Unit 2: Automation and control technologies in production system
Basic elements of an automated system, advanced automation functions, levels of automation, continuous and discrete control systems, computer process control, common measuring devices used in automation, desirable features for selection of measuring devices.
Automation in Manufacturing (Unit-1) by Varun Pratap Singh.pdfVarun Pratap Singh
Unit 1: Production systems
Categories of manufacturing systems, manufacturing support systems, automation in production systems, automated manufacturing systems, opportunities for automation and computerization, types of automation, computerized manufacturing support systems, reasons for automating, automation principles and strategies, the USA principle, ten strategies for automation, automation migration strategy.
Definition of Automation
Automated Manufacturing Systems
Types of Manufacturing Automation
Levels of Automation
Computerized Manufacturing Support Systems
Reasons for Automation
Automation Strategies-The USA Principle
Ten Strategies for Automation and Process Improvement
Automation Migration Strategy
Benefits of Automation
References
ANALYSIS OF TRANSFER LINE WITH BUFFER STORAGEManoj Gowda K
An automated transfer line is consisted of several workstations which are linked together by a material handling system where parts are transferred from one station to the next.
LCA is useful in activity releated to discrete manufacturing.Wide range of activity such as
Loading,Feeding,Clamping,Machining,Welding,Forming,Gauging,Assembly and Packing can be subjected to LCA system adoption.
Useful in processing industries for manufacturing chemicals, oils, or pharmaceuticals.
Automation in Manufacturing (Unit-1) by Varun Pratap Singh.pdfVarun Pratap Singh
Unit 1: Production systems
Categories of manufacturing systems, manufacturing support systems, automation in production systems, automated manufacturing systems, opportunities for automation and computerization, types of automation, computerized manufacturing support systems, reasons for automating, automation principles and strategies, the USA principle, ten strategies for automation, automation migration strategy.
Definition of Automation
Automated Manufacturing Systems
Types of Manufacturing Automation
Levels of Automation
Computerized Manufacturing Support Systems
Reasons for Automation
Automation Strategies-The USA Principle
Ten Strategies for Automation and Process Improvement
Automation Migration Strategy
Benefits of Automation
References
ANALYSIS OF TRANSFER LINE WITH BUFFER STORAGEManoj Gowda K
An automated transfer line is consisted of several workstations which are linked together by a material handling system where parts are transferred from one station to the next.
LCA is useful in activity releated to discrete manufacturing.Wide range of activity such as
Loading,Feeding,Clamping,Machining,Welding,Forming,Gauging,Assembly and Packing can be subjected to LCA system adoption.
Useful in processing industries for manufacturing chemicals, oils, or pharmaceuticals.
COMPUTER AIDED PROCESS PLANNING (CAPP)KRUNAL RAVAL
Computer-aided process planning (CAPP) helps determine the processing steps required to make a part after CAP has been used to define what is to be made. CAPP programs develop a process plan or route sheet by following either a variant or a generative approach.
Adaptive Control Machining systems, Introduction, Where to use adaptive control ?.Adaptive Control, Elements of an adaptive control machining system, Types of Adaptive controls, Benefits of AC
Sections:
1. Fundamentals of Manual Assembly Lines
2. Analysis of Single Model Assembly Lines
3. Line Balancing Algorithms
4. Mixed Model Assembly Lines
5. Workstation Considerations
6. Other Considerations in Assembly Line Design
7. Alternative Assembly Systems
It describes about automation its components and architecture. It includes following contents namely Introduction, History, Mechanization vs. automation, Role of automation in industry, Types of production systems, Types of automation, Architecture of automation, Automation control system & Sensors and actuators
More economical automation is not so good at initial stage hence step wise automation need to be done to replace human work with automation, which defines need for low cost automation in india
Automation in Manufacturing (Unit-4) by Varun Pratap Singh.pdfVarun Pratap Singh
Unit 4: Production and assembly systems
Automated production lines- fundamentals, system configurations, work part transfer mechanisms, storage buffers, control of production line, applications. Automated assembly systems- fundamentals, system configurations, parts delivery at work stations, applications.
Automation in Manufacturing (Unit-3) by Varun Pratap Singh.pdfVarun Pratap Singh
Unit 3: Material handling system
Material handling equipment, design considerations for material handling system, material transport equipment, analysis of material transport systems, storage systems and their performance and location strategies, conventional and automated storage systems, overview of automatic identification and data capture, bar code technology, RFID, other AIDC technologies.
COMPUTER AIDED PROCESS PLANNING (CAPP)KRUNAL RAVAL
Computer-aided process planning (CAPP) helps determine the processing steps required to make a part after CAP has been used to define what is to be made. CAPP programs develop a process plan or route sheet by following either a variant or a generative approach.
Adaptive Control Machining systems, Introduction, Where to use adaptive control ?.Adaptive Control, Elements of an adaptive control machining system, Types of Adaptive controls, Benefits of AC
Sections:
1. Fundamentals of Manual Assembly Lines
2. Analysis of Single Model Assembly Lines
3. Line Balancing Algorithms
4. Mixed Model Assembly Lines
5. Workstation Considerations
6. Other Considerations in Assembly Line Design
7. Alternative Assembly Systems
It describes about automation its components and architecture. It includes following contents namely Introduction, History, Mechanization vs. automation, Role of automation in industry, Types of production systems, Types of automation, Architecture of automation, Automation control system & Sensors and actuators
More economical automation is not so good at initial stage hence step wise automation need to be done to replace human work with automation, which defines need for low cost automation in india
Automation in Manufacturing (Unit-4) by Varun Pratap Singh.pdfVarun Pratap Singh
Unit 4: Production and assembly systems
Automated production lines- fundamentals, system configurations, work part transfer mechanisms, storage buffers, control of production line, applications. Automated assembly systems- fundamentals, system configurations, parts delivery at work stations, applications.
Automation in Manufacturing (Unit-3) by Varun Pratap Singh.pdfVarun Pratap Singh
Unit 3: Material handling system
Material handling equipment, design considerations for material handling system, material transport equipment, analysis of material transport systems, storage systems and their performance and location strategies, conventional and automated storage systems, overview of automatic identification and data capture, bar code technology, RFID, other AIDC technologies.
