Design Sequence of Works In Design & Build Projects
•
5 likes•604 views
The document outlines the design process and approval steps for a design and build project, including submission and approval of concept design, schematic design, detailed design, installation drawings, and shop drawings. It involves iterative submissions of structural, architectural, MEP, electrical, landscaping, and other designs to the client and consultants for review and approval at interim and final stages before construction can begin.
Report
Share
Report
Share
Download to read offline
Recommended
Project Execution Plan for High Rise Building
The purpose of this presentation is to give an understanding of the Methods, Plant and Sequence to construct a high-rise building.
This presentation can be used to engage Stakeholders and to get the Site Teams commitment to the programme. Also can be used for Induction Training and as a way to capture and share knowledge.
62617938 launching-girder
This document provides information about launching girders for bridge construction. It discusses the necessary preparations before launching including completing abutments and piers. It describes the launching equipment used such as the steel launching girder, winches, and trolleys. The document outlines the process for shifting the launching girder and launching precast concrete girders segment by segment onto the bridge. It compares different launching techniques and discusses advantages such as allowing construction at any height and simultaneous work on substructure and superstructure.
Tower crane Basics
Tower cranes are cranes that are fixed to the ground with a horizontal boom that is balanced asymmetrically by a short arm carrying a counterweight and a long arm that carries the lifting gear. They have several main components including a base, mast or fixed tower, swing ring, boom, and counterweight. Tower cranes provide many benefits to construction projects by saving time, being multipurpose, and allowing for optimum utilization of resources, though they also have some disadvantages like being cumbersome to erect and dismantle and requiring skilled operators.
Safety in construction
This document discusses safety in the construction industry in India. It begins with an introduction to construction and issues of safety due to extensive labor use. It then defines safety and discusses why safety is an issue due to frequent accidents resulting in losses. The document outlines common accident causes like human factors, faulty work practices, and structural failures. It also discusses effects of accidents like loss of life, time, and costs. The document concludes with recommendations to ensure safety such as the role of designers, safety programs, appointing safety officers, and using personal protective equipment.
SCAFFOLDING
This document provides information on scaffolding safety. It defines what a scaffold is and lists common hazards like collapse, falls, and electrocution. It also discusses assessing risks, controlling risks through means like fall protection, and planning scaffolding work. Different types of scaffolds are described, including tower, mobile, tube and coupler, frame, hung, suspended, trestle, and cantilever scaffolds. Load considerations, materials, and safe erection procedures are outlined.
Health and Safety in Construction PPT
The document discusses personal health and safety responsibilities in construction. It lists responsibilities such as working safely, wearing proper protective equipment like goggles and steel toe boots, keeping work areas tidy, and being respectful of others. It also discusses regulations, roles, and responsibilities related to health and safety, including common regulations, employer responsibilities, and employee responsibilities.
EPC Contracts
The document discusses Engineering, Procurement, and Construction (EPC) contracts. It defines EPC as a contract that includes engineering, procurement, and construction activities. It notes that an EPC contract can be for a full project scope, making it equivalent to a turnkey contract, or only part of a project scope. The document examines what types of work can be included in an EPC contract and provides several case studies analyzing whether hypothetical contract scenarios would qualify as EPC contracts. It also reviews common clauses that should be included in EPC contracts such as related to securities, time/delay, determination of contract, and arbitration.
Construction Safety Management
This document discusses construction safety management. It covers the roles and responsibilities of various parties in ensuring construction safety such as top management, site managers, supervisors, safety officers, and general employees. It also discusses approaches to improving safety through organizational, physical, and behavioral changes. Key aspects of safety management discussed include developing safety manuals, committees, training programs, inspections, investigations, and incentives.
Recommended
Project Execution Plan for High Rise Building
The purpose of this presentation is to give an understanding of the Methods, Plant and Sequence to construct a high-rise building.
This presentation can be used to engage Stakeholders and to get the Site Teams commitment to the programme. Also can be used for Induction Training and as a way to capture and share knowledge.
62617938 launching-girder
This document provides information about launching girders for bridge construction. It discusses the necessary preparations before launching including completing abutments and piers. It describes the launching equipment used such as the steel launching girder, winches, and trolleys. The document outlines the process for shifting the launching girder and launching precast concrete girders segment by segment onto the bridge. It compares different launching techniques and discusses advantages such as allowing construction at any height and simultaneous work on substructure and superstructure.
Tower crane Basics
Tower cranes are cranes that are fixed to the ground with a horizontal boom that is balanced asymmetrically by a short arm carrying a counterweight and a long arm that carries the lifting gear. They have several main components including a base, mast or fixed tower, swing ring, boom, and counterweight. Tower cranes provide many benefits to construction projects by saving time, being multipurpose, and allowing for optimum utilization of resources, though they also have some disadvantages like being cumbersome to erect and dismantle and requiring skilled operators.
