The first highly integrated 77 GHz short range radar sensor for advanced driver assistance systems with a single receive-transmit MMIC bare die from Infineon found on the market.
More information on that report at: https://www.systemplus.fr/reverse-costing-reports/aptivs-third-generation-of-77-ghz-based-short-range-radar-srr3/
Continental, Veoneer, ZF, Valeo, Bosch, Aptiv, Denso, Ainstein: Discover the technologies used in the main Radar Systems and Chipsets.
More information on that report at: https://www.systemplus.fr/reverse-costing-reports/automotive-radar-comparison-2018/
Ainstein T-79: Automotive 79GHz Short Range Radarsystem_plus
A next-generation short-range, wideband and high-resolution radar sensor for Advanced Driver Assistance Systems (ADAS).
More information on that report at: http://www.systemplus.fr/reverse-costing-reports/ainstein-t-79-automotive-79ghz-short-range-radar/
World’s first 76-81 GHz automotive single-chip radar in a System-on-Chip device with integrated Antenna-in-Package using Fan-Out packaging technology.
Reverse Costing - Structure, process and cost report by System Plus Consulting - find more here: https://www.systemplus.fr/reverse-costing-reports/mediatek-autus-r10-mt2706-77-79-ghz-ewlbaip-radar-chipset/
The first Aptiv short range radar with Infineon SiGe CMOS technology for Advanced Driver Assistance Systems (ADAS).
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/aptiv-r3tr-76ghz-short-range-radar/
ZF S-Cam 4 – Forward Automotive Mono and Tri Camera for Advanced Driver Assis...system_plus
Fourth generation of the S-Cam family from the leading ADAS camera player.
Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/zf-s-cam-4-forward-automotive-mono-and-tri-camera-for-adas/
The world’s first single-chip radar (76 - 81 GHz) in a System-on-Chip.
Ahead of its competitors in RFCMOS applications, Texas Instruments (TI) has begun manufacturing highly integrated radar sensor chips - the latest of which is the AWR1642. But rather than integrating all transmitters, receivers, and local oscillators in a single chip, TI went further and integrated a microcontroller unit (MCU) and a digital signal processor (DSP) on the same chip.
More information on that report at http://www.systemplus.fr/reverse-costing-reports/awr1642-77-79-ghz-rfcmos-radar-chipset-from-texas-instruments/
A PTFE-free radar, with single receive-transmit MMIC based on TowerJazz’s SiGe CMOS technology, for the first time associated with a phased array antenna.
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/denso-dnsrr004-short-range-radar/
Qorvo TQF6405 High Band FEM SMR-BAW Filter iPhone 6s Plus 2016 teardown reve...Yole Developpement
orvo started as a supplier for Apple’s iPhone with the first iPhone 3G. Since then Apple has been integrating Qorvo’s Module in its flagship. In iPhone 6s series, Apple integrates Qorvo’s LTE High Band Front-End Module.
The merge of Triquint and RFMD in Qorvo formed a top competitor in wireless communication specially in SMR BAW filter.
Located on the main board of the Apple iPhone 6s Plus smartphone, the Qorvo TQF6405 is a complete Front-End Module for high band LTE application. The component is made with several filter dies, assembled on a coreless PCB substrate. It integrates many technology like copper pillar, SMR-BAW filter, proprietary of Qorvo.
All dies present in the component uses TriQuint's proven front-side Cu/Sn pillar technology (Cu-Flip™) for simplified assembly and low interconnect inductance, allowing the assembly of all components of the Front-End Module on the same chip with an area of less than 35 mm².
Specific air cavities are made around each resonator before copper pillar fabrication to preserve any losses.
More information on that report at http://www.i-micronews.com/reports.html
Continental, Veoneer, ZF, Valeo, Bosch, Aptiv, Denso, Ainstein: Discover the technologies used in the main Radar Systems and Chipsets.
More information on that report at: https://www.systemplus.fr/reverse-costing-reports/automotive-radar-comparison-2018/
Ainstein T-79: Automotive 79GHz Short Range Radarsystem_plus
A next-generation short-range, wideband and high-resolution radar sensor for Advanced Driver Assistance Systems (ADAS).
More information on that report at: http://www.systemplus.fr/reverse-costing-reports/ainstein-t-79-automotive-79ghz-short-range-radar/
World’s first 76-81 GHz automotive single-chip radar in a System-on-Chip device with integrated Antenna-in-Package using Fan-Out packaging technology.
Reverse Costing - Structure, process and cost report by System Plus Consulting - find more here: https://www.systemplus.fr/reverse-costing-reports/mediatek-autus-r10-mt2706-77-79-ghz-ewlbaip-radar-chipset/
The first Aptiv short range radar with Infineon SiGe CMOS technology for Advanced Driver Assistance Systems (ADAS).
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/aptiv-r3tr-76ghz-short-range-radar/
ZF S-Cam 4 – Forward Automotive Mono and Tri Camera for Advanced Driver Assis...system_plus
Fourth generation of the S-Cam family from the leading ADAS camera player.
Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/zf-s-cam-4-forward-automotive-mono-and-tri-camera-for-adas/
The world’s first single-chip radar (76 - 81 GHz) in a System-on-Chip.
Ahead of its competitors in RFCMOS applications, Texas Instruments (TI) has begun manufacturing highly integrated radar sensor chips - the latest of which is the AWR1642. But rather than integrating all transmitters, receivers, and local oscillators in a single chip, TI went further and integrated a microcontroller unit (MCU) and a digital signal processor (DSP) on the same chip.
More information on that report at http://www.systemplus.fr/reverse-costing-reports/awr1642-77-79-ghz-rfcmos-radar-chipset-from-texas-instruments/
A PTFE-free radar, with single receive-transmit MMIC based on TowerJazz’s SiGe CMOS technology, for the first time associated with a phased array antenna.
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/denso-dnsrr004-short-range-radar/
Qorvo TQF6405 High Band FEM SMR-BAW Filter iPhone 6s Plus 2016 teardown reve...Yole Developpement
orvo started as a supplier for Apple’s iPhone with the first iPhone 3G. Since then Apple has been integrating Qorvo’s Module in its flagship. In iPhone 6s series, Apple integrates Qorvo’s LTE High Band Front-End Module.
The merge of Triquint and RFMD in Qorvo formed a top competitor in wireless communication specially in SMR BAW filter.
Located on the main board of the Apple iPhone 6s Plus smartphone, the Qorvo TQF6405 is a complete Front-End Module for high band LTE application. The component is made with several filter dies, assembled on a coreless PCB substrate. It integrates many technology like copper pillar, SMR-BAW filter, proprietary of Qorvo.
All dies present in the component uses TriQuint's proven front-side Cu/Sn pillar technology (Cu-Flip™) for simplified assembly and low interconnect inductance, allowing the assembly of all components of the Front-End Module on the same chip with an area of less than 35 mm².
