Diesel engine power plant
•Download as PPTX, PDF•
1 like•1,479 views
This document provides an overview of a seminar report on diesel engine power plants. It describes the key systems of a diesel power plant, including the air intake system, fuel supply system, exhaust system, cooling system, lubricating system, and starting system. It notes that diesel power plants produce 2-50MW of power and are used as backup power sources. The document discusses the advantages of diesel power plants, such as their simple design, limited water needs, and ability to respond quickly to load changes, as well as the disadvantages, which include high costs and noise.
Report
Share
Report
Share
Recommended
STEAM JET COOLING SYSTEM
STEAM JET COOLING SYSTEM
Steam jet cooling system is a cooling technique which involves usage of steam and water for cooling purposes. In steam jet refrigeration systems, water can be used as the refrigerant. Like air, it is perfectly safe. These systems were applied successfully to refrigeration.
•Temperatures attained using water as a refrigerant are in the range which may satisfy air conditioning, cooling, or chilling requirements.
•Mostly low-grade energy and relatively small amounts of shaft work.
•This system are the utilization of mostly low-grade energy and relatively small amounts of shaft work.
•Not used when temperatures below 5°C are required.
Diesel power plant
A generating station in which diesel engine is used as the prime mover for the generation of electrical energy
is known as Diesel power station or Diesel power plant
DIESEL GENERATOR DETAILS
The document provides information about diesel generators, including what they are, how they work, their main components and functions. Some key points:
- A diesel generator is a combination of a diesel engine and an electric generator that generates electrical energy. The diesel engine powers the generator through the motion of its crankshaft.
- In a diesel engine, fuel is injected into compressed hot air in the combustion chamber, where it ignites due to the high temperature from compression. This powers the crankshaft across 4 strokes: intake, compression, power, and exhaust.
- The main components of a diesel generator are the engine, alternator, fuel system, governor, voltage regulator, cooling/exhaust
Gas Turbine Theory - Principle of Operation and Construction
This presentation tells all about basic principle behind Gas Turbine, their working, operation and construction. How they came into existence and where are they used.
Diesel engine power plant
This document provides information about diesel engine power plants. It discusses that diesel power plants generate electricity using diesel engines between 2-50 MW. They have advantages like simple design, less space and water requirements, and lower costs compared to steam plants. However, they also have higher fuel costs and maintenance costs. Diesel power plants are commonly used as backup power sources or for small, remote power supplies where coal and water availability is limited. The document then describes the key components of diesel power plants, including the starting system, air intake, fuel supply, exhaust, cooling, lubrication and governing systems. It provides details on how each system functions within the diesel engine electricity generation process.
A report on Diesel Power Plant
A report on the title DIESEL POWER PLANT. It will be useful endineering students. For more details mail me.
Stirling cycle & its applications
The document discusses the history and working principles of the Stirling engine, an external combustion engine invented in 1816 by Robert Stirling as a safer alternative to steam engines. It describes the ideal Stirling cycle of isothermal expansion and compression processes separated by constant volume heat transfer. The key components of Stirling engines are identified as the working gas, heat exchangers, displacer mechanism, regenerator, and expansion/compression mechanism. Different types of Stirling engines - alpha and beta - are also summarized. Applications highlighted include using solar-powered Stirling engines for water pumping in rural areas.
STEAM POWER PLANT : COMBUSTION PROCESS
This document discusses properties of coal that are important for combustion, including swelling index, grindability, weatherability, sulfur content, heating value, and ash softening temperature. It then covers different methods of coal firing in steam power plants, including hand firing, stoker firing (overfeed and underfeed systems), and pulverized coal firing. Key advantages and disadvantages of different stoker types like chain grate, spreader, single retort, and multi-retort stokers are highlighted.
Recommended
STEAM JET COOLING SYSTEM
STEAM JET COOLING SYSTEM
Steam jet cooling system is a cooling technique which involves usage of steam and water for cooling purposes. In steam jet refrigeration systems, water can be used as the refrigerant. Like air, it is perfectly safe. These systems were applied successfully to refrigeration.
•Temperatures attained using water as a refrigerant are in the range which may satisfy air conditioning, cooling, or chilling requirements.
•Mostly low-grade energy and relatively small amounts of shaft work.
•This system are the utilization of mostly low-grade energy and relatively small amounts of shaft work.
•Not used when temperatures below 5°C are required.
Diesel power plant
A generating station in which diesel engine is used as the prime mover for the generation of electrical energy
is known as Diesel power station or Diesel power plant
DIESEL GENERATOR DETAILS
The document provides information about diesel generators, including what they are, how they work, their main components and functions. Some key points:
- A diesel generator is a combination of a diesel engine and an electric generator that generates electrical energy. The diesel engine powers the generator through the motion of its crankshaft.