Safety in construction
This document discusses safety in the construction industry in India. It begins with an introduction to construction and issues of safety due to extensive labor use. It then defines safety and discusses why safety is an issue due to frequent accidents resulting in losses. The document outlines common accident causes like human factors, faulty work practices, and structural failures. It also discusses effects of accidents like loss of life, time, and costs. The document concludes with recommendations to ensure safety such as the role of designers, safety programs, appointing safety officers, and using personal protective equipment.
SCAFFOLDING
This document provides information on scaffolding safety. It defines what a scaffold is and lists common hazards like collapse, falls, and electrocution. It also discusses assessing risks, controlling risks through means like fall protection, and planning scaffolding work. Different types of scaffolds are described, including tower, mobile, tube and coupler, frame, hung, suspended, trestle, and cantilever scaffolds. Load considerations, materials, and safe erection procedures are outlined.
Health and Safety in Construction PPT
The document discusses personal health and safety responsibilities in construction. It lists responsibilities such as working safely, wearing proper protective equipment like goggles and steel toe boots, keeping work areas tidy, and being respectful of others. It also discusses regulations, roles, and responsibilities related to health and safety, including common regulations, employer responsibilities, and employee responsibilities.
EPC Contracts
The document discusses Engineering, Procurement, and Construction (EPC) contracts. It defines EPC as a contract that includes engineering, procurement, and construction activities. It notes that an EPC contract can be for a full project scope, making it equivalent to a turnkey contract, or only part of a project scope. The document examines what types of work can be included in an EPC contract and provides several case studies analyzing whether hypothetical contract scenarios would qualify as EPC contracts. It also reviews common clauses that should be included in EPC contracts such as related to securities, time/delay, determination of contract, and arbitration.
Construction Safety Management
This document discusses construction safety management. It covers the roles and responsibilities of various parties in ensuring construction safety such as top management, site managers, supervisors, safety officers, and general employees. It also discusses approaches to improving safety through organizational, physical, and behavioral changes. Key aspects of safety management discussed include developing safety manuals, committees, training programs, inspections, investigations, and incentives.
Method statement of temporary office and fa
The document outlines plans for temporary site facilities for the Dasherkandi Sewage Treatment Plant Project. It details the scope of work, organization structure, construction methodology, safety plans, and site layout. Temporary facilities will include site offices, dormitories, workshops, warehouses, and batching plants. The project aims to treat wastewater from several areas of Dhaka to reduce pollution in the Balu River.
Use of bitumen in tank foundation and as a joint filling material
This document defines bitumen and describes its properties and composition. It is a viscous liquid or solid consisting mainly of hydrocarbons that is obtained through petroleum refining or found naturally. The document discusses how bitumen is used in construction applications like roads, waterproofing, and joint fillers. It also addresses the environmental and health impacts of bitumen production and alternatives to reduce pollution.
PPT OF LG
This document summarizes the components, erection procedures, and safety precautions for launching girders used in bridge construction. It describes the main components of launching girders including the main box girder, front support, middle support, and rear support. The erection process is outlined involving assembling the girder, erecting supports, lifting segments, and auto launching. Key safety measures are identified for erection activities and auto launching to control risks like falls, collisions, and structural collapse. A hazard identification and risk assessment is also conducted to rate risks and identify additional safety controls.
QUANTITY SURVEYING
The document provides an introduction to the role of quantity surveyors in construction projects. It discusses that quantity surveyors are responsible for financial aspects of construction and provide various services throughout a project, including preparing initial budgets and cost estimates, tender documents, valuations of work, and final accounts. It also describes the different stages of a project where quantity surveyors are involved, such as pre-tender, tender, and post-tender stages, and the tasks performed during each stage.
Tender
The document discusses the tender process, beginning with defining a tender as an invitation from an owner to contractors to execute work at a specified cost and time. It then outlines the different types of tenders such as single, limited, open, and global tenders. The purpose and issuing of tenders is also explained along with the typical elements included in tender request documents. Finally, the seven main steps in the tender process are provided, from determining the tender type to establishing and managing the resulting contracts.
Construction site safety
Construction site safety is important to prevent common accidents like falls, collisions, and injuries. Common risks include falling objects, excavation collapses, electrocutions, and falls from ladders or roofs. Proper protective equipment like hard hats, high-visibility vests, safety boots, and harnesses can help prevent injuries when working at heights or with heavy machinery. All workers must follow safety protocols to ensure their own protection and that of others on the jobsite.
MAINTENANCE AND REPAIR STRATEGIES
The document discusses maintenance of civil engineering structures. It defines key terms like repair, rehabilitation, and maintenance. Maintenance aims to prevent damage from natural causes and keep structures in good working condition. Various types of maintenance are described, including emergency, condition-based, and preventive maintenance. Factors that cause deterioration in structures are also explained, such as atmospheric agents like rain and wind, normal wear and tear, and structural failures. The roles of inspections, analysis, and appropriate actions in maintenance are outlined. Different material testing methods that can be used to assess structural damage are also summarized.
Pile foundations
Pile foundation is important for construction of foundation where bearing capacity of soil is poor. Pile foundation is use for distribution of uneven load of superstructure.There are so many type of pile are use for construction. Here i present some of pile with suitable condition for construction and methods for construction.