Specific air cavities are made around each resonator before copper pillar fabrication to preserve any losses.
More information on that report at http://www.i-micronews.com/reports.html
Continental’s 3rd-generation short-range radar sensor: a simplified design improves cost-effectiveness.
The Continental SRR3-B is designed for automotive applications like blind-spot detection, lane-change assist, rear cross-traffic alert, rear pre-crash, safe exit, collision mitigation, distance warning /monitoring, and more. The SRR3-B is based on 24 GHz technology and contains a planar antenna. The sensor has a field of view of ±75° in azimuth and a maximum range of more than 90m.
More information on that report at http://www.systemplus.fr/reverse-costing-reports/continental-srr3-b-24ghz-blind-spot-radar/
An ultrasonic sensor in a compact housing, with 20-450cm detection range.
Ultrasonic transducers are used in vehicles as parking assistance. The ultrasonic transducer sends out short ultrasonic impulses which are reflected by barriers. The echo signals are registered by the sensor and are evaluated by a central control unit.
This ultrasonic parking sensor from Bosch is very compact with its very few components meaning it is manufactured at low cost. The sensor is made with one electronic board, including a Bosch transceiver integrated circuit (IC) that drives the output of the Epcos/TDK transformer and evaluates the reflected signal. The transducer itself is made of a lead zirconate titanate (PZT) membrane and silver electrodes.
More information on that report at http://www.i-micronews.com/reports.html
The FS100R12PT4 from Infineon is the 6 - IGBT4 generation high-voltage power module in EconoPACK™ package. With a breakdown voltage of 1200V for a current of 100A, the module is optimized for high power converters and motor drivers. The power module integrates in a new generation of power packaging the improved IGBT4 and the optimized EMCON4 diodes from Infineon.
The EconoPACKTM IGBT4 offers a very low on-resistance (1.4 mΩ) and a higher operating temperature (up to 150 °C) in a 130.0 x 103.0 x 20.55 mm package. The IGBT4 differs from the IGBT3 for an adjusted backside, a different gate dimensions to obtain lower switching losses and increase softness for the same robustness.
This full reverse costing study has been conducted to provide insight on technology data, manufacturing cost and selling price of the Infineon FS100R12PT4, a technological comparison between Infineon IGBT3 and IGBT4 and EconoPACK4 and HybridPACK2.
Bulk GaN Substrate Market 2017 Report by Yole DeveloppementYole Developpement
Optoelectronics applications are driving the bulk GaN substrate market
Optoelectronics applications, particularly GaN-based laser diodes and GaN-on-GaN LEDs, are expected to drive the bulk GaN susbtrate market from 2016 - 2022.
Specific to the laser diode market, the Blu-ray segment, which in the past was the GaN-based laser industry’s main driver, continues to decline. In recent years, a much greater percentage of movies were viewed via streaming than on optical discs, and in many cases flash memory is replacing optical discs and magnetic storage. The current crop of mobile phones, netbooks, tablets, and even laptops lack a Blu-ray/DVD/CD drive. UHD Blu-ray’s recent development is expected to have only a novelty effect on sales - not enough to reverse the general downward trend we will see in the coming years. However, decreasing Blu-ray demand is expected to be offset by nascent, growing segments like projectors (office projector, mobile pico projector, head-up display (HUD), etc.) and automotive lighting, leading to new growth opportunities for bulk GaN substrates.
In the LED market, improvements in GaN substrate manufacturing have lowered substrate prices enough for various niche LED applications. In addition to Soraa (US) and Panasonic (JP), this seems to have revived the interest of other LED manufacturers which are beginning to seriously consider using GaN substrates for either spotlighting or automotive lighting. New GaN-on-GaN LED players are expected in the market in the coming years.
For more information, please visit our website: http://www.i-micronews.com/reports.html
Broadcom AFEM-8072 – Mid and High Band LTE RF Front-End Module (FEM) - teardo...system_plus
The first mid/high band Long Term Evolution (LTE) Radio Frequency (RF) FEM in the Apple iPhone X integrates the latest generation of Film Bulk Acoustic Resonator (FBAR) technology with advanced and innovative packaging.
More information on that report at http://www.systemplus.fr/reverse-costing-reports/broadcom-afem-8072-mid-and-high-band-lte-rf-front-end-module-fem/
LG LA080WV3 –8-inch Display with Touch Panel for Car Navigation 2017 teardown...Yole Developpement
An inside look at the reasons why LG Display is one of the top players in the automotive display market
Automotive displays are increasingly replacing mechanical meters and buttons, and the display market is therefore forecasted to grow rapidly over the next few years.
However, it is still unclear which suppliers will emerge as long-term winners. To fulfill the requirements of the market and its users, it is important to consider various conditions and specifications.
Display characteristics like luminance, contrast ratio, greyscale, and color, and their maintenance under automotive conditions of varying temperature and ambient light must continually improve.
LG Display provides smart infotainment to drivers and passengers. Its advanced high performance in-plane switching (AH-IPS) enables high resolution, high luminance and wide viewing angle, which is the display standard in smart cars.
LG Display stays competitive by combining low-cost manufacturing at its Nanjing site and the experience it has acquired in the automotive market.
This report presents a complete teardown analysis of LG’s LA080WV3 8-inch display and the associated touchscreen extracted from the Hyundai Tucson.
Based on this, it provides the bill-of-material (BOM) and manufacturing cost of the display module. The report also offers a complete physical analysis and manufacturing cost estimate for every part, including the backlight module and the different mechanical frames.
The MRR20 is a 77GHz radar sensor offering mid-range detection for Advanced Driver Assistance Systems (ADAS).
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/mando-mrr20-77ghz-mid-range-radar/
Oppo Find X Teardown and Identification of Key Componentssystem_plus
Discover key devices used by Oppo for its first European smartphone market entry.
More information on that report at: https://www.systemplus.fr/reverse-costing-reports/oppo-find-x-teardown-and-identification-of-key-components/
First self-made SoC for advanced driving in Tesla Driver Assist Autopilot 3.0
More : https://www.systemplus.fr/reverse-costing-reports/tesla-ubq01b0-fsd-chip/
Qualcomm QCA9500 60 GHz Chipset - reverse costing report published by System ...system_plus
Disruptive double side molded system-in-package-based chipset for millimeter-wave applications targeting consumer devices, including integrated antennae.
2018 will be a key milestone in the journey towards 5G communication. Several areas, from semiconductor to packaging, will improve their technologies to be suitable for 5G deployment. We now know that the 5G frequency will be in the millimeter wave (mmWave) range.
More information on that report at http://www.i-micronews.com/reports.html
Qorvo QPF4006 39GHz GaN MMIC Front End Modulesystem_plus
The first MMIC FEM targeting 5G base stations and terminals using a 0.15µm GaN-on-SiC process.
