Appendix 6 prelab powerpoint
•Download as PPT, PDF•
0 likes•302 views
This document provides instructions for constructing and analyzing a simple series circuit using resistors, a voltmeter, ammeter, and voltage source. It describes safety procedures and contains a table to record voltage, current, and resistance measurements for resistors connected in series. Students are asked to calculate total resistance using measured values and Ohm's law, and to answer questions about how adding or subtracting resistance would affect current. Groups are assigned roles for the lab and instructed to switch jobs and initial any recorded data.
Report
Share
Report
Share
![Safety ,[object Object],[object Object],[object Object],[object Object],[object Object],link to electric shock jacket...](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Voltmeter - Measurement and Instruments
It includes it's symbolic representations, history, types and it's working, applications of Voltmeter.
Can be used for presentations and as a reference too.
4. Test instruments and their connections
This document discusses how various electrical measurement instruments are connected into circuits. It explains that a voltmeter is connected in parallel to measure voltage, an ammeter is connected in series to measure current, and a wattmeter uses both series and parallel connections to measure power by determining both current and voltage. An ohmmeter is also discussed, which measures impedance by connecting at each end of a circuit or load. Different types of analog meters like moving iron and moving coil meters are described along with their advantages and disadvantages. Digital meters and how they work are also covered.
MULTITESTER
The document discusses a multitester, which is an instrument that can measure voltage, current, and resistance. It explains that multitesters come in analog and digital forms. It then provides analogies to explain voltage, current, and resistance using a water tank system. The document also describes the key parts of a multitester and provides tips for proper care and maintenance.
Multitester,Wire resistivity
This powerpoint contains lessons about on how to read multimeter, on how to compute wire resistivity and also formula for computing current,volt and resistance
Electrical testing equipment clamp meters- Usage, operations and Safety
The document discusses clamp meters, which are devices used to measure electrical current without direct contact, describing their components like current transformers and iron vanes, the measurements they can take like voltage, current, resistance and frequency, and safe usage, emphasizing removing batteries for long periods of non-use and only having technicians repair units. Safety checklists are also provided.
Outcome 2.3 identify appropriate electrical instruments for the measurement...
Outcome 2.3 identify appropriate electrical instruments for the measurement and calculation of different electrical values
new lec electromag.
This document provides an outline for a course on electromagnetism, electricity, and digital electronics. The course covers topics such as the theory of electrons and electricity, resistors, Ohm's law, electric circuits, theory of magnetism, diodes, logic gates, and combinational and sequential circuits. It lists textbooks that will be used as references. The document also provides detailed explanations of concepts in atomic structure, electricity, circuits, electromagnetism, and electronics.
The Multitester
The multimeter, also known as a VOM, can measure voltage, resistance, and current. It exists in two forms, analog and digital. The analog multimeter uses a needle that moves across a scale to indicate measured values. The digital multimeter uses buttons to select functions and ranges and displays numeric readings. Both types are zeroed before measurements and have probes to connect to circuits under test.
Recommended
Voltmeter - Measurement and Instruments
It includes it's symbolic representations, history, types and it's working, applications of Voltmeter.
Can be used for presentations and as a reference too.
4. Test instruments and their connections
This document discusses how various electrical measurement instruments are connected into circuits. It explains that a voltmeter is connected in parallel to measure voltage, an ammeter is connected in series to measure current, and a wattmeter uses both series and parallel connections to measure power by determining both current and voltage. An ohmmeter is also discussed, which measures impedance by connecting at each end of a circuit or load. Different types of analog meters like moving iron and moving coil meters are described along with their advantages and disadvantages. Digital meters and how they work are also covered.
MULTITESTER
The document discusses a multitester, which is an instrument that can measure voltage, current, and resistance. It explains that multitesters come in analog and digital forms. It then provides analogies to explain voltage, current, and resistance using a water tank system. The document also describes the key parts of a multitester and provides tips for proper care and maintenance.
Multitester,Wire resistivity
This powerpoint contains lessons about on how to read multimeter, on how to compute wire resistivity and also formula for computing current,volt and resistance
Electrical testing equipment clamp meters- Usage, operations and Safety
The document discusses clamp meters, which are devices used to measure electrical current without direct contact, describing their components like current transformers and iron vanes, the measurements they can take like voltage, current, resistance and frequency, and safe usage, emphasizing removing batteries for long periods of non-use and only having technicians repair units. Safety checklists are also provided.
Outcome 2.3 identify appropriate electrical instruments for the measurement...
Outcome 2.3 identify appropriate electrical instruments for the measurement and calculation of different electrical values
new lec electromag.