Thank you.
Building maintenance
The document discusses building maintenance from a civil engineer's perspective. It provides an overview of aspects engineers should consider at different stages, from design to planning maintenance. Key points include:
- Maintenance planning should start at the design stage to prevent defects and reduce long-term costs. Factors like material selection and accessibility for maintenance are important.
- Developing a maintenance plan and budget helps maintain asset value systematically rather than through ad-hoc repairs. Regular inspections and record-keeping are important.
- Building defects can arise from design failures, construction issues, or material problems. Understanding defect causes allows for better maintenance management.
Price variation in works contracts
The document discusses price variation in works contracts. Price variation accounts for increases or decreases in item costs between the tender submission date and work completion date. Only major cost components like labor, steel, cement, and fuel are considered for price variation calculations. Formulas use price indices on the last tender date and work date to calculate cost variations on components. It is important to ensure like materials from the same manufacturers and locations are used in price variation analyses. Price variation may be paid quarterly and is designed to avoid cost uncertainties for contractors during long contracts over 6 months.
Chapter_2-Procurement and Contract management.pptx
The document discusses procurement and contract management. It defines procurement as the purchase of goods, services, or works at the best price, delivery date, and legal terms through a competitive bidding process. Contract management involves contract planning, procurement management, and contract administration. It aims to ensure fair competition and fair distribution of obligations and rights among stakeholders. The document outlines different types of procurement and contract delivery systems including force account, design-bid-build, and design-build. It provides details on the processes, roles, advantages, and disadvantages of each type.
Scaffolding
The document provides information on scaffolding safety training conducted by Mr. V N Parbhu at EERC Theramx Ltd. on September 24-25, 2012. It defines scaffolding and describes the main types of tubular scaffolding. It outlines the various parts of tubular scaffolding such as standards, ledgers, transoms, and couplers. The document discusses requirements for guardrails, toeboards, and access ladders on scaffolds. It also covers inspection procedures and checklists for competent persons, as well as applicable regulations from the Building and Other Construction Workers Act and Factories Act.
Risk & Risk Management in Construction.ppt
The document discusses risk management in construction projects. It defines risk and outlines the various types of risks that can occur in construction, including physical, financial, economic, political, environmental, design, and construction-related risks. It then describes the key steps in the risk management process - risk identification, analysis, assessment, response, and monitoring. Common risk response methods like elimination, transfer, reduction, and retention are also explained. The document aims to provide an overview of risk management and the various risks that must be addressed to manage construction projects successfully.
Construction Material Management
This document discusses construction material management. It defines material management and outlines its aims and objectives, which include ensuring the right quality, quantity, timing, and cost of materials. The document describes various material types, the material management process, problems that can occur, and techniques for inventory control and quantitative analysis. It also discusses technologies like barcodes and RFID that can be used to improve material management. Overall, the document provides a comprehensive overview of construction material management.
Demolition of buildings
We know every structure is designed for a life period.
The existence of the structure after the service life period is very dangerous to its occupants and surrounding buildings .
The building act usually contains provisions that enable local authorities to control demolition works for the protection of public safety and to ensure adjoining premises and the site are made good on completion of the demolition.
Fire Safety in Smart Cities
Fire departments face new challenges in responding to fires in modern high-rise buildings and smart cities. Pyro-terrorism, where fires are intentionally set to harm others or advance political goals, adds complexity. Tall glass buildings may have poor ventilation, complicating smoke evacuation. Strict building codes are needed considering emergency access and materials. Fire departments must develop frameworks to assess pyro-terrorism risks and coordinate prevention efforts. Sophisticated arson intended to sabotage suppression systems and endanger lives requires new response strategies.
Detailed Project Report
Detailed project reports are documents created for planning, decision making, and project approval. They contain key project details to guide execution and control. There are different types created at various stages, including inception reports made early on with raw data and feasibility studies to support investment proposals. Inception reports provide initial ideas and seek input, while feasibility reports analyze surveys and define system objectives. Both include essential contents like project descriptions, costs, schedules, and conclusions. Detailed project reports ensure projects are properly defined and addressed to stakeholders' satisfaction.
Epc project interdepency and Work Flow- promo
Engineering, Procurement and Construction are highly correlated and set precedence against each other. They are very interdependent and these dependencies become increasingly critical as the phases are overlapped. In this module we share the interdependence of Engineering - Procurement and the influence in Construction. Here we touch a bit on work front monitoring and work face planning.
Construction safety management
The document discusses developing and implementing an effective construction safety program, including assigning responsibilities, identifying hazards, providing training, documenting safety rules, setting performance goals, and reviewing incidents to continually improve safety. It also covers establishing emergency response procedures and evaluating contractor safety plans and ongoing project safety.
Construction Project Management
Construction Project Management is an important subject to learn in Civil Engineering.
Significance • As construction involves various activities starting from the design and planning to project completion and quality check, there is a exorbitant need for Management of construction. • Construction Industry plays a crucial role in the economy and development of a nation.
