This document discusses lightning and surge protection for equipment in business premises and homes. It summarizes that while external lightning protection systems can help, surges can still enter buildings and damage electronics through power, phone, or TV lines. It then provides an overview of surge protection kits that can protect equipment connected to these lines from damage. Recommendations are also made for installing a complete external lightning protection system.
ESP D1 Series - Enhanced mains power protectorsFurse
Following in the footsteps of our market-leading M1 Series of mains power surge protectors, the new D1 Series now offers industry leading low let-through voltage combined with the convenience of mounting to a
standard 35mm DIN rail.
With a choice of LED or innovative LCD display, and opportunity for remote mounting, D1 protectors establish a new benchmark for professional surge protection devices within the electrical marketplace.
JMV’s highly efficient Data line Surge Protection Device are designed to widely used in server equipments, router, working stations (intranet) HUB and board band.
Source(s): http://www.jmv.co.in/surge-protection/
ESP D1 Series - Enhanced mains power protectorsFurse
Following in the footsteps of our market-leading M1 Series of mains power surge protectors, the new D1 Series now offers industry leading low let-through voltage combined with the convenience of mounting to a
standard 35mm DIN rail.
With a choice of LED or innovative LCD display, and opportunity for remote mounting, D1 protectors establish a new benchmark for professional surge protection devices within the electrical marketplace.
JMV’s highly efficient Data line Surge Protection Device are designed to widely used in server equipments, router, working stations (intranet) HUB and board band.
Source(s): http://www.jmv.co.in/surge-protection/
On-Chip ESD Protection Achieving 8kV HBM Without Compromising the 3.4Gbps HDM...Sofics
To maintain signal integrity on HDMI TMDS interfaces ESD protection requires careful design. Moreover, due to direct consumer interaction higher ESD specifications are requested. This paper presents results for an HDMI circuit achieving 8kV HBM without compromising the 3.4Gbps data rate through the use of low capacitive on‐chip ESD clamps.
Pepperl + Fuchs' Emerson Global User Exchange highlights!Kristen_Barbour_PF
Check out the highlights from the Pepperl+Fuchs booth during the 2011 Emerson Global Users Exchange held at the Gaylord Opryland Resort & Convention Center.
#EMRex and @PepperlFuchsUSA
The purpose of this IEEE 1692 Abstract is to familiarize the reader with the faults that are accountable for most of the
unexplained lightning related damage, and explain the advantages of blocking technologies that can effectively isolate
and protect communications and other equipment.
Optimized Local I/O ESD Protection for SerDes In Advanced SOI, BiCMOS and Fin...Sofics
Sofics presentation (B2.2) at the 1st International EOS/ESD Symposium on Design and System (IEDS). IEDS is dedicated to the fundamental understanding of issues related to electrostatic discharge on design and system and the application of this knowledge to the solution of problems.
Semiconductor companies are developing ever faster interfaces to satisfy the need for higher data throughputs. However, the parasitic capacitance of the traditional ESD solutions limits the signal frequency. This paper demonstrates low-cap Analog I/Os for high speed SerDes (28Gbps to 112Gbps) circuits created in advanced BiCMOS, SOI and FinFET nodes.
2010 The Hebistor Device: Novel latch-up immune ESD Protection Clamp for High...Sofics
2010 Taiwan ESD and reliability conference
High voltage interfaces are broadly used in many IC applications like motor control, power management and conversion, LCD panel drivers and automotive systems. Because the high voltage IC's are typically used in severe applications IC designers need to protect their circuits to a steady growing list of requirements. In this paper we present an overview of the ESD, EOS and latch‐up requirements and compare the performance of different on‐chip ESD protection approaches. The paper introduces a newly developed protection device with a high holding voltage for absolute latch‐up immunity.
CP Cases - What is electromagnetic shielding?CP Cases
What is Electromagnetic Interference (EMI) Shielding? How to reduce EMI Shielding in cases and racks. The ERack from CP Cases is a lightweight robust rack case. Transporting mission-critical, fragile and heavy rack equipment made easier.
Elektro Tipp - Array junction boxes: A strong requirement of the IEC standard for protection against electric shock in PV plants.