More information on that report at: https://www.systemplus.fr/reverse-costing-reports/qorvo-qpf4006-39ghz-gan-mmic-front-end-module/
Deep analysis of the 400Gb optical transceiver from a leading Chinese company.
More information: https://www.systemplus.fr/reverse-costing-reports/innolights-400g-qsfp-dd-optical-transceiver/
Continental SRL1: State-of-the-art LiDAR for Advanced Driver Assistance Syste...Yole Developpement
Continental consolidates its successful role in ADAS-related equipment with this cost-effective solution for emergency brake assist.
Light detection and ranging (LiDAR) sensing has a wide spectrum of applications, one of which is in autonomous or “self-driving” cars. LiDAR is therefore attracting attention from the automotive industry, as well as other fields. However, until now, systems haven’t matched challenging automotive specifications for reliability, compact-ness, and cost-efficiency.
Based on rugged design and components, the SRL-1 from Continental provides a reliable and efficient solid-state LiDAR for frontal impact detection without any mechanical movement. Detecting collisions in an urban environment at speeds up to 50km/h, including an emergency braking assist (EBA) function, makes this product a great asset for today’s autonomous and assisted driving needs.
More information on that report at http://www.i-micronews.com/reports.html
LeddarVu8: The first off-the-shelf solid state high-definition LiDAR module f...Yole Developpement
LeddarTech’s new LiDAR has no moving parts, giving it the smallest form factor while integrating the latest innovations in LiDAR technology
The light detection and ranging principle and technology, also known as LiDAR, is used in a wide spectrum of applications. With upcoming autonomous or “self-driving” cars, LiDAR technology is being considered for one option for the “eyes” of such vehicles. However, existing systems do not match the challenging reliability, compactness and cost-efficiency specifications of the automotive world.
Based on “LeddarCore” components, Leddartech has developed LeddarVu8, a compact solid-state LiDAR without mechanical movement that provides highly accurate multi-target detection over eight independent segments. It detects targets at up to 215 m range despite its tiny size of 70 mm x 35 mm x 46 mm and weighing only 75 grams. The LeddarVu8 delivers nearly twice the range for half the volume compared to the previous version.
These qualities qualify the LeddarVu8 as a candidate for advanced driver assistance, replacing the radar. With its adjustable and interchangeable optics module, the LeddarVu8 can also be interesting for other applications, such as traffic management, speed enforcement, heavy-duty equipment collision warning, navigation, liquid level sensing and bulk volume measurements.
The light is emitted by Excelitas’ tri-stacked emitting edge laser diode of 75W and received by a photodiode array. The two components are designed for large volume markets and some innovations reduce their usually high cost. This first automotive version of the LeddarVu8 shows the full potential of this technology to go under the $100 barrier.
This report presents the full system manufacturing and packaging processes for the LeddarVu8 as well as the physical analysis of the two main optical components, the laser diode and the photodiode. An estimation of the manufacturing cost and selling price is included.
More information on that report at http://www.i-micronews.com/reports.html
Technical and cost overview of the evolution of the radio frequency front-end module technologies integrated in the Apple iPhone series from 2016 - 2020.
More : https://www.systemplus.fr/reverse-costing-reports/rf-front-end-module-comparison-2021-vol-1-focus-on-apple/
Thin wafer processing and Dicing equipment market - 2016 Report by Yole Devel...Yole Developpement
Strong demand for thinner wafers and smaller die is driving the evolution of dicing technologies
Demand for thinned wafers is growing strongly!
Driven by consumer applications such as smartphones, smart cards and stacked packages, the demand for thinned wafers has increased over recent years.
We estimate that the number of thinned wafers used for MEMS devices, CMOS Image Sensors, memory and logic devices, including those with TSVs, as well as and Power devices exceeded the equivalent of 16.5 million 8-inch wafer starts per year (WSPY) in 2015. This is mainly supported by CMOS Image Sensors, followed by Power devices. We expect that this number of thinned wafers will peak at the equivalent of almost 32 million 8-inch WSPY by 2020. This would represent a 14% compound annual growth rate (CAGR) from 2015 to 2020.
Thinner wafers bring several benefits, including enabling very thin packaging, and therefore better form factors, improved electrical performance and high heat dissipation.
Miniaturization towards smaller, higher-performing, lower-cost device configurations has thinned wafers below 100 µm or even 50 µm for some applications, such as memory and power devices.
Forecasts for the number of thinned wafers by thickness and by application are analyzed in this report. It also includes insights on the number of thinning tools, breakdowns by wafer size, and technological highlights affecting the applications mentioned above...
Deep dive analysis of the fourth generation of mid/high band front-end module for 4G and 5G from Broadcom.
More information : https://www.systemplus.fr/reverse-costing-reports/broadcom-afem-8200-pamid-in-the-apple-iphone-12-series/
Engage with...Romax | Driving the Electric Revolution WebinarKTN
Romax Technology, part of Hexagon’s Manufacturing Intelligence division, provides world-leading solutions and expertise in multi-physics analysis and electro-mechanical design, working dynamically and collaboratively to make a global difference.
GaN-on-Silicon Transistor Comparison 2018 Structural, Process & Costing Repor...Yole Developpement
Dive deep into the technology and cost of GaN-on-silicon HEMTs from EPC, Transphorm, GaN Systems, Panasonic and Texas Instruments.
More information on that report at https://www.i-micronews.com/report/product/gan-on-silicon-transistor-comparison-2018.html
The Audi A8 zFAS ADAS Platform by Aptivsystem_plus
The first level 3 autonomous driving system, designed by Audi and manufactured by Aptiv (Delphi), integrates high-performance processors from Nvidia (Tegra K1), Altera (Cyclon V), Infineon (Aurix), and Mobileye (EyeQ3 image processor)
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/the-audi-a8-zfas-adas-platform-by-aptiv/
The ARS4-A is a 77 GHz radar sensor offering simultaneous long and short range detection
The Continental ARS4-A Radar is designed for forward collision warning, emergency brake assist, collision mitigation system or Adaptive Cruise Control (ACC). A special feature of the device is the simultaneous measurement of long distances, up to 250m with +/-0.2m accuracy, and short range, up to 70m, relative velocity and angle between two objects. It is thus able to detect stationary objects without any camera support.
The system integrates two electronic boards including an NXP Semiconductor microcontroller and Broadcom Ethernet transceiver. The radio-frequency (RF) board is manufactured with an asymmetric structure using a hybrid PTFE/FR4 substrate and is equipped with planar antennas.
The NXP Semiconductor multi-channel 77 GHz radar transceiver chipset, composed of four receivers, two transmitters and an associated voltage controlled oscillator (VCO), is used as high-frequency transmitter and receiver. The RF dies are packaged in redistributed chip package (RCP) fan-out wafer level packages initially developed and manufactured by Freescale.
Based on a complete teardown analysis of the Continental radar, the report provides the bill-of-material (BOM) and the manufacturing cost of the radar sensor.