4. Objectives To complete the project in specified time and with allocated budget. To Plan and schedule the work and distribute between various departments. Deployment of personnel in Different tasks. To achieve High quality workmanship. Creating an organisation that works as a team. Using the limited available resources and producing maximum output. Providing safe and satisfactory working conditions for all personnel and workers.
5. Functions: Planning & Scheduling Organizing Staffing Directing Controlling & Co-ordinating
6. Stages of construction Briefing Designing Tendering Construction Commissioning
7. 1) Briefing Stage • This stage consists of framework required for the construction work to take a shape from the ideology of client and feasibility of Project which involves architects, engineers and project manager.
Objectives Developing Alternatives Feasible Solution ? Evaluation of Alternatives Report & Recommendation Technical and non technical Investigations
8. 2) Designing or planning Stage Prepare construction schedule Prepare final cost estimate Prepare Working Drawings and specificati ons Prepare scheme and detailed designs Soil investigations, Topographic investigation, material supply and market surveys etc Carry out Technical Investigations Final adoption of the most suitable summary Finalize Project Summary
Alok tiwari main profile presentation
ALOK TIWARI
Contact: +919685449288, +91758 – 2403566 /
E-Mail: aloktiwari81@gmail.com,alok_tiwari_81@yahoo.com
Dear Sir/ Madam,
Please find attached resume for the position. I'm particularly interested in the Job opportunity, My overall experience strongly speaks about main profile - Design Engineering ( Electrical Design – Power Transformers) / Project Engineering & Management with exposure in preparation of technical designs for Power Transformers & related activities /Getting engaged in pre-sales cross functional activities related to product manufacturing and development process/Methods & Techniques.
I believe I meet all the essential criteria with great potential and enthusiasm for the position, roles & responsibilities at the work place offered in the organization, highlighting overall experience and demonstrated talent:
Played a key role in the Tasks assigned for Product & Process development /Innovation.
Instrumental in handling the assignments related to IS/ANSI/IEC standards/Pre-Sales cross functional activities & Project engineering/Techno-Commercial calculations.
Efficiently shouldered the responsibilities of the coordinator for ISO 14001-ISO 18001 EMS & OHSAS/Project engineering for Power Transformers & cross functional activities/Process functions & Methods.
A keen communicator with honed Interpersonal/Problem solving/Cross functional/ Analytical & Task handling abilities.
I am looking forward to take up roles in Technical & Project Engineering Management domain in an organization. The particular interest would be global assignments related to Project engineering & management/ Design Engineering & Analysis /Technical Assignments.
I am keen to join a potential employer due to its leading position in the industry, great organizational culture, spirit of innovation, professionalism as mentioned & highlighted that characterizes an organization and its employees. I am attracted to this role on account of the great organizational values as understood & will provide me an opportunity to bring forward my skills to get more horizons that i think organization offers.
I appreciate you are taking time to review my credentials , exposure & experience. Hence looking forward for a positive response.
Thank you.
Sincerely,
Alok Tiwari
Enclosure: 1) CV. 2) Profile presentation.
Ivan Voronov: Hardware Engineering & Industrial IoT
UA Online IT Outsourcing Forum
Website - https://liof.org/online
Youtube - https://www.youtube.com/startuplviv
FB - https://www.facebook.com/ukrof
More Related Content
What's hot
Method statement of temporary office and fa
The document outlines plans for temporary site facilities for the Dasherkandi Sewage Treatment Plant Project. It details the scope of work, organization structure, construction methodology, safety plans, and site layout. Temporary facilities will include site offices, dormitories, workshops, warehouses, and batching plants. The project aims to treat wastewater from several areas of Dhaka to reduce pollution in the Balu River.
Use of bitumen in tank foundation and as a joint filling material
This document defines bitumen and describes its properties and composition. It is a viscous liquid or solid consisting mainly of hydrocarbons that is obtained through petroleum refining or found naturally. The document discusses how bitumen is used in construction applications like roads, waterproofing, and joint fillers. It also addresses the environmental and health impacts of bitumen production and alternatives to reduce pollution.
PPT OF LG
This document summarizes the components, erection procedures, and safety precautions for launching girders used in bridge construction. It describes the main components of launching girders including the main box girder, front support, middle support, and rear support. The erection process is outlined involving assembling the girder, erecting supports, lifting segments, and auto launching. Key safety measures are identified for erection activities and auto launching to control risks like falls, collisions, and structural collapse. A hazard identification and risk assessment is also conducted to rate risks and identify additional safety controls.
QUANTITY SURVEYING
The document provides an introduction to the role of quantity surveyors in construction projects. It discusses that quantity surveyors are responsible for financial aspects of construction and provide various services throughout a project, including preparing initial budgets and cost estimates, tender documents, valuations of work, and final accounts. It also describes the different stages of a project where quantity surveyors are involved, such as pre-tender, tender, and post-tender stages, and the tasks performed during each stage.
Tender
The document discusses the tender process, beginning with defining a tender as an invitation from an owner to contractors to execute work at a specified cost and time. It then outlines the different types of tenders such as single, limited, open, and global tenders. The purpose and issuing of tenders is also explained along with the typical elements included in tender request documents. Finally, the seven main steps in the tender process are provided, from determining the tender type to establishing and managing the resulting contracts.
