Carpentry tools discussed in the document include hammers, plumb bobs, hand saws, tape measures, chisels, pliers, circular saws, power planers, and drills. A hammer is used to drive nails and fit parts. A plumb bob is a weighted line used as a vertical reference. Hand saws cut wood into shapes. Tape measures measure distance. Chisels and pliers are used for carving and holding objects. Circular saws cut materials using a spinning blade. Power planers smooth wood surfaces. Drills make holes using interchangeable bits.

1. CARPENTRY TOOLS
By:Robert T. Serino

2. What is carpentry?
 Carpentry is a skilled trade in which the primary work performed is the
cutting,shaping and installation of building materials during the construction of
buildings,ships,timber,bridge, concrete formwork,etc.

3. A hammer is a tool or device that delivers a blow to an
object. Most hammers are hand tools used to drive nails,
fit parts, forge metal, and break apart objects. Hammers
vary in shape, size, and structure depending on their
purposes.

4. A plumb bob, or plummet, is a weight,
usually with a pointed tip on the bottom,
suspended from a string and used as a
vertical reference line, or plumb-line. It is
essentially the vertical equivalent of a
"water level".

5. In woodworking and carpentry, hand saws,
also known as "panel saws", are used to cut
pieces of wood into different shapes.

6. A tape measure or measuring tape is a flexible ruler and
used to measure distance. It consists of a ribbon of cloth,
plastic, fibre glass, or metal strip with linear-measurement
markings. It is a common measuring tool.

7. A hose level is a simple device
that can provide an accurate
elevation comparison between
multiple points that rival each
other to be a county high point,
or to be the highest summit of a
major peak (and therefore the
summit that takes its
prominence). It is based on the
principle that if you fill a hose
with water and let it come to
rest, the water level at both ends
will be the same.

8. A chisel is a tool with a
characteristically shaped cutting edge
of blade on its end, for carving or
cutting a hard material such as wood,
stone, or metal by hand, struck with a
mallet, or mechanical power.

9. Pliers are a hand tool used to hold
objects firmly, possibly developed
from tongs used to handle hot metal
in Bronze Age Europe

10. A circular saw is a power-saw using a toothed or
abrasive disc or blade to cut different materials using a
rotary motion spinning around an arbor. A hole
saw and ring saw also use a rotary motion but are
different from a circular saw. Circular saws may also be
loosely used for the blade itself. Circular saws were
invented in the late 18th century and were in common use
in sawmills in the United States by the middle of the 19th
century.

11. The power planer is a hand-held
tool, but it operates like an
upside-down stationary jointer.
There's a cutter-head with a pair
of sharp knives that, like a plane
iron, removes shavings of stock.

12. A drill is a tool fitted with
a cutting tool attachment
or driving tool attachment,
usually a drill bit or driver
bit, used for making holes
in various materials or
driving screws.

13. Refrences
https://en.wikipedia.org/wiki/Hammer
www.cohp.org/hose_level.html
https://en.wikipedia.org/wiki/Plumb_bob
https://en.wikipedia.org/wiki/Hand_saw
https://en.wikipedia.org/wiki/Tape_measure
https://en.wikipedia.org/wiki/Chisel
https://en.wikipedia.org/wiki/Pliers
https://en.wikipedia.org/wiki/Circular_saw
https://www.familyhandyman.com/tools/power-tools/how...power-planer/view-all/
https://en.wikipedia.org/wiki/Drill

14.  Thank you for watching