In the last decades, industrial automation has become a driving force in all production systems. Technologies and architectures have
emerged alongside the growing organizational structures of production plants. Industrial automation plays an important role in industrial and manufacturing environment. Industrial automation means automatically control of industrial appliances which save money, time also reduce human efforts. Automation devices such as controllers and data systems and/or services. Systems and methods are provided that receive statements or other unit of data interaction from an automation device, provide the statements to an appropriate system or service for processing, and optionally return a response such as a result set. In this paper brief study about the automation, level of automation, Industrial automation and types of industrial automation etc.
Automation in Manufacturing (Unit-6) by Varun Pratap Singh.pdfVarun Pratap Singh
Unit 6: Flexible manufacturing systems
Introduction to FMS, types of FMS, FMS components, applications and benefits, planning and implementation issues in FMS, quantitative analysis of FMS.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Application of PLC’s for Automation of Processes in IndustriesIJERA Editor
Several industries utilize sequential industrial process which is respective in nature. For such processes
industries have to depend upon use of relays, stepping drum, timers and controls, considerable difficulties
experienced in reprogramming necessitated due to change in the nature of production. Often the whole system
has to be scrapped and a redesigning is required. To overcome these problems PLC control system was
introduced. The PLC can be described as a control ladder comprising a sequence program. PLC sequence
program consists of normally open and normally closed contacts connected in parallel or in series. It also has
relay coils, which turns ON and OFF as the state of these contacts change. In this paper, about all aspects of
these powerful and versatile tools and its applications to process automation has been discussed.
Automation in Manufacturing (Unit-5) by Varun Pratap Singh.pdfVarun Pratap Singh
Unit 5: Cellular manufacturing
Group technology, part families, parts classification and coding, production flow analysis, Opitz coding system, composite part concept, machine cell design, applications of GT.
ncreased automation can help the pharmaceutical industry make more efficient usage of energy and raw materials; improve safety in working conditions; enhance regulatory compliance, and improve both product quality and consistency.
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements
UNIT-5
Stress and Strain Analysis Simple stress and strain: Introduction, Normal shear stresses, Stress-strain diagrams for ductile and brittle materials, Elastic constants, One dimensional loading of members of varying cross section, Strain energy, Thermal stresses.
Compound stress and strains: Introduction, State of plane stress, Principal stress and strain, Mohr’s circle for stress and strain.
Pure Bending of Beams: Introduction, Simple bending theory, Stress in beams of different cross sections.
Torsion: Introduction, Torsion of Shafts of circular section, Torque and Twist, Shear stress due to Torque.
Basic mechanical engineering (BMET-101/102) unit 5 part-1 simple stress and ...Varun Pratap Singh
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements
UNIT-5
Stress and Strain Analysis Simple stress and strain: Introduction, Normal shear stresses, Stress-strain diagrams for ductile and brittle materials, Elastic constants, One dimensional loading of members of varying cross section, Strain energy, Thermal stresses.
Compound stress and strains: Introduction, State of plane stress, Principal stress and strain, Mohr’s circle for stress and strain.
Pure Bending of Beams: Introduction, Simple bending theory, Stress in beams of different cross sections.
Torsion: Introduction, Torsion of Shafts of circular section, Torque and Twist, Shear stress due to Torque.
Basic mechanical engineering (BMET-101/102) unit 4- part1 (force system and a...Varun Pratap Singh
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements
Unit-4 Part -1
Force system and Analysis
Basic concept: Review of laws of motion, transfer of force to parallel position, resultant of planer force system, Free-Body Diagrams, Equilibrium. Friction: Introduction, Laws of Coulomb friction, Equilibrium of bodies involving dry fiction.
Basic mechanical engineering (BMET-101/102) unit 4- part 3 (truss) by varun p...Varun Pratap Singh
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements (Copy URL)
Unit-4 Part-3
Trusses: Introduction, Simple Trusses, Determination of forces in simple truss members, Method of Joints and Method of section.
Basic mechanical engineering (BMET-101/102) unit 4- part 2 (beams) by varun p...Varun Pratap Singh
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements (Copy URL)
Unit4 Part-2
Force system and Analysis
Basic concept: Review of laws of motion, transfer of force to parallel position, resultant of planer force system, Free Body Diagrams, Equilibrium. Friction: Introduction, Laws of Coulomb friction, Equilibrium of bodies involving dry fiction.
Basic mechanical engineering (BMET-101/102) unit 3 (part-1) Properties of ste...Varun Pratap Singh
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements (Copy URL)
Unit-3 Part-1
Properties of steam: Properties of steam, Phase transformation process and its graphical representation on P-V, T-V& T-s diagram, Mollier diagram and Steam Tables, Processes involving steam in closed and open systems.
Introduction to I.C. Engines: Two & four stoke S.I. and C.I. engines. Otto cycle, Diesel cycle, Dual cycle.
Basic mechanical engineering (BMET-101/102) unit 2 numerical by Varun Pratap ...Varun Pratap Singh
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements (Copy URL)
UNIT-2: Zeroth law: Zeroth law, Different temperature scales and temperature measurement First law: First law of thermodynamics. Processes flow and non-flow, Control volume, Flow work and non-flow work, Steady flow energy equation, unsteady flow systems and their analysis. Second law: Limitations of first law of thermodynamics, Essence of second law, Thermal reservoir, Heat engines. COP of heat pump and refrigerator. Statements of second law and their equivalence, Carnot cycle, Carnot theorem, Thermodynamic temperature scale, Clausius inequality. Concept of entropy.
Basic mechanical engineering(BMET-101/102) unit 2 (part-2) thermodynamics law...Varun Pratap Singh
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements (Copy URL)
UNIT-2: Part-2
Zeroth law: Zeroth law, Different temperature scales and temperature measurement
First law: First law of thermodynamics. Processes flow and non-flow, Control volume, Flow work and non-flow work, Steady flow energy equation, unsteady flow systems and their analysis.
Second law: Limitations of first law of thermodynamics, Essence of second law, Thermal
reservoir, Heat engines. COP of heat pump and refrigerator. Statements of second law and their equivalence, Carnot cycle, Carnot theorem, Thermodynamic temperature scale, Clausius
inequality. Concept of entropy.
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements (Copy URL)
UNIT-2: Part-1
Zeroth law: Zeroth law, Different temperature scales and temperature measurement
First law: First law of thermodynamics. Processes flow and non-flow, Control volume, Flow work and non-flow work, Steady flow energy equation, unsteady flow systems and their analysis.