To know more details click here: http://hensel.in
2011 Latch-up immune ESD Protection Clamp for High Voltage optimized on TSMC ...Sofics
2011 TSMC open innovation Platform
Applications like motor control, power management and conversion, LCD panel drivers and automotive systems require IC interfaces that can tolerate and drive high voltages (10V to 100V). Moreover, in most of these applications the ICs are operated in harsh environments (high temperature, high current/voltage transient disturbance), close to the boundaries of the IC technology. Further, to reduce the Bill of Materials (BOM) system makers are constantly shifting requirements that were once a system/PCB issue to the IC makers. IC makers designing high voltage applications need robust and reliable technology that can meet a growing set of requirements.
Based on TSMC’s comprehensive BCD technology platform in 0.25um and 0.18um, Sofics has developed novel EOS/ESD protection devices that can solve those needs.
This paper first presents an overview of the EOS, ESD, latch-up and other requirements that IC makers face today. Secondly the TSMC BCD technology that was used as the verification platform is touched upon. Finally analysis results and on-going product implementations are shown on 0.25um BCD and 0.18um BCD technology. The unique BCD ESD solutions are available for TSMC foundry customers at a fraction of the development cost.
Lightning and surge transfer to systems presentation by jmv lpsMahesh Chandra Manav
Lightning and Surge Strike and Protection Information from JMV LPS Architect/Electrical Consultants/MEP Consultants/EPC Companies/CEA/REC/PGCIL/Wapcos/Electrical Contractor
The ever-increasing use of high-frequency switching devices in industrial automation can result in high-frequency currents circulating in an equipotential bonding network that was not designed for this purpose. The absence of a proven low-impedance bonding network can result in these currents taking alternative and often undesirable routes. Occasionally these will be the shields of industrial network cables such as PROFIBUS and PROFINET that in turn can lead to intermittent communications problems. This presentation will discuss the issues in more detail and will explain the relevance of the recently released PI guidelines “Functional Bonding and Shielding for PROFIBUS and PROFINET”.
On-Chip ESD Protection Achieving 8kV HBM Without Compromising the 3.4Gbps HDM...Sofics
To maintain signal integrity on HDMI TMDS interfaces ESD protection requires careful design. Moreover, due to direct consumer interaction higher ESD specifications are requested. This paper presents results for an HDMI circuit achieving 8kV HBM without compromising the 3.4Gbps data rate through the use of low capacitive on‐chip ESD clamps.
Pepperl + Fuchs' Emerson Global User Exchange highlights!Kristen_Barbour_PF
Check out the highlights from the Pepperl+Fuchs booth during the 2011 Emerson Global Users Exchange held at the Gaylord Opryland Resort & Convention Center.
#EMRex and @PepperlFuchsUSA
The purpose of this IEEE 1692 Abstract is to familiarize the reader with the faults that are accountable for most of the
unexplained lightning related damage, and explain the advantages of blocking technologies that can effectively isolate
and protect communications and other equipment.
Optimized Local I/O ESD Protection for SerDes In Advanced SOI, BiCMOS and Fin...Sofics
Sofics presentation (B2.2) at the 1st International EOS/ESD Symposium on Design and System (IEDS). IEDS is dedicated to the fundamental understanding of issues related to electrostatic discharge on design and system and the application of this knowledge to the solution of problems.
Semiconductor companies are developing ever faster interfaces to satisfy the need for higher data throughputs. However, the parasitic capacitance of the traditional ESD solutions limits the signal frequency. This paper demonstrates low-cap Analog I/Os for high speed SerDes (28Gbps to 112Gbps) circuits created in advanced BiCMOS, SOI and FinFET nodes.
2010 The Hebistor Device: Novel latch-up immune ESD Protection Clamp for High...Sofics
2010 Taiwan ESD and reliability conference
High voltage interfaces are broadly used in many IC applications like motor control, power management and conversion, LCD panel drivers and automotive systems. Because the high voltage IC's are typically used in severe applications IC designers need to protect their circuits to a steady growing list of requirements. In this paper we present an overview of the ESD, EOS and latch‐up requirements and compare the performance of different on‐chip ESD protection approaches. The paper introduces a newly developed protection device with a high holding voltage for absolute latch‐up immunity.
CP Cases - What is electromagnetic shielding?CP Cases
What is Electromagnetic Interference (EMI) Shielding? How to reduce EMI Shielding in cases and racks. The ERack from CP Cases is a lightweight robust rack case. Transporting mission-critical, fragile and heavy rack equipment made easier.
Elektro Tipp - Array junction boxes: A strong requirement of the IEC standard for protection against electric shock in PV plants.
