Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
FTIR, Electrical and SHG Studies of Single Crystals of KDP Doped With Phenyla...iosrjce
IOSR Journal of Applied Physics (IOSR-JAP) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of physics and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in applied physics. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Growth, structural and optical studies of pure and kbr doped adp crystalseSAT Journals
Abstract Pure and KBr doped crystals of ADP were grown by slow evaporation technique from the supersaturated solution of ADP at room temperature. The tetragonal structure of the grown crystals was observed by powder X-ray diffraction analysis. FTIR spectra revealed the presence of functional groups present in the grown crystals. The UV-Vis spectral analysis shows high transparency in the entire visible region. The band gap value of the pure ADP crystal was found assuming indirect transition. Key Words: ADP, Powder XRD, FTIR, Band gap
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Crystal Growth and Studies of Dihydrogen Phosphates of Potassium and Ammonium...IJERA Editor
A nonlinear optical (NLO) material Potassium dihydrogen phosphates (KDP) and Ammonium dihydrogen
phosphates (ADP) are grown by slow evaporation solution growth technique. The FTIR studies confirm the
presence of the functional group in the grown crystal. The optical transmittance studies show that the crystal has
transparence in the entire visible and IR region. The thermal stability of the materials was assessed by TG/DTA
analysis. The mechanical stability of the grown crystals was analyzed by Vicker’s microhardness test. The
dielectric behavior of the crystals was tested by dielectric analysis. The second harmonic generation (SHG) of
KDP is confirmed by Kurtz and Perry powder technique using Nd: YAG laser.
Optical Properties of PVA:CdCl2.H2O Polymer ElectrolytesIOSR Journals
Polymer electrolytes based on Polyvinyl alcohol – Cadmium Chloride were prepared by solution cast
technique. Results of optical absorption, transmission spectra, refractive index, optical band gaps, optical
conductance, single oscillator energy, dispersion energy, real and imaginary parts of dielectric constants
studies are presented. The optical properties were obtained using UV-VIS Double Beam Spectrophotometer in
the wavelength range (190-1100) nm. The optical transmittance at wavelength ≈ 190nm for pure PVA was
nearly at 78%, while it was 50% for all doped samples. The optical transmittance was increased with increasing
wavelength up to 98% for all films beyond ≈240nm. The calculated energy band gap changes from 6.42eV (pure
PVA) to 5.80eV (PVA-20%CdCl2.H2O). The optical conductance and band-gap indicated that the films are
almost transmitting within the visible range. The single oscillator expression has been used to obtain the
information about disorder degree. The real and imaginary parts of dielectric constant of the doped films
increases with increasing CdCl2.H2O concentration, and it shows decreases abruptly in the wavelength (200-
220) nm, and finally becomes constant with increase in photon energy.
FTIR, Electrical and SHG Studies of Single Crystals of KDP Doped With Phenyla...iosrjce
IOSR Journal of Applied Physics (IOSR-JAP) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of physics and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in applied physics. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Growth, structural and optical studies of pure and kbr doped adp crystalseSAT Journals
Abstract Pure and KBr doped crystals of ADP were grown by slow evaporation technique from the supersaturated solution of ADP at room temperature. The tetragonal structure of the grown crystals was observed by powder X-ray diffraction analysis. FTIR spectra revealed the presence of functional groups present in the grown crystals. The UV-Vis spectral analysis shows high transparency in the entire visible region. The band gap value of the pure ADP crystal was found assuming indirect transition. Key Words: ADP, Powder XRD, FTIR, Band gap
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Crystal Growth and Studies of Dihydrogen Phosphates of Potassium and Ammonium...IJERA Editor
A nonlinear optical (NLO) material Potassium dihydrogen phosphates (KDP) and Ammonium dihydrogen
phosphates (ADP) are grown by slow evaporation solution growth technique. The FTIR studies confirm the
presence of the functional group in the grown crystal. The optical transmittance studies show that the crystal has
transparence in the entire visible and IR region. The thermal stability of the materials was assessed by TG/DTA
analysis. The mechanical stability of the grown crystals was analyzed by Vicker’s microhardness test. The
dielectric behavior of the crystals was tested by dielectric analysis. The second harmonic generation (SHG) of
KDP is confirmed by Kurtz and Perry powder technique using Nd: YAG laser.
Optical Properties of PVA:CdCl2.H2O Polymer ElectrolytesIOSR Journals
Polymer electrolytes based on Polyvinyl alcohol – Cadmium Chloride were prepared by solution cast
technique. Results of optical absorption, transmission spectra, refractive index, optical band gaps, optical
conductance, single oscillator energy, dispersion energy, real and imaginary parts of dielectric constants
studies are presented. The optical properties were obtained using UV-VIS Double Beam Spectrophotometer in
the wavelength range (190-1100) nm. The optical transmittance at wavelength ≈ 190nm for pure PVA was
nearly at 78%, while it was 50% for all doped samples. The optical transmittance was increased with increasing
wavelength up to 98% for all films beyond ≈240nm. The calculated energy band gap changes from 6.42eV (pure
PVA) to 5.80eV (PVA-20%CdCl2.H2O). The optical conductance and band-gap indicated that the films are
almost transmitting within the visible range. The single oscillator expression has been used to obtain the
information about disorder degree. The real and imaginary parts of dielectric constant of the doped films
increases with increasing CdCl2.H2O concentration, and it shows decreases abruptly in the wavelength (200-
220) nm, and finally becomes constant with increase in photon energy.
Consistently High Voc Values in p-i-n Type Perovskite Solar Cells Using Ni3+-...Pawan Kumar
Leading edge p-i-n type halide perovskite solar cells (PSCs) severely underperform n-i-p PSCs. p-i-n type PSCs that use PEDOT:PSS hole transport layers (HTLs) struggle to generate open-circuit photovoltage values higher than 1 V. NiO HTLs have shown greater promise in achieving high Voc values albeit inconsistently. In this report, a NiO nanomesh with Ni3+ defect grown by the hydrothermal method was used to obtain PSCs with Voc values that consistently exceeded 1.10 V (champion Voc = 1.14 V). A champion device photoconversion efficiency of 17.75% was observed. Density functional theory modeling was used to understand the interfacial properties of the NiO/perovskite interface. The PCE of PSCs constructed using the Ni3+-doped NiO nanomesh HTL was ∼34% higher than that of conventional compact NiO-based perovskite solar cells. A suite of characterization techniques such as transmission electron microscopy, field emission scanning electron microscopy, intensity-modulated photocurrent spectroscopy, intensity-modulated photovoltage spectroscopy, time-resolved photoluminescence, steady-state photoluminescence, and Kelvin probe force microscopy provided evidence of better film quality, enhanced charge transfer, and suppressed charge recombination in PSCs based on hydrothermally grown NiO nanostructures.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Images and data in the presentation are subject to copyright. Please contact redhwanm(at)mcmaster(dot)ca for permission if you want to use any of its contents.
IOSR Journal of Applied Physics (IOSR-JAP) is an open access international journal that provides rapid publication (within a month) of articles in all areas of physics and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in applied physics. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Vapor Deposition of Semiconducting Phosphorus Allotropes into TiO2 Nanotube A...Pawan Kumar
Recent evidence of exponential environmental degradation will demand a drastic shift in research and development toward exploiting alternative energy resources such as solar energy. Here, we report the successful low-cost and easily accessible synthesis of hybrid semiconductor@TiO2 nanotube photocatalysts. In order to realize its maximum potential in harvesting photons in the visible-light range, TiO2 nanotubes have been loaded with earth-abundant, low-band-gap fibrous red and black phosphorus (P). Scanning electron microscopy– and scanning transmission electron microscopy–energy-dispersive X-ray spectroscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron microscopy, and UV–vis measurements have been performed, substantiating the deposition of fibrous red and black P on top and inside the cavities of 100-μm-long electrochemically fabricated nanotubes. The nanotubular morphology of titania and a vapor-transport technique are utilized to form heterojunctions of P and TiO2. Compared to pristine anatase 3.2 eV TiO2 nanotubes, the creation of heterojunctions in the hybrid material resulted in 1.5–2.1 eV photoelectrocatalysts. An enhanced photoelectrochemical water-splitting performance under visible light compared with the individual components resulted for the P@TiO2 hybrids. This feature is due to synergistically improved charge separation in the heterojunction and more effective visible-light absorption. The electronic band structure and charge-carrier dynamics are investigated in detail using ultraviolet photoelectron spectroscopy and Kelvin probe force microscopy to elucidate the charge-separation mechanism. A Fermi-level alignment in P@TiO2 heterojunctions leads to a more reductive flat-band potential and a deeper valence band compared to pristine P and thus facilitates a better water-splitting performance. Our results demonstrate effective conversion efficiencies for the nanostructured hybrids, which may enable future applications in optoelectronic applications such as photodetectors, photovoltaics, photoelectrochemical catalysts, and sensors.