- In a diesel engine, fuel is injected into compressed hot air in the combustion chamber, where it ignites due to the high temperature from compression. This powers the crankshaft across 4 strokes: intake, compression, power, and exhaust.
- The main components of a diesel generator are the engine, alternator, fuel system, governor, voltage regulator, cooling/exhaust
Gas Turbine Theory - Principle of Operation and Construction
This presentation tells all about basic principle behind Gas Turbine, their working, operation and construction. How they came into existence and where are they used.
Diesel engine power plant
This document provides information about diesel engine power plants. It discusses that diesel power plants generate electricity using diesel engines between 2-50 MW. They have advantages like simple design, less space and water requirements, and lower costs compared to steam plants. However, they also have higher fuel costs and maintenance costs. Diesel power plants are commonly used as backup power sources or for small, remote power supplies where coal and water availability is limited. The document then describes the key components of diesel power plants, including the starting system, air intake, fuel supply, exhaust, cooling, lubrication and governing systems. It provides details on how each system functions within the diesel engine electricity generation process.
A report on Diesel Power Plant
A report on the title DIESEL POWER PLANT. It will be useful endineering students. For more details mail me.
Stirling cycle & its applications
The document discusses the history and working principles of the Stirling engine, an external combustion engine invented in 1816 by Robert Stirling as a safer alternative to steam engines. It describes the ideal Stirling cycle of isothermal expansion and compression processes separated by constant volume heat transfer. The key components of Stirling engines are identified as the working gas, heat exchangers, displacer mechanism, regenerator, and expansion/compression mechanism. Different types of Stirling engines - alpha and beta - are also summarized. Applications highlighted include using solar-powered Stirling engines for water pumping in rural areas.
STEAM POWER PLANT : COMBUSTION PROCESS
This document discusses properties of coal that are important for combustion, including swelling index, grindability, weatherability, sulfur content, heating value, and ash softening temperature. It then covers different methods of coal firing in steam power plants, including hand firing, stoker firing (overfeed and underfeed systems), and pulverized coal firing. Key advantages and disadvantages of different stoker types like chain grate, spreader, single retort, and multi-retort stokers are highlighted.
Steam generating unit
This document provides information about steam generating units and boiler systems. It defines steam and describes the main uses of steam. It then discusses what a boiler is and how it works to generate steam. The document classifies boilers based on their tube configuration, furnace position, circulation method, and pressure. It proceeds to describe different types of boilers in detail, including fire tube boilers, water tube boilers, packaged boilers, fluidized bed boilers, stoker fired boilers, pulverized fuel boilers, waste heat boilers, and nuclear steam generating systems. It also discusses boiler drum components and functions.
Presentation on coal handling systems
This document provides an overview of coal handling systems used in coal power plants. It discusses key components like stockpiles, stacker/reclaimers, belt feeders, conveyors, and the control systems used. Stockpiles provide surge capacity and are formed using stackers and reclaimed using reclaimers. Belt feeders carry coal from crushers to conveyors. Safety interlocks and procedures are described for operating components like feeders, conveyors, and stacker/reclaimers to handle coal safely and effectively throughout the coal handling process.
5. wire rope and sample problem
The document discusses the design and selection of wire ropes using a PSG design data book. It first provides background on wire ropes, describing their evolution, construction, advantages, and common applications. It then outlines the 11 step procedure for designing a wire rope for a specific application, in this case an elevator. The steps include selecting the wire rope type, calculating design loads, selecting rope diameter, calculating sheave diameter, and determining wire diameter, rope weight, effective load, safety factors, and number of wires required. An example problem applying this 11 step method to design a wire rope for a 60m elevator with a 20kN load is then shown.
Diesel engine power plant
Diesel plant equipment Air intake system
Fuel supply system
Exhaust system
Cooling system
Lubricating system
Starting system
Basics of Gas Turbine Power Plant
Gas turbine plants use compressed air and combustion to drive a turbine and generate power. They have high efficiency, quick start-up times, and can use different fuels. The key components are an air compressor, combustor, and turbine connected by a common shaft. Air is compressed then mixed with fuel and ignited in the combustor. The hot gases drive the turbine which powers the compressor and generator. Axial compressors are commonly used due to their ability to deliver large air volumes at moderate pressures.
ELECTROSTATIC PRECIPITATOR
Electrostatic precipitators use electrostatic charges to remove particulate matter from gas streams. They apply a strong electric field between discharge electrodes and collection plates or tubes. This charges particles as they pass through, forcing them to collect on the plates or tubes. Periodically, the collected particles are removed from the plates by rapping or water spraying and collected in a hopper. Key components include discharge electrodes, collection surfaces, a high voltage power supply, and a particle removal system.
gas turbine power plant.pdf
A gas turbine power plant works by compressing air which is then mixed with fuel and ignited in a combustion chamber. This produces hot gases that spin a turbine, generating power. The key components are the compressor, combustion chamber, and turbine. The compressed air and added fuel are burned in the combustion chamber. This turns the turbine, powering the compressor and external loads. Gas turbines are used for power generation and to drive aircraft, ships, pumps and other machinery.