To know more details click here: http://hensel.in
2011 Latch-up immune ESD Protection Clamp for High Voltage optimized on TSMC ...Sofics
2011 TSMC open innovation Platform
Applications like motor control, power management and conversion, LCD panel drivers and automotive systems require IC interfaces that can tolerate and drive high voltages (10V to 100V). Moreover, in most of these applications the ICs are operated in harsh environments (high temperature, high current/voltage transient disturbance), close to the boundaries of the IC technology. Further, to reduce the Bill of Materials (BOM) system makers are constantly shifting requirements that were once a system/PCB issue to the IC makers. IC makers designing high voltage applications need robust and reliable technology that can meet a growing set of requirements.
Based on TSMC’s comprehensive BCD technology platform in 0.25um and 0.18um, Sofics has developed novel EOS/ESD protection devices that can solve those needs.
This paper first presents an overview of the EOS, ESD, latch-up and other requirements that IC makers face today. Secondly the TSMC BCD technology that was used as the verification platform is touched upon. Finally analysis results and on-going product implementations are shown on 0.25um BCD and 0.18um BCD technology. The unique BCD ESD solutions are available for TSMC foundry customers at a fraction of the development cost.
Lightning and surge transfer to systems presentation by jmv lpsMahesh Chandra Manav
Lightning and Surge Strike and Protection Information from JMV LPS Architect/Electrical Consultants/MEP Consultants/EPC Companies/CEA/REC/PGCIL/Wapcos/Electrical Contractor
The ever-increasing use of high-frequency switching devices in industrial automation can result in high-frequency currents circulating in an equipotential bonding network that was not designed for this purpose. The absence of a proven low-impedance bonding network can result in these currents taking alternative and often undesirable routes. Occasionally these will be the shields of industrial network cables such as PROFIBUS and PROFINET that in turn can lead to intermittent communications problems. This presentation will discuss the issues in more detail and will explain the relevance of the recently released PI guidelines “Functional Bonding and Shielding for PROFIBUS and PROFINET”.
The basis for intelligent automation is communication. The increasing use of communication makes industry increasingly vulnerable for interference. This EMC lecture gives an insight on the disturbance mechanism based on real industrial cases and provides you solutions.
Link vue system offer safety for human and assets (alert 24 x7)Mahesh Chandra Manav
Now Technologies Support Infrastructure offering Human Safety and Industrial Safety and Control Monitoring of Valuable Assets.
Indian Govt is very keen to ensure safety of Human Lives Installation of CCTV and LED Street Light for maximum place to reduce Darkness and this will help to stop criminal activities.
All Public Place , Public Transportation , Shopping Malls , Cinema Halls, Hotels ,Hospitals , Devotional Place , School ,Colleges, Universities, Govt and Pvt Offices, Defense Infra , Railway Station ,Metro Station , Airport Infra, Industrial Plants,
Govt of India Instructed all Liquor Manufacturing , Bottling, Storage and Selling Outlets to Install CCTV which will be access to Excise Central Offices.
Further Advise All Railway Coaches and Station Building should be equipped CCTV .
We request all Architect, MEP and Electrical Consultants, EPC Project and Electrical Contract Companies to send us inquiries and advise for Webinar .
Mahesh Chandra Manav
HOD
Link Vue System Pvt Ltd
India Australia
M-9811247237
manav.chandra@linkvuesystem.com
JMV LPS Ltd Make in India Product for SolarPv,High Energy Storage and Electri...Mahesh Chandra Manav
JMV LPS Ltd Offer Electrical Safety Product for Solar PV ,High Energy Storage ,Electric Vehicle Charging Infra Earthing ,Lightning and Surge Protection ,AJB/DCDB, MC4 Connectors,
Useful Information for SECI,MNRE,NTPC,BHEL,NHPC,SVJN, State Electricity Board,State Power Generation Companies, State Renewable Power Generation Companies, Smart City Projects by States,Ministry of Power ,Ministry of Renewable,Discom Companies,Solar Power Developers,Solar EPC Companies Ground Mounted,Roof Top Projects, Indian Railways ,DMRC,
TAKO SINCE 1979 STOP RM250 MILLION LOSSES WITH MS IEC 62305 LIGHTNING PROTECT...TAKO Lightning System
The large losses suffered as a result of lightning-related damage to electronic equipment highlight how crucial it is to have strong lightning protection for electronic equipment in place in order to reduce risks and protect priceless assets. Purchasing TAKO’s top-notch lightning protection for electronic equipment, including those that meet MS IEC 62305 standards, can lessen the effects that lightning strikes have on a company’s finances and operations. For more information, visit https://takolightningsystem.com/.