This document provides an outline for a course on electromagnetism, electricity, and digital electronics. The course covers topics such as the theory of electrons and electricity, resistors, Ohm's law, electric circuits, theory of magnetism, diodes, logic gates, and combinational and sequential circuits. It lists textbooks that will be used as references. The document also provides detailed explanations of concepts in atomic structure, electricity, circuits, electromagnetism, and electronics.
The Multitester
The multimeter, also known as a VOM, can measure voltage, resistance, and current. It exists in two forms, analog and digital. The analog multimeter uses a needle that moves across a scale to indicate measured values. The digital multimeter uses buttons to select functions and ranges and displays numeric readings. Both types are zeroed before measurements and have probes to connect to circuits under test.
How to use a digital multimeter
A multimeter can measure voltage, current, and resistance. It combines the functions of a voltmeter, ammmeter, and ohmmeter into a single device. To measure voltage, the multimeter is connected in parallel across two points in a circuit. To measure current, it is connected in series so that all current passes through it. To measure resistance, the component must be removed from the circuit and the multimeter connected across it. Proper connection methods and safety precautions are required for accurate measurements.
Electrical measuring instruments
The document provides information on various electrical measuring instruments produced by Iskra MIS, including measuring centres, measuring transducers, communication adapters, digital meters, analogue meters, portable meters, equipment and accessories. Details are given on features, specifications, inputs/outputs and uses of products like the MC 320 energy meter, MC 760/UMC 760 network analyzer, MC 740 multifunction meter, MT 5x0 measuring transducers, and MI 480 GSM device for remote control. Dimensional drawings and connection diagrams are also included at the end.
How To Use A Digital Multimeter
A multimeter is used to measure voltage, resistance, and current. It is important to read the manual, know safety precautions like using insulated probes and standing on an insulating surface, and not exceed the meter's input rating. The multimeter has input terminals, a rotary switch to select the measurement function, and a battery compartment. Common symbols include COM for the common input terminal and indicators for AC and DC measurements. To measure correctly, select the appropriate function and range and connect the leads properly in series or parallel.
Digital & Analog Mulitmeters
this ppt is about Digital & Analog Mulitmeters & will help students who want to find and research on a similar topic.
How to use a digital multimeter
A multimeter is a device used to measure voltage, resistance, and current in electronics and electrical equipment. There are two main types: analog, which has a needle display, and digital, which has an LCD screen. A multimeter can measure voltage, resistance, current, and test continuity. It displays measurement values and has controls to select the measurement function and range.
Electronic Measurement Beginner's Guide
A simple introductory guide how to use basic lab measurement equipment like Digital Multimeters (DMM), oscilloscopes and function generators, this guide is meant for hobbyists, beginners and junior students.
for more discussion and articles on electronics and hardware please visit my blog: http://elrayescampaign.blogspot.ca/
Multitester
This document discusses multimeters, which are instruments that can measure voltage, current, and resistance. It describes the key differences between analog and digital multimeters. Digital multimeters display measurements as numeric readings, while analog multimeters show measurements using a movable needle on a scale. The document also outlines the main components of a multimeter, including the pointer, range selector knob, adjustment screws, scales, test probes, and zero-ohm adjustment knob. Finally, it provides tips for proper care and maintenance of a multimeter, such as reading the manual, starting with the highest measurement range, selecting the correct function, checking batteries, and storing the multimeter carefully.
Electrical measuring instruments
An electrical measuring instrument called a multimeter can measure current, voltage, and resistance. It combines the functions of an ammeter, voltmeter, and ohmmeter. There are two main types: analog multimeters display measurements on a calibrated scale with a moving pointer, while digital multimeters numerically display readings on an LCD screen and are more accurate. To measure voltage with a multimeter, you set it to the proper voltage range and place the probes across the component, observing polarity for DC measurements. Current is measured by placing the multimeter in series with the circuit. Resistance is measured by connecting the probes to each side of the component after removing it from the circuit.
How to use a digital multimeter
A multimeter is a device used to measure voltage, resistance, and current in electrical equipment. There are two main types, analog and digital. A multimeter has different ports and probe tips for measuring different electrical properties safely. The display and dials are used to select the correct function and measurement range. Common symbols seen on multimeters represent different electrical units and components. Proper connection of the multimeter leads depending on the measurement ensures accurate readings while avoiding shorts or interfering with the circuit.
Lab 2 multimeter
A multimeter is an electronic instrument that combines several measurement functions in one unit, allowing it to measure voltage, current, and resistance. An analog multimeter uses a moving pointer on a calibrated scale to display measurements, while a digital multimeter converts measurements to a digital number. This document provides instructions on using an analog multimeter to take voltage, current, and resistance measurements. It explains how to properly connect the probes and select ranges, as well as how to accurately read measurements on the analog scale.
Multimeter basics
More Basics of Electrical and Electronics can be see on http://bit.ly/2PIOIQM
A multimeter or a multitester, also known as a VOM, is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure voltage, current, and resistance. Analog multimeters use a microammeter with a moving pointer to display readings.
