert RAM modules to provide short-term storage for programs and data being actively worked on.
- Expansion slots - Slots that accept add-on cards like graphics cards, sound cards, network cards, etc. Common types include PCI, PCIe, AGP.
- BIOS chip - Basic Input/Output System firmware that controls bootup and provides an interface to hardware.
- Chipset - Integrated circuits that connect the CPU and RAM to peripherals and expansion slots. Northbridge and southbridge
EE6602 Embedded System
The document discusses the objectives and syllabus of an embedded systems course. It aims to introduce students to the building blocks of embedded systems including processors, memory, I/O devices and software. The syllabus covers topics like embedded networking protocols, embedded development environments, real-time operating systems and embedded applications. Example applications discussed include washing machines, automotive systems and smart cards.
Introduction to AVR Microcontroller
This document provides an introduction to AVR microcontrollers. It discusses the history of microcontrollers beginning in 1971 and components like CPU, ROM, RAM and I/O. AVR microcontrollers were introduced in 1996 and range from 1 to 256KB with 8 to 100 pins. They are cheaper and slower than microprocessors but are useful for specialized applications. The document outlines the AVR architecture and family as well as development tools and support for AVR microcontrollers.
PILOT Session for Embedded Systems
PILOT Session for Embedded Systems Course, include intro, motor control, PWM then applications as Fan control, HHO Project.
Module 1.pdf
This document provides an introduction to a course on microcontrollers using the 8051 microcontroller. It outlines the course outcomes, which include explaining the differences between microprocessors and microcontrollers, writing programs using 8051 assembly instructions, interfacing with I/O ports, timers, serial ports and interrupts. It describes the topics that will be covered in each module, including 8051 architecture, instruction set, stack, timers, serial communication and interrupts. Recommended textbooks are also provided.
Micro controller & Micro processor
This document outlines the course for a Microprocessor and Microcontroller class. It includes the objectives, which are to provide an overview of microcontroller architecture, addressing modes, instruction sets, subroutines, interrupts, and software/hardware interfacing. The course outline then details the various topics that will be covered, such as internal architecture of microprocessors and microcontrollers, instruction sets, addressing modes, interrupts and timers. It lists exam dates and required textbooks.
Microcontroller from basic_to_advanced
The document discusses various topics related to embedded systems and microcontrollers including:
- Architectures like Von Neumann, Harvard and modified Harvard
- Types of microcontrollers like 8-bit, 16-bit and 32-bit
- Programming languages and IDEs used for embedded programming
- Common development boards and microcontrollers
- Memory types, buses, I/O and basic operation of microcontrollers
- Interfacing sensors and actuators to microcontrollers
Summer training embedded system and its scope
CETPA INFOTECH PVT LTD is one of the IT education and training service provider brands of India that is preferably working in 3 most important domains. It includes IT Training services, software and embedded product development and consulting services.
Summer training embedded system and its scope
CETPA INFOTECH PVT LTD is one of the IT education and training service provider brands of India that is preferably working in 3 most important domains. It includes IT Training services, software and embedded product development and consulting services.
http://www.cetpainfotech.com
Challenges in Embedded Computing
This document discusses embedded computing and microcontrollers. It provides information on characteristics of embedded systems like meeting deadlines and real-time constraints. It explains why microprocessors are useful for implementing digital systems efficiently. Microprocessors can be customized for different price points and markets. The document also discusses challenges in embedded computing like power consumption and testing. It provides specifications of computer components like the processor, memory, and ports. Finally, it describes several families of microcontrollers like the Intel 4004, 8051, and ARM profiles.
Microprocessor
The document discusses microprocessors and microcontrollers. It defines a microprocessor as the central processing unit (CPU) of a microcomputer that is contained on a single silicon chip. A microcontroller is similarly integrated but also includes memory and input/output ports, making it self-contained to control a specific system. The document provides details on the components and architecture of microprocessors, including registers, buses, memory, and I/O devices. It also summarizes the characteristics of the Intel 8085 microprocessor.