Second law: Limitations of first law of thermodynamics, Essence of second law, Thermal
reservoir, Heat engines. COP of heat pump and refrigerator. Statements of second law and their equivalence, Carnot cycle, Carnot theorem, Thermodynamic temperature scale, Clausius
inequality. Concept of entropy.
Power plant engineering unit 3 notes by Varun Pratap SinghVarun Pratap Singh
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements (Copy URL)
Unit-3
Diesel power plant
General layout, performance of diesel engine, fuel system, lubrication system, air intake and admission system, supercharging system, exhaust system, diesel plant operation and efficiency, heat balance.
Gas turbine power plant
Elements of gas turbine power plants, Gas turbine fuels, cogeneration, auxiliary systems such as fuel, controls and lubrication, operation and maintenance, Combined cycle power plants.
Power plant engineering unit 2 notes by Varun Pratap SinghVarun Pratap Singh
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements (Copy URL)
SYLLABUS
Unit-II
Steam power plant
Power plant boilers including critical and super critical boilers. Fluidized bed boilers, boilers
mountings and accessories.
General layout of steam power plant. Different systems such as fuel handling system,
pulverizes and coal burners, combustion system, draft, ash handling system, feed water
treatment and condenser and cooling system, turbine auxiliary systems such as governing, feed
heating, reheating, flange heating and gland leakage.
Operation and maintenance of steam power plant, heat balance and efficiency.
Download Link: https://sites.google.com/view/varunpratapsingh/teaching-engagements (Copy URL)
1. To study the Cochran, Locomotive Fire-Tube Boiler, and Babcock & Wilcox Boilers.
2. To study the working & function of mountings and accessories in boilers.
3. To study 2-Stroke & 4-Stroke diesel engines.
4. To study 2-Stroke & 4-Stroke petrol engines.
5. To prepare a stress-strain diagram for mild steel and cast iron specimens under tension and compression respectively on a U.T.M.
6. To determine the Rockwell hardness no. of a specimen on the respective machines.
7. To determine the Brinell hardness no. of a specimen on the respective machines.
8. To determine the Impact strength of a specimen in the Izod & Charpy Test.
9. Study of refrigerator and refrigeration cycle
10. Study of Air Conditioner and its components
Free Download Link (Copy URL):
https://sites.google.com/view/varunpratapsingh/teaching-engagements
Unit-I
Part-1 Introduction
Power and energy, sources of energy, review of thermodynamic cycles related to power plants,
fuels and combustion, calculations.
Part-2 Variable Load Problem
Industrial production and power generation compared ideal and realized load curves, terms, and factors. Effect of variable load on power plan operation, methods of meeting the variable load problem.
Part-3 Power plant economics and selection Effect of plant type on costs, rates, fixed elements, energy elements, customer elements, and investor’s profit; depreciation and replacement, theory of rates. Economics of plant selection, other considerations in plant selection.
Basic mechanical engineering unit 1 thermodynamics by varun pratap singh (202...Varun Pratap Singh
Free Download Link (Copy URL):
https://sites.google.com/view/varunpratapsingh/teaching-engagements
Notes for Basic mechanical engineering subject unit 1 thermodynamics for Uttarakhand Technical University
Unit 2: BASIC MECHANICAL ENGINEERING by varun pratap singhVarun Pratap Singh
Free Download Link (Copy URL):
https://sites.google.com/view/varunpratapsingh/teaching-engagements
UNIT-2:
Zeroth law: Zeroth law, Different temperature scales and temperature measurement
First law: First law of thermodynamics. Processes - flow and non-flow, Control volume, Flow work and non-flow work, Steady flow energy equation, Unsteady flow systems and their analysis.
Second law: Limitations of first law of thermodynamics, Essence of second law, Thermal reservoir, Heat engines. COP of heat pump and refrigerator. Statements of the second law and their equivalence, Carnot cycle, Carnot theorem, Thermodynamic temperature scale, Clausius inequality. Concept of entropy.
Unit 1 thermodynamics by varun pratap singh (2020-21 Session)Varun Pratap Singh
Free Download Link (Copy URL):
https://sites.google.com/view/varunpratapsingh/teaching-engagements
Dear Students,
Please find the Basic Mechanical Engineering (TME-101, 2020-21 Session) Unit One notes in this section.
Topic cover in this section are:
UNIT-1: Fundamental Concepts and Definitions
Definition of thermodynamics, System, Surrounding and universe, Phase, Concept of continuum, Macroscopic & microscopic point of view. Density, Specific volume, Pressure, temperature. Thermodynamic equilibrium, Property, State, Path, Process, Cyclic and non-cyclic processes, Reversible and irreversible processes, Quasi-static process, Energy and its forms, Enthalpy.
Free Download Link (Copy URL):
https://sites.google.com/view/varunpratapsingh/teaching-engagements
Unit I :
Materials : Classification of engineering material, Composition of Cast iron and Carbon steels, Iron Carbon diagram. Alloy steels their applications. Mechanical properties like strength, hardness, toughness, ductility, brittleness, malleability etc. of materials, Tensile test- Stress-strain diagram of ductile and brittle materials, Hooks law and modulus of elasticity, Hardness and Impact testing of materials, BHN, etc.
Basic Mechanical Engineering Unit 5 Reciprocating Machine@by V.P.SinghVarun Pratap Singh
Download Link (Copy URL):
https://sites.google.com/view/varunpratapsingh/teaching-engagements
Basic Mechanical Engineering Unit 5 Reciprocating Machine@by V.P.Singh
Unit V:
Reciprocating Machines :
Working principle of steam Engine, Carnot, Otto, Diesel, and Dual cycles P-V & T-S diagrams and its efficiency, working of Two-stroke & Four-stroke Petrol & Diesel engines. Working principle of the compressor.
Basic Mechanical Engineering Unit 4 Thermodynamics@by V.P.SinghVarun Pratap Singh
Download Link (Copy URL):
https://sites.google.com/view/varunpratapsingh/teaching-engagements
Basic Mechanical Engineering Unit 4 Thermodynamics for B.Tech. First-year students
Unit IV:
Thermodynamics: Thermodynamic system, properties, state, process, Zeroth, First and second law of thermodynamics, thermodynamic processes at constant pressure, volume, enthalpy & entropy.