Multimeter Project-Abby Reisner
A multimeter is an instrument that can measure voltage, current, and resistance. It has a rotary switch to select the measurement type and jacks to connect the leads based on what is being measured. Safety precautions must always be followed like using insulated surfaces, the "left hand in pocket" technique, and never working alone with high voltages. The document provides instructions on how to select settings and connect the leads to take voltage, current, and resistance measurements.
Analog and Digital Multimeters
This document discusses analog and digital multimeters. It describes two main types of multimeters: analog VOMs that use a moving coil meter with a printed scale, and digital multimeters that provide a numerical readout. Key aspects covered include how various meters work (voltmeters use high resistance multipliers, ammeters must be in series, ohmmeters use an internal battery), applications of each type of meter, and considerations for measuring voltage, current and resistance accurately. Loading effects on circuits are also addressed.
Voltmeter
A voltmeter is an instrument used to measure voltage between two points in a circuit. Analog voltmeters use a moving coil and pointer to display voltage proportionally, while digital voltmeters (DVM) use an analog-to-digital converter to provide a numeric readout. Before DVMs, potentiometers were commonly used to measure voltage by balancing the voltage drop across a known resistor against an unknown voltage. Potentiometers work on the principle that voltage drop is proportional to distance in a uniform wire.
Digital multimeter safety tips
Digital multimeter safety tips include inspecting test leads for damage and ensuring any capacitors are discharged before taking resistance measurements. When measuring resistance, the meter generates a small current to determine the component's resistance. External voltages can damage the meter or provide inaccurate readings. It is important to disconnect power sources and discharge capacitors before taking resistance measurements to avoid electric shocks or damaging the meter. Digital multimeters should also only be used in resistance mode when checking components to prevent damage.
Analog multimeter and ohmmeter
The document discusses analog ohmmeters and multimeters. It describes how an ohmmeter uses a low-current source to measure resistance through a mechanical movement. Analog multimeters also use a mechanical movement to measure voltage, current, and resistance by changing the circuit connections. The document outlines some limitations of analog meters, such as reliance on stable battery voltage and nonlinear scales. It then describes how digital multimeters digitally display measurements and are now more common, though analog meters are still sometimes preferable for monitoring rapidly changing values.
Voltmeter
A voltmeter is an instrument used to measure voltage in an electrical circuit. It can measure alternating current (AC) or direct current (DC) between two points. There are two main types - analog voltmeters display readings on a scale, while digital voltmeters show readings numerically on an LCD or LED display. Voltmeters work based on Ohm's law, measuring the potential difference in volts across a circuit when connected to two points between which a voltage appears.
Fluke India - Clamp Meters
The presentation explains all that you need to know about Clamp Meters.
Fluke India is a leader in the manufacture, distribution and service of electronic test tools and software.
type of ohmmeter
An ohmmeter is used to measure resistance and check continuity in electrical circuits. There are two main types - series and shunt. A series ohmmeter passes current through the internal battery and unknown resistor in series, while a shunt ohmmeter connects the meter movement and unknown resistor in parallel. Ohmmeters also differ in their display - analog ohmmeters show a continuous analog reading while digital ohmmeters provide an exact digital resistance value. Common applications include determining approximate resistances, sorting resistors, and checking diodes.
Digital multimeter
This document provides an overview of how to use a digital multimeter. It describes the basic components and functions of a multimeter. A digital multimeter contains three meters in one - a voltmeter to measure voltage, an ohmmeter to measure resistance, and an ammeter to measure current. It has a digital display and a function switch dial to select the meter's function. The function switch has settings for measuring DC and AC voltage, resistance, and current. The document explains how to set the function switch to the proper setting and range for measuring voltage, resistance, and current.
Worksheet sc. notation
This document contains a worksheet with math problems involving converting numbers between scientific notation and standard notation. There are 20 problems total, with numbers given in scientific notation and standard notation that must be converted to the other notation. The problems cover exponents, multiplication, division, and operations with positive and negative exponents.
Scientific notation pbit 1
The document discusses scientific notation and rules for multiplying and dividing numbers in scientific notation. It provides examples of converting between standard and scientific notation. The key rules covered are:
1. To multiply numbers in scientific notation, multiply the decimals and add the exponents.
2. To divide numbers in scientific notation, divide the decimals and subtract the exponents. Watch the signs when subtracting exponents.
3. Students completed practice problems applying these rules and converting between standard and scientific notation using a calculator.
More Related Content
What's hot
How to use a digital multimeter
A multimeter can measure voltage, current, and resistance. It combines the functions of a voltmeter, ammmeter, and ohmmeter into a single device. To measure voltage, the multimeter is connected in parallel across two points in a circuit. To measure current, it is connected in series so that all current passes through it. To measure resistance, the component must be removed from the circuit and the multimeter connected across it. Proper connection methods and safety precautions are required for accurate measurements.
