This document discusses key considerations for cutting garment patterns from checked and striped fabrics. It covers the pattern, grain lines, pile direction, and fabric pattern that must be accounted for before cutting. The key points are:
1) The pattern must clearly communicate all necessary cutting and sewing information. Grain lines on each component indicate its relationship to the fabric. Pile direction may influence how patterns are arranged.
2) Checks and stripes vary in prominence, from bold patterns requiring full matching to indistinct patterns needing no matching. Suitability of the garment pattern and where/when to match depends on the fabric pattern.
3) For checks, both warp and weft patterns must be matched. Stripes
Understanding the guide sheet and symbols pptsrsuganthifbs
Indicates the placement of pattern piece on the fabric grain. Grain line must be placed exactly parallel to the selvage.
Selvage is the fabric edge that will not ravel or fray.
Use tape measure to make sure grain line is parallel to selvage when pinning pattern in place.
Used to match fabric pieces together – show us what to sew together and where.
They are especially helpful in areas requiring easing like sleeves.
May be within garment piece to indicate placement of details like pockets or zippers.
Used to match fabric pieces together – show us what to sew together and where.
They are especially helpful in areas requiring easing like sleeves.
May be within garment piece to indicate placement of details like pockets or zippers.
Dots, Squares, or Triangles
Used to match fabric pieces together – show us what to sew together and where.
They are especially helpful in areas requiring easing like sleeves.
May be within garment piece to indicate placement of details like pockets or zippers
This session seeks to enlighten the learner on what pattern is, its improtance and and ways of obtaining them. it also help you to identify the tools and materials needed for pattern making
pattern making, stitching, cutting procedure in Textile engineering , Pattern making related to garment defects include -A difference in measurement of a garment part from othersMissing pattern partsGrainlie
Pattern not aligned with respect to fabric grainPatterns not facing in the correct direction on napped fabrics Poor line definition leading to inaccurate cuttingSkimpy markingWrong Check BoxingWrong Gradation of Sizes
Some parts of pattern are missing, probably because the marker did not include the correct number of parts.
Mixed parts, probably because the marker is not correctly labeled, resulting in a marriage of wrong sized parts. Patterns not facing in correct direction on napped fabrics. Not all patterns facing in same direction (either way) on a one-way fabric.
Solution:
atterns not aligned with respect to the fabric grain. Poor line definition (e.g. too thick chalk; indistinctly printed line, perforated lay not powdered) leading to inaccurate cutting
Gracika Benjamin , Diploma Fashion Design Second Yeardezyneecole
Portfolio Of Student Of Dezyne E'cole College,Gracika Benjamin , Second Year Fashion Design.This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Sheikh Anjum Firdoush , Diploma Fashion Design Second Yeardezyneecole
Portfolio Of Student Of Dezyne E'cole College,Sheikh Anjum Firdoush , Second Year Fashion Design.This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Harsha Chhaparwal, Diploma Fashion Design Second Yeardezyneecole
Portfolio Of Student Of Dezyne E'cole College,Harsha Chhaparwal , Second Year Fashion Design.This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Harsha Chhaparwal, Diploma Fashion Design Second Yeardezyneecole
Portfolio Of Student Of Dezyne E'cole College,Harsha Chhaparwal , Second Year Fashion Design.This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Harsha Chhaparwal, Diploma Fashion Design Second Yeardezyneecole
Portfolio Of Student Of Dezyne E'cole College,Harsha Chhaparwal , Second Year Fashion Design.This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Sheikh Anjum Firdoush , Diploma Fashion Design Second Yeardezyneecole
Portfolio Of Student Of Dezyne E'cole College,Sheikh Anjum Firdoush , Second Year Fashion Design.This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Sushmita Bhati, Diploma Fashion Design Second Yeardezyneecole
Portfolio Of Student Of Dezyne E'cole College, Sushmita Bhati, Second Year Fashion Design. This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Sushmita Bhati, Diploma Fashion Design Second Yeardezyneecole