Noble Metal Free, Visible Light Driven Photocatalysis Using TiO2 Nanotube Arr...Pawan Kumar
Bulk g-C3N4 is an earth-abundant, easily synthesizable, and exceptionally stable photocatalyst with an electronic bandgap of 2.7 eV. Herein, the concepts of P-doping and size quantization are combined to synthesize highly fluorescent P-doped carbon nitride quantum dots (CNPQDs) with a bandgap of 2.1 eV. CNPQDs are hosted on anatase-phase and rutile-phase TiO2 nanotube array scaffolds, and examined as photoanodes for sunlight-driven water-splitting and as photocatalysts for surface catalytic reactions. Square-shaped rutile phase TiO2 nanotube arrays (STNAs) decorated with CNPQDs (CNPQD-STNA) generate 2.54 mA cm−2 photocurrent under AM1.5 G simulated sunlight. A champion hydrogen evolution rate of 22 µmol h−1 corresponds to a Faradaic efficiency of 93.2%. In conjunction with Ag nanoparticles (NPs), the CNPQD-STNA hybrid is also found to be an excellent plexcitonic photocatalyst for the visible light-driven transformation of 4-nitrobenzenethiol (4-NBT) to dimercaptoazobenzene (DMAB), producing reaction completion at a laser power of 1 mW (532 nm) while Ag NP/TNA and Ag NP/STNA photocatalysts cannot complete this transformation even at 10 mW laser power. The results point the way forward for photochemically robust, noble metal free, visible light harvesting photoacatalysts based on nanostructured heterojunctions of graphenic frameworks with TiO2.
Mixed-Valence Single-Atom Catalyst Derived from Functionalized GraphenePawan Kumar
Single-atom catalysts (SACs) aim at bridging the gap between homogeneous and heterogeneous catalysis. The challenge is the development of materials with ligands enabling coordination of metal atoms in different valence states, and preventing leaching or nanoparticle formation. Graphene functionalized with nitrile groups (cyanographene) is herein employed for the robust coordination of Cu(II) ions, which are partially reduced to Cu(I) due to graphene-induced charge transfer. Inspired by nature's selection of Cu(I) in enzymes for oxygen activation, this 2D mixed-valence SAC performs flawlessly in two O2-mediated reactions: the oxidative coupling of amines and the oxidation of benzylic CH bonds toward high-value pharmaceutical synthons. High conversions (up to 98%), selectivities (up to 99%), and recyclability are attained with very low metal loadings in the reaction. The synergistic effect of Cu(II) and Cu(I) is the essential part in the reaction mechanism. The developed strategy opens the door to a broad portfolio of other SACs via their coordination to various functional groups of graphene, as demonstrated by successful entrapment of FeIII/FeII single atoms to carboxy-graphene.
C3N5: A Low Bandgap Semiconductor Containing an Azo-linked Carbon Nitride Fra...Pawan Kumar
Modification of carbon nitride based polymeric 2D materials for tailoring their optical, electronic and chemical properties for various applications has gained significant interest. The present report demonstrates the synthesis of a novel modified carbon nitride framework with a remarkable 3:5 C:N stoichiometry (C3N5) and an electronic bandgap of 1.76 eV, by thermal deammoniation of the melem hydrazine precursor. Characterization revealed that in the C3N5 polymer, two s-heptazine units are bridged together with azo linkage, which constitutes an entirely new and different bonding fashion from g-C3N4 where three heptazine units are linked together with tertiary nitrogen. Extended conjugation due to overlap of azo nitrogens and increased electron density on heptazine nucleus due to the aromatic π network of heptazine units lead to an upward shift of the valence band maximum resulting in bandgap reduction down to 1.76 eV. XRD, He-ion imaging, HR-TEM, EELS, PL, fluorescence lifetime imaging, Raman, FTIR, TGA, KPFM, XPS, NMR and EPR clearly show that the properties of C3N5 are distinct from pristine carbon nitride (g-C3N4). When used as an electron transport layer (ETL) in MAPbBr3 based halide perovskite solar cells, C3N5 outperformed g-C3N4, in particular generating an open circuit photovoltage as high as 1.3 V, while C3N5 blended with MAxFA1–xPb(I0.85Br0.15)3 perovskite active layer achieved a photoconversion efficiency (PCE) up to 16.7%. C3N5 was also shown to be an effective visible light sensitizer for TiO2 photoanodes in photoelectrochemical water splitting. Because of its electron-rich character, the C3N5 material displayed instantaneous adsorption of methylene blue from aqueous solution reaching complete equilibrium within 10 min, which is significantly faster than pristine g-C3N4 and other carbon based materials. C3N5 coupled with plasmonic silver nanocubes promotes plasmon-exciton coinduced surface catalytic reactions reaching completion at much low laser intensity (1.0 mW) than g-C3N4, which showed sluggish performance even at high laser power (10.0 mW). The relatively narrow bandgap and 2D structure of C3N5 make it an interesting air-stable and temperature-resistant semiconductor for optoelectronic applications while its electron-rich character and intra sheet cavity make it an attractive supramolecular adsorbent for environmental applications.
Vapor growth of binary and ternary phosphorus-based semiconductors into TiO2 ...Pawan Kumar
We report successful synthesis of low band gap inorganic polyphosphide and TiO2 heterostructures with the aid of short-way transport reactions. Binary and ternary polyphosphides (NaP7, SnIP, and (CuI)3P12) were successfully reacted and deposited into electrochemically fabricated TiO2 nanotubes. Employing vapor phase reaction deposition, the cavities of 100 μm long TiO2 nanotubes were infiltrated; approximately 50% of the nanotube arrays were estimated to be infiltrated in the case of NaP7. Intensive characterization of the hybrid materials with techniques including SEM, FIB, HR-TEM, Raman spectroscopy, XRD, and XPS proved the successful vapor phase deposition and synthesis of the substances on and inside the nanotubes. The polyphosphide@TiO2 hybrids exhibited superior water splitting performance compared to pristine materials and were found to be more active at higher wavelengths. SnIP@TiO2 emerged to be the most active among the polyphosphide@TiO2 materials. The improved photocatalytic performance might be due to Fermi level re-alignment and a lower charge transfer resistance which facilitated better charge separation from inorganic phosphides to TiO2.
Asymmetric Multipole Plasmon-Mediated Catalysis Shifts the Product Selectivit...Pawan Kumar
Cu/TiO2 is a well-known photocatalyst for the photocatalytic transformation of CO2 into methane. The formation of C2+ products such as ethane and ethanol rather than methane is more interesting due to their higher energy density and economic value, but the formation of C–C bonds is currently a major challenge in CO2 photoreduction. In this context, we report the dominant formation of a C2 product, namely, ethane, from the gas-phase photoreduction of CO2 using TiO2 nanotube arrays (TNTAs) decorated with large-sized (80–200 nm) Ag and Cu nanoparticles without the use of a sacrificial agent or hole scavenger. Isotope-labeled mass spectrometry was used to verify the origin and identity of the reaction products. Under 2 h AM1.5G 1-sun illumination, the total rate of hydrocarbon production (methane + ethane) was highest for AgCu-TNTA with a total CxH2x+2 rate of 23.88 μmol g–1 h–1. Under identical conditions, the CxH2x+2 production rates for Ag-TNTA and Cu-TNTA were 6.54 and 1.39 μmol g–1 h–1, respectively. The ethane selectivity was the highest for AgCu-TNTA with 60.7%, while the ethane selectivity was found to be 15.9 and 10% for the Ag-TNTA and Cu-TNTA, respectively. Adjacent adsorption sites in our photocatalyst develop an asymmetric charge distribution due to quadrupole resonances in large metal nanoparticles and multipole resonances in Ag–Cu heterodimers. Such an asymmetric charge distribution decreases adsorbate–adsorbate repulsion and facilitates C–C coupling of reaction intermediates, which otherwise occurs poorly in TNTAs decorated with small metal nanoparticles.
Metal ion burst: Examining metal ion diffusion using ultrafast fluorescence s...Chelsey Crosse
Presentation to accompany my report for my oral examination. Details background of fluorescence upconversion techniques, development of measurement systems for release of a metal cation and minimization of diffusion distribution in solutions.
Phase behavior and characterization of PECs AIChE 2014 David Scheuing
Presented Nov. 2014 at AIChE meeting. Examines the use of polyelectrolyte complexes for surface modification in consumer products such as cleaners. Summarizes synthesis and characterization of stable complexes in solution via light scattering. Illustrates characterization of adsorbed layers of complexes on germanium and silica surfaces via Fourier Transform Infrared spectroscopy and gravimetry via a quartz crystal microbalance.