Electrical measuring instruments
The document provides information on various electrical measuring instruments produced by Iskra MIS, including measuring centres, measuring transducers, communication adapters, digital meters, analogue meters, portable meters, equipment and accessories. Details are given on features, specifications, inputs/outputs and uses of products like the MC 320 energy meter, MC 760/UMC 760 network analyzer, MC 740 multifunction meter, MT 5x0 measuring transducers, and MI 480 GSM device for remote control. Dimensional drawings and connection diagrams are also included at the end.
How To Use A Digital Multimeter
A multimeter is used to measure voltage, resistance, and current. It is important to read the manual, know safety precautions like using insulated probes and standing on an insulating surface, and not exceed the meter's input rating. The multimeter has input terminals, a rotary switch to select the measurement function, and a battery compartment. Common symbols include COM for the common input terminal and indicators for AC and DC measurements. To measure correctly, select the appropriate function and range and connect the leads properly in series or parallel.
Digital & Analog Mulitmeters
this ppt is about Digital & Analog Mulitmeters & will help students who want to find and research on a similar topic.
How to use a digital multimeter
A multimeter is a device used to measure voltage, resistance, and current in electronics and electrical equipment. There are two main types: analog, which has a needle display, and digital, which has an LCD screen. A multimeter can measure voltage, resistance, current, and test continuity. It displays measurement values and has controls to select the measurement function and range.
Electronic Measurement Beginner's Guide
A simple introductory guide how to use basic lab measurement equipment like Digital Multimeters (DMM), oscilloscopes and function generators, this guide is meant for hobbyists, beginners and junior students.
for more discussion and articles on electronics and hardware please visit my blog: http://elrayescampaign.blogspot.ca/
Multitester
This document discusses multimeters, which are instruments that can measure voltage, current, and resistance. It describes the key differences between analog and digital multimeters. Digital multimeters display measurements as numeric readings, while analog multimeters show measurements using a movable needle on a scale. The document also outlines the main components of a multimeter, including the pointer, range selector knob, adjustment screws, scales, test probes, and zero-ohm adjustment knob. Finally, it provides tips for proper care and maintenance of a multimeter, such as reading the manual, starting with the highest measurement range, selecting the correct function, checking batteries, and storing the multimeter carefully.
Electrical measuring instruments
An electrical measuring instrument called a multimeter can measure current, voltage, and resistance. It combines the functions of an ammeter, voltmeter, and ohmmeter. There are two main types: analog multimeters display measurements on a calibrated scale with a moving pointer, while digital multimeters numerically display readings on an LCD screen and are more accurate. To measure voltage with a multimeter, you set it to the proper voltage range and place the probes across the component, observing polarity for DC measurements. Current is measured by placing the multimeter in series with the circuit. Resistance is measured by connecting the probes to each side of the component after removing it from the circuit.
How to use a digital multimeter
A multimeter is a device used to measure voltage, resistance, and current in electrical equipment. There are two main types, analog and digital. A multimeter has different ports and probe tips for measuring different electrical properties safely. The display and dials are used to select the correct function and measurement range. Common symbols seen on multimeters represent different electrical units and components. Proper connection of the multimeter leads depending on the measurement ensures accurate readings while avoiding shorts or interfering with the circuit.
Lab 2 multimeter
A multimeter is an electronic instrument that combines several measurement functions in one unit, allowing it to measure voltage, current, and resistance. An analog multimeter uses a moving pointer on a calibrated scale to display measurements, while a digital multimeter converts measurements to a digital number. This document provides instructions on using an analog multimeter to take voltage, current, and resistance measurements. It explains how to properly connect the probes and select ranges, as well as how to accurately read measurements on the analog scale.
Multimeter basics
More Basics of Electrical and Electronics can be see on http://bit.ly/2PIOIQM
A multimeter or a multitester, also known as a VOM, is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure voltage, current, and resistance. Analog multimeters use a microammeter with a moving pointer to display readings.
Multimeter Project-Abby Reisner
A multimeter is an instrument that can measure voltage, current, and resistance. It has a rotary switch to select the measurement type and jacks to connect the leads based on what is being measured. Safety precautions must always be followed like using insulated surfaces, the "left hand in pocket" technique, and never working alone with high voltages. The document provides instructions on how to select settings and connect the leads to take voltage, current, and resistance measurements.
Analog and Digital Multimeters
This document discusses analog and digital multimeters. It describes two main types of multimeters: analog VOMs that use a moving coil meter with a printed scale, and digital multimeters that provide a numerical readout. Key aspects covered include how various meters work (voltmeters use high resistance multipliers, ammeters must be in series, ohmmeters use an internal battery), applications of each type of meter, and considerations for measuring voltage, current and resistance accurately. Loading effects on circuits are also addressed.