Power plant economics
The document discusses factors that influence the economic operation of power plants, including load factor, demand factor, and utilization factor. It states that the design and size of power plants should be based primarily on economic considerations and lowering the cost of energy production. Larger plant sizes and higher load factors generally improve efficiency but require greater investment. The document also analyzes economic considerations for different types of power plants such as steam, gas turbine, hydroelectric, and internal combustion engine plants.
Diesel power plant
Diesel power plant,applications, components of DPP, different systems of DPP, plant layout, performance of DPP,advantages & disadvantages of diesel power plant, environmental impacts of DPP
Coal and Ash Handling Power Plant Engineering
The file contains all details of the coal and ash handling systems. This is the part of the subject Power Plant Engineering in GTU in 7th semester.
Ash handling system
Ash handling systems in power plants have three main types: hydraulic, pneumatic, and mechanical. The hydraulic system uses high pressure water jets to carry hot ash through channels from the furnace to an ash sump, where it is separated from water and transported for disposal. The pneumatic system uses high velocity air or steam to move crushed ash through pipes to a collection point, with filters to remove dust from exhaust air. The mechanical system conveys cooled ash on belt conveyors from the furnace to an ash bunker, from which trucks transport it to the dumping site. Proper site selection for power plants considers factors like available water, distance from load centers and populated areas, accessibility, and space for waste disposal.
Power Plant cost & its site selection
This is just for knowledge, because given data in this is 2008. now some government policies has been changed so its cost maybe or maybe less as compared to this data.
Steam turbine
This document discusses the key aspects of a 134 MW steam turbine. It begins by defining a steam turbine as a device that extracts thermal energy from pressurized steam and converts it into mechanical energy. It then provides specific design data for a 134 MW turbine, including its rated output, speed, steam conditions, number of extractions and stages. The document goes on to classify turbines based on their steam flow, type of energy conversion, compounding, cylinder arrangement, and exhaust conditions. It describes impulse, reaction, and combined impulse-reaction turbines as well as tandem and cross-compound cylinder arrangements.
Gas turbine
A gas turbine uses a gaseous working fluid to generate mechanical power that can power industrial devices. It has three main parts - an air compressor, combustion chamber, and turbine. The air is compressed in the compressor, mixed with fuel and ignited in the combustion chamber, and the hot gases spin the turbine to generate power. Some applications of gas turbines include aviation, power generation, and the oil and gas industry. The efficiency of gas turbines is typically 20-30% compared to 38-48% for steam power plants.
Coal and ash handling systems
This document discusses coal handling and storage methods at power plants. It describes dead storage or outdoor storage where coal is piled directly on the ground, which can lead to spontaneous combustion from oxidation. It then discusses live storage in vertical bunkers or silos. The document also covers different types of stoker firing systems used to burn coal, including travelling grate stokers and spreader stokers. Finally, it summarizes pulverized coal firing and the unit and central systems used to grind, dry and feed pulverized coal to boiler furnaces.
Important parts of a centrifugal fan
Centrifugal fan which is also called as squirrel cage fan because of its hamster wheel design is widely used to move air/gas continuously in industries and commercial applications. The speed of the air stream entering into the fan, is increased by the impeller thereby it gains kinetic energy and accelerates radially changing the direction by 90°. As these fans are capable of displacing constant volume of air/gas at increased speed, they are widely used in various process applications in industries such as in material handling, boiler applications, transporting gas or materials, ventilation and combustion, air circulation and in other HVAC systems.
Ash Handling System of a Thermal Power Plant
This document describes an ash handling system in a thermal power plant. It discusses the different components of the system including the bottom ash handling system, coarse ash handling system, fly ash handling system and ash slurry disposal system. Ash is generated during coal combustion and constitutes 30-40% of the total coal consumption. The ash handling system ensures the ash is properly managed, utilized or disposed of.
Combined Cycle Gas Turbine Power Plant Part 1
Introduction to Combined Cycle Gas Turbine Power Plant. Describing the advantage and design limit of the CCGT. Overview of Brayton Cycle and Rankine Cycle - showing some basic thermodynamic to explain some background of CCGT.
Chain drives
The document discusses key concepts related to chain drives, including:
1) It defines common terms used in chain drives like pitch, pitch circle diameter, and velocity ratio.
2) It describes different types of chains including hoisting/hauling chains, conveyor chains, and power transmitting chains like roller chains and silent chains.
3) It provides equations for calculating important chain drive dimensions and specifications like length of chain, center distance, factor of safety, power transmitted, and number of teeth on sprockets.