Photocatalytic Mechanism Control and Study of Carrier Dynamics in CdS@C3N5 Co...Pawan Kumar
We present a potential solution to the problem of extraction of photogenerated holes from CdS nanocrystals and nanowires. The nanosheet form of C3N5 is a low-band-gap (Eg = 2.03 eV), azo-linked graphenic carbon nitride framework formed by the polymerization of melem hydrazine (MHP). C3N5 nanosheets were either wrapped around CdS nanorods (NRs) following the synthesis of pristine chalcogenide or intercalated among them by an in situ synthesis protocol to form two kinds of heterostructures, CdS-MHP and CdS-MHPINS, respectively. CdS-MHP improved the photocatalytic degradation rate of 4-nitrophenol by nearly an order of magnitude in comparison to bare CdS NRs. CdS-MHP also enhanced the sunlight-driven photocatalytic activity of bare CdS NWs for the decolorization of rhodamine B (RhB) by a remarkable 300% through the improved extraction and utilization of photogenerated holes due to surface passivation. More interestingly, CdS-MHP provided reaction pathway control over RhB degradation. In the absence of scavengers, CdS-MHP degraded RhB through the N-deethylation pathway. When either hole scavenger or electron scavenger was added to the RhB solution, the photocatalytic activity of CdS-MHP remained mostly unchanged, while the degradation mechanism shifted to the chromophore cleavage (cycloreversion) pathway. We investigated the optoelectronic properties of CdS-C3N5 heterojunctions using density functional theory (DFT) simulations, finite difference time domain (FDTD) simulations, time-resolved terahertz spectroscopy (TRTS), and photoconductivity measurements. TRTS indicated high carrier mobilities >450 cm2 V–1 s–1 and carrier relaxation times >60 ps for CdS-MHP, while CdS-MHPINS exhibited much lower mobilities <150 cm2 V–1 s–1 and short carrier relaxation times <20 ps. Hysteresis in the photoconductive J–V characteristics of CdS NWs disappeared in CdS-MHP, confirming surface passivation. Dispersion-corrected DFT simulations indicated a delocalized HOMO and a LUMO localized on C3N5 in CdS-MHP. C3N5, with its extended π-conjugation and low band gap, can function as a shuttle to extract carriers and excitons in nanostructured heterojunctions, and enhance performance in optoelectronic devices. Our results demonstrate how carrier dynamics in core–shell heterostructures can be manipulated to achieve control over the reaction mechanism in photocatalysis.
Visible light assisted photocatalytic reduction of CO2 using a graphene oxide...Pawan Kumar
A new heteroleptic ruthenium complex containing 2-thiophenyl benzimidazole ligands was synthesized using a microwave technique and was immobilized to graphene oxide via covalent attachment. The synthesized catalyst was used for the photoreduction of carbon dioxide under visible light irradiation without using a sacrificial agent, which gave 2050 μmol g−1 cat methanol after 24 h of irradiation
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Consistently High Voc Values in p-i-n Type Perovskite Solar Cells Using Ni3+-...Pawan Kumar
Leading edge p-i-n type halide perovskite solar cells (PSCs) severely underperform n-i-p PSCs. p-i-n type PSCs that use PEDOT:PSS hole transport layers (HTLs) struggle to generate open-circuit photovoltage values higher than 1 V. NiO HTLs have shown greater promise in achieving high Voc values albeit inconsistently. In this report, a NiO nanomesh with Ni3+ defect grown by the hydrothermal method was used to obtain PSCs with Voc values that consistently exceeded 1.10 V (champion Voc = 1.14 V). A champion device photoconversion efficiency of 17.75% was observed. Density functional theory modeling was used to understand the interfacial properties of the NiO/perovskite interface. The PCE of PSCs constructed using the Ni3+-doped NiO nanomesh HTL was ∼34% higher than that of conventional compact NiO-based perovskite solar cells. A suite of characterization techniques such as transmission electron microscopy, field emission scanning electron microscopy, intensity-modulated photocurrent spectroscopy, intensity-modulated photovoltage spectroscopy, time-resolved photoluminescence, steady-state photoluminescence, and Kelvin probe force microscopy provided evidence of better film quality, enhanced charge transfer, and suppressed charge recombination in PSCs based on hydrothermally grown NiO nanostructures.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Images and data in the presentation are subject to copyright. Please contact redhwanm(at)mcmaster(dot)ca for permission if you want to use any of its contents.
IOSR Journal of Applied Physics (IOSR-JAP) is an open access international journal that provides rapid publication (within a month) of articles in all areas of physics and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in applied physics. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Vapor Deposition of Semiconducting Phosphorus Allotropes into TiO2 Nanotube A...Pawan Kumar
Recent evidence of exponential environmental degradation will demand a drastic shift in research and development toward exploiting alternative energy resources such as solar energy. Here, we report the successful low-cost and easily accessible synthesis of hybrid semiconductor@TiO2 nanotube photocatalysts. In order to realize its maximum potential in harvesting photons in the visible-light range, TiO2 nanotubes have been loaded with earth-abundant, low-band-gap fibrous red and black phosphorus (P). Scanning electron microscopy– and scanning transmission electron microscopy–energy-dispersive X-ray spectroscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron microscopy, and UV–vis measurements have been performed, substantiating the deposition of fibrous red and black P on top and inside the cavities of 100-μm-long electrochemically fabricated nanotubes. The nanotubular morphology of titania and a vapor-transport technique are utilized to form heterojunctions of P and TiO2. Compared to pristine anatase 3.2 eV TiO2 nanotubes, the creation of heterojunctions in the hybrid material resulted in 1.5–2.1 eV photoelectrocatalysts. An enhanced photoelectrochemical water-splitting performance under visible light compared with the individual components resulted for the P@TiO2 hybrids. This feature is due to synergistically improved charge separation in the heterojunction and more effective visible-light absorption. The electronic band structure and charge-carrier dynamics are investigated in detail using ultraviolet photoelectron spectroscopy and Kelvin probe force microscopy to elucidate the charge-separation mechanism. A Fermi-level alignment in P@TiO2 heterojunctions leads to a more reductive flat-band potential and a deeper valence band compared to pristine P and thus facilitates a better water-splitting performance. Our results demonstrate effective conversion efficiencies for the nanostructured hybrids, which may enable future applications in optoelectronic applications such as photodetectors, photovoltaics, photoelectrochemical catalysts, and sensors.
Noble Metal Free, Visible Light Driven Photocatalysis Using TiO2 Nanotube Arr...Pawan Kumar
Bulk g-C3N4 is an earth-abundant, easily synthesizable, and exceptionally stable photocatalyst with an electronic bandgap of 2.7 eV. Herein, the concepts of P-doping and size quantization are combined to synthesize highly fluorescent P-doped carbon nitride quantum dots (CNPQDs) with a bandgap of 2.1 eV. CNPQDs are hosted on anatase-phase and rutile-phase TiO2 nanotube array scaffolds, and examined as photoanodes for sunlight-driven water-splitting and as photocatalysts for surface catalytic reactions. Square-shaped rutile phase TiO2 nanotube arrays (STNAs) decorated with CNPQDs (CNPQD-STNA) generate 2.54 mA cm−2 photocurrent under AM1.5 G simulated sunlight. A champion hydrogen evolution rate of 22 µmol h−1 corresponds to a Faradaic efficiency of 93.2%. In conjunction with Ag nanoparticles (NPs), the CNPQD-STNA hybrid is also found to be an excellent plexcitonic photocatalyst for the visible light-driven transformation of 4-nitrobenzenethiol (4-NBT) to dimercaptoazobenzene (DMAB), producing reaction completion at a laser power of 1 mW (532 nm) while Ag NP/TNA and Ag NP/STNA photocatalysts cannot complete this transformation even at 10 mW laser power. The results point the way forward for photochemically robust, noble metal free, visible light harvesting photoacatalysts based on nanostructured heterojunctions of graphenic frameworks with TiO2.
Mixed-Valence Single-Atom Catalyst Derived from Functionalized GraphenePawan Kumar
Single-atom catalysts (SACs) aim at bridging the gap between homogeneous and heterogeneous catalysis. The challenge is the development of materials with ligands enabling coordination of metal atoms in different valence states, and preventing leaching or nanoparticle formation. Graphene functionalized with nitrile groups (cyanographene) is herein employed for the robust coordination of Cu(II) ions, which are partially reduced to Cu(I) due to graphene-induced charge transfer. Inspired by nature's selection of Cu(I) in enzymes for oxygen activation, this 2D mixed-valence SAC performs flawlessly in two O2-mediated reactions: the oxidative coupling of amines and the oxidation of benzylic CH bonds toward high-value pharmaceutical synthons. High conversions (up to 98%), selectivities (up to 99%), and recyclability are attained with very low metal loadings in the reaction. The synergistic effect of Cu(II) and Cu(I) is the essential part in the reaction mechanism. The developed strategy opens the door to a broad portfolio of other SACs via their coordination to various functional groups of graphene, as demonstrated by successful entrapment of FeIII/FeII single atoms to carboxy-graphene.