A complete physical analysis and manufacturing cost estimation of the NXP semiconductor monolithic microwave integrated circuits (MMICs) is available in a separate report.
More information on that report at http://www.i-micronews.com/reports.html
Denso DNMWR009 Cruise Control Radar Distance Sensorsystem_plus
A cruise control radar distance sensor with Infineon SiGe CMOS Technology for Advanced Driver Assistance Systems (ADAS).
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/denso-dnmwr009-cruise-control-radar-distance-sensor/
Continental’s 3rd-generation short-range radar sensor: a simplified design improves cost-effectiveness.
The Continental SRR3-B is designed for automotive applications like blind-spot detection, lane-change assist, rear cross-traffic alert, rear pre-crash, safe exit, collision mitigation, distance warning /monitoring, and more. The SRR3-B is based on 24 GHz technology and contains a planar antenna. The sensor has a field of view of ±75° in azimuth and a maximum range of more than 90m.
More information on that report at http://www.systemplus.fr/reverse-costing-reports/continental-srr3-b-24ghz-blind-spot-radar/
An ultrasonic sensor in a compact housing, with 20-450cm detection range.
Ultrasonic transducers are used in vehicles as parking assistance. The ultrasonic transducer sends out short ultrasonic impulses which are reflected by barriers. The echo signals are registered by the sensor and are evaluated by a central control unit.
This ultrasonic parking sensor from Bosch is very compact with its very few components meaning it is manufactured at low cost. The sensor is made with one electronic board, including a Bosch transceiver integrated circuit (IC) that drives the output of the Epcos/TDK transformer and evaluates the reflected signal. The transducer itself is made of a lead zirconate titanate (PZT) membrane and silver electrodes.
More information on that report at http://www.i-micronews.com/reports.html
The FS100R12PT4 from Infineon is the 6 - IGBT4 generation high-voltage power module in EconoPACK™ package. With a breakdown voltage of 1200V for a current of 100A, the module is optimized for high power converters and motor drivers. The power module integrates in a new generation of power packaging the improved IGBT4 and the optimized EMCON4 diodes from Infineon.
The EconoPACKTM IGBT4 offers a very low on-resistance (1.4 mΩ) and a higher operating temperature (up to 150 °C) in a 130.0 x 103.0 x 20.55 mm package. The IGBT4 differs from the IGBT3 for an adjusted backside, a different gate dimensions to obtain lower switching losses and increase softness for the same robustness.
This full reverse costing study has been conducted to provide insight on technology data, manufacturing cost and selling price of the Infineon FS100R12PT4, a technological comparison between Infineon IGBT3 and IGBT4 and EconoPACK4 and HybridPACK2.
Bulk GaN Substrate Market 2017 Report by Yole DeveloppementYole Developpement
Optoelectronics applications are driving the bulk GaN substrate market
Optoelectronics applications, particularly GaN-based laser diodes and GaN-on-GaN LEDs, are expected to drive the bulk GaN susbtrate market from 2016 - 2022.
Specific to the laser diode market, the Blu-ray segment, which in the past was the GaN-based laser industry’s main driver, continues to decline. In recent years, a much greater percentage of movies were viewed via streaming than on optical discs, and in many cases flash memory is replacing optical discs and magnetic storage. The current crop of mobile phones, netbooks, tablets, and even laptops lack a Blu-ray/DVD/CD drive. UHD Blu-ray’s recent development is expected to have only a novelty effect on sales - not enough to reverse the general downward trend we will see in the coming years. However, decreasing Blu-ray demand is expected to be offset by nascent, growing segments like projectors (office projector, mobile pico projector, head-up display (HUD), etc.) and automotive lighting, leading to new growth opportunities for bulk GaN substrates.
In the LED market, improvements in GaN substrate manufacturing have lowered substrate prices enough for various niche LED applications. In addition to Soraa (US) and Panasonic (JP), this seems to have revived the interest of other LED manufacturers which are beginning to seriously consider using GaN substrates for either spotlighting or automotive lighting. New GaN-on-GaN LED players are expected in the market in the coming years.
For more information, please visit our website: http://www.i-micronews.com/reports.html
Broadcom AFEM-8072 – Mid and High Band LTE RF Front-End Module (FEM) - teardo...system_plus
The first mid/high band Long Term Evolution (LTE) Radio Frequency (RF) FEM in the Apple iPhone X integrates the latest generation of Film Bulk Acoustic Resonator (FBAR) technology with advanced and innovative packaging.
More information on that report at http://www.systemplus.fr/reverse-costing-reports/broadcom-afem-8072-mid-and-high-band-lte-rf-front-end-module-fem/
LG LA080WV3 –8-inch Display with Touch Panel for Car Navigation 2017 teardown...Yole Developpement
An inside look at the reasons why LG Display is one of the top players in the automotive display market
Automotive displays are increasingly replacing mechanical meters and buttons, and the display market is therefore forecasted to grow rapidly over the next few years.
However, it is still unclear which suppliers will emerge as long-term winners. To fulfill the requirements of the market and its users, it is important to consider various conditions and specifications.
Display characteristics like luminance, contrast ratio, greyscale, and color, and their maintenance under automotive conditions of varying temperature and ambient light must continually improve.
LG Display provides smart infotainment to drivers and passengers. Its advanced high performance in-plane switching (AH-IPS) enables high resolution, high luminance and wide viewing angle, which is the display standard in smart cars.
LG Display stays competitive by combining low-cost manufacturing at its Nanjing site and the experience it has acquired in the automotive market.
This report presents a complete teardown analysis of LG’s LA080WV3 8-inch display and the associated touchscreen extracted from the Hyundai Tucson.
Based on this, it provides the bill-of-material (BOM) and manufacturing cost of the display module. The report also offers a complete physical analysis and manufacturing cost estimate for every part, including the backlight module and the different mechanical frames.
The MRR20 is a 77GHz radar sensor offering mid-range detection for Advanced Driver Assistance Systems (ADAS).
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/mando-mrr20-77ghz-mid-range-radar/
Oppo Find X Teardown and Identification of Key Componentssystem_plus
Discover key devices used by Oppo for its first European smartphone market entry.
More information on that report at: https://www.systemplus.fr/reverse-costing-reports/oppo-find-x-teardown-and-identification-of-key-components/
First self-made SoC for advanced driving in Tesla Driver Assist Autopilot 3.0
More : https://www.systemplus.fr/reverse-costing-reports/tesla-ubq01b0-fsd-chip/
Qualcomm QCA9500 60 GHz Chipset - reverse costing report published by System ...system_plus
Disruptive double side molded system-in-package-based chipset for millimeter-wave applications targeting consumer devices, including integrated antennae.
2018 will be a key milestone in the journey towards 5G communication. Several areas, from semiconductor to packaging, will improve their technologies to be suitable for 5G deployment. We now know that the 5G frequency will be in the millimeter wave (mmWave) range.
