This document provides information about carpentry tools and woodworking joints. It discusses various tools used in carpentry like rulers, try squares, marking gauges, saws, planes, mallets and wood lathes. It explains different types of saws including crosscut saws, rip saws, backsaws, compass saws and dovetail saws. It also describes common woodworking joints like halving joints, mortise and tenon joints, housing joints, corner joints, dowel joints and bridle joints.
This slide show accompanies the learner guide "Mechanical Technology Grade 10" by Charles Goodwin, Andre Lategan & Daniel Meyer, published by Future Managers Pty Ltd. For more information visit our website www.futuremanagers.net
Plumbing Tools
Plumbing tools help you clean drains, cut, bend and repair pipes, and install new equipment quickly and easily. A pipe cutter can slice through metal and PVC quickly and is available in several styles that can cut pipe up to 6 inches in diameter. A pipe wrench can remove or install piping under sinks, tubs and water heaters efficiently and comes in many models. A flaring tool will flare and swag steel, copper, brass and aluminum pipe up to + inches. A great selection of piping and tubing tools to suit every type of plumbing challenge.
Plumbing is any system that conveys fluids for a wide range of applications. Heating and cooling, waste removal, and potable water delivery are among the most common uses for plumbing however plumbing's not limited to these applications. Plumbing utilizes pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids.
More visit:- http://www.tradusway.com/hand-tools/plumbing-tools.html/
What is Plumbing Tool and work of Plumbing Tools.Tradusway12
There are many different tools that a plumber can use. Depending on the job and the location the tools can range from very small to very large. The types of tools depend on whether your installing or repairing as well.
In this presentation we will look at a typical plumbers tool kit. What you should have on hand for most basic jobs.
More visit:- http://www.tradusway.com/plumbing.html/
This slide show accompanies the learner guide "Mechanical Technology Grade 10" by Charles Goodwin, Andre Lategan & Daniel Meyer, published by Future Managers Pty Ltd. For more information visit our website www.futuremanagers.net
Plumbing Tools
Plumbing tools help you clean drains, cut, bend and repair pipes, and install new equipment quickly and easily. A pipe cutter can slice through metal and PVC quickly and is available in several styles that can cut pipe up to 6 inches in diameter. A pipe wrench can remove or install piping under sinks, tubs and water heaters efficiently and comes in many models. A flaring tool will flare and swag steel, copper, brass and aluminum pipe up to + inches. A great selection of piping and tubing tools to suit every type of plumbing challenge.
Plumbing is any system that conveys fluids for a wide range of applications. Heating and cooling, waste removal, and potable water delivery are among the most common uses for plumbing however plumbing's not limited to these applications. Plumbing utilizes pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids.
More visit:- http://www.tradusway.com/hand-tools/plumbing-tools.html/
What is Plumbing Tool and work of Plumbing Tools.Tradusway12
There are many different tools that a plumber can use. Depending on the job and the location the tools can range from very small to very large. The types of tools depend on whether your installing or repairing as well.
In this presentation we will look at a typical plumbers tool kit. What you should have on hand for most basic jobs.
More visit:- http://www.tradusway.com/plumbing.html/
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
1. University Visvesvaraya College of Engineering
Course Name: Workshop Practice
Course Code:21ESWS115
Dr.ARUNAM N
Department of Mechanical Engineering
Gmail:arunamn400@gmail.com
Phone Number:9164774565
2. Carpentry and joinery are common terms used with any class of work with wood.
Strictly speaking, carpentry deals with all works of carpentry such as roofs, floors, partitions, etc. of a
building
Joinery deals with the making of doors, windows, cupboards, dressers, stairs, and all the interior
fitments for a building
Structure of wood
Carpentry
3. Carpentry Tools
In order to successfully work different forms to accurate shapes and dimensions, the wood-worker must know
the use of a large number of tools
Rulers: Rules of various sizes and designs are used by woodworkers for measuring and setting out
dimensions, but they usually work with a four-fold box-wood rule ranging from 0 to 60 cm
Straight Edges: They are used for checking the flatness of mating machine surfaces, as a guide for making straight lines,
and when checking the straightness of other tools. The precision with which straight edges are made means that they can
be used to check or calibrate other tools that require a straight edge.
A try square or try-square is a woodworking tool used for marking and checking 90° angles on pieces of wood. The square
in the name refers to the 90° angle. To try a piece of wood is to check if the edges and faces are straight, flat, and square to
one another.
4. Carpentry Tools
Amiter square or mitre square is a hand tool used in woodworking and metalworking for marking and checking angles
other than 90°. Most miter squares are for marking and checking 45°
A sliding T bevel, also known as a bevel
gauge or false square is an adjustable gauge
for setting and transferring angles. Different
from the square, which is fixed and can only
set a 90° angle, the sliding T bevel can set any
angle and transfer it on another piece.
miter square or mitre square
bevel gauge
5. Carpentry Tools
A mortise gauge or mortice gauge is a woodworking tool
used by a carpenter or joiner to scribe mortise and tenon
joints on wood prior to cutting It has two protruding pins,
often called "spurs", which are designed to scribe parallel
lines marking both sides of a mortise at the same time.