Steam Engineering: Classification and working of boilers, mountings, and accessories of boilers, steam properties, use of steam tables, P-V, T-S diagram
PPT format for first defending of B.Tech. final year project (All Branches)Varun Pratap Singh
Download Link (Copy URL):
https://sites.google.com/view/varunpratapsingh/teaching-engagements
Dear students,
Please download sample PPT from this section, which having guidelines for title page as well as specific about content which must be cover during your first defending for your proposed project topic and area of work.
Please be specific about your work and topic and strictly follow the guidelines.
Read all instructions carefully, follow the uniformity while preparing PPT.
Introduction/ Basics Details (Use pyramided approach to reach project topic- general discussion to specific discussion about project topic and areas)
Specific Introduction and details of Project Topic
Working with the Schematic Diagram and Figures
Literature Review (Tabular Format)
Gap Analysis
Objective Function (Specific about work)
Theory and Fundamentals
Parameters and range selection
Methodology (Venn Diagram)
Pert/Gantt Chart (by using MS-office/ Open Office/ MS- Excel)
Reference Setup CAD Design/ Drawing
Model Making
Market Survey and Bill of Material (Expected expenditure)
Details and specification of equipment’s used in calibration, measurement and data collection
Real Scale Setup Construction/Fabrication and Installation
Calibration and Error Rectification
Reference Plat Testing procedure
Testing
Data Collection
Data Analysis
Findings and Results in graphical formats
Conclusion and Future Scope
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
2. Disclaimer
This document does not claim any originality and cannot be used as a substitute for prescribed textbooks. The
information presented here is merely a collection by the subject faculty members for their respective teaching
assignments, research articles, subject books, and any other sources of information. Various sources, as mentioned on
each slides or at the end of the document as well as freely available material from the internet, were consulted for
preparing this document. The ownership of the information lies with the respective authors or institutions. Further, this
document is not intended to be used for commercial purposes and the subject faculty members are not accountable for
any issues, legal or otherwise, arising out of the use of this document. The subject faculty members make no
representations or warranties concerning the accuracy or completeness of the contents of this document and
specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. The subject faculty
members shall be liable for any loss of profit or any other commercial damages, including but not limited to special,
incidental, consequential, or other damages.
3. Content
1. Basic elements of an automated system
2. Advanced automation functions
3. Levels of automation
4. Continuous and discrete control systems
5. Computer process control
6. Common measuring devices used in automation
7. Desirable features for selection of measuring devices.
4. Syllabus
Unit 1: Production systems Lectures
Categories of manufacturing systems, manufacturing support systems, automation in production systems, automated
manufacturing systems, opportunities for automation and computerization, types of automation, computerized manufacturing
support systems, reasons for automating, automation principles and strategies, the USA principle, ten strategies for automation,
automation migration strategy.
8
Unit 2: Automation and control technologies in production syste Lectures
Basic elements of an automated system, advanced automation functions, levels of automation, continuous and discrete
control systems, computer process control, common measuring devices used in automation, desirable features for
selection of measuring devices.
8
Unit 3: Material handling system Lectures
Material handling equipment, design considerations for material handling system, material transport equipment, analysis of
material transport systems, storage systems and their performance and location strategies, conventional and automated storage
systems, overview of automatic identification and data capture, bar code technology, RFID, other AIDC technologies.
8
Unit 4: Production and assembly systems Lectures
Automated production lines- fundamentals, system configurations, work part transfer mechanisms, storage buffers, control of
production line, applications. Automated assembly systems- fundamentals, system configurations, parts delivery at work
stations, applications.
8
Unit 5: Cellular manufacturing Lectures
Group technology, part families, parts classification and coding, production flow analysis, Opitz coding system, composite part
concept, machine cell design, applications of GT
7
Unit 6: Flexible manufacturing systems Lectures
Introduction to FMS, types of FMS, FMS components, applications and benefits, planning and implementation issues in FMS,
6
5. Suggested Text/Reference Books
Text Book:
1. Mikell P. Groover, Automation, Production Systems, and Computer-integrated Manufacturing,
prentice Hall.
Reference Book:
1. Theory of Automation of Production Planning and of Tooling: Algorithms for Designing
Machine Tools in Automated Industrial Plants, By G. K. Goranskiĭ"
2. Serope Kalpakjian and Steven R. Schmid, Manufacturing – Engineering and
Technology, 7th Edition, Pearson.
3. Yoram Koren, Computer control of manufacturing system, 1st edition.
4. Ibrahim Zeid , CAD/CAM : Theory & Practice, 2nd edition.
MOOC:
Automation in Manufacturing - NPTEL Online Courses:
1. https://onlinecourses.nptel.ac.in/noc21_me120/preview
2. https://nptel.ac.in/courses/112103293
3. https://elearn.nptel.ac.in/shop/nptel/automation-in-manufacturing/
Video Lectures:
1. YouTube Channel: Real Pars; https://www.youtube.com/c/realpars
6. Basic elements of an automated system
• Automation is the technology by which a process or procedure is accomplished without human assistance.
• It is implemented using a program of instructions combined with a control system that executes the
instructions, to automate a process. power is required, both to drive the process itself and to operate the
program and control system.
• Although automation can be applied in a wide variety of areas, it is most closely associated with the
manufacturing industries.
• It was in the context of manufacturing that the term was originally coined by an engineering manager at
Ford Motor Company in 1946 to describe the variety of automatic transfer devices and feed mechanisms that
had been installed in Ford's production plants.
It is ironic that nearly all modern applications of automation are controlled by computer
technologies that were not available in 1946.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
7. Basic elements of an automated system
Automation and control technologies in the production system.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
8. Basic elements of an automated system
An automated system consists of three basic elements:
(1) Power to accomplish the process and operate the system.
(2) A program of instructions to direct the process
(3) A control system to actuate the instructions.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
9. Basic elements of an automated system
(1) Power to accomplish the process and operate the system.
An automated system is used to operate some process, and power is required to drive the process; as well as the controls. The principal source
of power in automated systems is electricity. Electric power has many advantages in automated as well as non-automated processes:
• Electrical power is widely available at moderate cost. It is an important part of our industrial infrastructure
• Electrical power can be readily converted 10 alternative energy forms: mechanical, thermal, light, acoustic, hydraulic, and pneumatic.
• Electrical power at low levels can be used to accomplish functions such as sigl1al transmission, information processing, and data storage and
communication.