Construction site safety
Construction site safety is important to prevent common accidents like falls, collisions, and injuries. Common risks include falling objects, excavation collapses, electrocutions, and falls from ladders or roofs. Proper protective equipment like hard hats, high-visibility vests, safety boots, and harnesses can help prevent injuries when working at heights or with heavy machinery. All workers must follow safety protocols to ensure their own protection and that of others on the jobsite.
MAINTENANCE AND REPAIR STRATEGIES
The document discusses maintenance of civil engineering structures. It defines key terms like repair, rehabilitation, and maintenance. Maintenance aims to prevent damage from natural causes and keep structures in good working condition. Various types of maintenance are described, including emergency, condition-based, and preventive maintenance. Factors that cause deterioration in structures are also explained, such as atmospheric agents like rain and wind, normal wear and tear, and structural failures. The roles of inspections, analysis, and appropriate actions in maintenance are outlined. Different material testing methods that can be used to assess structural damage are also summarized.
Pile foundations
Pile foundation is important for construction of foundation where bearing capacity of soil is poor. Pile foundation is use for distribution of uneven load of superstructure.There are so many type of pile are use for construction. Here i present some of pile with suitable condition for construction and methods for construction.
Thank you.
Building maintenance
The document discusses building maintenance from a civil engineer's perspective. It provides an overview of aspects engineers should consider at different stages, from design to planning maintenance. Key points include:
- Maintenance planning should start at the design stage to prevent defects and reduce long-term costs. Factors like material selection and accessibility for maintenance are important.
- Developing a maintenance plan and budget helps maintain asset value systematically rather than through ad-hoc repairs. Regular inspections and record-keeping are important.
- Building defects can arise from design failures, construction issues, or material problems. Understanding defect causes allows for better maintenance management.
Price variation in works contracts
The document discusses price variation in works contracts. Price variation accounts for increases or decreases in item costs between the tender submission date and work completion date. Only major cost components like labor, steel, cement, and fuel are considered for price variation calculations. Formulas use price indices on the last tender date and work date to calculate cost variations on components. It is important to ensure like materials from the same manufacturers and locations are used in price variation analyses. Price variation may be paid quarterly and is designed to avoid cost uncertainties for contractors during long contracts over 6 months.
Chapter_2-Procurement and Contract management.pptx
The document discusses procurement and contract management. It defines procurement as the purchase of goods, services, or works at the best price, delivery date, and legal terms through a competitive bidding process. Contract management involves contract planning, procurement management, and contract administration. It aims to ensure fair competition and fair distribution of obligations and rights among stakeholders. The document outlines different types of procurement and contract delivery systems including force account, design-bid-build, and design-build. It provides details on the processes, roles, advantages, and disadvantages of each type.
Scaffolding
The document provides information on scaffolding safety training conducted by Mr. V N Parbhu at EERC Theramx Ltd. on September 24-25, 2012. It defines scaffolding and describes the main types of tubular scaffolding. It outlines the various parts of tubular scaffolding such as standards, ledgers, transoms, and couplers. The document discusses requirements for guardrails, toeboards, and access ladders on scaffolds. It also covers inspection procedures and checklists for competent persons, as well as applicable regulations from the Building and Other Construction Workers Act and Factories Act.
Risk & Risk Management in Construction.ppt
The document discusses risk management in construction projects. It defines risk and outlines the various types of risks that can occur in construction, including physical, financial, economic, political, environmental, design, and construction-related risks. It then describes the key steps in the risk management process - risk identification, analysis, assessment, response, and monitoring. Common risk response methods like elimination, transfer, reduction, and retention are also explained. The document aims to provide an overview of risk management and the various risks that must be addressed to manage construction projects successfully.
Construction Material Management
This document discusses construction material management. It defines material management and outlines its aims and objectives, which include ensuring the right quality, quantity, timing, and cost of materials. The document describes various material types, the material management process, problems that can occur, and techniques for inventory control and quantitative analysis. It also discusses technologies like barcodes and RFID that can be used to improve material management. Overall, the document provides a comprehensive overview of construction material management.
Demolition of buildings
We know every structure is designed for a life period.
The existence of the structure after the service life period is very dangerous to its occupants and surrounding buildings .
The building act usually contains provisions that enable local authorities to control demolition works for the protection of public safety and to ensure adjoining premises and the site are made good on completion of the demolition.
Fire Safety in Smart Cities
Fire departments face new challenges in responding to fires in modern high-rise buildings and smart cities. Pyro-terrorism, where fires are intentionally set to harm others or advance political goals, adds complexity. Tall glass buildings may have poor ventilation, complicating smoke evacuation. Strict building codes are needed considering emergency access and materials. Fire departments must develop frameworks to assess pyro-terrorism risks and coordinate prevention efforts. Sophisticated arson intended to sabotage suppression systems and endanger lives requires new response strategies.