Voltmeter
A voltmeter is an instrument used to measure voltage between two points in a circuit. Analog voltmeters use a moving coil and pointer to display voltage proportionally, while digital voltmeters (DVM) use an analog-to-digital converter to provide a numeric readout. Before DVMs, potentiometers were commonly used to measure voltage by balancing the voltage drop across a known resistor against an unknown voltage. Potentiometers work on the principle that voltage drop is proportional to distance in a uniform wire.
Digital multimeter safety tips
Digital multimeter safety tips include inspecting test leads for damage and ensuring any capacitors are discharged before taking resistance measurements. When measuring resistance, the meter generates a small current to determine the component's resistance. External voltages can damage the meter or provide inaccurate readings. It is important to disconnect power sources and discharge capacitors before taking resistance measurements to avoid electric shocks or damaging the meter. Digital multimeters should also only be used in resistance mode when checking components to prevent damage.
Analog multimeter and ohmmeter
The document discusses analog ohmmeters and multimeters. It describes how an ohmmeter uses a low-current source to measure resistance through a mechanical movement. Analog multimeters also use a mechanical movement to measure voltage, current, and resistance by changing the circuit connections. The document outlines some limitations of analog meters, such as reliance on stable battery voltage and nonlinear scales. It then describes how digital multimeters digitally display measurements and are now more common, though analog meters are still sometimes preferable for monitoring rapidly changing values.
Voltmeter
A voltmeter is an instrument used to measure voltage in an electrical circuit. It can measure alternating current (AC) or direct current (DC) between two points. There are two main types - analog voltmeters display readings on a scale, while digital voltmeters show readings numerically on an LCD or LED display. Voltmeters work based on Ohm's law, measuring the potential difference in volts across a circuit when connected to two points between which a voltage appears.
Fluke India - Clamp Meters
The presentation explains all that you need to know about Clamp Meters.
Fluke India is a leader in the manufacture, distribution and service of electronic test tools and software.
type of ohmmeter
An ohmmeter is used to measure resistance and check continuity in electrical circuits. There are two main types - series and shunt. A series ohmmeter passes current through the internal battery and unknown resistor in series, while a shunt ohmmeter connects the meter movement and unknown resistor in parallel. Ohmmeters also differ in their display - analog ohmmeters show a continuous analog reading while digital ohmmeters provide an exact digital resistance value. Common applications include determining approximate resistances, sorting resistors, and checking diodes.
Digital multimeter
This document provides an overview of how to use a digital multimeter. It describes the basic components and functions of a multimeter. A digital multimeter contains three meters in one - a voltmeter to measure voltage, an ohmmeter to measure resistance, and an ammeter to measure current. It has a digital display and a function switch dial to select the meter's function. The function switch has settings for measuring DC and AC voltage, resistance, and current. The document explains how to set the function switch to the proper setting and range for measuring voltage, resistance, and current.
What's hot (20)
Viewers also liked
Worksheet sc. notation
This document contains a worksheet with math problems involving converting numbers between scientific notation and standard notation. There are 20 problems total, with numbers given in scientific notation and standard notation that must be converted to the other notation. The problems cover exponents, multiplication, division, and operations with positive and negative exponents.
Scientific notation pbit 1
The document discusses scientific notation and rules for multiplying and dividing numbers in scientific notation. It provides examples of converting between standard and scientific notation. The key rules covered are:
1. To multiply numbers in scientific notation, multiply the decimals and add the exponents.
2. To divide numbers in scientific notation, divide the decimals and subtract the exponents. Watch the signs when subtracting exponents.
3. Students completed practice problems applying these rules and converting between standard and scientific notation using a calculator.
Day 7 scientific notation
This document provides instruction on scientific notation. It includes examples of converting numbers between standard form and scientific notation. Students are given practice problems converting numbers like 4,340,000 and 3,000,000,000 between the two forms. The document also has students find mistakes in the teacher's worked examples and write the correct answers.
4.8 scientific notation small numbers - 1
The document contains examples and exercises for converting numbers between scientific notation and standard form. It provides examples of writing very small numbers in scientific notation with negative exponents. It then has students complete conversions between scientific notation and decimal form for various small numbers.
Introduction To Electronics
This document introduces basic components of DC circuits. It defines a complete circuit as one where electron flow can travel from negative to positive terminals, and an incomplete circuit as one where flow is disrupted. Circuits must have four basic components: conductors to carry current, a load that uses power, a power supply to provide energy, and optional controllers to manage the circuit. Schematic symbols represent components in schematic diagrams, which are blueprints showing a circuit's construction. Common symbols are introduced for wires, loads like LEDs, power sources like batteries and cells, and switches as controllers. Assignments include an electronics reference chart to document websites on topics.