Diesel power plant
The document discusses diesel power plants. It describes how a diesel engine is used as the prime mover to generate electrical energy in a diesel power plant. Diesel power plants are installed in locations where coal, water, and large quantities of power are not readily available or for emergency backup power. The document outlines the key components of diesel power plants including the engine, fuel supply system, air intake system, cooling system, and others. It also covers the working principles of diesel engines and different types of diesel engines and fuel injection systems used in diesel power plants.
Diesel engine power plant
Diesel power plants use diesel engines as the prime mover to generate electricity in the range of 2 to 50MW. They are commonly used as backup power sources for critical facilities like hospitals, telephone exchanges, and industries during peak loads. Diesel power plants have several systems, including the air intake system, which draws air through a filter into the engine cylinder. The fuel supply system pumps fuel from a storage tank through a filter and injects it into the cylinder. The exhaust system uses a silencer to reduce noise from the engine gases expelled into the atmosphere. Cooling and lubrication systems are also required to regulate the engine's temperature and reduce wear on moving parts. While diesel power plants have advantages like simple design, quick start
Diesel power plant Description
Diesel power plants use diesel engines as the prime mover to generate electricity. They are suitable for small to medium outputs up to 5MW. The key components of a diesel power plant include the diesel engine, fuel system, intake system, exhaust system, cooling system, lubricating system, starting/stopping system, and governing system. The generator converts the mechanical energy from the engine into electrical energy. Diesel power plants have advantages such as small size, quick start-up, and lower capital costs compared to steam plants. However, their operating costs are higher due to fuel costs and they are limited to outputs below 15MW.
More Related Content
What's hot
Steam generating unit
This document provides information about steam generating units and boiler systems. It defines steam and describes the main uses of steam. It then discusses what a boiler is and how it works to generate steam. The document classifies boilers based on their tube configuration, furnace position, circulation method, and pressure. It proceeds to describe different types of boilers in detail, including fire tube boilers, water tube boilers, packaged boilers, fluidized bed boilers, stoker fired boilers, pulverized fuel boilers, waste heat boilers, and nuclear steam generating systems. It also discusses boiler drum components and functions.
Presentation on coal handling systems
This document provides an overview of coal handling systems used in coal power plants. It discusses key components like stockpiles, stacker/reclaimers, belt feeders, conveyors, and the control systems used. Stockpiles provide surge capacity and are formed using stackers and reclaimed using reclaimers. Belt feeders carry coal from crushers to conveyors. Safety interlocks and procedures are described for operating components like feeders, conveyors, and stacker/reclaimers to handle coal safely and effectively throughout the coal handling process.
5. wire rope and sample problem
The document discusses the design and selection of wire ropes using a PSG design data book. It first provides background on wire ropes, describing their evolution, construction, advantages, and common applications. It then outlines the 11 step procedure for designing a wire rope for a specific application, in this case an elevator. The steps include selecting the wire rope type, calculating design loads, selecting rope diameter, calculating sheave diameter, and determining wire diameter, rope weight, effective load, safety factors, and number of wires required. An example problem applying this 11 step method to design a wire rope for a 60m elevator with a 20kN load is then shown.
Diesel engine power plant
Diesel plant equipment Air intake system
Fuel supply system
Exhaust system
Cooling system
Lubricating system
Starting system
Basics of Gas Turbine Power Plant
Gas turbine plants use compressed air and combustion to drive a turbine and generate power. They have high efficiency, quick start-up times, and can use different fuels. The key components are an air compressor, combustor, and turbine connected by a common shaft. Air is compressed then mixed with fuel and ignited in the combustor. The hot gases drive the turbine which powers the compressor and generator. Axial compressors are commonly used due to their ability to deliver large air volumes at moderate pressures.
ELECTROSTATIC PRECIPITATOR
Electrostatic precipitators use electrostatic charges to remove particulate matter from gas streams. They apply a strong electric field between discharge electrodes and collection plates or tubes. This charges particles as they pass through, forcing them to collect on the plates or tubes. Periodically, the collected particles are removed from the plates by rapping or water spraying and collected in a hopper. Key components include discharge electrodes, collection surfaces, a high voltage power supply, and a particle removal system.
gas turbine power plant.pdf
A gas turbine power plant works by compressing air which is then mixed with fuel and ignited in a combustion chamber. This produces hot gases that spin a turbine, generating power. The key components are the compressor, combustion chamber, and turbine. The compressed air and added fuel are burned in the combustion chamber. This turns the turbine, powering the compressor and external loads. Gas turbines are used for power generation and to drive aircraft, ships, pumps and other machinery.
Power plant economics
The document discusses factors that influence the economic operation of power plants, including load factor, demand factor, and utilization factor. It states that the design and size of power plants should be based primarily on economic considerations and lowering the cost of energy production. Larger plant sizes and higher load factors generally improve efficiency but require greater investment. The document also analyzes economic considerations for different types of power plants such as steam, gas turbine, hydroelectric, and internal combustion engine plants.