More information on that report at http://www.i-micronews.com/reports.html
Qorvo QPF4006 39GHz GaN MMIC Front End Modulesystem_plus
The first MMIC FEM targeting 5G base stations and terminals using a 0.15µm GaN-on-SiC process.
More information on that report at: https://www.systemplus.fr/reverse-costing-reports/qorvo-qpf4006-39ghz-gan-mmic-front-end-module/
Deep analysis of the 400Gb optical transceiver from a leading Chinese company.
More information: https://www.systemplus.fr/reverse-costing-reports/innolights-400g-qsfp-dd-optical-transceiver/
Continental SRL1: State-of-the-art LiDAR for Advanced Driver Assistance Syste...Yole Developpement
Continental consolidates its successful role in ADAS-related equipment with this cost-effective solution for emergency brake assist.
Light detection and ranging (LiDAR) sensing has a wide spectrum of applications, one of which is in autonomous or “self-driving” cars. LiDAR is therefore attracting attention from the automotive industry, as well as other fields. However, until now, systems haven’t matched challenging automotive specifications for reliability, compact-ness, and cost-efficiency.
Based on rugged design and components, the SRL-1 from Continental provides a reliable and efficient solid-state LiDAR for frontal impact detection without any mechanical movement. Detecting collisions in an urban environment at speeds up to 50km/h, including an emergency braking assist (EBA) function, makes this product a great asset for today’s autonomous and assisted driving needs.
More information on that report at http://www.i-micronews.com/reports.html
LeddarVu8: The first off-the-shelf solid state high-definition LiDAR module f...Yole Developpement
LeddarTech’s new LiDAR has no moving parts, giving it the smallest form factor while integrating the latest innovations in LiDAR technology
The light detection and ranging principle and technology, also known as LiDAR, is used in a wide spectrum of applications. With upcoming autonomous or “self-driving” cars, LiDAR technology is being considered for one option for the “eyes” of such vehicles. However, existing systems do not match the challenging reliability, compactness and cost-efficiency specifications of the automotive world.
Based on “LeddarCore” components, Leddartech has developed LeddarVu8, a compact solid-state LiDAR without mechanical movement that provides highly accurate multi-target detection over eight independent segments. It detects targets at up to 215 m range despite its tiny size of 70 mm x 35 mm x 46 mm and weighing only 75 grams. The LeddarVu8 delivers nearly twice the range for half the volume compared to the previous version.
These qualities qualify the LeddarVu8 as a candidate for advanced driver assistance, replacing the radar. With its adjustable and interchangeable optics module, the LeddarVu8 can also be interesting for other applications, such as traffic management, speed enforcement, heavy-duty equipment collision warning, navigation, liquid level sensing and bulk volume measurements.
The light is emitted by Excelitas’ tri-stacked emitting edge laser diode of 75W and received by a photodiode array. The two components are designed for large volume markets and some innovations reduce their usually high cost. This first automotive version of the LeddarVu8 shows the full potential of this technology to go under the $100 barrier.
This report presents the full system manufacturing and packaging processes for the LeddarVu8 as well as the physical analysis of the two main optical components, the laser diode and the photodiode. An estimation of the manufacturing cost and selling price is included.
More information on that report at http://www.i-micronews.com/reports.html
Technical and cost overview of the evolution of the radio frequency front-end module technologies integrated in the Apple iPhone series from 2016 - 2020.
More : https://www.systemplus.fr/reverse-costing-reports/rf-front-end-module-comparison-2021-vol-1-focus-on-apple/
Thin wafer processing and Dicing equipment market - 2016 Report by Yole Devel...Yole Developpement
Strong demand for thinner wafers and smaller die is driving the evolution of dicing technologies
Demand for thinned wafers is growing strongly!
Driven by consumer applications such as smartphones, smart cards and stacked packages, the demand for thinned wafers has increased over recent years.
We estimate that the number of thinned wafers used for MEMS devices, CMOS Image Sensors, memory and logic devices, including those with TSVs, as well as and Power devices exceeded the equivalent of 16.5 million 8-inch wafer starts per year (WSPY) in 2015. This is mainly supported by CMOS Image Sensors, followed by Power devices. We expect that this number of thinned wafers will peak at the equivalent of almost 32 million 8-inch WSPY by 2020. This would represent a 14% compound annual growth rate (CAGR) from 2015 to 2020.
Thinner wafers bring several benefits, including enabling very thin packaging, and therefore better form factors, improved electrical performance and high heat dissipation.
Miniaturization towards smaller, higher-performing, lower-cost device configurations has thinned wafers below 100 µm or even 50 µm for some applications, such as memory and power devices.
Forecasts for the number of thinned wafers by thickness and by application are analyzed in this report. It also includes insights on the number of thinning tools, breakdowns by wafer size, and technological highlights affecting the applications mentioned above...
Deep dive analysis of the fourth generation of mid/high band front-end module for 4G and 5G from Broadcom.
More information : https://www.systemplus.fr/reverse-costing-reports/broadcom-afem-8200-pamid-in-the-apple-iphone-12-series/
Engage with...Romax | Driving the Electric Revolution WebinarKTN
Romax Technology, part of Hexagon’s Manufacturing Intelligence division, provides world-leading solutions and expertise in multi-physics analysis and electro-mechanical design, working dynamically and collaboratively to make a global difference.
GaN-on-Silicon Transistor Comparison 2018 Structural, Process & Costing Repor...Yole Developpement
Dive deep into the technology and cost of GaN-on-silicon HEMTs from EPC, Transphorm, GaN Systems, Panasonic and Texas Instruments.
More information on that report at https://www.i-micronews.com/report/product/gan-on-silicon-transistor-comparison-2018.html
The Audi A8 zFAS ADAS Platform by Aptivsystem_plus
The first level 3 autonomous driving system, designed by Audi and manufactured by Aptiv (Delphi), integrates high-performance processors from Nvidia (Tegra K1), Altera (Cyclon V), Infineon (Aurix), and Mobileye (EyeQ3 image processor)
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/the-audi-a8-zfas-adas-platform-by-aptiv/
The ARS4-A is a 77 GHz radar sensor offering simultaneous long and short range detection
The Continental ARS4-A Radar is designed for forward collision warning, emergency brake assist, collision mitigation system or Adaptive Cruise Control (ACC). A special feature of the device is the simultaneous measurement of long distances, up to 250m with +/-0.2m accuracy, and short range, up to 70m, relative velocity and angle between two objects. It is thus able to detect stationary objects without any camera support.
The system integrates two electronic boards including an NXP Semiconductor microcontroller and Broadcom Ethernet transceiver. The radio-frequency (RF) board is manufactured with an asymmetric structure using a hybrid PTFE/FR4 substrate and is equipped with planar antennas.
The NXP Semiconductor multi-channel 77 GHz radar transceiver chipset, composed of four receivers, two transmitters and an associated voltage controlled oscillator (VCO), is used as high-frequency transmitter and receiver. The RF dies are packaged in redistributed chip package (RCP) fan-out wafer level packages initially developed and manufactured by Freescale.