Portfolio Of Student Of Dezyne E'cole College, Sushmita Bhati, Second Year Fashion Design. This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Sushmita Bhati, Diploma Fashion Design Second Year, (How to Design for Fashio...dezyneecole
Portfolio Of Student Of Dezyne E'cole College, Sushmita Bhati, Second Year Fashion Design. This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Somya Jain, Diploma Fashion Design Second Year, (How to Design for Fashion In...dezyneecole
Portfolio Of Student Of Dezyne E'cole College, Somya Jain, Second Year Fashion Design. This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Portfolio Of Student Of Dezyne E'cole College , Anurag Yadav , B.Voc-Interior Design First Year .This Is The Portfolio Of His Work From First Year .For More Details Visit www.dezyneecole.com
Namita Bakoliya, Diploma Fashion Design First Year, (Corel Draw Project)dezyneecole
Portfolio Of Student Of Dezyne E'cole College , Namita Bakoliya, First Year Fashion Design.This Is The Portfolio Of Her Work From First Year .For More Details Visit www.dezyneecole.com
Portfolio Of Student Of Dezyne E'cole College,Sheikh Anjum Firdoush , Second Year Fashion Design.This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Portfolio Of Student Of Dezyne E'cole College,Sheikh Anjum Firdoush , Second Year Fashion Design.This Is The Portfolio Of Her Work From Second Year .For More Details Visit www.dezyneecole.com
Gouri Ramchandani, Diploma Fashion Design First Year, (Embroidery Project)dezyneecole
Portfolio Of Student Of Dezyne E'cole College, Gouri Ramchandani, First Year Fashion Design.This Is The Portfolio Of Her Work From First Year .For More Details Visit www.dezyneecole.com
Gouri Ramchandani, Diploma Fashion Design First Year, (Corel DrawProject)dezyneecole
Portfolio Of Student Of Dezyne E'cole College, Gouri Ramchandani, First Year Fashion Design.This Is The Portfolio Of Her Work From First Year .For More Details Visit www.dezyneecole.com
Dimple Mordani, Diploma Fashion Design First Year, (illustration for Fashion ...dezyneecole
Portfolio Of Student Of Dezyne E'cole College , Dimple Mordani, First Year Fashion Design.This Is The Portfolio Of Her Work From First Year .For More Details Visit www.dezyneecole.com
Dimple Mordani, Diploma Fashion Design First Year, (Design Basics Project)dezyneecole
Portfolio Of Student Of Dezyne E'cole College , Dimple Mordani, First Year Fashion Design.This Is The Portfolio Of Her Work From First Year .For More Details Visit www.dezyneecole.com
Dimple Mordani, Diploma Fashion Design First Year, (Corel Draw Project)dezyneecole
Portfolio Of Student Of Dezyne E'cole College , Dimple Mordani, First Year Fashion Design.This Is The Portfolio Of Her Work From First Year .For More Details Visit www.dezyneecole.com
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Honest Reviews of Tim Han LMA Course Program.pptxtimhan337
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
2. Project Report
On
Garment Pattern and Fabric
At
Dezyne E’Cole college
Submitted to
Dezyne E’ Cole college Towards
The partial fulfillment of the
Two year diploma in fashion design
By
NSQF Level 6, of NSDC
2017-18
Dezyne E’Cole college
DIVYA VIJAYVARGIYA
3. ACKNOLEDGEMENT
I take this opportunity to express my profound gratitude and deep regards to Dezyne E ‘Cole College for taking us to
this visit.
I also take this opportunity to express a deep sense of gratitude to the mentors of Dezyne E’ Cole College for their
cardinal support, valuable information and guidance.
2 Year Diploma In Fashion Design
NSQF Level 6 of NSDC
4. This project of Ms. Divya Vijayvargiya student of B.Sc. Fashion Technology with two year Advance Diploma
program has been checked and graded as
5. Contents
Introduction
Garment Pattern & Fabric
The Pattern
Grain Lines
Pile Direction
Fabric Pattern
Introduction to Cutting Checks & Stripes
Fabric Pattern
The Garment Pattern
Matching
Checks
Stripes
6. In this assignment We have to create a project based on the four preparatory process
that the pattern, grain line, pile direction and fabric pattern, are been used before
starting to cut samples
7. .
INTRODUCTION
Clothing technology is a broad based subject because it combines a number of individual
technologies, with each making a specialized contribution to the production of clothing.
All clothing factories have a specific technological capability which has been built around the
production of a particular category of garments. The levels of producing the same garment at
similar time standards. Irrespective of the levels of operation, it is essential that the designer
and pattern cutter both work according to the given framework and when possible, exploit it
to its fullest extent.