Diesel power plant
Diesel power plant,applications, components of DPP, different systems of DPP, plant layout, performance of DPP,advantages & disadvantages of diesel power plant, environmental impacts of DPP
Coal and Ash Handling Power Plant Engineering
The file contains all details of the coal and ash handling systems. This is the part of the subject Power Plant Engineering in GTU in 7th semester.
Ash handling system
Ash handling systems in power plants have three main types: hydraulic, pneumatic, and mechanical. The hydraulic system uses high pressure water jets to carry hot ash through channels from the furnace to an ash sump, where it is separated from water and transported for disposal. The pneumatic system uses high velocity air or steam to move crushed ash through pipes to a collection point, with filters to remove dust from exhaust air. The mechanical system conveys cooled ash on belt conveyors from the furnace to an ash bunker, from which trucks transport it to the dumping site. Proper site selection for power plants considers factors like available water, distance from load centers and populated areas, accessibility, and space for waste disposal.
Power Plant cost & its site selection
This is just for knowledge, because given data in this is 2008. now some government policies has been changed so its cost maybe or maybe less as compared to this data.
Steam turbine
This document discusses the key aspects of a 134 MW steam turbine. It begins by defining a steam turbine as a device that extracts thermal energy from pressurized steam and converts it into mechanical energy. It then provides specific design data for a 134 MW turbine, including its rated output, speed, steam conditions, number of extractions and stages. The document goes on to classify turbines based on their steam flow, type of energy conversion, compounding, cylinder arrangement, and exhaust conditions. It describes impulse, reaction, and combined impulse-reaction turbines as well as tandem and cross-compound cylinder arrangements.
Gas turbine
A gas turbine uses a gaseous working fluid to generate mechanical power that can power industrial devices. It has three main parts - an air compressor, combustion chamber, and turbine. The air is compressed in the compressor, mixed with fuel and ignited in the combustion chamber, and the hot gases spin the turbine to generate power. Some applications of gas turbines include aviation, power generation, and the oil and gas industry. The efficiency of gas turbines is typically 20-30% compared to 38-48% for steam power plants.
Coal and ash handling systems
This document discusses coal handling and storage methods at power plants. It describes dead storage or outdoor storage where coal is piled directly on the ground, which can lead to spontaneous combustion from oxidation. It then discusses live storage in vertical bunkers or silos. The document also covers different types of stoker firing systems used to burn coal, including travelling grate stokers and spreader stokers. Finally, it summarizes pulverized coal firing and the unit and central systems used to grind, dry and feed pulverized coal to boiler furnaces.
Important parts of a centrifugal fan
Centrifugal fan which is also called as squirrel cage fan because of its hamster wheel design is widely used to move air/gas continuously in industries and commercial applications. The speed of the air stream entering into the fan, is increased by the impeller thereby it gains kinetic energy and accelerates radially changing the direction by 90°. As these fans are capable of displacing constant volume of air/gas at increased speed, they are widely used in various process applications in industries such as in material handling, boiler applications, transporting gas or materials, ventilation and combustion, air circulation and in other HVAC systems.
Ash Handling System of a Thermal Power Plant
This document describes an ash handling system in a thermal power plant. It discusses the different components of the system including the bottom ash handling system, coarse ash handling system, fly ash handling system and ash slurry disposal system. Ash is generated during coal combustion and constitutes 30-40% of the total coal consumption. The ash handling system ensures the ash is properly managed, utilized or disposed of.
Combined Cycle Gas Turbine Power Plant Part 1
Introduction to Combined Cycle Gas Turbine Power Plant. Describing the advantage and design limit of the CCGT. Overview of Brayton Cycle and Rankine Cycle - showing some basic thermodynamic to explain some background of CCGT.
Chain drives
The document discusses key concepts related to chain drives, including:
1) It defines common terms used in chain drives like pitch, pitch circle diameter, and velocity ratio.
2) It describes different types of chains including hoisting/hauling chains, conveyor chains, and power transmitting chains like roller chains and silent chains.
3) It provides equations for calculating important chain drive dimensions and specifications like length of chain, center distance, factor of safety, power transmitted, and number of teeth on sprockets.
Diesel power plant
The document discusses diesel power plants. It describes how a diesel engine is used as the prime mover to generate electrical energy in a diesel power plant. Diesel power plants are installed in locations where coal, water, and large quantities of power are not readily available or for emergency backup power. The document outlines the key components of diesel power plants including the engine, fuel supply system, air intake system, cooling system, and others. It also covers the working principles of diesel engines and different types of diesel engines and fuel injection systems used in diesel power plants.