Based on a complete teardown analysis of the Continental radar, the report provides the bill-of-material (BOM) and the manufacturing cost of the radar sensor.
A complete physical analysis and manufacturing cost estimation of the NXP semiconductor monolithic microwave integrated circuits (MMICs) is available in a separate report.
More information on that report at http://www.i-micronews.com/reports.html
Denso DNMWR009 Cruise Control Radar Distance Sensorsystem_plus
A cruise control radar distance sensor with Infineon SiGe CMOS Technology for Advanced Driver Assistance Systems (ADAS).
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/denso-dnmwr009-cruise-control-radar-distance-sensor/
Triple Forward Camera from Tesla Model 3system_plus
Complete analysis of the main sensing part of the Tesla‘s autopilot system.
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/triple-forward-camera-from-tesla-model-3/
The latest Freebox Delta Server, supplied by Freebox, the French internet service provider, is the first modem/router compatible with the 10 Gbit/s FTTH 10G-EPON standard for general public use.
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/freebox-delta-server/
Physical and cost analysis of the Ford SYNC 3 Silverbox extracted from the latest Ford Focus.
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/ford-focus-sync-3-silverbox/
Denso’s Monocular Forward ADAS Camera in the Toyota Alphardsystem_plus
Denso has developed a new monocular forward camera for improved night vision, using Sony’s high-sensitivity 1.27M-pixel image sensor and Toshiba’s new advanced image recognition processor.
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/densos-monocular-forward-adas-camera-in-the-toyota-alphard/
A compact, cost-effective and high-performance driving assistance system.
The Mid Range Radar Sensor, with its three Transmitter and four Receiver channels, operates in the 76-77 GHz frequency band that is standard for automotive radar applications. The front version works with an aperture angle of up to +/- 45 degrees and can detect objects up to 160 meters away. With a compact design (using fan-out RF components from Infineon), the system is easy to integrate into a vehicle’s body.
The system integrates two electronic boards including Bosch, Freescale and STMicroelectronics circuits. The RF board is manufactured with an asymmetric structure using Hybrid PTFE/FR4 substrate and is equipped with planar antennas.
Infineon 77GHZ SiGe Monolithic Microwave Integrated Circuits (MMIC) are used as High-Freqency transmitter and receiver.. The two RF dies are packaged is the last version of the eWLB, the Fan-Out Wafer level Package developed and manufactured by Infineon.
SiGe based millimeter-wave chipset commercially available for
backhaul applications with beamforming capability.
More information on that report at: http://www.systemplus.fr/reverse-costing-reports/peraso-x710-chipset-60ghz-outdoor-wireless-broadband-solution/
Latest Audi Q3 instrument cluster with immobilizer: Structural and cost analysis
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/audi-bosch-fpk-generation-2-instrument-cluster/
Autoliv’s 3rd Generation Automotive Night Vision Camera with FLIR’s ISC0901 M...Yole Developpement
Infrared camera and electronic control unit for advanced driver assistance systems based on FLIR night vision imaging technology
Based on a high definition ISC0901 microbolometer from FLIR, the Autoliv night vision infrared camera targets the high-end automotive market using two FLIR cores. Based on the solid first design from 2009, the microbolometer offers better performance in definition and frame rate. The camera also embraces the quality approach with a complex optical system and powers its night vision using sophisticated numerical processing based on an Altera field-programmable gate array (FPGA) and custom algorithm.
The Autoliv night vision camera consists of two modules, the camera and a remote processing unit. The system is made very compact and easy to integrate for car makers.
The ISC0901 thermal camera uses FLIR’s 17µm pixel design, optimized for automotive applications. Based on vanadium oxide technology, the ISC0901 microbolometer features a 336x256 resolution wafer level package, achieving an incredibly compact design.
The ISC0901 is the automotive version of a surveillance microbolometer. By using wafer level package technology to encapsulate the microbolometer FLIR offers the best price performance ratio.
This report is divided into two parts, one focused on the microbolometer and the second on the other systems. It is based on a complete teardown analysis of the night vision camera and the associated electronic control unit. Using this, it provides the bill-of-material (BOM) and manufacturing cost of the infrared camera. The report also offers a complete physical analysis and manufacturing cost estimate of the infrared module, including the lens module and the microbolometer itself.
The report’s final component is a comparison between the characteristics of the FLIR ISC0901, FLIR Lepton 3 and the PICO384P from ULIS. The comparison highlights differences in technical choices made by the companies.
More information on that report at http://www.i-micronews.com/reports.html
Physical and cost analysis of the Ford SYNC 3 Display ECU extracted from the latest Ford Focus.
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/ford-focus-sync-3-display-ecu/
Discover Axis’s high-end product integrating its latest ARTPEC-7 in-house system-on-chip dedicated to network video and machine learning capabilities.
More information : https://www.systemplus.fr/reverse-costing-reports/axis-p1375-e-network-camera/
FLIR Boson – a small, innovative,low power, smart thermal camera core 2017 te...Yole Developpement
An infrared camera with a powerful vision processor in a small package, using a new 12μm microbolometer.
Based on a high definition ISC1406L micro-bolometer, the FLIR Boson thermal camera aims at a wide range of markets: military, drones, automotive, security and firefighting. Thanks to sound technological and economic choices, the microbolometer offers very good performance in definition and frame rate at low cost. The camera core’s economical approach involves new lens technology and sophisticated vision processing from Intel/Movidius to power its infrared vision.
The FLIR Boson camera core occupies only 4.9cm3 without its lens, including a 320x256 pixel microbolometer and an advanced processor. The system is made very compact and easy for integrators to handle. It includes a new chalcogenide glass for the lens and a powerful Vision Processing Unit for the first time.
More information on that report at http://www.i-micronews.com/reports.html
LG Display Medianav ECU Available in the Dacia Dustersystem_plus
A competitive high resolution, high luminance and wide viewing angle automotive display.
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/lg-display-medianav-ecu-available-in-the-dacia-duster/
Intel RealSense D435 3D Active IR Stereo Depth Camera 2018 teardown reverse c...system_plus
The 3D camera is using infrared active stereo depth and red/green/blue sensors, and a VCSEL projector.
More information on that report at http://www.systemplus.fr/reverse-costing-reports/intel-realsense-d435-3d-active-ir-stereo-depth-camera/
Delphi Integrated Radar and Camera System (RACam) 2016 teardown reverse costi...Yole Developpement
Delphi is the first to provide a single system combining 76Ghz Radar and Vision Sensing. With a compact design the system can be integrated behind the windshield and enables a broad array of active safety features, as lane tracking, collision avoidance or adaptive cruise control.