Catalog thiết bị đóng cắt Fuji Electric - Molded Case Circuit Breakers Technical Information
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Fuji BC Series MCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Lightning it,s Nature Call ,Many Disaster Seen due to Wrong Selection , Design ,Engineering ,Installation and Periodical Maintenance.
Lightning Kills&Damage our Valuable Assets IEC62305 Claim Conventional for lightning Protection involve many Components Cost is very High,Design and Installation after Maintenance also critical.
Because of Electrical Product Manufacturer worldwide Support Funding IEC Group some of company who manufacturer Conventional Lightning Products funding just to see no other lighting protection Technologies enter&approved by these Committee No Fair Business Practice.
ESE Lightning Protection Always Claim Offering Product Tested by LAB to their customer Easy way to design ,Installation&Total Cost is economical,Maintenance very easy.
Many countries adopted in their Standard.
Manufacturer who is supporting products with LAB Certificate should only entertain many companies in India Supply submitting Forged Certificate .
Indian Government Agencies Releasing Tender for ESE Lighting Solar PV Project , Power Substation Transmission and Distribution , Railway &Metro Rail Projects,
NBC2016 BIS who is influence with IEC not included and cheated Indian Government&Partial approach because of Low Knowledge about Lightning Design&Selection of Products.
Contact us
India is now Exceeding Demand of Power adopting more and More Value Addition Equipment's and Building and Other Infrastructure Like Road Transportation Electric Vehicles 2/3/4 and Heavy Fleet Transportation .
These requirement demand More Power ,Clean and Un-trip Power ,Decentralize of Power Distribution also taking care Environment Pollution Free Solar PV Power ,Wind Power and High Energy Storage Battery Systems .
We have to develop separate Power Distribution EV Charging Infrastructure as per Government promotion and Subsidy for EV Charging Utilization of Power Demand .
We should also do installation Power Transformer supply 800V-1000V AC along with Panels and Battery Storage in all Commercial Charging Station in Highways and Parking Place because power demand will be more than 2 MW if Consider Buses, Car and Other Fleet Transportation .
Our Telecom Infra should be more Strengthen to support these network to help to monitor and Payment Gateway.
Diesel Generators are already BAN in India for Commercial Activities only allow in emergency place like Hospitals and advisory issued to adopt High Energy Power Storage System which can be delivery power in absence of grid for longer duration as per storage of Power and easy to charge when grid is available with lower tariff.
We all have to use maximum Electronic Gadgets help to reduce your working staff and easy to protect , Monitoring ,Control and Access Remotely .
Installation of Networking ,CCTV ,Fire Alarm ,Access Control and other Security System is become mandatory along with Electrical Safety (Earthing .Lightning and Surge Protection).
We have to ensure Cable Installation , Routing and Jointing as per recommendation and monitor periodical with lodge history work done in record.
Maximum Failure Reported found Negligence and Over Sight and Temporary action to resolve problem in break down by Maintenance TEAM.
We have also complaint with all power distribution companies who's duty to ensure 24X7 Power to consumers in the Building and Other infra Dilute major Safety and playing with Human Lives witness many accidents .
Every Fire accidents in Buildings reported Short Circuit how this will be possible when we design all this consideration in the Projects .
This is only increasing Load with out considering safety and Building encroachments extending building near by HT Power Cables mounted on Poles for Power Distribution.
Link Vue System having experience in Electrical Safety ,Automation, Building Automation , Networking, CCTV, Fire Alarm ,Access Control ,Security Systems, PIDS , Industrial Plug and Sockets and Free Electrical Connectors for Building Wiring.
Plz send inquiry , contact us for webinar presentation.
Mahesh Chandra Manav M-9811247237 manav.chandra@linkvuesystem.com
ARDUINO MICROCONTROLLER BASED UNDERGROUND CABLE FAULT DISTANCE LOCATORIAEME Publication
The growing concern for safety and infrastructural proliferations in the densely
populated urban and suburban areas as well as the quest to preserve the aesthetic
values in many modern localities have necessitated the need for underground
installations. The underground cabling installations are devoid of faults common to the
overhead transmission lines but are associated with certain kinds of faults such as short
circuit and open circuit faults. Locating the exact position of any of these kinds of faults
is very exhausting, costly and time-consuming because its power distribution system is
invisible. Hence, a microcontroller based underground cable fault distance locator
powered by Arduino is designed to detect and pinpoint location of faults in underground
cable lines. A basic ohm’s law is employed to achieve the variation of current with
respect to resistance that determines the position of the fault. This device has a power
supply unit, cable unit, control unit, tripping unit and display unit. The power supply
unit provides power to the other components. The cable unit consists of a three-phase
cabling system with switches between each phase to activate faults. The control unit
takes in signals from the cable unit to cause control of tripping unit and display unit.