What's hot (20)
Similar to Diesel engine power plant
Diesel engine power plant
Diesel power plants use diesel engines as the prime mover to generate electricity in the range of 2 to 50MW. They are commonly used as backup power sources for critical facilities like hospitals, telephone exchanges, and industries during peak loads. Diesel power plants have several systems, including the air intake system, which draws air through a filter into the engine cylinder. The fuel supply system pumps fuel from a storage tank through a filter and injects it into the cylinder. The exhaust system uses a silencer to reduce noise from the engine gases expelled into the atmosphere. Cooling and lubrication systems are also required to regulate the engine's temperature and reduce wear on moving parts. While diesel power plants have advantages like simple design, quick start
Diesel power plant Description
Diesel power plants use diesel engines as the prime mover to generate electricity. They are suitable for small to medium outputs up to 5MW. The key components of a diesel power plant include the diesel engine, fuel system, intake system, exhaust system, cooling system, lubricating system, starting/stopping system, and governing system. The generator converts the mechanical energy from the engine into electrical energy. Diesel power plants have advantages such as small size, quick start-up, and lower capital costs compared to steam plants. However, their operating costs are higher due to fuel costs and they are limited to outputs below 15MW.
Diesel engine powerplant
The document discusses the components and operation of a diesel power plant. It describes the key components as the diesel engine, air intake and filtration system, fuel supply system, exhaust system, cooling system, lubrication system, and starting system. The diesel engine compresses air which is then mixed with injected fuel and ignited to power a generator. The plant has advantages of simple design, limited water needs, and ability to respond quickly to load changes, but also has higher maintenance costs and noise compared to other power sources.
Power plant engineering
This document discusses the applications and layout of a diesel power plant. It describes how diesel power plants can be used as central stations for small or medium power supplies, as stand-by plants for hydroelectric or steam plants, and as peak load plants. It also notes their use for mobile power generation. The major systems of a diesel power plant are then outlined, including the engine, starting, lubrication, fuel, air, cooling, exhaust, and governing systems. Advantages like compact size and quick start up are contrasted with disadvantages like high fuel and maintenance costs.
Diesel power plant ppt
A diesel power plant uses a diesel engine as the prime mover to generate electricity. It typically generates 2-50 MW of power. The main components are the diesel engine, air intake system, fuel supply system, exhaust system, cooling system, lubricating system, and starting system. The diesel engine compresses air which is then mixed with fuel and ignited. The engine is directly coupled to a generator to produce electricity. The plant has advantages of simple design, quick start up, and ability to handle varying loads. Disadvantages include high operating costs, noise issues, and inability to be constructed at a large scale.
Diesel power plant
The document provides an overview of diesel power plant engineering. It discusses the key components of a diesel power plant including the diesel engine, starting system, fuel supply system, air intake system, lubrication system, cooling system, exhaust system, and governing system. It describes the basic four-stroke operating cycle of a diesel engine and highlights advantages such as simple design and ability to handle varying loads, as well as disadvantages like high operating costs.
Diesel power plant
In a diesel power plant, a diesel engine acts as the prime mover by using diesel fuel for combustion. The combustion products provide the working fluid that produces mechanical energy, which is then converted to electrical energy by an alternator driven by the diesel engine. The key systems in a diesel power plant include the air intake, fuel supply, lubrication, engine cooling, starting, exhaust, and electrical systems. Diesel power plants have advantages such as simplicity, compact size, mobility and quick start-up times. However, they also have disadvantages like high fuel and maintenance costs and an inability to handle overloads for long periods.
DIESEL ENGINE POWER PLANT
Diesel engine power plant ,Introduction ,General lay-out ,Various system , Applications ,Advantages ,Disadvantages
Diesel power plant
In the diesel engine power plant the fuel mixture and air is used as a working medium.
During the time of the suction stroke atmospheric air enters the combustion chamber.
Diesel power plants produce power in the range of 2 to 50MW.
Diesel power plant
The document summarizes a presentation on diesel power plants. It describes how diesel engines drive generators to produce electricity and are used for small power supply. Key components include the diesel engine, fuel supply system, air intake, exhaust, cooling, lubrication, and starting systems. Generators can be AC or DC. Injection systems include common rail, individual pump, and distributor types. Diesel power plants have advantages like simple design, quick starting, and high efficiency, but also disadvantages like high fuel and maintenance costs and inability to handle overloads.
Internal combustion engine plant diesel power plant
Introduction – IC Engines, types, construction– Plant layout with auxiliaries – fuel supply system, air starting equipment, lubrication and cooling system – super charging
Unit_ii_Power plants_Diesel.pdf
Diesel power plants use diesel engines to generate electricity. The diesel burns inside the engine, powering it to turn an alternator that converts the mechanical energy to electrical energy. Diesel power plants are used for small-scale electricity generation between 2-50 MW. They have applications as central stations for small communities, backup power, and emergency power generation. Key components include the diesel engine, fuel supply system, air intake, exhaust, cooling, lubrication, starting systems, and AC/DC generators.
Diesel power plant
A simple yet effective presentation on Diesel Power Plant. It helps you to revise the concepts, present yourself in seminars, and save your time.