The visual detection is performed by a 1/3” CMOS Image Sensor supplied by a leader in the CIS automotive industry. The sensor is surmounted by a specific 7-lens module and the Mobileye EyeQ3 SoC is used for video processing. Concerning the radar function, Receiver and Transmitter chips from Infineon using SiGe HBT technology are assembled by wire bonding on the RF Board. The Antenna board uses a PTFE-based substrate and is equipped with planar antennas for transmission and reception of the RF signals.
Based on a complete teardown analysis of the Delphi RACam, the report provides the bill-of-material (BOM) and the manufacturing cost of the system. The report also includes analysis of the Image Sensor and Lens module. A structural analysis, with a comparison with Bosch MRR1, highlights the technical choices in RF design made by Delphi.
A physical analysis and manufacturing cost estimation of the Infineon RF chips is available in a separate report, which also includes a comparison with MMICs used in the Bosch MRR1 Radar.
More information on that report at http://www.i-micronews.com/reports.html
Analog Devices ADIS16460 6-axis MEMS Inertial Sensorsystem_plus
High precision 6-Axis Inertial Measurement Unit for industrial and harsh environments.
More information on that report at: http://www.systemplus.fr/fr/reverse-costing-reports/analog-devices-adis16460-6-axis-mems-inertial-sensor/
Orbbec’s Front 3D Depth Sensing System in the Oppo Find Xsystem_plus
The first introduction of Orbbec’s 3D front depth sensing system in a mobile application featuring a global shutter, a dot projector and a custom system-on-chip.
More information on that report at: https://www.systemplus.fr/reverse-costing-reports/orbbecs-front-3d-depth-sensing-system-in-the-oppo-find-x/
Hamamatsu Photodiode and Laser in Livox’s Horizon LiDARsystem_plus
Analysis of the six channels and 905nm pulsed laser and photodiode from Hamamatsu, in Livox’s LiDAR for automotive ADAS.
More information: https://www.systemplus.fr/reverse-costing-reports/hamamatsu-photodiode-and-laser-in-livox-horizon-lidar/
Similar to Aptiv’s Third Generation of 77 GHz-Based Short-Range Radar (SRR3) (20)
SPR21610 - Vitesco Technologies Power Module in Jaguar I-PACE Invertersystem_plus
Multiple optimized packaging innovations for this automotive power module from Vitesco Technologies.
More : https://www.systemplus.fr/reverse-costing-reports/vitesco-technologies-power-module-in-jaguar-i-pace-inverter/
SP20569 - IRay T3S Thermal Camera for Smartphonesystem_plus
Multiple optimized packaging innovations for this automotive power module from Vitesco Technologies.
More : https://www.systemplus.fr/reverse-costing-reports/iray-t3s-thermal-camera-for-smartphone/
Technical and cost overview of the evolution of radio frequency front-end module technologies integrated in 5G mmWave and Sub-6 GHz Phones.
More : https://www.systemplus.fr/reverse-costing-reports/rf-front-end-module-comparison-2021-vol-2-focus-on-5g-chipset/
Apple iPhone 12 series mmWave 5G Chipset and Antennasystem_plus
A study of the complete first generation of the 5G millimeter-wave chipset for Apple’s phones including custom antenna, front-end module and antenna-on-package.
More information : https://www.systemplus.fr/reverse-costing-reports/apple-iphone-12-series-mmwave-5g-chipset-and-antenna/
NVIDIA’s new generation Graphics Processing Unit (GPU) with TSMC CoWoS, 40GB Samsung HBM2, 2.5D and 3D packaging.
More information: https://www.systemplus.fr/reverse-costing-reports/nvidia-a100-ampere-gpu/
EPC’s 70 V ePower stage with separate and independent high and low side control inputs.
More information: https://www.systemplus.fr/reverse-costing-reports/epc2152-half-bridge-monolithic-gan-ic/
Microsoft - Holographic Lens from Hololens 2system_plus
See-through holographic display for mixed reality smartglasses.
More on : https://www.systemplus.fr/reverse-costing-reports/microsoft-holographic-lens-from-hololens-2/
Cost-effective 1 mm2 miniature camera with customizable wafer-level optics for endoscopy and novel medical imaging devices.
More information : https://www.systemplus.fr/reverse-costing-reports/ams-naneye-mini-camera/
Hikvision Intelligent Thermal Network Camera (DS-2TD2166-15 V1)system_plus
Dig deep into Hikvision’s AI-powered thermal network camera for security applications.
More information: https://www.systemplus.fr/reverse-costing-reports/hikvision-intelligent-thermal-network-camera-ds-2td2166-15-v1/
The first 600V system-in-package half-bridge driver from STMicroelectronics integrating two GaN-based HEMTs.
More information: https://www.systemplus.fr/reverse-costing-reports/stmicroelectronics-mastergan1-half-bridge-driver/
Physical and cost analysis of Micron’s fifth-generation low-power DRAM memory.
More information: https://www.systemplus.fr/reverse-costing-reports/micron-lpddr5-12gb-mobile-memory/
In-depth physical and cost analysis of Samsung’s ‘1y-nm’ low power DRAM.
More information: https://www.systemplus.fr/reverse-costing-reports/samsung-lpddr5-12gb-mobile-memory/
Safran Colibrys MS1010 and MEMSIC MXA2500M High-End Accelerometerssystem_plus
Detailed technology and cost analysis of the high-end single-axis and dual-axis accelerometers integrated in the STIM318 IMU.
More information: https://www.systemplus.fr/reverse-costing-reports/safran-colibrys-ms1010-and-memsic-mxa2500m-high-end-accelerometers/
Sensonor STIM318 Inertial Measurement Unit (IMU)system_plus
Newest IMU with 9-axis detection and gyro bias instability of 0.3°/h from Sensonor.
More information: https://www.systemplus.fr/reverse-costing-reports/sensonor-stim318-inertial-measurement-unit-imu/
Everspin’s Spin Transfer Torque MRAM with perpendicular magnetic tunnel junction.
More information: https://www.systemplus.fr/reverse-costing-reports/everspin-emd3d256m-sttmram-memory/
MEMS Fabry-Perot interferometer in a very tiny NIR spectrometer.
More information: https://www.systemplus.fr/reverse-costing-reports/spectral-engines-nirone-sensor-x/
Deep analysis of the latest generation of under-display optical fingerprint sensors using micro-optics.
Reverse Costing - Structure, process and cost report by System Plus Consulting - find more here: https://www.systemplus.fr/reverse-costing-reports/goodixs-ultra-thin-optical-in-display-fingerprint/
Broadcom AFEM-8100 System-in-Package in the Apple iPhone 11 Seriessystem_plus
Cost effective third generation of mid/high band Front-End Module with advanced and innovative packaging.
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/broadcom-afem-8100-system-in-package-in-the-apple-iphone-11-series/
Advanced System-in-Package Technology in Apple’s AirPods Prosystem_plus
Analysis of Apple’s first SiP found in the latest AirPods, featuring a fully integrated SiP for audio codec and Bluetooth connectivity.