For all practical purposes the sample room is the research and development department of a
clothing factory, and one of the technical subjects which has to be examined is cutting. Before
a sample garment can be mass produced its practicability and efficiency as regards cutting
have to be ensured. It is worth bearing in mind that if something does not work in the sample
room, it certainly will not work in the cutting room.
There are four preparatory processes which are to kept in mind before cutting a sample,
which are:
The Pattern – As a medium of communication and as a production tool.
Grain Lines – Establishing the linear relationship between the garment pattern and the
cloth.
Pile Direction – How this influences pattern component arrangements.
Fabric Pattern – What has to be taken into account.
8. .
THE PATTERN
The pattern is the primary link between design and production and so must communicate
accurately with all the functions that have to use the pattern. These functions are pattern
grading, marker planning and sewing, and the pattern has to be clearly and precisely convey
the information necessary to perform each of these operations. This information is conveyed
by numbers, marks, nips, and notches, etc. there should be a pattern for every component to
be cut. Each pattern must be marked on both sides with grain lines and direction indicators.
Patterns should be paired when the garment is to be cut from open rather than folded fabric.
Two practical methods of pairing patterns are by marks and by colours:
By marks – Cut pairs
for each component
and mark on one side
only of each of the
two components
when they are in a
paired position. The
blank sides indicate
correct pairing, as do
the marked sides.
9. .
By Colour – This method requires a pattern card
with a different colour on each side. Staple two
pieces of the card together with the same colour
inside, and then cut out the components. Pairing is
achieved when the same colour shows for a pair of
the same component.
A simple method to ensure the correct face-up positioning is to mark the reverse side of the
components. Every pattern place must be clearly identified as regards style number, garment
type, the material for which the pattern is intended and the number of components in a set
for a particular material, i.e. cloth, lining and fusible.
10. .
GRAIN LINES
This refers to the positioning of pattern components in relation to the true length of
the fabric. For woven materials this line is the knitted fabrics it is the wales. If grain
lines are incorrect, the finished garment will have a distorted appearance which
cannot be rectified. It is essential that each pattern component is marked with a
grain line on both sides for its complete length. The grain line is also often used as a
datum line when digitizing patterns for computerized grading.
11. .
As a general guide, the grain lines for main
components are:
Fronts : Parallel to the center front.
Backs : Parallel to the center back.
Sleeves : On or parallel to the true center line.
Lapel facings : The grain lines runs parallel to the
edge of the lapel section. If this positioning
produces an acute bias angle on the lower part
of the facing, it is sometimes permitted to make
a join across the facing between the top and
second buttonhole.
Patch pockets : Relative to their position on the
front; the grain line is parallel to that of the front.
12. .
• Inset pockets- For piped welted and similar types of
inset pockets, the grain line runs along the Length of
the pocket piece of pieces.
• Top collars- On the Centre back line of the collar.
• Under collars- These can be omnidirectional because
the grain line of the fusible used for this Component is
the controlling the grain line.
• Other parts- Generally, the grain lines can be derived
from the grain line of the component.
13. .
Pile Direction
This describes the lay, length and density of the protruding fibers on the surface of the right
side of the cloth. The question regarding pile is to what extent it influences the positioning of
pattern components on the cloth whilst observing the grain line markings. All fabrics have a
pile factor and for practical purposes they can be grouped under three headings :
One Way – On these fabrics there is a prominent pile
which lays in one direction only. Typical examples of
this type of cloth are corduroy, velvet and mohair. Due
to the very definite pile lay, the components of all the
sizes in a cutting marker must be positioned in one
direction only.
14. .
Two Way : This type of cloth is one of the most widely used in the clothing
industry because the pile factor allows for higher utilization than with one
way fabrics. Whilst these cloths do have a pile factor it is minimal, and this
permits the positioning of components for each size in opposite directions.
This method of positioning patterns in a cutting marker is often referred to as
‘one-up’, one down.
No Pile : Although this heading is a misnomer, it refers to materials which have a virtually
negligible pile factor. This enables components for one size to be positioned in opposite
directions. Fabrics for blouses., shirts and underwear are examples for this widely used group.
15. .