C3N5: A Low Bandgap Semiconductor Containing an Azo-linked Carbon Nitride Fra...Pawan Kumar
Modification of carbon nitride based polymeric 2D materials for tailoring their optical, electronic and chemical properties for various applications has gained significant interest. The present report demonstrates the synthesis of a novel modified carbon nitride framework with a remarkable 3:5 C:N stoichiometry (C3N5) and an electronic bandgap of 1.76 eV, by thermal deammoniation of the melem hydrazine precursor. Characterization revealed that in the C3N5 polymer, two s-heptazine units are bridged together with azo linkage, which constitutes an entirely new and different bonding fashion from g-C3N4 where three heptazine units are linked together with tertiary nitrogen. Extended conjugation due to overlap of azo nitrogens and increased electron density on heptazine nucleus due to the aromatic π network of heptazine units lead to an upward shift of the valence band maximum resulting in bandgap reduction down to 1.76 eV. XRD, He-ion imaging, HR-TEM, EELS, PL, fluorescence lifetime imaging, Raman, FTIR, TGA, KPFM, XPS, NMR and EPR clearly show that the properties of C3N5 are distinct from pristine carbon nitride (g-C3N4). When used as an electron transport layer (ETL) in MAPbBr3 based halide perovskite solar cells, C3N5 outperformed g-C3N4, in particular generating an open circuit photovoltage as high as 1.3 V, while C3N5 blended with MAxFA1–xPb(I0.85Br0.15)3 perovskite active layer achieved a photoconversion efficiency (PCE) up to 16.7%. C3N5 was also shown to be an effective visible light sensitizer for TiO2 photoanodes in photoelectrochemical water splitting. Because of its electron-rich character, the C3N5 material displayed instantaneous adsorption of methylene blue from aqueous solution reaching complete equilibrium within 10 min, which is significantly faster than pristine g-C3N4 and other carbon based materials. C3N5 coupled with plasmonic silver nanocubes promotes plasmon-exciton coinduced surface catalytic reactions reaching completion at much low laser intensity (1.0 mW) than g-C3N4, which showed sluggish performance even at high laser power (10.0 mW). The relatively narrow bandgap and 2D structure of C3N5 make it an interesting air-stable and temperature-resistant semiconductor for optoelectronic applications while its electron-rich character and intra sheet cavity make it an attractive supramolecular adsorbent for environmental applications.
Vapor growth of binary and ternary phosphorus-based semiconductors into TiO2 ...Pawan Kumar
We report successful synthesis of low band gap inorganic polyphosphide and TiO2 heterostructures with the aid of short-way transport reactions. Binary and ternary polyphosphides (NaP7, SnIP, and (CuI)3P12) were successfully reacted and deposited into electrochemically fabricated TiO2 nanotubes. Employing vapor phase reaction deposition, the cavities of 100 μm long TiO2 nanotubes were infiltrated; approximately 50% of the nanotube arrays were estimated to be infiltrated in the case of NaP7. Intensive characterization of the hybrid materials with techniques including SEM, FIB, HR-TEM, Raman spectroscopy, XRD, and XPS proved the successful vapor phase deposition and synthesis of the substances on and inside the nanotubes. The polyphosphide@TiO2 hybrids exhibited superior water splitting performance compared to pristine materials and were found to be more active at higher wavelengths. SnIP@TiO2 emerged to be the most active among the polyphosphide@TiO2 materials. The improved photocatalytic performance might be due to Fermi level re-alignment and a lower charge transfer resistance which facilitated better charge separation from inorganic phosphides to TiO2.
Asymmetric Multipole Plasmon-Mediated Catalysis Shifts the Product Selectivit...Pawan Kumar
Cu/TiO2 is a well-known photocatalyst for the photocatalytic transformation of CO2 into methane. The formation of C2+ products such as ethane and ethanol rather than methane is more interesting due to their higher energy density and economic value, but the formation of C–C bonds is currently a major challenge in CO2 photoreduction. In this context, we report the dominant formation of a C2 product, namely, ethane, from the gas-phase photoreduction of CO2 using TiO2 nanotube arrays (TNTAs) decorated with large-sized (80–200 nm) Ag and Cu nanoparticles without the use of a sacrificial agent or hole scavenger. Isotope-labeled mass spectrometry was used to verify the origin and identity of the reaction products. Under 2 h AM1.5G 1-sun illumination, the total rate of hydrocarbon production (methane + ethane) was highest for AgCu-TNTA with a total CxH2x+2 rate of 23.88 μmol g–1 h–1. Under identical conditions, the CxH2x+2 production rates for Ag-TNTA and Cu-TNTA were 6.54 and 1.39 μmol g–1 h–1, respectively. The ethane selectivity was the highest for AgCu-TNTA with 60.7%, while the ethane selectivity was found to be 15.9 and 10% for the Ag-TNTA and Cu-TNTA, respectively. Adjacent adsorption sites in our photocatalyst develop an asymmetric charge distribution due to quadrupole resonances in large metal nanoparticles and multipole resonances in Ag–Cu heterodimers. Such an asymmetric charge distribution decreases adsorbate–adsorbate repulsion and facilitates C–C coupling of reaction intermediates, which otherwise occurs poorly in TNTAs decorated with small metal nanoparticles.
Metal ion burst: Examining metal ion diffusion using ultrafast fluorescence s...Chelsey Crosse
Presentation to accompany my report for my oral examination. Details background of fluorescence upconversion techniques, development of measurement systems for release of a metal cation and minimization of diffusion distribution in solutions.
Phase behavior and characterization of PECs AIChE 2014 David Scheuing
Presented Nov. 2014 at AIChE meeting. Examines the use of polyelectrolyte complexes for surface modification in consumer products such as cleaners. Summarizes synthesis and characterization of stable complexes in solution via light scattering. Illustrates characterization of adsorbed layers of complexes on germanium and silica surfaces via Fourier Transform Infrared spectroscopy and gravimetry via a quartz crystal microbalance.
Photocatalytic Mechanism Control and Study of Carrier Dynamics in CdS@C3N5 Co...Pawan Kumar
We present a potential solution to the problem of extraction of photogenerated holes from CdS nanocrystals and nanowires. The nanosheet form of C3N5 is a low-band-gap (Eg = 2.03 eV), azo-linked graphenic carbon nitride framework formed by the polymerization of melem hydrazine (MHP). C3N5 nanosheets were either wrapped around CdS nanorods (NRs) following the synthesis of pristine chalcogenide or intercalated among them by an in situ synthesis protocol to form two kinds of heterostructures, CdS-MHP and CdS-MHPINS, respectively. CdS-MHP improved the photocatalytic degradation rate of 4-nitrophenol by nearly an order of magnitude in comparison to bare CdS NRs. CdS-MHP also enhanced the sunlight-driven photocatalytic activity of bare CdS NWs for the decolorization of rhodamine B (RhB) by a remarkable 300% through the improved extraction and utilization of photogenerated holes due to surface passivation. More interestingly, CdS-MHP provided reaction pathway control over RhB degradation. In the absence of scavengers, CdS-MHP degraded RhB through the N-deethylation pathway. When either hole scavenger or electron scavenger was added to the RhB solution, the photocatalytic activity of CdS-MHP remained mostly unchanged, while the degradation mechanism shifted to the chromophore cleavage (cycloreversion) pathway. We investigated the optoelectronic properties of CdS-C3N5 heterojunctions using density functional theory (DFT) simulations, finite difference time domain (FDTD) simulations, time-resolved terahertz spectroscopy (TRTS), and photoconductivity measurements. TRTS indicated high carrier mobilities >450 cm2 V–1 s–1 and carrier relaxation times >60 ps for CdS-MHP, while CdS-MHPINS exhibited much lower mobilities <150 cm2 V–1 s–1 and short carrier relaxation times <20 ps. Hysteresis in the photoconductive J–V characteristics of CdS NWs disappeared in CdS-MHP, confirming surface passivation. Dispersion-corrected DFT simulations indicated a delocalized HOMO and a LUMO localized on C3N5 in CdS-MHP. C3N5, with its extended π-conjugation and low band gap, can function as a shuttle to extract carriers and excitons in nanostructured heterojunctions, and enhance performance in optoelectronic devices. Our results demonstrate how carrier dynamics in core–shell heterostructures can be manipulated to achieve control over the reaction mechanism in photocatalysis.