Dc Circuit
The document discusses Kirchhoff's rules for circuit analysis and RC circuits. Kirchhoff's rules state that the sum of currents entering a junction must be 0, and the sum of potential differences in any closed loop must be 0. RC circuits have time-dependent behavior when charging and discharging based on the time constant, which is the resistance times the capacitance. The document provides examples of applying Kirchhoff's rules to solve for currents in circuits and calculating the time it takes a capacitor to charge to half its final value in an RC circuit.
Scientific notation
This document explains scientific notation, which is a way to write very large or small numbers in a more concise form. Scientific notation consists of two parts: a number between 1 and 10, and a power of 10. The document provides examples of how to convert numbers written in standard form into scientific notation by moving the decimal place and noting the exponent. It also explains how to convert numbers in scientific notation back into standard form. Practice problems and games are provided to help learn and practice scientific notation skills.
Scientific notation ppt
Scientific notation is used to write very large or very small numbers in a standardized way. It involves writing a number between 1 and 10 multiplied by a power of 10. This allows mathematicians to easily work with numbers that would otherwise be long to write out. Some examples of converting between scientific notation and standard form are given.
Scientific Notation
Scientific notation is used to express very large or small numbers. It involves moving the decimal point in a number to the right or left by a power of 10. Positive powers of 10 move the decimal point right to express large numbers, like distances between planets. Negative powers of 10 move the decimal point left to express small decimal numbers, like distances between atoms. To convert a number to scientific notation, the decimal is moved to create a number between 1 and 10, and the power of 10 indicates how many places the decimal was moved.
Sperry Electricity Basics
Electrical circuits have basic components like switches, loads, hot and neutral wires. Voltage is electrical pressure that can be alternating current (AC) or direct current (DC), while current is the flow of electrons measured in amps. Resistance is a component's opposition to current flow and is measured in ohms. Common electrical measurements include voltage, current, resistance, frequency, and temperature. Digital multimeters are typically used to measure these components and ensure circuits are functioning properly.
Scientific notation powerpoint
Scientific notation is a way to write very large or small numbers as a product of a number between 1 and 10 and a power of 10. To convert a number to scientific notation, the decimal is moved to place one non-zero digit before the decimal point, and the number of places the decimal is moved determines the exponent of 10. Numbers greater than 1 have positive exponents, while numbers less than 1 have negative exponents. Converting back to standard form moves the decimal right for positive exponents and left for negative exponents by the value of the exponent.
Lect05 handout
1) The document discusses circuits, Ohm's law, resistors, and capacitors. It provides definitions and equations for current, voltage, resistance, power, capacitance, and how these concepts relate to series and parallel circuits.
2) Key points include: current is the flow of charge, voltage causes current to flow, and resistance regulates current flow as described by Ohm's law. Resistors in series add their resistances while resistors in parallel reduce the total resistance.
3) Examples are provided to demonstrate calculating current, voltage, and resistance in series and parallel circuits using Ohm's law.
Wiring Part 4 : ohms law
This PowerPoint gives the information about Ohms law also explains different terms related to Ohms law ….
Viewers also liked (13)
Similar to Appendix 6 prelab powerpoint
2.9 understanding electricity
Electricity is the flow of electric charge through a circuit. Voltage measures the energy carried between two points and is measured using a voltmeter, which is connected in parallel. Current measures the flow of charge and is measured using an ammeter, which must be connected in series. To troubleshoot a circuit, a technician would use a voltmeter and ammeter to check for breaks and measure the voltage and current.
LAB report basic dc meter design
This lab aimed to design basic DC meters to measure current and voltage. For the ammeter, the resistance of the meter movement was found to be 344.68 Ω. Using this value, a shunt resistor of 14.37 Ω was calculated. Testing showed the designed ammeter had an average error of 1.815% compared to a multimeter. A voltmeter was also designed using a meter movement and 49,655 kΩ resistor, which tested with an average 6.06% error. Finally, voltage dividers were analyzed theoretically and with the designed voltmeter, showing close agreement.
class6_lab.ppt
The document describes a lab experiment on circuit analysis conducted by students at George Washington University. The objectives are to construct and analyze series and parallel circuits using resistors and diodes. Students will use a breadboard, power supply and multimeter to build circuits matching given diagrams and measure voltages to verify circuit behavior based on Ohm's Law calculations of current and resistance values.
elec_basics (1).ppt
This document provides an introduction to electricity, including its behavior at the atomic level. It discusses how electricity is created through the movement of electrons between atoms. At the atomic level, atoms are made up of protons, neutrons, and electrons. The number of protons determines the element. Electricity flows as electrons move between unfilled valence orbits of atoms. Conductors have atoms with unfilled orbits that allow electron flow, while insulators have filled orbits preventing flow. Ohm's law defines the relationship between voltage, current, and resistance in circuits. Circuits can be connected in series or parallel, and Kirchhoff's laws apply to each. Power is the product of current and voltage and measured in watts.