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/advanced-system-in-package-technology-in-apples-airpods-pro/
Compare the technology and cost of 19 microphones from Knowles, Goertek, AAC Technologies, STMicroelectronics, TDK-InvenSense, TDK-Epcos, Cirrus Logic and Vesper.
Reverse Costing - Structure, process and cost report - find more here: https://www.systemplus.fr/reverse-costing-reports/consumer-mems-microphones-comparison-2020/
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
25. ORDER FORM
Please process my order for “Aptiv’s Third Generation of 77 GHz-Based
Short-Range Radar (SRR3)” Reverse Costing® – Structure, Process & Cost
Report
Ref: SP18432
Full Structure, Process & Cost Report : EUR 3,490*
Annual Subscription offers possible from 3 reports, including this
report as the first of the year. Contact us for more information.
SHIP TO
Name (Mr/Ms/Dr/Pr): .............................................................
Job Title: …….............................................................................
Company: ….............................................................................
Address: …….............................................................................
City: ………………………………… State: ..........................................
Postcode/Zip: ..........................................................................
Country: ……............................................................................
VAT ID Number for EU members: ..........................................
Tel: ……………….........................................................................
Email: .....................................................................................
Date: ......................................................................................
Signature: ..............................................................................
BILLING CONTACT
First Name : ............................................................................
Last Name: …….......................................................................
Email: …..................................................................................
Phone: ……..............................................................................
PAYMENT
By credit card:
Number: |__|__|__|__| |__|__|__|__| |__|__|__|__|
|__|__|__|__|
Expiration date: |__|__|/|__|__|
Card Verification Value: |__|__|__|
By bank transfer:
HSBC - CAE- Le Terminal -2 rue du Charron - 44800 St Herblain France
BIC code: CCFRFRPP
• In EUR
Bank code : 30056 - Branch code : 00955 - Account :
09550003234
IBAN: FR76 3005 6009 5509 5500 0323 439
• In USD
Bank code : 30056 - Branch code : 00955 - Account :
09550003247
IBAN: FR76 3005 6009 5509 5500 0324 797
REVERSE COSTING® – STRUCTURE, PROCESS & COST REPORTAPTIV'S THIRD GENERATION OF 77GHZ-BASED SHORT-RANGE RADAR (SRR3)
Each year System Plus Consulting
releases a comprehensive collection
of new reverse engineering and
costing analyses in various domains.
You can choose to buy over 12
months a set of 3, 4, 5, 7, 10 or 15
Reverse Costing® reports.
Up to 47% discount!
More than 60 reports released each
year on the following topics
(considered for 2018):
• MEMS & Sensors: Accelerometer
– Environment - Fingerprint - Gas
- Gyroscope - IMU/Combo -
Microphone - Optics - Oscillator -
Pressure
• Power: GaN - IGBT - MOSFET - Si
Diode - SiC
• Imaging: Camera - Spectrometer
• LED and Laser: UV LED – VCSEL -
White/blue LED
• Packaging: 3D Packaging -
Embedded - SIP - WLP
• Integrated Circuits: IPD –
Memories – PMIC - SoC
• RF: FEM - Duplexer
• Systems: Automotive - Consumer
- Energy - Telecom
ANNUAL SUBSCRIPTIONS
Return order by:
FAX: +33 2 53 55 10 59
MAIL: SYSTEM PLUS CONSULTING
22, bd Benoni Goullin
Nantes Biotech
44200 Nantes – France
EMAIL: sales@systemplus.fr
*For price in dollars please use the day’s
exchange rate
*All reports are delivered electronically in
pdf format
*For French customer, add 20 % for VAT
*Our prices are subject to change. Please
check our new releases and price
changes on www.systemplus.fr. The
present document is valid 6 months after
its publishing date: October 2018
26. 1.INTRODUCTION
The present terms and conditions apply to the offers, sales and deliveries of services managed by System Plus
Consulting except in the case of a particular written agreement.
Buyer must note that placing an order means an agreement without any restriction with these terms and conditions.
2.PRICES
Prices of the purchased services are those which are in force on the date the order is placed. Prices are in Euros and
worked out without taxes. Consequently, the taxes and possible added costs agreed when the order is placed will be
charged on these initial prices.
System Plus Consulting may change its prices whenever the company thinks it necessary. However, the company
commits itself in invoicing at the prices in force on the date the order is placed.
3.REBATES and DISCOUNTS
The quoted prices already include the rebates and discounts that System Plus Consulting could have granted according
to the number of orders placed by the Buyer, or other specific conditions. No discount is granted in case of early
payment.
4.TERMS OF PAYMENT
System Plus Consulting delivered services are to be paid within 30 days end of month by bank transfer except in the
case of a particular written agreement.
If the payment does not reach System Plus Consulting on the deadline, the Buyer has to pay System Plus Consulting a
penalty for late payment the amount of which is three times the legal interest rate. The legal interest rate is the
current one on the delivery date. This penalty is worked out on the unpaid invoice amount, starting from the invoice
deadline. This penalty is sent without previous notice.
When payment terms are over 30 days end of month, the Buyer has to pay a deposit which amount is 10% of the
total invoice amount when placing his order.
5. OWNERSHIP
System Plus Consulting remains sole owner of the delivered services until total payment of the invoice.
6.DELIVERIES
The delivery schedule on the purchase order is given for information only and cannot be strictly guaranteed.
Consequently any reasonable delay in the delivery of services will not allow the buyer to claim for damages or to
cancel the order.
7.ENTRUSTED GOODS SHIPMENT
The transport costs and risks are fully born by the Buyer. Should the customer wish to ensure the goods against lost or
damage on the base of their real value, he must imperatively point it out to System Plus Consulting when the
shipment takes place. Without any specific requirement, insurance terms for the return of goods will be the carrier
current ones (reimbursement based on good weight instead of the real value).
8.FORCE MAJEURE
System Plus Consulting responsibility will not be involved in non execution or late delivery of one of its duties
described in the current terms and conditions if these are the result of a force majeure case. Therefore, the force
majeure includes all external event unpredictable and irresistible as defined by the article 1148 of the French Code
Civil?
9.CONFIDENTIALITY
As a rule, all information handed by customers to system Plus Consulting are considered as strictly confidential.
A non-disclosure agreement can be signed on demand.
10.RESPONSABILITY LIMITATION
The Buyer is responsible for the use and interpretations he makes of the reports delivered by System Plus Consulting.
Consequently, System Plus Consulting responsibility can in no case be called into question for any direct or indirect
damage, financial or otherwise, that may result from the use of the results of our analysis or results obtained using
one of our costing tools.
11.APPLICABLE LAW
Any dispute that may arise about the interpretation or execution of the current terms and conditions shall be resolved
applying the French law.
It the dispute cannot be settled out-of-court, the competent Court will be the Tribunal de Commerce de Nantes.
TERMS AND CONDITIONS OF SALES