The tripping unit then detects the phase which encounters the fault and the display unit
shows the fault characteristics on the LCD. The distance to the fault is displayed,
alongside the phase which encounters the fault for easy clearance.
Las sobretensiones son un aumento de voltaje en la red eléctrica medido
entre dos conductores, que puede producir daños en la instalación y en los
equipos eléctricos. Pueden ser de dos tipos: transitorias y permanentes.
Las sobretensiones permanentes, temporales o mantenidas son
aquellas cuya duración es relativamente larga (varios ciclos). Las causas
habituales son:
Las sobretensiones transitorias son un aumento de voltaje, de muy corta
duración, medido entre dos conductores, o entre conductor y tierra.
Puede deberse a descargas eléctricas atmosféricas (rayos) o a procesos
de conmutación o de averías (contacto a tierra o cortocircuito).
Conexión defectuosa del neutro
Bajada de consumo
Overvoltages are an increase of voltage on the electric line, measure between two conductors, which can produce damage on the installations
and the electric equipments.
There are two different types: transient and permanent.
Permanent or power frequency overvoltages are characterized by relatively long duration (several cycles) There are usually caused by:
- Defect connection of the neutral.
- Power consumption lowered.
Transient overvoltages are very short duration increases in voltage
between two conductors or between a conductor and the ground. They
can be on account of atmospheric electrical discharges (lightning), by
switching or by electrical faults (contact with earth or short circuit).
The Apliweld® welding's theory is based on the reduction of copper oxide by metallic aluminium. The reaction is very exothermic, releasing a large amount of energy in the form of heat, reaching temperatures of more than 1000ºC. These conditions allow the welding of the materials by means of the resulting product of the main reaction.
Because its metallic structure, telecommunication towers are very susceptible to lightning strikes receive. Having an adequate lighting protection system will prevent serious losses.
Por ser estructuras metálicas, las torres de telecomunicaciones son muy susceptibles a recibir impactos de rayos. contar con una protección adecuada evita graves pérdidas.
There are many advantages of using exothermic welding. The most important one being that the process produces a molecular joint and not just a mechanical one in between the conductors.
In this way, Apliweld® guarantees all types of common joints, not only copper cable unions but also to weld tapes, brass metallic pieces, stainless steel, steel ground rods covered with copper, etc…
Particularly, the Earth Termination System is essential for Lightning Protection,
since the lightning current should disperse there. Each down-conductor must
have an Earth Termination System, formed by conductive elements in contact
with the soil and able to disperse the lightning current in it.
Internal Protection provides protection against electromagnetic impulses from lightning and to the electrical and electronic equipment located on the structures.
Although transient overvoltages have existed since the creation of electrical networks, the need for protection is nowadays much greater. This is due to advanced technology making electrical components ever smaller and more sensitive to electromagnetic disturbances.
Overvoltages are an increase of voltage measured by two conductors, which can damage the installation and the electrical equipment. There are two different types: transient and permanent.
EXTERNAL PROTECTION against lightning provides protection to structures against physical damage and injuries for contact voltages and contact with human beings. We design and manufacture all the products involved in External Protection.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Assure Contact Center Experiences for Your Customers With ThousandEyes
DOMESTIC LIGHTNING PROTECTION
1. LIGHTNING AND SURGE PROTECTION FOR EQUIPMENT
IN BUSINESS PREMISES AND DOMESTIC USE
2. LIGHTNING AND SURGE PROTECTION
FOR EQUIPMENT IN “Even if the building
is provided with a
BUSINES PREMISES AND DOMESTIC USE proper external
Houses contain now numerous electric and electronic caused by lightning can produce lightning protection
equipments with more complex and important functions. them serious damages. system, surges can
Big electrical appliances such as washing machines or enter the
Even if the building is provided
fridges are robust and can withstand transient overvoltages equipment...”