Basic Electricity
The document provides an introduction to electricity, including its behavior at the atomic level. It describes how electricity is created through the movement of electrons between atoms. It also explains key concepts in electrical circuits such as voltage, current, resistance, and Ohm's law. Circuit configurations such as series and parallel are defined, and equations like Kirchhoff's laws are presented for analyzing circuits.
Electricity
This document provides an introduction to electricity, including:
1) It explains electricity at the atomic level, describing atoms, protons, neutrons, electrons, and electron orbitals.
2) It introduces concepts of conductors and insulators, explaining that conductors have 1-3 valence electrons allowing electron flow between atoms, while insulators have 5-8 valence electrons making flow difficult.
3) It describes the basics of electrical circuits, including current, voltage, resistance, and Ohm's Law, and how to measure these properties with a multimeter. Kirchhoff's Laws for series and parallel circuits are also introduced.
0.2.ppt/963683853838386386383685635635434534
The document provides an introduction to electricity, including its behavior at the atomic level. It describes how electricity is created through the movement of electrons between atoms. It also explains key concepts in electrical circuits such as voltage, current, resistance, and Ohm's law. Circuit configurations such as series and parallel are defined, and equations like Kirchhoff's laws are presented for analyzing circuits.
Electric circuits 1 series-parallel
This document describes electric circuits and the differences between series and parallel circuits. It includes:
- Descriptions of circuit components like cells, batteries, resistors, and switches used to draw circuit diagrams.
- Explanations of how current, voltage, and resistance work in series circuits compared to parallel circuits. In series circuits, the same current flows through each component and voltage drops add up. In parallel circuits, currents split and voltages are equal across each branch.
- Examples of calculating current, voltage, resistance, power, and solving circuit problems for both series and parallel circuits using formulas like Ohm's law.
Process Instrumentation & Control
Introduction to electrical circuit theory and process instrumentation and control as it applies to the day to day operation in a Chemical plants.
Dc voltage
The document describes how to measure electric voltage and current in a direct current (DC) circuit. It explains how to use a digital voltmeter and ammeter to measure the voltage of a 6 volt dry cell and the current passing through a lamp. It also shows how to use an oscilloscope to measure voltage. The document then discusses the laws of voltages and currents in series and parallel circuits, demonstrating that in series circuits the current is the same in all components and the voltages add, while in parallel circuits the voltage is the same across all components and the currents add.
ohm's law and circuits
This document discusses Ohm's law and basic circuit concepts. It defines key terms like voltage, current, resistance, power, and energy. It explains that voltage is directly proportional to current based on Ohm's law. Circuits can be connected in series or parallel, and examples show how to calculate current, voltage, resistance, and power in different circuit configurations using Ohm's law.
2426Lab7Series&ParallelCircuits
1. The document describes an experiment to measure and compare current and voltage in series and parallel circuits using resistors and circuit boards. Resistors in series experience the same current but their voltages add up to the total. Resistors in parallel experience the same voltage but their currents combine.
2. The experiment involves building series and parallel circuits with different resistor combinations and measuring current, voltage, and calculating equivalent resistance using Ohm's Law. Data is recorded and analyzed to determine relationships between voltages in series and parallel circuits.
ELECTRICITY
- Electrical circuits require a closed loop for current to flow. Current is the flow of electrons through a circuit. Voltage is the "push" that drives current through a circuit. Resistance opposes the flow of current.
- Ohm's Law states that current is directly proportional to voltage and inversely proportional to resistance. It is represented by the equation I=V/R.
- Circuits can be connected in series or parallel. In a series circuit, the same current flows through each component and the total voltage is shared between components. In a parallel circuit, the voltage is the same across each branch but the current splits across multiple paths.
Aisuphysics
This document provides an outline and overview for a course on fundamentals of electricity and electronics. The course covers topics such as basic electrical terms, circuits, instruments, materials, and safety. It includes sections on topics like fundamentals, basic circuits, motors/generators, advanced circuits, electronic communication systems, and labs/projects. Safety is emphasized throughout, including proper use of tools and protective equipment when working with electrical systems.
The iot academy_embeddedsystems_training_basicelectronicspart1
The document provides an overview of basic electronics concepts including:
- The components of electricity such as voltage, current, and resistance.
- How to use a volt-ohm-meter to measure voltage, current, and resistance. Safety precautions are discussed.
- Circuit diagrams and the symbols used to represent common electronic components like resistors, capacitors, diodes, and transistors.
- Resistors including how resistance is defined, resistor color codes to determine resistance values, and how resistors function in series and parallel circuits.