Detailed Project Report
Detailed project reports are documents created for planning, decision making, and project approval. They contain key project details to guide execution and control. There are different types created at various stages, including inception reports made early on with raw data and feasibility studies to support investment proposals. Inception reports provide initial ideas and seek input, while feasibility reports analyze surveys and define system objectives. Both include essential contents like project descriptions, costs, schedules, and conclusions. Detailed project reports ensure projects are properly defined and addressed to stakeholders' satisfaction.
Epc project interdepency and Work Flow- promo
Engineering, Procurement and Construction are highly correlated and set precedence against each other. They are very interdependent and these dependencies become increasingly critical as the phases are overlapped. In this module we share the interdependence of Engineering - Procurement and the influence in Construction. Here we touch a bit on work front monitoring and work face planning.
Construction safety management
The document discusses developing and implementing an effective construction safety program, including assigning responsibilities, identifying hazards, providing training, documenting safety rules, setting performance goals, and reviewing incidents to continually improve safety. It also covers establishing emergency response procedures and evaluating contractor safety plans and ongoing project safety.
Construction Project Management
Construction Project Management is an important subject to learn in Civil Engineering.
Significance • As construction involves various activities starting from the design and planning to project completion and quality check, there is a exorbitant need for Management of construction. • Construction Industry plays a crucial role in the economy and development of a nation.
4. Objectives To complete the project in specified time and with allocated budget. To Plan and schedule the work and distribute between various departments. Deployment of personnel in Different tasks. To achieve High quality workmanship. Creating an organisation that works as a team. Using the limited available resources and producing maximum output. Providing safe and satisfactory working conditions for all personnel and workers.
5. Functions: Planning & Scheduling Organizing Staffing Directing Controlling & Co-ordinating
6. Stages of construction Briefing Designing Tendering Construction Commissioning
7. 1) Briefing Stage • This stage consists of framework required for the construction work to take a shape from the ideology of client and feasibility of Project which involves architects, engineers and project manager.
Objectives Developing Alternatives Feasible Solution ? Evaluation of Alternatives Report & Recommendation Technical and non technical Investigations
8. 2) Designing or planning Stage Prepare construction schedule Prepare final cost estimate Prepare Working Drawings and specificati ons Prepare scheme and detailed designs Soil investigations, Topographic investigation, material supply and market surveys etc Carry out Technical Investigations Final adoption of the most suitable summary Finalize Project Summary
What's hot (20)
Use of bitumen in tank foundation and as a joint filling material
Use of bitumen in tank foundation and as a joint filling material
Chapter_2-Procurement and Contract management.pptx
Chapter_2-Procurement and Contract management.pptx
Similar to Design Sequence of Works In Design & Build Projects
Alok tiwari main profile presentation
ALOK TIWARI
Contact: +919685449288, +91758 – 2403566 /
E-Mail: aloktiwari81@gmail.com,alok_tiwari_81@yahoo.com
Dear Sir/ Madam,
Please find attached resume for the position. I'm particularly interested in the Job opportunity, My overall experience strongly speaks about main profile - Design Engineering ( Electrical Design – Power Transformers) / Project Engineering & Management with exposure in preparation of technical designs for Power Transformers & related activities /Getting engaged in pre-sales cross functional activities related to product manufacturing and development process/Methods & Techniques.
I believe I meet all the essential criteria with great potential and enthusiasm for the position, roles & responsibilities at the work place offered in the organization, highlighting overall experience and demonstrated talent:
Played a key role in the Tasks assigned for Product & Process development /Innovation.
Instrumental in handling the assignments related to IS/ANSI/IEC standards/Pre-Sales cross functional activities & Project engineering/Techno-Commercial calculations.
Efficiently shouldered the responsibilities of the coordinator for ISO 14001-ISO 18001 EMS & OHSAS/Project engineering for Power Transformers & cross functional activities/Process functions & Methods.
A keen communicator with honed Interpersonal/Problem solving/Cross functional/ Analytical & Task handling abilities.
I am looking forward to take up roles in Technical & Project Engineering Management domain in an organization. The particular interest would be global assignments related to Project engineering & management/ Design Engineering & Analysis /Technical Assignments.
I am keen to join a potential employer due to its leading position in the industry, great organizational culture, spirit of innovation, professionalism as mentioned & highlighted that characterizes an organization and its employees. I am attracted to this role on account of the great organizational values as understood & will provide me an opportunity to bring forward my skills to get more horizons that i think organization offers.
I appreciate you are taking time to review my credentials , exposure & experience. Hence looking forward for a positive response.
Thank you.
Sincerely,
Alok Tiwari
Enclosure: 1) CV. 2) Profile presentation.
Ivan Voronov: Hardware Engineering & Industrial IoT
UA Online IT Outsourcing Forum
Website - https://liof.org/online
Youtube - https://www.youtube.com/startuplviv
FB - https://www.facebook.com/ukrof
resume-ehlibongco_2015e
Efrain H. Libongco is a senior mechanical engineer with over 20 years of experience in oil & gas, mining, military, industrial, and commercial projects. He has worked on projects in Canada, Japan, and the Philippines. His experience includes designing HVAC, plumbing, and fire protection systems and providing construction support. He is proficient in AutoCAD, Microstation, and design programs for mechanical systems.