• Electrical energy can be stored in long-life batteries for use in locations where an external source of electrical power is not conveniently
available.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
10. Basic elements of an automated system
(1) Power to accomplish the process and operate the system.
Power for the Process:
In production, the term process refers to the manufacturing operation that is performed on a work unit. In Table 3.1, a list of
common manufacturing processes is compiled along with the form of power required and the resulting action on the work unit.
Most of the power in manufacturing plants is consumed by these kinds of operations, The "power form" indicated in the middle
column of the table refers to the energy that is applied directly to the process. As indicated above, the power source for each
operation is usually converted from electricity.
In addition to driving the manufacturing process itself, power is also required for the following material handling functions.
Loading and unloading the work unit:
All of the processes listed in Table 3.1 are accomplished on discrete parts. These parts must be moved into the proper
position.
Material transport between operations:
In addition to loading and unloading at a given operation. the work units must be moved between operations.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
11. Basic elements of an automated system
(1) Power to accomplish the process and operate the
system.
Power for Automation. Above and beyond the basic
power requirements for the manufacturing operation,
additional power is required for automation. The
additional power is used for the following functions:
• Controller unit: Modern industrial controllers are
based on digital computers, which require electrical
power to read the program of instructions, make the
control calculations, and execute the instructions by
transmitting the proper commands to the actuating
devices.
• Power to actuate control signal: The commands sent
by the controller unit are carried out by means of
electromechanical devices, such as switches and
motors, called actuators. The commands are generally
transmitted by means of low-voltage control signals. To
accomplish the commands, the actuators require more
power, and so the control signals must he amplified to
provide the proper power level for the actuating device.
• Data acquisition and information processing. In
most control systems, data must be collected from the
process and used as input to the control algorithms. In
addition, a requirement of the process may include
keeping records of process performance or product
quality. These data acquisition and record keeping
functions require power, although in modest amounts.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
12. Basic elements of an automated system
(2) A program of instructions to direct the process
The actions performed by an automated process arc defined by a program of instructions Whether the manufacturing
operation involves low, medium, or high production, each part or product style made in the operation requires one or more
processing steps that are unique to that style, These processing steps are performed during a work cycle. A new part is
completed during each work cycle. The particular processing steps for the work cycle are specified in a work cycle program.
Work cycle programs are called part programs in numerical control.
Work Cycle Programs: In the simplest automated processes, the work cycle consists of essentially one step, which is to
maintain a single process parameter at a defined level, for example, maintain the temperature of a furnace at a designated
value for the duration of a heat treatment cycle.
An extension of this simple case is when the single-step process is defined by more than one process parameter, for
example, a furnace in which both temperature and atmosphere are controlled.
In more complicated systems, the process involves a work cycle consisting of multiple steps that are repeated with no
deviation from one cycle to the next. Most discrete part manufacturing operations are in this category A typical sequence of
steps (simplified) is:
(1) load the part into the production machine,
(2) perform the process, and
(3) unload the part.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
13. Basic elements of an automated system
(2) A program of instructions to direct the process
Decision-Making in the Programmed Work Cycle. In our previous discussion of automated work cycles. the only two features of
the work cycle are (I) the number and Sequence of processing steps and (2) the process parameter changes in each step. Each work
cycle consists of the same steps and associated process parameter changes with no variation from one cycle to the next. The
program of instructions is repealed each work cycle without deviation. In fact, many automated manufacturing operations require
decisions to be made during the programmed work cycle to cope with variations in the cycle. To many cases, the variations are
routine elements of the cycle, and the corresponding instructions for dealing with them are incorporated into the regular part
program. These cases include:
Operator interaction. Although the program of instructions is intended to be carried out without human interaction, the controller
unit may require input data from a human operator in order to function. For example, in an automated engraving operation, the
operator may have t0 enter the alphanumeric characters that are to be engraved on the work unit ( eg. plaque, trophy, belt buckle).
Having entered the characters, the engraving operation is accomplished automatically by the system. (An everyday example of
operator interaction with an automated system is a bank Customer using an automated teller machine. The customer must enter the
codes indicating what transaction is to be accomplished by the teller machine.)
• Different part or product styles processed by the System. In this instance, the automated system is programmed to perform
different work cycles on different part or product styles. An example is an industrial robot that performs a series of spot welding
operations on car bodies in a final assembly plant. These plants are often designed to build different body styles on the same
automated assembly line, such as two-door and four-door sedans. As each car body enters a given welding station on the line,
sensors identify which style it is, and the robot performs the correct series of welds for that style.
• Variations in the standing work units. In many manufacturing operations the starting work units are not consistent. A good
example is a sand casting as the starting work unit in a machining operation. The dimensional variations in the raw castings
sometimes necessitate an extra machining pass to bring the machined dimension to the specified value. The part program must be
coded to allow for the additional pass when necessary
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
14. Basic elements of an automated system
(3) control system to actuate the instructions.
The control element of the automated system executes the program of instructions. The control system causes the process to
accomplish its defined function. which for our purpose is to carry out some manufacturing operation. Let us provide a brief
introduction to control systems here. The following chapter describes this important industrial technology in mare detail.
The controls in an automated system can be either closed loop or open loop. A closed loop control system, also known as a
feedback control system. is one in which the output variable is compared with an input parameter, and any difference
between the two is used to drive the output into agreement with the input.
A closed loop control system consists of six basic elements:
(I) input parameter,
(II) process,
(III)output variable,
(IV)feedback sensor
(V) controller. and
(VI)actuator.
Figure: A feedback control system
Figure: An open loop control system.
15. Advanced automation functions
In addition to executing work cycle programs, an automated system may be capable of executing advanced functions that
are not specific to a particular work unit. In general, the functions are concerned with enhancing the performance and safety
of the equipment. Advanced automation functions include the following:
(1) safety monitoring,
(2) maintenance and repair diagnostics, and
(3) error detection and recovery.
Advanced automation function are made possible by special subroutines included in the program of instructions. In some
cases, the functions provide information only and do not involve any physical actions by the control system, A
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
16. Advanced automation functions
1. Safety monitoring:
One of the significant reasons for automating a manufacturing operation is to remove workers from a hazardous
working environment. An automated system is often installed to perform a potentially dangerous operation that
would otherwise be accomplished manually by human workers '.However, even in automated systems. workers
are still needed to service the system. at periodic time intervals If not full-time. Accordingly it is important that
the automated system be designed to operate safely when workers arc in attendance. In addition it is essential
that the automated system carry out its process in a way that is not self-destructive. Thus. there are two reasons
for providing an automated system with a safety monitoring capability:
(1) to protect human workers in the vicinity of the system and
(2) To protect the equipment associated with the system.