Circular pararel series
1. The document summarizes an experiment on arranging resistors in series and parallel circuits. The objectives were to learn about and measure current and voltage in such circuits.
2. Key concepts covered include how current and voltage are distributed in series versus parallel circuits based on Ohm's law. In series circuits, the same current flows through each resistor while the voltages add up. In parallel circuits, the same voltage is applied to each resistor while the currents combine.
3. The experiment involved assembling series and parallel circuits on a project board using colored resistors, a power supply, and multimeter. Current and voltage measurements were taken for each circuit and recorded in tables to analyze.
eem-2020309.pdf
This document provides instructions for experiments to be conducted in an electrical and electronic measurements laboratory. It includes 12 experiments such as using various meters and bridges to measure resistance, insulation resistance, power, power factor, and calibrating instruments. Specific experiments include using a voltmeter and ammeter to measure medium resistances, using a Megger to measure insulation resistance, using two wattmeters to measure power in a three-phase system, and using Kelvin's double bridge to measure low resistances. Procedures and connections for each experiment are described.
Ohms law
Dear student, Cheap Assignment Help, an online tutoring company, provides students with a wide range of online assignment help services for students studying in classes K-12, and College or university. The Expert team of professional online assignment help tutors at Cheap Assignment Help .COM provides a wide range of help with assignments through services such as college assignment help, university assignment help, homework assignment help, email assignment help and online assignment help. Our expert team consists of passionate and professional assignment help tutors, having masters and PhD degrees from the best universities of the world, from different countries like Australia, United Kingdom, United States, Canada, UAE and many more who give the best quality and plagiarism free answers of the assignment help questions submitted by students, on sharp deadline. Cheap Assignment Help .COM tutors are available 24x7 to provide assignment help in diverse fields - Math, Chemistry, Physics, Writing, Thesis, Essay, Accounting, Finance, Data Analysis, Case Studies, Term Papers, and Projects etc. We also provide assistance to the problems in programming languages such as C/C++, Java, Python, Matlab, .Net, Engineering assignment help and Finance assignment help. The expert team of certified online tutors in diverse fields at Cheap Assignment Help .COM available around the clock (24x7) to provide live help to students with their assignment and questions. We have also excelled in providing E-education with latest web technology. The Students can communicate with our online assignment tutors using voice, video and an interactive white board. We help students in solving their problems, assignments, tests and in study plans. You will feel like you are learning from a highly skilled online tutor in person just like in classroom teaching. You can see what the tutor is writing, and at the same time you can ask the questions which arise in your mind. You only need a PC with Internet connection or a Laptop with Wi-Fi Internet access. We provide live online tutoring which can be accessed at anytime and anywhere according to student’s convenience. We have tutors in every subject such as Math, Chemistry, Biology, Physics and English whatever be the school level. Our college and university level tutors provide engineering online tutoring in areas such as Computer Science, Electrical and Electronics engineering, Mechanical engineering and Chemical engineering. Regards http://www.cheapassignmenthelp.com/ http://www.cheapassignmenthelp.co.uk/
Ohms law
Ohm's Law describes the relationship between voltage, current, and resistance in an electrical circuit. Voltage is the "push" of electricity and is measured in volts. Current is the flow of electricity and is measured in amps. Resistance opposes the flow of current and is measured in ohms. Ohm's Law states that current is directly proportional to voltage and inversely proportional to resistance. Using Ohm's Law, the voltage, current, or resistance in a circuit can be calculated if two of the three values are known. Resistors are used to decrease voltage in a circuit and are marked with color bands to indicate their resistance value. Circuits can be connected in series or parallel, and understanding circuit diagrams
Lab report 2
This document summarizes an experiment to verify Ohm's law and analyze resistive circuits. The experiment has two parts: 1) Develop a voltage-current characteristic curve for a resistor to verify Ohm's law. Measure voltage and current at increasing voltage levels and plot the relationship. 2) Determine voltages and currents in series and parallel resistor circuits using voltage and current divider rules. Measure voltages across individual resistors in series to verify calculations match measurements.
Similar to Appendix 6 prelab powerpoint (20)
The iot academy_embeddedsystems_training_basicelectronicspart1
The iot academy_embeddedsystems_training_basicelectronicspart1
Recently uploaded
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdThe simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaPCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Recently uploaded (20)
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Appendix 6 prelab powerpoint
- 1. Electrical Circuits Pre-Lab Constructing and Analyzing A Simple Series Circuit
- 3. Materials Voltmeter Voltage Source Resistors Breadboard + = Ammeter
- 4. Finding the value of the unknown resistor using Ohm’s Law Voltage (V) is measured in Volts (V) Current (I) is measured in Amperes (A) Resistance (R) is measured in Ohms (Ω)