A marking gauge, also known as a scratch
gauge, is used
and metalworking to
in woodworking
mark outlines for
cutting or other operations. The purpose of
the gauge is to scribe a line parallel to a
reference edge or surface
6. Carpentry Tools
There are many types of saws used in woodworking. Different types of woodworking hand saws are used for general handicrafts,
such as crosscut saw for cutting across the wood, backsaw for cutting angles inside the wood, dovetail saw for making dovetail
joints, compass saw for making for zigzag work on wooden planks
1. CROSSCUT HAND SAW:
This is the most widely used hand saw. It is 450 to 900 mm in (One and a half
feet to three feet), and the tip is gradually narrower than the handle. 5 to 6
teeth per inch, the teeth placed or set opposite each other.
2. RIP SA
W:
A rip saw is usually 400 to 600 mm. The apex becomes more
prolonged and narrower in terms of the handle. The number of teeth
per inch length is 5 to 6. The tooth’s tip (sharp edge) is at a right
angle (90 degrees) with the saw blade. T
7. Carpentry Tools
3. BACKSAW:
The backsaw is 250 to 300 mm (10 “-14”) in length and 75 mm (3 “) wide. It is relatively
small in size. Blades are bent in opposite directions, one after the other. This saw is
convenient to use for cutting angles inside the wood such as cutting dovetails, miters, or
tenons in cabinetry and joinery. This saw gives more precise cutting compared to other
types of saws.
4. COMPASS SAW:
Acompass saw is called a slender hand saw because its blade is very narrow and it
is 300 to 850 mm (12 “-18”) in length; The number of teeth is 10 to 12 per inch.
That means a larger blade and fewer teeth per inch. It can be fixed or retractable.
This saw is quite convenient for smooth work, especially for zigzag work on
wooden planks,
8. 5. COPING SAW:
It is a type of bow saw, more like a hacksaw. A coping saw is made by screwing a
thin saw blade with a U-shaped frame (teeth pointing towards the handle). A thin
hardened steel blade facilitates to change of the direction of the cut easily. You
can remove the blades by unscrewing the handle.
6. KNIFE OR KEYHOLE SAW:
This saw is made by inserting a thin and hard blade directly with a sleeve. It is narrower than the
compass saw. It is also called pad saw, alligator saw, jab saw or drywall saw. The blade can be fixed
or retractable
Carpentry Tools
9. Carpentry Tools
8. DOVETAILSA
W:
This is also a small and slender saw. These saws usually have around 15-20 teeth per
inch. It is a type of backsaws, smaller than tenon saws, designed for making fine work,
such as joint-making, particularly dovetail joints (a type of wood joints), where two
pieces of wood must fit together precisely.
9. PIT SAW:
A pit saw is used to cut whole trees or large logs. Its size is quite large, and four
people have to run holding it together. The saw is 2 meters (6.5 feet) long or
more, 300 mm (20 “) wide at the base, and 150 mm (6”) at the apex
10. HACKSAW:
Hack saw is mostly used in iron and metal factories, but if necessary, wood can be cut
easily. the frame and the blade are the two main parts of this saw. The frame is made of
steel. It has two pins on each side. A screw is attached to the pin on one side to adjust the
blade’s tension after attaching to the pin. The blade is 300 mm (12 “) long and 12.5 mm
(0.5”) wide. The number of teeth is 14 to 32 per inch.
15. Carpentry Tools
A jack plane is a general-purpose woodworking bench plane,
used for dressing timber down to size in preparation for
truing and/or edge jointing. It is usually the first plane used
on rough stock, but for rougher work, it can be preceded by
the scrub plane.
16. Carpentry Tools
A mallet is a tool used for imparting force on another object, often made of rubber or sometimes wood, that is
smaller than a maul or beetle, and usually has a relatively large head. ... Wooden mallets are usually used in carpentry
to knock wooden pieces together, or to drive dowels or chisels.
17. Carpentry Tools
Boring tools: Boring tools are frequently necessary to make round holes in wood, and they are selected
according to the type and purpose of the hole.
Gimlet Ratchet brace Wheel brace
19. Carpentry Tools
Scraper
Pincers are a hand tool used in many situations where the mechanical advantage is required to pinch, cut or pull an object.
Pincer
Cabinet screw diver Ratchet screwdriver
20. Wood Working lathe
The wood lathe is a piece of equipment designed to rotate a workpiece
around its axis to allow for rotational cutting, shaping and finishing.
The process is known as Woodturning and it is used to form and shape
a wide range of designs from rolling pins to instruments. The
workpiece is held between the headstock and tailstock, typical on a
spiked spur, or sometimes mounted on a base.
A live centre can be used at the tailstock to support & align the
workpiece centrally with the axis of the machine.
The accuracy of the centre is not as important as it is with a metal
lathe as the cutting tool is not fixed in place when in operation
33. Briddle Joint
Corner Joint Tee bridle Joint Mitre Faced Briddle Joint
This form of joint is really the reverse of the mortise and tenon joint and is often called the open mortise and tenon