The safety monitoring system is programmed to respond to unsafe conditions in some appropriate way. Possible
responses to various hazards might include one or more of the following:
• complete stoppage of the automated system
• sounding an alarm
• reducing the operating speed of the process
• taking corrective actions to recover from the safety violation
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
17. Advanced automation functions
1. Safety monitoring:
The following list suggests some of the possible sensors and their applications for safety monitoring:
• Limit switches to detect proper positioning of a part in a work holding device so that the processing cycle can
begin.
• Photoelectric sensors triggered by the interruption of a light beam; this could be used to indicate that a part is
in the proper position or to detect the presence of a human intruder into the work cell.
• Temperature sensors to indicate that a metal work part is hot enough to proceed with a hot forging operation. If
the work part is not sufficiently heated, then the metal's ductility may be too low, and the forging dies might be
damaged during the operation.
• Heat or smoke detectors to sense fire hazards.
• Pressure-sensitive floor pads to detect human intruders into the work cell
• Machine vision systems to supervise the automated system and its surroundings
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
18. Advanced automation functions
2. Maintenance and repair diagnostics:
Modem automated production systems are becoming increasingly complex and sophisticated, thus complicating
the problem of maintaining and repairing them. Maintenance and repair diagnostics refers to the capabilities of an
automated system to assist in the identification of the source of potential or actual malfunctions and failures of
the system. Three. modes of operation are typical of a modern maintenance and repair diagnostics subsystem
i. Status monitoring: In the status, monitoring mode, the diagnostic subsystem monitor and records the status of
key sensors and parameters of the system during normal operation. On request, the diagnostics subsystem can
display any of these values and provide an interpretation of current system status, perhaps warning of an
imminent failure.
ii. Failure diagnostics: The failure diagnostics mode is invoked when a malfunction or failure occurs. Its
purpose is to interpret the current values of the monitored variables and to analyze the recorded values preceding
the failure so that the cause of the failure can be identified
iii. Recommendation of repair procedure: the third mode of operation. the subsystem provides a recommended
procedure to the repair crew as to the steps that should be taken to effect repairs. Methods for developing the
recommendations are sometimes based on the use of expert systems in which the collective judgments of many
repair experts arc pooled and incorporated into a computer program that uses artificial intelligence techniques.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
19. Advanced automation functions
3. Error detection and recovery
In the operation of any automated system, there are hardware malfunctions and unexpected events that occur during
operation. These events can result in costly delays and loss of production until the problem has been corrected and
regular operation is restored. Traditionally. equipment malfunctions are corrected by human workers, perhaps with the aid
of a maintenance and repair diagnostics subroutine. With the increased use of computer control for manufacturing
processes, there is a trend toward using the control computer not only to diagnose the malfunctions but also to
automatically take the necessary corrective action to restore the system to normal operation. The term error detection and
recovery is used when the computer performs these functions.
As indicated by the term error detection and recovery consists
of two steps: (1) error detection and (2) error recovery.
The two main design problems in error detection are:
(1) to anticipate all of the possible errors that can occur in a
given process and
(2) to specify the appropriate sensor systems and associated
interpretive software so that the system is capable of
recognizing each error.
Solving the first problem requires a systematic evaluation of
the possibilities under each of the three error classifications. If
the error has not been anticipated, then the error detection
subsystem cannot correctly detect and identify it.
20. Advanced automation functions
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
21. Levels of automation
The concept of automated systems can be applied to various levels of factory operations.
One normally associates automation with the individual production machines.
However, the production machine itself made up of subsystems that may themselves be
automated.
For example: one of tile important automation technologies we discussed earlier is
numerical control. A modern numerical control (NC) machine tool is an automated
system. However, the NC machine itself is composed of multiple control systems. Any
NC machine has at least two axes of motion, and some machines have up to five axes.
Each of these axes operates as a positioning system, and itself an automated system.
Similarly, a NC machine is often part of a larger manufacturing system, and the larger
system may itself be automated.
For example, two or three machine tools may be connected by an automated pact handling
system operating under computer control. The machine tools also receive instructions
(e.g., part programs) from the computer. Thus we have three levels of automation and
control included here (the positioning system level, the machine tool level, and the
manufacturing system level). For our purposes, we can identify five possible levels of
automation in a production plant.
1. Device level.
2. 2. Machine level
3. Cell or system level.
4. Plum level.
5. Enterprise level.
22. Levels of automation
https://www.youtube.com/watch?v=IAhxYsMi4e8
M. Rahman, A. D. Fentaye, V. Zaccaria, I. Aslanidou, E. Dahlquist, and K. Kyprianidis, "A
Framework for Learning System for Complex Industrial Processes", in AI and Learning
Systems - Industrial Applications and Future Directions. London, United Kingdom:
IntechOpen, 2021 [Online]. Available: https://www.intechopen.com/chapters/74393 doi:
10.5772/intechopen.92899
25. Levels of automation
For our purposes in this text, we can identify five possible levels of automation in a production plant.
1. Device level. This is the lowest level in our automation hierarchy. It includes the actuators, sensors, and other hardware
components that comprise the machine level.
The devices are combined into the individual control loops of the machine; for example, the feedback control loop for one axis
of a CNC machine or one joint of an industrial robot.
2. Machine level. Hardware at the device level is assembled into individual machines. Examples include CNC machine tools
and similar production equipment, industrial robots, powered conveyors, and automated guided vehicles. Control functions at
this level include performing the sequence of steps in the program of instructions in the correct order and making sure that
each step is properly executed.
3. Cell or system level. This is the manufacturing cell or system level, which operates under instructions from the plant level. A
manufacturing cell or system is a group of machines or workstations connected and supported by a material handling system,
computer. and other equipment appropriate to the manufacturing process. Production lines arc included in this level. functions
include part dispatching and machine loading. coordination among machines and material handling system, and collecting and
evaluating inspection data.
4. Plum level. This is the factory or production systems level. It receives instructions from (he corporate information system
and translates them into operational plans for production. Likely functions include: order processing, process planning,
inventory control, purchasing, material requirements planning, shop floor control, and quality control.