Diesel Power Plant
A diesel power plant is the combination of a diesel engine with an electric generator to generate electrical energy. A diesel compression-ignition engine is usually designed to run on diesel fuel, but some types are adapted for other liquid fuels or natural gas.
Ppt thermal eng..
This document summarizes key components of internal combustion engine systems. It discusses fuel supply systems for petrol and diesel engines, including common rail and individual pump systems. It also describes lubrication systems like petrol, splash, pressure and dry sump. Cooling systems like air and water cooling are outlined. The ignition system for spark ignition engines including coil and magneto systems are summarized. Key details are provided about components and their functions in less than 3 sentences.
Limitations of air-cooled diesel engine
The article is all about the mechanism of air-cooled diesel engines. We have built a comparison between liquid-cooled diesel and air-cooled diesel engines to get better the context.
Cooling System in Automobile
The document discusses different types of engine cooling systems for automobiles. It describes the key components and functioning of liquid cooling systems, which use coolant circulating through the engine to draw heat away. Air or direct cooling systems that use fins and baffles to increase surface area exposed to airflow are also covered. Oil cooling systems are mentioned as an alternative that can transfer engine heat to the oil before passing through a radiator. The document provides details on the requirements, advantages, and disadvantages of each type of cooling system.
cooling system in ic engine 1.pptx
kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
cooling system in ic engine 1.pptx
kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
Similar to Diesel engine power plant (20)
Power plant Diesil Engine system set up and maintenance
Power plant Diesil Engine system set up and maintenance
Internal combustion engine plant diesel power plant
Internal combustion engine plant diesel power plant
More from Slidegiant
Pulse laser micro polishing
This document describes a seminar on pulse laser micro polishing (PLμP) that investigates the effect of laser pulse duration on surface roughness reduction. It presents theoretical predictions showing that longer pulse durations attenuate longer wavelength surface features. An experimental study is conducted using near-infrared laser pulses to polish Ti6Al4V surfaces produced by micro end milling at pulse durations of 650ns, 1.91μs, and 3.6μs. Results show up to 70% reduction in surface roughness and cross-sectional analysis indicates longer pulse durations produce deeper heat affected zones. Overall, the study finds that longer pulse durations result in smoother polished surfaces.
Welded wire mesh
This document provides information on welded wire mesh, including:
- Welded wire mesh is made through an automatic welding process and is used in cement construction and fencing.
- The project will operate two 8-hour shifts per day for 300 days per year at an assumed 75% capacity the first year and 100% thereafter.
- Implementation will include procuring machinery over 12 weeks, erecting the factory over 8 weeks, and recruiting personnel over 3-4 weeks.
- Production capacity is estimated at 3,384 metric tons annually worth Rs. 507.60 lakhs with minimal expected pollution.
M.s. and high tensile nuts and bolts
This document discusses a proposal for starting a nuts and bolts manufacturing business. It covers the market potential and uses for nuts and bolts in various industries. It also outlines the implementation schedule, production process, machinery required, financial projections, and profitability analysis. The business is projected to have annual sales of Rs. 1.15 crore and net profit of Rs. 15.97 lakh, with a break-even point of 52% and rate of return of 26%.
Electro beam machining
This document discusses electron beam machining (EBM). EBM uses a focused beam of high-velocity electrons to melt and vaporize material from a workpiece. It operates within a vacuum chamber at pressures of 10^-5 mm Hg. The electron gun generates the beam using a tungsten filament, grid cup, and anode. The beam is focused by electromagnetic lenses and its path is controlled by deflector coils. EBM can machine any material, achieves close tolerances with no tool wear, and concentrates heat at a small spot. However, it requires high vacuum and power while providing a low material removal rate. Applications include microdrilling and machining materials with low thermal conductivity.
Monoset water pumps
The document discusses Monoset water pumps. Monoset pumps have the pump and prime mover mounted on the same shaft, avoiding mechanical transmission losses from coupling. There is good market potential for Monoset pumps among farmers and irrigation departments given their low cost, simple construction, and easy maintenance compared to other pump types. The document outlines the production process, technical aspects, quality standards, production capacity, and financial feasibility analysis of establishing a Monoset pump manufacturing business.
Alcohol as analternative fuel
This document discusses E85 fuel, which is a blend of 85% ethanol and 15% gasoline. E85 provides higher octane than gasoline and can be used in flexible fuel vehicles that are designed to run on gasoline, E85, or blends of both. While ethanol has some advantages like reducing emissions, it also has disadvantages like lower energy content requiring more fuel. The document outlines the history, production, characteristics, and applications of E85 fuel. Countries like Brazil and the US are leaders in ethanol production and use E85 in vehicles.