with a proper external lightning
with no apparent harm at short term. Still their components
protection system, surges can
may suffer degradation or detriment. This damage is
enter the equipment through power supply, telephone
more evident in electronic equipment such as computers
or TV lines or through the earthing system. These lines
or TV sets which peripherals are becoming more costly
come from outside the structure so lightning electromag-
and sophisticated. Besides, these accessories are often
netic pulses may affect them, both a direct strike inter-
interconnected thus increasing the probabilities of being
cepted by the external lightning protection system or a
affected by overvoltages. Houses with automated services
distant discharge.
using domotics are even more exposed, since a computer
failure can lead to severe harms due to the controlled Aplicaciones Tecnológicas, S.A. has designed the basic
appliances. set for an efficient surge protection of most usual domestic
electric and electronic equipment, easy to install and
Business premises have similar problems. Telecommuni-
with an optimized cost. They are a barrier for lightning
cations, electronic systems and security devices are
current at each of the lines connecting the external
essential and they are often interconnected. In many of
environment with your house or premise and your
these premises there are internal computer networks
equipment.
connecting even equipment placed inside different
buildings. Data lines and their connected equipment are
designed for very low voltages and therefore surges
Power supply line
Telephone line
Coaxial line
3. PROTECTION OF POWER SUPPLY LINES
KIT ATCONTROL/B PT-T
Combined Single-Phase Protector against permanent
and transient overvoltages. Includes shunt release and
Miniature Circuit Breaker.
TEMPORARY OVERVOLTAGES
ATCONTROL/B protectors actuate when detecting a temporary
overvoltage, triggering the connected shunt release (S1,
S2). This one disconnects then the associated Main Circuit
Breaker (MCB), thus protecting down-stream installed
equipment.
The temporary overvoltage warning system is formed by 2 light indicators: green (correct power supply) and red
(overvoltage). It is provided with a test button for checking if the installation has been properly made.
TRANSIENT OVERVOLTAGES
ATCONTROL/B protectors also actuate when detecting a transient overvoltage, driving the current to the earth and
reducing the voltage to a level that does not damage the connected equipment. Tested and certified in official and
independent laboratories.
Thermodynamic device for disconnection from the network in case of degradation.
Transient overvoltages warning system that lights up if the protector withstood an overvoltage over its capacity.
Then the protector should be replaced.
Reference AT-8711 AT-8712 AT-8713 AT-8714 AT-8715
Nominal Current 25A 32A 40A 50A 63A
PROTECTION OF TELEPHONE LINES
AT9101 ATFONO
Modular protector for telephone lines
Efficient protection for analogical an ADSL telephone lines,
containing coordinated protection for one pair of lines.
• Protection for telephone lines and also for the digital and analogical
equipment connected to these lines (fax, modem, etc).
• Discharge takes place in an internal encapsulated element, with no
external flash.
• Both common and differential modes of protection.
• Low residual voltage.
• Very fast response.
• Connection with screw pressure, which provides better lightning
current withstanding capacity than usual telephone connectors.
ATFONO SPD has been tested in oficial, independent laboratories,
obtaining their characteristics according to relevant standards.
4. PROTECTION OF COAXIAL LINES
ATFREQ SERIES
Wide range of protectors for differente
frequencies and connectors.
Due to their placement, aerials are one of the most
exposed elements to lightning discharges. Even when
an external lightning protection system exists, the
discharge secondary effects can affect the TV or RF
signals.
ATFREQ Surge Protective Devices protect the signal cable deriving the induced and conducted surges to the ground,
thus avoiding damages to the communication and TV equipment and to the connected devices (DVD, video,
decoders, home cinema sets, etc.)
• Optimum coupling with imperceptible losses.
• Small attenuation in the signal even for very high frequencies.
• Short response time.
• Discharge takes place in an internal encapsulated element, without external flashes.
• Small size.
• Specific connectors for each application.
Frecuency Exchanged DC Sparkover
ATFREQ Connector Attenuation Impedance
Range Power Voltage
AT2104 TV TV 0-1 GHz <1,2dB 75R 50W 90V
AT2103 SAT F (sat.) 0-2 GHz <0,5dB 75R 50W 90V
PROTECTION OF DATA LINES
Only necessary in AT2107 ATLAN UNI RJ-RJ
Single protector for computer networks
case of computer
networks ATLAN SPDs are specially designed to avoid
failures in data transfer between equipments
inside the same network. They protect the input
of the electronic circuits of the network cards
against harms due to transient currents.
ATLAN UNI RJ-RJ is a protector with RJ45 input
and output connectors, with a withstanding current
up to 2kA for every pair of lines.
It is designed to protect individually every single
equipment connected to the computers network.