Practical reverse engineering and exploit development for AVR-based Embedded ...
The document outlines an agenda for a training on practical firmware reversing and exploit development for AVR-based embedded devices. The training will cover: (1) an introduction to the AVR architecture through an example; (2) pre-exploitation techniques; (3) exploitation and building return-oriented programming (ROP) chains; and (4) post-exploitation tricks. It provides background information on the AVR architecture, which is used widely in embedded and IoT devices, and discusses features like memory organization, registers, interrupts, and assembly instructions. Development tools for AVR like Atmel Studio, AVR-GCC, and debuggers are also briefly mentioned.
Embedded system design using arduino
The slide provides the comparative analysis of 8086, 8051 and other microprocessors, and why Arduino for embedded system design.
ankit
This document provides an overview of embedded systems and microcontrollers. It discusses the history and components of microcontrollers, advantages over microprocessors, and major market players like Texas Instruments and Atmel. The document focuses on the AVR microcontroller, describing its history, features, family and architecture. It also introduces PIC and ARM microcontrollers and describes a mini project to build a haptic robotic arm using an Atmel microcontroller.
chapter 2 IE.pptx
The document discusses programmable logic controllers (PLCs), including their architecture, types, modules, configuration, scan cycle, capabilities, and selection criteria. It describes the main components of a PLC, including input and output modules, a central processing unit, memory, power supply, and programming devices. The three main types of PLC architectures are fixed, modular, and distributed PLCs, which vary in size, flexibility, customization, and suitable applications.
SYBSC IT SEM IV EMBEDDED SYSTEMS UNIT IV Designing Embedded System with 8051...
The document discusses various factors to consider when selecting a microcontroller, including speed, features, power consumption, memory, I/O pins, cost, and development support. It then describes specifics of the 8051 microcontroller such as its architecture, variants, and applications. The 8051 has powerful boolean processing, interrupts, timers, serial interface, and low power consumption. The document outlines the 8051's memory organization including program memory, internal data memory, external data memory, and SFR memory. It also discusses the build process for embedded systems including compiling, linking, and locating to produce the final executable hex code.
Embedded systems basics
The document provides an overview of embedded systems basics. It defines an embedded system as a computer system with built-in hardware and software that performs a dedicated function within a larger mechanical or electrical system. Embedded systems are designed to respond to particular inputs, perform pre-programmed functions, and control physical devices. They are found in devices such as appliances, vehicles, industrial equipment, medical devices, and more. The document outlines the characteristics, components, and applications of embedded systems.
Introduction of microcontroller
This lecture contain some important and basic things of a microcontrollers. fro more detail visit this post of our website
http://engineermaze.com/introduction-of-microcontroller-51
Embedded training report(mcs 51)
The document is a report submitted by Gurwinder Singh from the Radiant Institute of Engineering and Technology about their six-week industrial training at Beri Institute of Technology. It thanks God and the staff at BIT for supporting and sharing their experience. It expresses gratitude to the training and placement cell at the home institute.
Similar to embedded-systems-for-beginners (20)
Practical reverse engineering and exploit development for AVR-based Embedded ...
Practical reverse engineering and exploit development for AVR-based Embedded ...
SYBSC IT SEM IV EMBEDDED SYSTEMS UNIT IV Designing Embedded System with 8051...
SYBSC IT SEM IV EMBEDDED SYSTEMS UNIT IV Designing Embedded System with 8051...
Recently uploaded
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Constructing Your Course Container for Effective Communication
Communicating effectively and consistently with students can help them feel at ease during their learning experience and provide the instructor with a communication trail to track the course's progress. This workshop will take you through constructing an engaging course container to facilitate effective communication.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-mule-event-processing-models/
Agenda
● What is event processing in MuleSoft?