5. Enterprise level. This is the highest level consisting of the corporate information system. It is concerned with all of the
functions necessary to manage the company: marketing and sales, accounting, design, research, aggregate planning, and master
production scheduling.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
26. Continuous and discrete control systems
Industrial control systems used in the process industries have tended to emphasize the control of continuous variables and
parameters. By contrast, the manufacturing industries produce discrete parts and products, and the controllers used here have
tended to emphasize discrete variables and parameters. Just as we have two basic types of variables and parameters that
characterize production operations, we also have two basic types of control:
(1) continuous control, in which the variables and parameters are continuous and analog;
(2) discrete control, in which the variables and parameters are discrete, mostly binary discrete. Some of the differences between
continuous control and discrete control are summarized in Table.
In reality, most operations in the process and
discrete manufacturing industries tend to include
both continuous as well as discrete variables and
parameters. Consequently, many industrial
controllers are designed with the capability to
receive, operate on, and transmit both types of
signals and data.
27. Continuous and discrete control systems
Industrial control systems used in the process industries have tended to emphasize the control of continuous variables and
parameters. By contrast, the manufacturing industries produce discrete parts and products, and the controllers used here have
tended to emphasize discrete variables and parameters. Just as we have two basic types of variables and parameters that
characterize production operations, we also have two basic types of control:
(1) continuous control, in which the variables and parameters are continuous and analog;
(2) discrete control, in which the variables and parameters are discrete, mostly binary discrete. Some of the differences between
continuous control and discrete control are summarized in Table.
In reality, most operations in the process and
discrete manufacturing industries tend to include
both continuous as well as discrete variables and
parameters. Consequently, many industrial
controllers are designed with the capability to
receive, operate on, and transmit both types of
signals and data.
28. Continuous control systems
Continuous Control Systems
In continuous control, the usual objective is to maintain the value of an output variable at a desired level, similar to the operation of a
feedback control system. However, most continuous processes in the practical world consist of many separate feedback loops, all of which
have to be controlled and coordinated to maintain the output variable at the desired value. Examples of continuous processes are the
following:
• Control of the output of a chemical reaction that depends on temperature, pressure, and
input flow rates of several reactants. All of these variables and/or parameters are continuous.
• Control of the position of a work part relative to a cutting tool in a contour milling
operation in which complex curved surfaces are generated. The position of the part is defined
by x, y and z coordinate values. As the part moves, the x, y, and z values can he considered as
continuous variables and/or parameters that change over lime to machine the part.
There are several approaches by which the control objective is achieved in a continuous
process control system.
Regulatory Control: In regulatory control, the objective is to maintain process performance
at a certain level or within a given tolerance band of that level. This is appropriate, for
example figure 4.2, when the performance attribute is some measure of product quality, and
it is important to keep the quality at the specified level Of within a specified range.
Feedforward Control The strategy in feedforward control is to anticipate the effete of
disturbances that will upset the process by sensing them and compensating for them
before they can affect the process. As shown in Figure 4.3, the feed forward control
elements sense the presence of a disturbance and take corrective action by adjusting a
process parameter that compensates for any effect the disturbance will have on the
process. In the ideal case, the compensation is completely effective.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
29. Discrete control systems
In Discrete Control Systems
Discrete control, the parameters and variables of the system are changed at discrete moments in time. The changes involve variables and
parameters that are also discrete, typically binary (ON/OFF). The changes are defined in advance by means of a program of instructions, for
example, a work cycle program. The changes are executed either because the state of the system has changed or because a certain amount of
time has elapsed.
These two cases can be distinguished as (1) event-driven changes or (2) time driven changes
An event-driven change is executed by the controller in response to some event that has caused the state of the system to he altered. The
change can be to initiate an operation or terminate an operation, start a motor or stop it, open a valve or close it, and so forth. Examples of
event-driven changes are:
• A robot loads a workfare into the fixture, and the part is sensed by a limit switch. Sensing the part's presence is the event that alters the
system state. The event-driven change is that the automatic machining cycle can now commence.
• The diminishing level of plastic molding compound in the hopper of an injection molding machine triggers a low-level switch, which in tum
triggers a valve to open that starts the flow of new plastic into the hopper. When the level of plastic reaches the high-level switch, this triggers
the valve to close, thus stopping the flow of pellets into the hopper.
• Counting parts moving along a conveyor past an optical sensor is an event-driven system. Each part moving past the sensor is an event that
drives the counter.
A time-driven change is executed by the control system either at a specific point in time or after a certain time lapse has occurred. As before,
the change usually consists of starting something or stopping something, and the time when the change occurs is important. Examples of time-
driven changes are:
• In factories with specific starting times and ending times for the shift and uniform break periods for all workers, the "shop clock" is set to
sound a bell at specific moments during the day to indicate these start and stop times.
• Heat treating operations must be carried out for a certain length of time. An automated heat treating cycle consists of automatic loading of
parts into the furnace (perhaps by a robot) and then unloading after the parts have been heated for the specified length of time.
30. Continuous and discrete control systems
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
31. Continuous and discrete control systems
A continuous variable (or parameter) is one that is uninterrupted as time proceeds, at least during the manufacturing
operation. A continuous variable is generally considered to be analog, which means it can take on any value within a certain
range. The variable is not restricted to a discrete set of values. Production operations in both the process industries and
discrete parts manufacturing are characterized by continuous variables. Examples include force:, temperature, flow rate,
pressure, and velocity. All of these variables (whichever ones apply to a given production process) arc continuous over time
during the process, and they can take on any of an infinite number of possible values within a certain practical range.
A discrete variable (or parameter) is one that can take on only certain values
within a given range. The most common type of discrete variable is binary,
meaning it can take on either of two possible values, ON or OFF, open or
closed, and so on. Examples of discrete binary variables and parameters in
manufacturing include: limit switch open or closed, motor on or off, and work
part present or not present in a fixture. Not all discrete variables (and
parameters) are binary. Other possibilities are variables that can take on more
than two possible values but less than an infinite number, that is, discrete
variables other than binary. Examples include daily piece counts in a production
operation and the display of a digital tachometer. A special form of discrete
variable (and parameter) is pulse data, which consist of a train of pulses. As a
discrete variable, a pulse train might be used to indicate piece counts; for
example, parts passing on a conveyor activate a photocell to produce a pulse for
each part detected. As a process parameter, a pulse train might be used to drive a
stepper motor. Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
32. Computer process control
Control Requirements
Whether the application involves continuous control, discrete control or both, there are certain basic requirements that tend
to be common to nearly all process control applications.