FNBE 0814 Introduction To Construction Industry Project 1
An architecture presentation was given by 6 students and their tutor. It defined an architect as someone who designs buildings and supervises construction. It described the general roles of an architect in transforming visions into reality through functional and safe designs that meet client needs. The presentation outlined the typical project phases architects go through including consultation, preliminary design, developing schematics and final construction drawings, overseeing construction, and handing over the completed building. It also discussed how architects collaborate with other professionals like engineers and contractors.
MPK - Resume
Kariappa M. P. is an accomplished MEP engineer with over 10 years of experience managing MEP projects in India and the UAE. He has extensive experience in design, planning, execution, and commissioning of HVAC, fire protection, and electrical systems for high-rise buildings and electrical substations. Some of the major projects he has managed include power plants, grid stations, industrial zones, and commercial towers. He is certified as a competent professional for HVAC and fire protection systems by various utility companies in Abu Dhabi.
Electrical Designer / BIM Modeler
Degree in Electrical Engineering and communication professional offering 3+ years of successful career
Project Induction Program 11.02.2016
This document provides an overview of a project induction program for new team members on a quality training project. It includes an agenda with sections on introductions of parties involved, contract details, stakeholders and management structure, site teams, responsibilities, project scope of work, standards, project details across various disciplines, quantities, submittals, audits and more. The project involves upgrading a road including structures, utilities works, and landscaping.
Oberoi Hotel
This document provides an organizational structure and project plan for the construction of the Oberoi Hotel in Abu Dhabi. It outlines the responsibilities of different project leaders and areas. It also describes the construction methodology and sequencing over time, including plans for the structure, formwork, concrete placement, pre-cast elements, and edge protection. Key milestones include starting piling in August 2008 and completing the project in February 2011.
Simon Britton CV linkedin
This document provides a detailed resume for Simon Britton summarizing his 14 years of experience in electrical/electronic design and manufacturing. He has worked as a Senior Electronics PCB Designer at Intelligent Energy Ltd since 2015 where he is responsible for designing circuit boards for hydrogen generators. Prior to this, he held roles as a Senior Development Technician and Technician also focusing on printed circuit board design. He has a strong background in schematic design, PCB layout, manufacturing processes, and quality inspection standards.
hamed_barakat_CV_New
Hammed Barakat Ibrahim El Awady is a 46-year old Egyptian electrical engineer with over 25 years of experience in design, supervision, and maintenance of infrastructure projects in Egypt, KSA, and Qatar. He has worked on a variety of projects including power stations, hospitals, cities, and irrigation networks. Currently he is a lead electrical engineer at Al-Joaib Consulting Engineering Office in Dammam, KSA where he is responsible for design review and ensuring designs meet codes and regulations.
Impact solutions 2015
Dear: gentlemen
This one of the good engineering company I did some work with them and they done nice and good engineering packages possibly you need to consider them for your work.
MRHCV-short.DOC
Mark Hobday established Critec Consult in 2001 as an independent security consulting firm. With over 28 years of experience, he specializes in the design, specification, and project management of integrated security systems. Notable past projects include CCTV system upgrades for 14 UK shopping malls, life safety CCTV systems for 5 UK police stations, and security upgrades for multiple UK nuclear power stations.
CV - Tarun (Electrical Engineer)
Tarun Kumar has 7 years of experience as an electrical engineer working on oil and gas and commercial building projects in Kuwait. He holds a B-Tech in electronic and communications engineering and is currently working as an electrical engineer for Samsung SDS Ltd on an integrated security systems project for Kuwait Oil Company facilities. Prior to his current role, Tarun worked as a junior engineer and project engineer in India on various construction and maintenance projects.
PPM5D - The BIM Integrated Project Delivery Specialists
This presentation demonstrates PPM\'s ability to deliver construction projects in BIM on and off site.
Bassam Shamkhi - UAE
Bassam Shamkhi has over 20 years of experience as a mechanical engineer and project leader. He has a Master's degree in Mechanical Engineering from the Technical University of Liberec in the Czech Republic. His experience includes designing equipment for the mining, nuclear, and manufacturing industries in Canada and Sweden. He has strong skills in 3D modeling, drafting, systems design, and project management. Currently, he works in his family's jewelry business in Dubai while seeking new engineering opportunities.
EDUARDO H. PARE CV - CIRCA - 04.07.2021
EDUARDO H. PARE CV - CIRCA - 04.07.2021
STRUCTURAL ENGINEER - EPCC, EPC, PMC
DESIGNS & CONSTRUCTIONS
amer-cv
Amer Ali Abdullah is an Iraqi civil engineer seeking a position that allows him to utilize his skills in construction and structural design. He has a bachelor's degree in civil engineering and over 15 years of experience in roles such as design coordinator, quality control engineer, structural design engineer, and instructor. His skills include structural analysis software, AutoCAD, and speaking Arabic, English, and Turkish. He is a member of the American Concrete Institute and American Society of Civil Engineers.