● Types of event processing models in Mule 4
● Distinction between the reactive, parallel, blocking & non-blocking processing
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shivani Yasaswi - https://www.linkedin.com/in/shivaniyasaswi/
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneBeyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Solutons Maths Escape Room Spatial .pptx
Solutions of Puzzles of Mathematics Escape Room Game in Spatial.io
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Recently uploaded (20)
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
B. Ed Syllabus for babasaheb ambedkar education university.pdf
B. Ed Syllabus for babasaheb ambedkar education university.pdf
Constructing Your Course Container for Effective Communication
Constructing Your Course Container for Effective Communication
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
embedded-systems-for-beginners
- 2. • Relax, don't try to take any notes, ...just write your questions... • Slides • Twitter – http://twitter.com/migaber • Email – migabora@gmail.com • Feel free to email me, download these slides, and share your thoughts with me.
- 3. • Session objectives • Computing systems overview • Embedded Systems!! .. What does it mean ?? • Microprocessors and Microcontrollers • Micro-controllers and it's applications • How to start your Graduation ‘embedded project’
- 5. Computing systems overview
- 9. Embedded systems.., what does it mean ?!
- 10. • In Arabic ( ). • A control system designed using a micro- computer to perform a specific tasks. • Consists of Mechanical parts in addition to electrical.
- 16. Microprocessors and Microcontrollers
- 17. • In 1971 Intel 4004 microprocessor released • and Intel 8008 in 1973 http://en.wikipedia.org/wiki/Microprocessor
- 19. • In 1977 Intel made the Myth … Intel 8048 • MCS-48 family • They combined RAM and ROM on the same chip
- 20. • PROM - Programmable ROM • EPROM - Erasable PROM • EEPROM - Electrical EPROM • Flash memory
- 21. • 8-bit ALU, Accumulator and 8-bit Registers • 8-bit data bus – It can access 8 bits of data in one operation • 16-bit address bus – It can access 216 memory locations – 64 KB (65536 locations) each of RAM and ROM • On-chip RAM – 128 bytes (data memory) • On-chip ROM – 4 kByte (program memory) • Four byte bi-directional input/output port • UART (serial port) • Two 16-bit Counter/timers • Two-level interrupt priority • Power saving mode (on some derivatives) http://en.wikipedia.org/wiki/Intel_MCS-51
- 22. • Small instruction set to learn • Built in oscillator with selectable speeds • Easy entry level, in circuit programming plus in circuit debugging units • Inexpensive microcontrollers • Wide range of interfaces including I²C, SPI, USB, USART, A/D, programmable comparators, PWM, LIN, CAN, PSP, and Ethernet http://en.wikipedia.org/wiki/PIC_microcontroller
- 24. • USB controller support • LCD controller support • Low-voltage devices operating down to 1.8 V • Watchdog timer (WDT) • 8-bit and 16-bit timers • Analog comparator • 10 or 12-bit A/D converters, with multiplex of up to 16 channels • 12-bit D/A converters http://en.wikipedia.org/wiki/Atmel_AVR
- 25. • Microprocessor • Microcontroller – CPU is stand-alone, – CPU, RAM, ROM, I/O and RAM, ROM, I/O, timer timer are all on a single are separated chip – designer can decide on – fix amount of on-chip the amount of ROM, ROM, RAM, I/O ports RAM and I/O ports. – single-purpose – general-purpose – Ex. 8051, PIC mc, Atmel, – Ex. 8085,8086 mp, Phillips Motorola 6800, Intel’s 8086
- 26. What do you think ?? Robotics automation security remote-sensing audio-mixers and moooooooooooooooooooooooreeeeeeee
- 27. • You need little hardware knowledge with your software. • Select the family and chip according to your application. • Learn how to program your device using its datasheet • Start to use its IDE and development tools and join the embedded world .
- 28. • PIC has its IDE (called MPLAP) used to write your code and debug it and to generate your .HEX file • Download it from here http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=81 • Use the .Hex file to simulate your project, Proteus 7 is the best for this case • Every thing goes in the right way ?? Burn the code to your chip and enjoy your project, you will need a programmer in this step
- 32. • Slides • Twitter – http://twitter.com/migaber • Email – migabora@gmail.com