Visible light assisted photocatalytic reduction of CO2 using a graphene oxide...Pawan Kumar
A new heteroleptic ruthenium complex containing 2-thiophenyl benzimidazole ligands was synthesized using a microwave technique and was immobilized to graphene oxide via covalent attachment. The synthesized catalyst was used for the photoreduction of carbon dioxide under visible light irradiation without using a sacrificial agent, which gave 2050 μmol g−1 cat methanol after 24 h of irradiation
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Growth and Characterization of Barium doped Potassium Hydrogen Phthalate Sing...IJERA Editor
The Non Linear Optical materials have acquired new significance with the advent of a large number of devices
utilizing solid state Laser sources. Potassium Hydrogen Phthalate one of the Non Linear Optical material having
superior non linear optical properties has been exploited for variety of application. In the present work, KHP
single crystals were grown by slow evaporation technique with Barium metal ion as a dopant. The grown
crystals were subjected to powder XRD analysis and the result shows that the Ba2+ ions does not alter the crystal
structure, but it enter into the crystal lattice of pure KHP. The optical transparency of the grown crystal was
studied by UV-Visible spectroscopy, the molecular structure was confirmed by FTIR analysis and its thermal
stability by TG/DTA analysis. The improved SHG efficiency of barium doped Potassium Hydrogen Phthalate
crystal could enhance the nonlinearity behaviour. In addition to this, the electrical parameter such as dielectric
constant was studied in detail.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Investigation on Growth and Optical Properties of LVCC Single CrystalsIJERA Editor
L-valine cadmium chloride (LVCC) single crystals were grown by slow evaporation technique with different
concentrations (0.25, 0.5, 0.75 and 1.0 mole) of CdCl2. All the grown crystals were subjected to single crystal
X-ray diffraction analysis. Solid state parameters were calculated for the grown crystals. The optical properties
of the crystals were investigated by UV-Vis. absorption spectroscopy. The results revealed that, the wider
bandgap and large transparency in the visible region along with higher polarizability of the grown crystals are
highly useful in optoelectronic devices. Also according to our needs, one can tune the optical and electrical
properties of LVCC crystals by adjusting the concentration of CdCl2 in LVCC.
Determination of nonlinear absorption (β) and refraction (n2)by the Z-scan me...IOSR Journals
Potassium Pentaborate nonlinear optical (NLO) material was synthesized by the solution growth method. The grown crystals were subjected to structural, optical and mechanical property studies. Crystal with excellent transparency were grown with maximum size of 9mm×8mm×5mm and the grown crystals were characterized by single crystal Single crystal XRD, FT-IR, TGA-DTA&DSC, and UV–vis-NIR studies. The crystal belongs to orthorhombic with a space group of mm2 having unit-cell dimensions a = 11.068Åb= 11.175Å c = 9.058Åand α = 90°; β = 90°; and γ =90°; Z=4, at 298(2) K. The second-order nonlinear optical property of the polycrystalline sample has been confirmed by Kurtz-Perry powder SHG analysis. Third order nonlinear optical properties were also studied by Z-scan techniques. Nonlinear absorption and nonlinear refractive index were found out and the third order bulk susceptibility of compound was also calculated.
Second order and Third order NLO studies of L- alanine crystals grown in aque...Editor IJCATR
Nonlinear optics is a fascinating field, which plays a vital role in the emerging field of photonics and optoelectronics. A
nonlinear optical crystal of L-alanine grown in aqueous solution of hydrofluoric acid is done by slow evaporation method. L-alanine is
an NLO material and it has a Second Harmonic Generation (SHG) efficiency of about 0.3 times that of KDP. To alter the various
properties of L-alanine, single crystals of L-alanine have been grown in the aqueous solution of hydrofluoric acid. In this work, Lalanine
was admixtured with hydrofluoric acid (LAHF) in the molar ratio of 1:1. The grown crystals were colorless and transparent
and they were subjected to various studies for characterization.The third-order nonlinearities of LAHF crystal have been investigated
by Z-scan method. The values of nonlinear refractive index (n2), the nonlinear absorption coefficient (β) and third-order nonlinear
susceptibility (χ(3)) are estimated for the sample
Growth, structural, optical, electrical and SHG studies of N-N′ allylthiourea...IJERA Editor
Potassium Dihydrogen Phosphate (KDP) crystals are one of the most popular crystals used for Non-linear
Optical (NLO) applications. Pure KDP single crystals and KDP crystals doped with N-N′ allylthiourea were
grown by the method of slow evaporation from aqueous solutions. The grown pure and doped crystals were
confirmed by X-ray single crystal and powder diffraction studies. The pure and doped crystals were
characterized by FTIR spectroscopy studies. Absorptions of these grown crystals were analyzed using UV–Vis–
NIR studies, and it was found that these crystals possess minimum absorption in the entire visible region.
Nonlinear optical studies of pure and doped crystals were carried out and it reveals that the dopants have
increased the efficiency of KDP crystals. Dielectric measurements were carried out along both the unique axis
and perpendicular directions at various temperatures ranging from 40 to 150 °C. The dielectric constant and the
dielectric loss values of N-N′ allylthiourea doped KDP crystals were lower than the pure KDP crystals. Also, it
indicates that 0.8 mole% N-N′ allylthiourea addition to KDP leads to low permittivity value dielectrics. The
results are discussed.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Ba[Mg2Al2N4]Eu2+ phosphor for enhancing the optical quality of the 6600K CPW-...TELKOMNIKA JOURNAL
Compared with conventional lamps, LED-based light sources have a superior lifetime, efficiency, and reliability, which promise significant reductions in power consumption and pollution from fossil fuel power plants. The main purpose of this paper is proposed and investigated the effect of the concentration of Ba[Mg2Al2N4]Eu2+conversion phosphor on the CCT deviation (D-CCT) and lumen output (LO) of the 6600 K conformal-packaging white LEDs (CPW-LEDs). For this purpose, we used the Light Tools and Mat Lab software to investigate this problem. From the research results, we can state that the concentration of the red phosphor crucially influenced on the optical quality of the 6600 K CPW-LEDs. The D-CCT can be decreased from 4700K to 2500K, and the LO can be increased from 600 lm. to 1200 lm. This research can provide the new recommendation for LEDs industry at this time.
This ppt has been done for the Academic Writing course. In this presentation , the growth of undoped and glycine doped L-alanine cadmium chloride crystals and results of various studies about the grown crystals were discussed.
International Journal of Engineering and Science Invention (IJESI)inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Unusual Electronic Properties of Cellulose Nanocrystals Conjugated to Cobalt ...Pawan Kumar
Octacarboxylated cobalt phthalocyanine (CoPc) was covalently conjugated to cellulose nanocrystals (CNCs) by employing an esterification protocol. Solid-state NMR, X-ray photoelectron spectroscopy (XPS), Raman, and infrared spectra were used to verify and study the nature of covalent attachment responsible for the immobilization of CoPc on the CNC surface. The covalent attachment was investigated from a theoretical simulation perspective using dispersion-corrected density functional theory (DFT) calculations, which verified the stable bond formation between CNC and CoPc. CoPc is an organic semiconductor with a high exciton binding energy, and CNCs are known to be insulating. Yet, Kelvin probe force microscopy (KPFM) indicated charge carrier generation and long-lived charge separation in the CNC–CoPc conjugate compared to pristine CoPc under visible light illumination. Such behavior is more typical of a semiconductor nanocomposite. The CNC–CoPc conjugate exhibited superior performance in the visible-light-driven surface photocatalytic reduction of 4-nitrobenzenethiol (4-NBT) to p,p′-dimercaptoazobenzene (DMAB) and photodegradation of rhodamine B.
Investigation on the Growth and Physio-Chemical Properties of L-Alanine Mixed...IJERA Editor
Pure and L-alanine an aminoacid mixed bisthiourea cadmium bromide chloride single crystals were grown by slow evaporation technique. A drastic change in morphology was inferred with the concentration of L-alanine. Mixed crystals have better optical transparency as well as NLO efficiency than the pure BTCBC which were imperative for nonlinear applications. Also L-alanine mixing increases the hardness. The AC conductivity of the grown crystals increases with increasing concentration of L-alanine.
Similar to International Journal of Engineering Research and Development (20)
A Novel Method for Prevention of Bandwidth Distributed Denial of Service AttacksIJERD Editor
Distributed Denial of Service (DDoS) Attacks became a massive threat to the Internet. Traditional
Architecture of internet is vulnerable to the attacks like DDoS. Attacker primarily acquire his army of Zombies,
then that army will be instructed by the Attacker that when to start an attack and on whom the attack should be
done. In this paper, different techniques which are used to perform DDoS Attacks, Tools that were used to
perform Attacks and Countermeasures in order to detect the attackers and eliminate the Bandwidth Distributed
Denial of Service attacks (B-DDoS) are reviewed. DDoS Attacks were done by using various Flooding
techniques which are used in DDoS attack.
The main purpose of this paper is to design an architecture which can reduce the Bandwidth
Distributed Denial of service Attack and make the victim site or server available for the normal users by
eliminating the zombie machines. Our Primary focus of this paper is to dispute how normal machines are
turning into zombies (Bots), how attack is been initiated, DDoS attack procedure and how an organization can
save their server from being a DDoS victim. In order to present this we implemented a simulated environment
with Cisco switches, Routers, Firewall, some virtual machines and some Attack tools to display a real DDoS
attack. By using Time scheduling, Resource Limiting, System log, Access Control List and some Modular
policy Framework we stopped the attack and identified the Attacker (Bot) machines
Hearing loss is one of the most common human impairments. It is estimated that by year 2015 more
than 700 million people will suffer mild deafness. Most can be helped by hearing aid devices depending on the
severity of their hearing loss. This paper describes the implementation and characterization details of a dual
channel transmitter front end (TFE) for digital hearing aid (DHA) applications that use novel micro
electromechanical- systems (MEMS) audio transducers and ultra-low power-scalable analog-to-digital
converters (ADCs), which enable a very-low form factor, energy-efficient implementation for next-generation
DHA. The contribution of the design is the implementation of the dual channel MEMS microphones and powerscalable
ADC system.