Fabric Pattern
This refers to the form of the pattern on the right side of the cloth, and has three aspects:
One Way : This is where the pattern
form dictates that the garment
patterns for every size in the cutting
marker must be positioned in one
direction only.
Two Way : This type of pattern form
has a definite direction but it is not
sufficiently dominant to warrant one-
way only positioning. In most cases
the pattern components for each size
can be positioned one-up, one-down,
but this decision has to be carefully
evaluated.
16. Non Directional : This type of pattern form has no
definite directions and, subject to the pile factor, pattern
components for one size can be positioned in either
length direction.
17. .
INTRODUCTION
Checks and stripes are called, with good reason, problem materials because of the many
difficulties involved in their cutting and sewing. This is especially true when there are bold
patterns and full matching and symmetry are necessary. There is no one single proven method of
cutting these materials because cloth patterns and garment patterns vary considerably, and there
is always the possibility that the cloth has been distorted during its finishing processes. However,
there are some basic techniques and approaches which can be used and they relate to:
The fabric pattern itself
The suitability of the garment pattern
Where to match the cloth pattern
When symmetry is necessary
Warp
pattern
repeat
Warp
pattern
18. .
FABRIC PATTERN
This is where it all starts because a decision has to be made as to whether the fabric pattern is:
Bold enough to warrant full matching
Sufficiently prominent to require partial matching
Indistinct, and can therefore be safely ignored.
Full Matching
this is necessary when there is a
conspicuous pattern which
if not matched, would create a
visual dissonance on the finished
garment. For checked materials and
those with prominent weft stripes,
this means that the body and
sleeves have to be matched all
round the garment. These fabrics
also require symmetrical elements
and sometimes a degree of
matching of the wrap line pattern.
19. .
Partial Matching
This applies mainly to heavily warp striped
materials, such as a regularly spaced solid
chalk stripe. There are standard features
on garments made from these materials
which require matching and symmetry and
the grain lines play a very important role.
No Matching
If checked or striped materials
have a very small pattern motif,
there is usually no need for
matching or symmetry. What is
essential with this type of material
is that the grain lines must be
strictly observed.
20. .
When planning to make sample garments in checked or striped materials, the designer has to
consider whether the intended designs are suitable for the selected materials.
A fabric with a strong pattern is usually the dominant design feature of a garment and, in
effect, it is the fabric which is being sold and not seaming and decoration. Therefore it follows
that prominent cloth pattern should retain as much of their continuity as possible and not be
broken up by seams, darts etc. In practical terms this means that garment patterns for these
materials should contain the minimum number of components which require matching and
symmetry. A garment design which has a simple assembly will greatly help to minimize the
costs of cutting and sewing.
THE GARMENT PATTERN
Matching – Although there are a number of similarities in matching checked or striped
materials, it is best to consider them individually.
Checks – Cutting these materials has to combine the matching of both the warp and weft
patterns. The size of the warp and weft pattern repeats are the determining factors.
Achieving symmetry with checked materials is complicated by the fact that the weft pattern
also has to be taken into account. Again, the main feature requiring symmetry is the top collar
and the lapel facing and the same principles as with striped materials can be applied to
checked materials, with the proviso that the weft stripes on the collar ends and facing are also
symmetrical. Components such as patch pockets must be symmetrical irrespective of how they
are to be matched.
21. .
Stripes - Apart from special design features, the matching of warp striped materials is concerned
with matching the top collar of the back, and with alignment of the front edges. The techniques
for matching the centre back section of the top collar to the back are exactly the same as those
used for matching the warp pattern of checked materials. The objective is also the same - to
ensure the pattern continuity of the entire back section of the garment.
All types of sewn- in sleeves should be positioned according to their grain lines, and pockets
such as welts and patches should be matched in the area on which they are located. With patch
pockets and flaps on fitted garments, it is not possible to match the entire length of the mouth
of the pocket with the body because of waist darts or shaped seams. Under these
circumstances, it is acceptable to match only the first two or three stripes from the front edge of
the pocket.
What is important for striped material is that the grain line positioning on the cloth should be as
precise as possible. It does not help the appearance of a finished garment if the stripes on
adjoining parts give the impression that they are going in opposing direction.
22. I have created a sample
garment using the four
preparatory processes
of sample cutting.