Auto pistons
This document provides information on establishing a business to manufacture auto pistons using gravity die casting of aluminum alloys. It discusses the market potential for auto pistons, noting demand is expected to grow 15-20% annually. The production process involves choosing suitable aluminum alloys, casting pistons, and implementing quality control standards. Financial analysis shows the business would require $167,000 total capital investment and could expect a 31.3% return on investment at full production of 60,000 pistons per year with $5,200 annual profit.
Steam power plant
This document provides an overview of the key components and processes in a steam power plant. It describes how coal is handled and burned to produce steam, which is then used to power a steam turbine connected to an alternator to generate electricity. The steam is condensed back into water and fed into the boiler to complete the Rankine cycle. Steam power plants currently contribute about 65% of India's total electrical energy production.
edm
This document summarizes electro discharge machining (EDM). EDM was invented in 1943 and uses electrical sparks to remove material from a conductive workpiece. There are two main types: die-sinking EDM and wire-cut EDM. The document discusses the construction, working principle, tool materials, dielectrics used, machining ratios, process parameters, advantages, and applications of EDM for complex shapes and hard materials.
fuel cell
This document discusses fuel cells, including their parts, working principle, types, advantages, disadvantages, and applications. Fuel cells generate electricity through an electrochemical reaction between hydrogen and oxygen, without combustion. They have higher efficiency than combustion engines and produce only water emissions. However, fuel cells are currently more expensive than batteries. Major applications of fuel cells include powering vehicles, devices, and buildings. Several organizations are working to develop fuel cell technology further.
Ashis
This document summarizes electro discharge machining (EDM). EDM was invented in 1943 and uses electrical sparks to remove material from a conductive workpiece. There are two main types: die-sinking EDM and wire-cut EDM. The document discusses the construction, working principle, tool materials, dielectrics used, machining ratios, process parameters, advantages, and applications of EDM for complex shapes and hard materials.
More from Slidegiant (11)
Recently uploaded
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaCHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Diesel engine power plant
- 2. CONTENT: INTRODUCTION LAYOUT OF DIESEL POWER PLANT DIESEL PLANT EQUIPMENT AIR INTAKE SYSTEM FUEL SUPPLY SYSTEM EXHUST SYSTEM COOLING SYSTEM LUBRICATING SYSTEM STARTING SYSTEM ADVANTAGE DISADVANTAGE REFERANCE
- 3. INTRODUCTION Diesel power plants produce power in the range of 2 to 50MW. They are used as standby sets for continuity of supply such as hospitals , telephone exchanges , radio station , cinema theatres and industries. They are suitable for mobile power generation and widely used in railways and ships.
- 4. BASICTYPE OF IC ENGINE
- 5. DIESEL PLANT EQUIPMENT Air intake system Fuel supply system Exhaust system Cooling system Lubricating system Starting system
- 6. AIR INTAKE SYSTEM The air required for the combustion of fuel inside the diesel engine cylinder is drawn through the air filter. The purpose of the filter is to remove dust from the incoming air. dry filter- may be made of felt , wood or cloth. wet filter- oil bath is used.
- 7. FUEL SUPPLY SYSTEM Fuel from the storage tank is pumped through a filter into a smaller tank called all day tank . this tank supplies the daily requirements of the diesel engine.
- 8. EXHAUST SYSTEM The exhaust gases coming out of the engine is very noisy. In order to reduce the noise a silencer is used.
- 9. COOLING SYSTEM The temperature of the burning fuel inside the engine cylinder -15000C to 20000C. In order to lower this temperature water is circulated around the engine. The hot water leaving the jacket is passed through the heat exchanger. The heat from the heat exchanger is carried away by the raw water circulated through the heat exchanger and is cooled in the cooling tower
- 10. LUBRICATING SYSTEM This circuit includes lubricating oil tank , oil pump and oil cooler. The purpose of the lubrication system is to reduce the wear of the engine moving parts .part of the cylinder such as piston , shafts , valves must be lubricated. Lubrication also helps to cool the engine.
- 11. STARTING SYSTEM Diesel engine used in diesel power plant is not self starting . The engine is started from cold condition with the help of an air compressor. Schematic diesel engine power plant
- 12. ADVANTAGE OF DIESEL POWER PLANT 1. Very simple design also simple installation and occupies less space. 2. Limited cooling water requirement. 3. Diesel power plant are more efficient than steam power in the range of 150MW capacity. 4. Quickly started and put on load. 5.It can respond to varying loads without any difficulty. 6. Smaller storage is needed for the fuel. 7. Layout of power plant is quite simple. 8. Less supervision required.
- 13. DISADVANTAGE OF DIESEL POWER PLANT 1. High Maintenance ,lubrication cost and operating cost. 2. Fuel cost is more, since in India diesel is costly. 3. The plant cost per kW is comparatively more. 4. The life of diesel power plant is small due to high maintenance. 5. Noise is a serious problem in diesel power plant. 6. Diesel power plant cannot be constructed for large scale.