Influence of tensile behaviour of slab on the structural Behaviour of shear c...IJERD Editor
-A composite beam is composed of a steel beam and a slab connected by means of shear connectors
like studs installed on the top flange of the steel beam to form a structure behaving monolithically. This study
analyzes the effects of the tensile behavior of the slab on the structural behavior of the shear connection like slip
stiffness and maximum shear force in composite beams subjected to hogging moment. The results show that the
shear studs located in the crack-concentration zones due to large hogging moments sustain significantly smaller
shear force and slip stiffness than the other zones. Moreover, the reduction of the slip stiffness in the shear
connection appears also to be closely related to the change in the tensile strain of rebar according to the increase
of the load. Further experimental and analytical studies shall be conducted considering variables such as the
reinforcement ratio and the arrangement of shear connectors to achieve efficient design of the shear connection
in composite beams subjected to hogging moment.
Gold prospecting using Remote Sensing ‘A case study of Sudan’IJERD Editor
Gold has been extracted from northeast Africa for more than 5000 years, and this may be the first
place where the metal was extracted. The Arabian-Nubian Shield (ANS) is an exposure of Precambrian
crystalline rocks on the flanks of the Red Sea. The crystalline rocks are mostly Neoproterozoic in age. ANS
includes the nations of Israel, Jordan. Egypt, Saudi Arabia, Sudan, Eritrea, Ethiopia, Yemen, and Somalia.
Arabian Nubian Shield Consists of juvenile continental crest that formed between 900 550 Ma, when intra
oceanic arc welded together along ophiolite decorated arc. Primary Au mineralization probably developed in
association with the growth of intra oceanic arc and evolution of back arc. Multiple episodes of deformation
have obscured the primary metallogenic setting, but at least some of the deposits preserve evidence that they
originate as sea floor massive sulphide deposits.
The Red Sea Hills Region is a vast span of rugged, harsh and inhospitable sector of the Earth with
inimical moon-like terrain, nevertheless since ancient times it is famed to be an abode of gold and was a major
source of wealth for the Pharaohs of ancient Egypt. The Pharaohs old workings have been periodically
rediscovered through time. Recent endeavours by the Geological Research Authority of Sudan led to the
discovery of a score of occurrences with gold and massive sulphide mineralizations. In the nineties of the
previous century the Geological Research Authority of Sudan (GRAS) in cooperation with BRGM utilized
satellite data of Landsat TM using spectral ratio technique to map possible mineralized zones in the Red Sea
Hills of Sudan. The outcome of the study mapped a gossan type gold mineralization. Band ratio technique was
applied to Arbaat area and a signature of alteration zone was detected. The alteration zones are commonly
associated with mineralization. The alteration zones are commonly associated with mineralization. A filed check
confirmed the existence of stock work of gold bearing quartz in the alteration zone. Another type of gold
mineralization that was discovered using remote sensing is the gold associated with metachert in the Atmur
Desert.
Reducing Corrosion Rate by Welding DesignIJERD Editor
The paper addresses the importance of welding design to prevent corrosion at steel. Welding is
used to join pipe, profiles at bridges, spindle, and a lot more part of engineering construction. The
problems happened associated with welding are common issues in these fields, especially corrosion.
Corrosion can be reduced with many methods, they are painting, controlling humidity, and also good
welding design. In the research, it can be found that reducing residual stress on the welding can be
solved in corrosion rate reduction problem.
Preheating on 500oC and 600oC give better condition to reduce corosion rate than condition after
preheating 400oC. For all welding groove type, material with 500oC and 600oC preheating after 14 days
corrosion test is 0,5%-0,69% lost. Material with 400oC preheating after 14 days corrosion test is 0,57%-0,76%
lost.
Welding groove also influence corrosion rate. X and V type welding groove give better condition to reduce
corrosion rate than use 1/2V and 1/2 X welding groove. After 14 days corrosion test, the samples with
X welding groove type is 0,5%-0,57% lost. The samples with V welding groove after 14 days corrosion test is
0,51%-0,59% lost. The samples with 1/2V and 1/2X welding groove after 14 days corrosion test is 0,58%-
0,71% lost.
Router 1X3 – RTL Design and VerificationIJERD Editor
Routing is the process of moving a packet of data from source to destination and enables messages
to pass from one computer to another and eventually reach the target machine. A router is a networking device
that forwards data packets between computer networks. It is connected to two or more data lines from different
networks (as opposed to a network switch, which connects data lines from one single network). This paper,
mainly emphasizes upon the study of router device, it‟s top level architecture, and how various sub-modules of
router i.e. Register, FIFO, FSM and Synchronizer are synthesized, and simulated and finally connected to its top
module.
Active Power Exchange in Distributed Power-Flow Controller (DPFC) At Third Ha...IJERD Editor
This paper presents a component within the flexible ac-transmission system (FACTS) family, called
distributed power-flow controller (DPFC). The DPFC is derived from the unified power-flow controller (UPFC)
with an eliminated common dc link. The DPFC has the same control capabilities as the UPFC, which comprise
the adjustment of the line impedance, the transmission angle, and the bus voltage. The active power exchange
between the shunt and series converters, which is through the common dc link in the UPFC, is now through the
transmission lines at the third-harmonic frequency. DPFC multiple small-size single-phase converters which
reduces the cost of equipment, no voltage isolation between phases, increases redundancy and there by
reliability increases. The principle and analysis of the DPFC are presented in this paper and the corresponding
simulation results that are carried out on a scaled prototype are also shown.
Mitigation of Voltage Sag/Swell with Fuzzy Control Reduced Rating DVRIJERD Editor
Power quality has been an issue that is becoming increasingly pivotal in industrial electricity
consumers point of view in recent times. Modern industries employ Sensitive power electronic equipments,
control devices and non-linear loads as part of automated processes to increase energy efficiency and
productivity. Voltage disturbances are the most common power quality problem due to this the use of a large
numbers of sophisticated and sensitive electronic equipment in industrial systems is increased. This paper
discusses the design and simulation of dynamic voltage restorer for improvement of power quality and
reduce the harmonics distortion of sensitive loads. Power quality problem is occurring at non-standard
voltage, current and frequency. Electronic devices are very sensitive loads. In power system voltage sag,
swell, flicker and harmonics are some of the problem to the sensitive load. The compensation capability
of a DVR depends primarily on the maximum voltage injection ability and the amount of stored
energy available within the restorer. This device is connected in series with the distribution feeder at
medium voltage. A fuzzy logic control is used to produce the gate pulses for control circuit of DVR and the
circuit is simulated by using MATLAB/SIMULINK software.
Study on the Fused Deposition Modelling In Additive ManufacturingIJERD Editor
Additive manufacturing process, also popularly known as 3-D printing, is a process where a product
is created in a succession of layers. It is based on a novel materials incremental manufacturing philosophy.
Unlike conventional manufacturing processes where material is removed from a given work price to derive the
final shape of a product, 3-D printing develops the product from scratch thus obviating the necessity to cut away
materials. This prevents wastage of raw materials. Commonly used raw materials for the process are ABS
plastic, PLA and nylon. Recently the use of gold, bronze and wood has also been implemented. The complexity
factor of this process is 0% as in any object of any shape and size can be manufactured.
Spyware triggering system by particular string valueIJERD Editor
This computer programme can be used for good and bad purpose in hacking or in any general
purpose. We can say it is next step for hacking techniques such as keylogger and spyware. Once in this system if
user or hacker store particular string as a input after that software continually compare typing activity of user
with that stored string and if it is match then launch spyware programme.
A Blind Steganalysis on JPEG Gray Level Image Based on Statistical Features a...IJERD Editor
This paper presents a blind steganalysis technique to effectively attack the JPEG steganographic
schemes i.e. Jsteg, F5, Outguess and DWT Based. The proposed method exploits the correlations between
block-DCTcoefficients from intra-block and inter-block relation and the statistical moments of characteristic
functions of the test image is selected as features. The features are extracted from the BDCT JPEG 2-array.
Support Vector Machine with cross-validation is implemented for the classification.The proposed scheme gives
improved outcome in attacking.
Secure Image Transmission for Cloud Storage System Using Hybrid SchemeIJERD Editor
- Data over the cloud is transferred or transmitted between servers and users. Privacy of that
data is very important as it belongs to personal information. If data get hacked by the hacker, can be
used to defame a person’s social data. Sometimes delay are held during data transmission. i.e. Mobile
communication, bandwidth is low. Hence compression algorithms are proposed for fast and efficient
transmission, encryption is used for security purposes and blurring is used by providing additional
layers of security. These algorithms are hybridized for having a robust and efficient security and
transmission over cloud storage system.