By and large, they are concerned with the need to communicate and interact with the process on areal-time basis. A real-lime
controller is able to respond to the process within a short enough time period that process performance is not degraded.
Factors that determine whether a computer controller can operate in real-time include:
(1) the speed of the controller's central processing unit (CPU) and its interfaces,
(2) the controller's operating system,
(3) the design of the application software, and
(4) the number of different input/output events to which the controller is designed to respond.
Real-time control usually requires the controller to be capable of multitasking, which means coping with multiple tasks
concurrently without the tasks interfering with one another.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
33. Computer process control
Control Requirements
There are two basic requirements that must be managed by the controller to achieve real-time control:
1. Process-initiated interrupts: The controller must be able to respond to incoming signals from the process. Depending on
the relative importance of the signals, the computer may need to interrupt execution of a current program to service a higher
priority need of the process. A process-initiated interrupt is often triggered by abnormal operating conditions, indicating that
some corrective action must be taken promptly.
2. Timer-initialed actions: The controller must be capable of executing certain actions at specified points in time. Timer-
initiated actions can be generated at regular time intervals, ranging from very low values (e.g., 100 mus) to several minutes.
or they can be generated at distinct points in time. Typical timer-initiated actions in process control include:
(1) scanning sensor values from the process at regular sampling intervals,
(2) turning on and off switches, motors, and other binary devices associated with the process at discrete points in time
during the work cycle,
(3) displaying performance data on the operator's console at regular times during a production run, and
(4) recomposing optimal process parameter values at specified times.
These two requirements correspond to the two types of changes:
(l) event-driven changes
(2) time-driven changes.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
34. Computer process control
Control Requirements
3. Computer commands to process: In addition to incoming signals from the process, the control computer must be able to
send control signals to the process to accomplish a corrective action.
4. System and program initiated event: These are events related to the computer system itself. They are similar to the kinds
of computer operations associated with business and engineering applications of computers. A system-initiated event
involves communications among computer and peripheral devices linked together in a network.
5. Operator-initiated events: The control computer must be able to accept input from operating personnel. Operator-
initiated events include:
(1) entering new pro grams:
(2) editing existing programs:
(3) entering customer data, order number, or startup instructions for the next production run:
(4) request for process data; and
(5) emergency stop.
Capabilities of Computer Control
The above requirements can be satisfied by providing the controller with certain capability's that allow it to interact on a
real-time basis with the process and the operator, The capabilities are: (1) polling (Data Sampling), (2) interlocks. (3)
interrupt system, and (4) exception handling.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
35. Computer process control
Levels of Industrial Process Control
In general. industrial control systems possess a hierarchical
structure consisting of multiple levels of functions, similar to our
levels of automation described earlier [Table 4.2). ANSIIISA-
S88.01-1995J [This standard was prepared for batch process
control but most of the concepts and terminology are applicable to
discrete parts manufacturing and continuous process control].
The divides process control functions into three levels:
(1) basic control,
(2) procedural control, and
(3) coordination control.
These control levels map into our automation hierarchy as shown
in Figure 4.7, We now describe the three control levels, perhaps
adapting the standard to fit our own models of continuous and
discrete control (the reader is referred to the original standard,
available from the Instrument Society of America).
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
36. Common measuring devices used in automation
Forms of computer process control
There are various ways in which computers can be used to control a process.
(1) Computer process monitoring.
(2) Direct digital control.
(3) Numerical control and robotics.
(4) programmable logic controllers.
(5) Supervisory control, and
(6) Distributed control systems and personal computers.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
37. Desirable features for selection of measuring devices
A wide variety of measuring devices is available for collecting data from the manufacturing process for use in feedback
control. In general a measuring device is composed of two components: a sensor and a transducer. The sensor detects the
physical variable of interest (such as temperature, force, or pressure), The transducer converts the physical variable into an
alternative form (commonly electrical voltage), quantifying the variable in the conversion. The quantified signal can be
interpreted as the value of the measured variable. In some cases, the sensor and transducer are the same device; for example,
a limit switch that converts the mechanical movement of a lever to close an electrical contact.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
38. Desirable features for selection of measuring devices
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
39. Desirable features for selection of measuring devices
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
40. Desirable features for selection of measuring devices
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
41. Desirable features for selection of measuring devices
ACTUATORS
In industrial control systems, an actuator is a
hardware device that converts a controller command
signal into a change in a physical parameter. The
change in the physical parameter is usually
mechanical. such as position or velocity change.
An actuator is a transducer because it changes one
type of physical quantity say electric current, into
another type of physical quantity, say rotational
speed of an electric motor. The controller command
signal is usually low level, and so an actuator may
also include an amplifier to strengthen the signal
sufficiently to drive the actuator.
A list of common actuators is presented in next
Table 5.4. Depending on the type of amplifier used.
most actuators can he classified into one of three
categories: (1) electrical, (2) hydraulic, and (3)
pneumatic.
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by M.P. Groover.
Portion of this section are based on M.P. Groover; Fundamentals of manufacturing: Materials, processes and systems
48. What Is Home Automation?
It's a system in which homeowners use high-tech devices to control their appliances, lightings, doors, etc. Its simplest application
is the use of remote control to turn appliances and lights on and off.
Throughout the years following its development, it has become more popular, and many people have adapted the system to their
own homes. It also became more affordable and simpler with the use of smart phones and other handy devices.
Some Applications of Home Automation:
•Access Control
In lieu of keys and locks, automated access control can make your home more secured. It can be a device that reads fingerprints or
key cards to permit entrance to your home. When the device cannot read the fingerprint or card, it will trigger an alarm that will
warn you of possible intruders.
•Light Control
Light control includes a motion sensor which enables light to automatically turn on as you enter the room and go off as you leave.
•HVAC System
Automation can be applied on your heating, ventilating, and air conditioning appliances. The system lets you control the level of
temperature in your home to enhance your level of comfort.
•Fire Protection
An alarm will ring when the device detects fire to warn you of an emergency. The other automated appliances will also be turned
off.
•Video Surveillance
This helps homeowners to monitor their house whenever they’re away. It is also convenient for parents who need to look after
their children, especially the babies.
Case Studies: Home automation system