C. Main CV
This document is a one page summary CV for Cameron Main, a Trainee Lighting Technician. It outlines his experience using AutoCAD and lighting design software to produce designs that comply with industry standards. It also lists some of his recent projects assisting engineers with lighting designs for infrastructure and provides details of his qualifications and skills including experience with AutoCAD, Lighting Reality, ProjectWise, and Amtech Pro-design software.
Sustainable Architecture: Design Green with the Client in Mind.pdf
This document outlines Pedro Clarke's presentation on sustainable architecture. It discusses:
1. Using a passive design approach that learns from vernacular architecture to control solar gain through materials, daylighting, and considers embodied carbon.
2. Integrating active technologies like HVAC systems in a way that maximizes their effectiveness while minimizing energy usage.
3. Taking a holistic approach to sustainability that considers the entire building lifecycle from design through use, prioritizing high performance, flexibility, and minimal environmental impact.
CURRICULUM VITAE-1 (2)
The document is a cover letter and resume submitted by Puneet Dogra for a position as a Mechanical Engineer. In the cover letter, Puneet highlights his 11 years of experience in mechanical engineering, including currently working as a Lead Project Field Engineer in Oman. He also requests an opportunity for an interview. Puneet's resume then details his academic and professional qualifications, including designing HVAC systems and managing projects in Oman and India over the past 11 years.
Similar to Design Sequence of Works In Design & Build Projects (20)
Ivan Voronov: Hardware Engineering & Industrial IoT
Ivan Voronov: Hardware Engineering & Industrial IoT
FNBE 0814 Introduction To Construction Industry Project 1
FNBE 0814 Introduction To Construction Industry Project 1
PPM5D - The BIM Integrated Project Delivery Specialists
PPM5D - The BIM Integrated Project Delivery Specialists
Sustainable Architecture: Design Green with the Client in Mind.pdf
Sustainable Architecture: Design Green with the Client in Mind.pdf
Recently uploaded
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Recently uploaded (20)
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Design Sequence of Works In Design & Build Projects
- 1. Client/Consultant Review & Approval Submission of Design Concept Validation Reports 1‐ Structural Reports. 2‐Architectural Reports. 3‐MEP Reports. 4‐Electrical / ICT & Security Reports. 5‐Interior Finishing's Reports. 6‐Signage & Way Finding Reports. 7‐Audio Visual Reports. 8‐Landscape Reports. 9‐FF&E Reports. 10‐Infrastructure Reports. 11‐Fire & Life Safety. Consultant Review & Approval Submission of Interim Schematic Design 1‐ Structural Design. 2‐Architectural Design. 3‐MEP Design. 4‐Electrical / ICT & Security Design. 5‐Interior Finishing's Design. 6‐Signage & Way Finding Design. 7‐Audio Visual Design. 8‐Landscape Design. 9‐FF&E Design. 10‐Infrastructure Design. 11‐Fire & Life Safety Design. Approved Submission of Final Schematic Design Consultant Review & Approval 1‐ Structural Design. 2‐Architectural Design. 3‐MEP Design. 4‐Electrical / ICT & Security Design. 5‐Interior Finishing's Design. 6‐Signage & Way Finding Design. 7‐Audio Visual Design. 8‐Landscape Design. 9‐FF&E Design. 10‐Infrastructure Design. 11‐Fire & Life Safety Design. Consultant Review & Approval Submission of Interim Detailed Design 1‐ Structural Design. 2‐Architectural Design. 3‐MEP Design. 4‐Electrical / ICT & Security Design. 5‐Interior Finishing's Design. 6‐Signage & Way Finding Design. 7‐Audio Visual Design. 8‐Landscape Design. 9‐FF&E Design. 10‐Infrastructure Design. 11‐Fire & Life Safety Design. Consultant Review & Approval Submission of Final Detailed Design 1‐ Structural Design. 2‐Architectural Design. 3‐MEP Design. 4‐Electrical / ICT & Security Design. 5‐Interior Finishing's Design. 6‐Signage & Way Finding Design. 7‐Audio Visual Design. 8‐Landscape Design. 9‐FF&E Design. 10‐Infrastructure Design. 11‐Fire & Life Safety Design. Consultant Review & Approval Submission of IFC Drawings 1‐ Structural IFC. 2‐Architectural IFC. 3‐MEP IFC. 4‐Electrical / ICT & Security IFC. 5‐Interior Finishing's IFC. 6‐Signage & Way Finding IFC. 7‐Audio Visual IFC. 8‐Landscape IFC. 9‐FF&E IFC. 10‐Infrastructure IFC. 11‐Fire & Life Safety IFC. Consultant Review & Approval Submission / Approvals of Shop Drawings Prequalification Submission/ Approvals for Design Consultant/Integrator Construction / Authorities Approvals Phase Not Approved DESIGN SEQUENCE OF WORKS IN DESIGN AND BUILD PROJECTS Muhammad Reyad El‐Chammakh https://www.linkedin.com/in/muhammadchammakh/