Application of Buckley-Leverett Equation in Modeling the Radius of Invasion i...IJERD Editor
A thorough review of existing literature indicates that the Buckley-Leverett equation only analyzes
waterflood practices directly without any adjustments on real reservoir scenarios. By doing so, quite a number
of errors are introduced into these analyses. Also, for most waterflood scenarios, a radial investigation is more
appropriate than a simplified linear system. This study investigates the adoption of the Buckley-Leverett
equation to estimate the radius invasion of the displacing fluid during waterflooding. The model is also adopted
for a Microbial flood and a comparative analysis is conducted for both waterflooding and microbial flooding.
Results shown from the analysis doesn’t only records a success in determining the radial distance of the leading
edge of water during the flooding process, but also gives a clearer understanding of the applicability of
microbes to enhance oil production through in-situ production of bio-products like bio surfactans, biogenic
gases, bio acids etc.
Gesture Gaming on the World Wide Web Using an Ordinary Web CameraIJERD Editor
- Gesture gaming is a method by which users having a laptop/pc/x-box play games using natural or
bodily gestures. This paper presents a way of playing free flash games on the internet using an ordinary webcam
with the help of open source technologies. Emphasis in human activity recognition is given on the pose
estimation and the consistency in the pose of the player. These are estimated with the help of an ordinary web
camera having different resolutions from VGA to 20mps. Our work involved giving a 10 second documentary to
the user on how to play a particular game using gestures and what are the various kinds of gestures that can be
performed in front of the system. The initial inputs of the RGB values for the gesture component is obtained by
instructing the user to place his component in a red box in about 10 seconds after the short documentary before
the game is finished. Later the system opens the concerned game on the internet on popular flash game sites like
miniclip, games arcade, GameStop etc and loads the game clicking at various places and brings the state to a
place where the user is to perform only gestures to start playing the game. At any point of time the user can call
off the game by hitting the esc key and the program will release all of the controls and return to the desktop. It
was noted that the results obtained using an ordinary webcam matched that of the Kinect and the users could
relive the gaming experience of the free flash games on the net. Therefore effective in game advertising could
also be achieved thus resulting in a disruptive growth to the advertising firms.
Hardware Analysis of Resonant Frequency Converter Using Isolated Circuits And...IJERD Editor
-LLC resonant frequency converter is basically a combo of series as well as parallel resonant ckt. For
LCC resonant converter it is associated with a disadvantage that, though it has two resonant frequencies, the
lower resonant frequency is in ZCS region[5]. For this application, we are not able to design the converter
working at this resonant frequency. LLC resonant converter existed for a very long time but because of
unknown characteristic of this converter it was used as a series resonant converter with basically a passive
(resistive) load. . Here, it was designed to operate in switching frequency higher than resonant frequency of the
series resonant tank of Lr and Cr converter acts very similar to Series Resonant Converter. The benefit of LLC
resonant converter is narrow switching frequency range with light load[6] . Basically, the control ckt plays a
very imp. role and hence 555 Timer used here provides a perfect square wave as the control ckt provides no
slew rate which makes the square wave really strong and impenetrable. The dead band circuit provides the
exclusive dead band in micro seconds so as to avoid the simultaneous firing of two pairs of IGBT’s where one
pair switches off and the other on for a slightest period of time. Hence, the isolator ckt here is associated with
each and every ckt used because it acts as a driver and an isolation to each of the IGBT is provided with one
exclusive transformer supply[3]. The IGBT’s are fired using the appropriate signal using the previous boards
and hence at last a high frequency rectifier ckt with a filtering capacitor is used to get an exact dc
waveform .The basic goal of this particular analysis is to observe the wave forms and characteristics of
converters with differently positioned passive elements in the form of tank circuits.
Simulated Analysis of Resonant Frequency Converter Using Different Tank Circu...IJERD Editor
LLC resonant frequency converter is basically a combo of series as well as parallel resonant ckt. For
LCC resonant converter it is associated with a disadvantage that, though it has two resonant frequencies, the
lower resonant frequency is in ZCS region [5]. For this application, we are not able to design the converter
working at this resonant frequency. LLC resonant converter existed for a very long time but because of
unknown characteristic of this converter it was used as a series resonant converter with basically a passive
(resistive) load. . Here, it was designed to operate in switching frequency higher than resonant frequency of the
series resonant tank of Lr and Cr converter acts very similar to Series Resonant Converter. The benefit of LLC
resonant converter is narrow switching frequency range with light load[6] . Basically, the control ckt plays a
very imp. role and hence 555 Timer used here provides a perfect square wave as the control ckt provides no
slew rate which makes the square wave really strong and impenetrable. The dead band circuit provides the
exclusive dead band in micro seconds so as to avoid the simultaneous firing of two pairs of IGBT’s where one
pair switches off and the other on for a slightest period of time. Hence, the isolator ckt here is associated with
each and every ckt used because it acts as a driver and an isolation to each of the IGBT is provided with one
exclusive transformer supply[3]. The IGBT’s are fired using the appropriate signal using the previous boards
and hence at last a high frequency rectifier ckt with a filtering capacitor is used to get an exact dc
waveform .The basic goal of this particular analysis is to observe the wave forms and characteristics of
converters with differently positioned passive elements in the form of tank circuits. The supported simulation
is done through PSIM 6.0 software tool
Amateurs Radio operator, also known as HAM communicates with other HAMs through Radio
waves. Wireless communication in which Moon is used as natural satellite is called Moon-bounce or EME
(Earth -Moon-Earth) technique. Long distance communication (DXing) using Very High Frequency (VHF)
operated amateur HAM radio was difficult. Even with the modest setup having good transceiver, power
amplifier and high gain antenna with high directivity, VHF DXing is possible. Generally 2X11 YAGI antenna
along with rotor to set horizontal and vertical angle is used. Moon tracking software gives exact location,
visibility of Moon at both the stations and other vital data to acquire real time position of moon.
“MS-Extractor: An Innovative Approach to Extract Microsatellites on „Y‟ Chrom...IJERD Editor
Simple Sequence Repeats (SSR), also known as Microsatellites, have been extensively used as
molecular markers due to their abundance and high degree of polymorphism. The nucleotide sequences of
polymorphic forms of the same gene should be 99.9% identical. So, Microsatellites extraction from the Gene is
crucial. However, Microsatellites repeat count is compared, if they differ largely, he has some disorder. The Y
chromosome likely contains 50 to 60 genes that provide instructions for making proteins. Because only males
have the Y chromosome, the genes on this chromosome tend to be involved in male sex determination and
development. Several Microsatellite Extractors exist and they fail to extract microsatellites on large data sets of
giga bytes and tera bytes in size. The proposed tool “MS-Extractor: An Innovative Approach to extract
Microsatellites on „Y‟ Chromosome” can extract both Perfect as well as Imperfect Microsatellites from large
data sets of human genome „Y‟. The proposed system uses string matching with sliding window approach to
locate Microsatellites and extracts them.
Importance of Measurements in Smart GridIJERD Editor
- The need to get reliable supply, independence from fossil fuels, and capability to provide clean
energy at a fixed and lower cost, the existing power grid structure is transforming into Smart Grid. The
development of a smart energy distribution grid is a current goal of many nations. A Smart Grid should have
new capabilities such as self-healing, high reliability, energy management, and real-time pricing. This new era
of smart future grid will lead to major changes in existing technologies at generation, transmission and
distribution levels. The incorporation of renewable energy resources and distribution generators in the existing
grid will increase the complexity, optimization problems and instability of the system. This will lead to a
paradigm shift in the instrumentation and control requirements for Smart Grids for high quality, stable and
reliable electricity supply of power. The monitoring of the grid system state and stability relies on the
availability of reliable measurement of data. In this paper the measurement areas that highlight new
measurement challenges, development of the Smart Meters and the critical parameters of electric energy to be
monitored for improving the reliability of power systems has been discussed.
Study of Macro level Properties of SCC using GGBS and Lime stone powderIJERD Editor
One of the major environmental concerns is the disposal of the waste materials and utilization of
industrial by products. Lime stone quarries will produce millions of tons waste dust powder every year. Having
considerable high degree of fineness in comparision to cement this material may be utilized as a partial
replacement to cement. For this purpose an experiment is conducted to investigate the possibility of using lime
stone powder in the production of SCC with combined use GGBS and how it affects the fresh and mechanical
properties of SCC. First SCC is made by replacing cement with GGBS in percentages like 10, 20, 30, 40, 50 and
by taking the optimum mix with GGBS lime stone powder is blended to mix in percentages like 5, 10, 15, 20 as
a partial replacement to cement. Test results shows that the SCC mix with combination of 30% GGBS and 15%
limestone powder gives maximum compressive strength and fresh properties are also in the limits prescribed by
the EFNARC.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
From Daily Decisions to Bottom Line: Connecting Product Work to Revenue by VP...
International Journal of Engineering Research and Development
1. International Journal of Engineering Research and Development
e-ISSN: 2278-067X, p-ISSN: 2278-800X, www.ijerd.com
Volume 10, Issue 8 (August 2014), PP.26-30
Investigations on the Structural, Optical and Dielectric Behavior
of L-Histidinium per chlorate: A Nonlinear Optical Single Crystal
R. Kirubagaran and J. Madhavan*
Department of Physics, Loyola College, Chennai – 34
Abstract:- L-Histidinium perchlorate (LHPCL) a nonlinear optical single crystal was synthesized at ambient
temperature. The solubility of LHPCL in water at varying temperatures was determined. Bulk single crystals
were grown by the slow evaporation method at constant temperature. Powder X-ray diffraction patterns of the
grown crystals were recorded and indexed. The UV cut-off of frequency was identified from the
UV–Vis-NIR absorption spectrum. Nonlinear optical study reveals that the Second Harmonic Generation (SHG)
efficiency of LHPCL is nearly 3.4 times that of KDP.
26
Keywords:- NLO, LHPCL, Dielectric studies
I. INTRODUCTION
In recent decades, more attention has been paid towards organic nonlinear optical materials because of
their wide transparency in UV and visible region, high nonlinear susceptibility, high laser damage threshold and
fast response than the commercially available inorganic materials. By molecular engineering, one can develop
many organic crystals displaying better nonlinear optical properties than the inorganic materials, in particular for
Second Harmonic Generation [1, 2]. Complexes of amino acids with inorganic acids / salts are promising
materials for optical second harmonic generation as they tend to combine the advantages of the organic amino
acid with that of the inorganic acid. Histidine is the only standard amino acid having an imidazole side chain
with pKa near neutrality. In many enzyme catalyzed reactions, histidine residue facilitates the reaction by
serving as a proton donor or acceptor. The function and role of histidine and its residues in living matter is
characterized by the imidazole group. In the present paper, we report the optimization conditions for the growth
of good quality single crystal of LHPCL by slow evaporation method. The grown single crystal of LHPCL was
subjected to various characterization techniques like X-ray powder diffraction, UV-Vis-NIR spectroscopy,
dielectric and SHG studies.
II. EXPERIMENTAL PROCEDURE
2.1 Synthesis of LHPCL
LHPCL was synthesized by dissolving stoichiometric amount of a basic amino acid L-histidine
(Merck-99%) and high purity perchloric acid in deionized water. To ensure high purity, the material was
purified by successive crystallization twice or thrice, using deionized water.
2.2 Solubility determination
In solution growth technique, the size of a crystal depends on the amount of the material available in
the solution, which in turn is decided by the solubility of the material in the solvent. Recrystallized salt was used
for the studies. Solubility of LHPCL was determined by dissolving the solute in deionized water in an airtight
container maintained at a constant temperature with continuous stirring. After attaining the saturation, the
equilibrium concentration of the solute was estimated gravimetrically. The same process was repeated for
different temperatures (30, 35, 40, 45 and 50°C). The variation of solubility with temperature is shown in Figure
1.
2. Investigations On The Structural, Optical And Dielectric Behavior Of L-Histidinium
30 35 40 45 50
27
12
10
8
6
4
2
Concentration (g /100 ml)
Temperature ( oC )
Figure 1 Solubility curve of LHPCL
2.3 Growth of LHPCL crystals
Single crystals with perfect external shape were obtained by spontaneous nucleation. Good quality
crystals, free from macro defects were chosen as seeds to carry out the further growth experiments. From the
mother solution, a relatively large size crystal was successfully grown in a period of 25 days. Figure 2 shows the
photograph of the as grown single crystal of LHPCL.
Figure 2 Photograph of as grown single crystal of LHPCL
III. RESULTS AND DISCUSSION
3.1 Powder X-ray diffraction analysis
Powder X-ray diffraction analysis (PXRD) was carried out using an X-ray diffractometer, MODEL
RICH SEIFERT, XRD 3000P with monochromatic nickel filtered CuKα (λ = 0.15406 nm) radiation. The sample
was scanned over the range 10 - 40° at the rate of one degree/minute. The recorded powder X-ray diffraction
pattern of LHPCL is shown in Figure 3. The XRD data of LHPCL indicates that it crystallizes in the monoclinic
system with P21 space group. The XRD data of LHPCL single crystal is given in Table 1. The data of the
present work is in good agreement with the reported values [3].
10 20 30 40
300
250
200
150
100
50
0
(2 1 -1)
(0 1 4)
(0 3 1)
(1 1 2)
(0 2 2)
(1 0 -2)
(1 1 1)
(1 1 0)
(1 0 1)
Intensity (arb. units)
two theeta
Figure 3Powder X-ray diffraction pattern of LHPCL
3. Investigations On The Structural, Optical And Dielectric Behavior Of L-Histidinium
Table 1 Crystal XRD data of LHPCL
Empirical Formula C6H10N3O6Cl
Crystal system Monoclinic
Space group P21
a (Å) 5.022
b (Å) 9.161
c (Å) 10.351
β° 92.269°
28
3.2 UV-Vis-NIR study
The UV-Vis-NIR absorption spectrum of LHPCL is shown in Figure 4. It is observed from the
spectrum that LHPCL has a wide optical transmission window. The lower cut-off wavelength of the crystal is
found to be 280 nm, and thus ascertain the fact that the crystal can be used for laser applications. Using Tauc
relation a graph was plotted to estimate the band gap values. Figure 5 shows the plot of (αhν)2 versus hν, where
α is the optical absorption coefficient and hν is the energy of the incident photon. The energy gap (Eg) is
determined by extrapolating the straight line portion of the curve to (αhν)2 = 0. From this graph, the band gap
(Eg) is found to be 4.9eV.
Figure 4 UV-Vis-NIR spectrums
Figure 5 Plot of (αhν) 2 versus photon energy (hν)
4. Investigations On The Structural, Optical And Dielectric Behavior Of L-Histidinium
29
3.3 Nonlinear optical (NLO) test
To confirm the nonlinear optical property, Kurtz and Perry powder technique was carried out for
LHPCL crystal [4]. The SHG efficiency of the grown crystal was checked by passing a Q-switched, mode
locked Nd:YAG laser of 1064 nm and pulse width of 8 ns (spot radius of 1 mm) on the powder sample of
LHPCL. The input laser beam was passed through an IR reflector and then directed on the microcrystalline
powdered sample. Photodiode detector and oscilloscope assembly detected the light emitted by the sample. The
SHG efficiency of the LHPCL crystal was evaluated by taking the microcrystalline powder of KDP as the
reference material. For a laser input pulse of 6.9 mJ, the SHG signal (532 nm) of 90 mV and 302 mV were
obtained for KDP and LHPCL samples respectively. Hence, it is observed that the SHG efficiency of LHPCL is
3.4 times higher than KDP.
3.4 Dielectric studies
Figure 6 shows the plot of dielectric constant (εr) versus applied frequency. The dielectric constant
has high values in the lower frequency region and then it decreases with the applied frequency. The very high
value of r at low frequencies may be due to the presence of all the four polarizations namely; space charge,
orientational, electronic and ionic polarization and its low value at higher frequencies may be due to the loss of
significance of these polarizations gradually. The variation of dielectric loss with frequency is shown in Figure
7. The characteristic of low dielectric loss with high frequency for a given sample suggests that the sample
possess enhanced optical quality with lesser defects and this parameter is of vital importance for nonlinear
optical materials in their application [5].
1 2 3 4 5 6 7
60
50
40
30
20
10
0
)
r
Dielectric constant (
Log f
Figure 6 Variation of dielectric constant with frequency
2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0
2.5
2.0
1.5
1.0
0.5
0.0
Dielectric Loss
Log f
Figure 7 Variation of dielectric loss with frequency
5. Investigations On The Structural, Optical And Dielectric Behavior Of L-Histidinium
IV. CONCLUSION
Good quality LHPCL single crystals are grown by slow evaporation technique in a period of 25 days.
X-ray diffraction studies confirmed that LHPCL crystal is Monoclinic in structure and belongs to P21 space
group. Interestingly, optical absorption studies indicate the minimum absorption in the entire visible region for
LHPCL. SHG efficiency is found to be better than KDP. It is found that both dielectric constant and loss
decrease with increase in frequency. Thus preliminary studies suggest that LHPCL is a promising nonlinear
material, which can be possibly used for photonics device fabrication.
REFERENCES
[1]. Sankar D, Vinay Raj Menon, P.Sagayaraj, J. Madhavan, Physica B, 405 (2010)192.
[2]. Sujatha T, A. Cyrac Peter, M. Vimalan, J. MerlineShyla, J. Madhavan,
30
Physica B, 405 (2010) 3365.
[3]. Roman P., Gutierrez-Zorrila J.M., Luque A. and Vegas A., J. Crystallogr. Spectrosc.Res. 17 (1987)
585.
[4]. Kurtz S.K. and Perry T.T. J. Appl. Phys., 39 (1968) 3798.
[5]. Madhavan. J, Aruna. S, Prabha. K, Packiam Julius. J, Ginson P. Joseph, Selvakumar. S, Sagayaraj. P.,
Journal of crystal growth, 293 (2006) 409.