The use ofbiodiesel inconventional diesel engines resultsinsubstantialreductionof unburnedhydrocarbon,carbon
monoxideand particulatematters. The performance, emission and characteristics of a single cylinder four stroke
variable compression ratio multi fuel engine when fueled with mustard oil methyl ester and its 10%, 20%, and
blends with diesel (on a volume basis) are investigated and compared with standard diesel. Bio diesel
produced from mustard oil by transesterificationprocess has been used in this study. Experiment has been
conducted a compressionratios of 14:1, 16:1and 18:1 The impact of compression ratio on fuel consumption, and
exhaust gas emissions has been investigated and presented. Optimum compression ratio which gives best
performance has been identified. The blends when used as fuel results in reduction of carbon monoxide,
hydrocarbon and nitrogen oxides emissions. It is concluded that mustard oil ester can be used as fuel in diesel
engine by blending it with diesel fuel.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
The use ofbiodiesel inconventional diesel engines resultsinsubstantialreductionof unburnedhydrocarbon,carbon
monoxideand particulatematters. The performance, emission and characteristics of a single cylinder four stroke
variable compression ratio multi fuel engine when fueled with mustard oil methyl ester and its 10%, 20%, and
blends with diesel (on a volume basis) are investigated and compared with standard diesel. Bio diesel
produced from mustard oil by transesterificationprocess has been used in this study. Experiment has been
conducted a compressionratios of 14:1, 16:1and 18:1 The impact of compression ratio on fuel consumption, and
exhaust gas emissions has been investigated and presented. Optimum compression ratio which gives best
performance has been identified. The blends when used as fuel results in reduction of carbon monoxide,
hydrocarbon and nitrogen oxides emissions. It is concluded that mustard oil ester can be used as fuel in diesel
engine by blending it with diesel fuel.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Performance, Combustion and Emission Evaluation of Fish and Corn Oil as subst...IDES Editor
The indiscriminate usage of fossil fuels in many
countries has led to an increased interest in the search for
suitable alternative fuels. Methyl Esters of Vegetable oils and
Animal fats are found to be good alternative, renewable and
environmental friendly fuels for C.I. engines.
This paper presents the results of investigation carried
out in studying the properties and behavior of methyl esters
of corn seed oil, fish oil and its blends with diesel fuel in a C
I Engine. Engine tests have been carried out to determine the
performance, emission and combustion characteristics of the
above mentioned fuels.
The tests have been carried out in a 4-stroke,
computerized, single cylinder, constant speed, direct injection
diesel engine at different loads. The loads were varied from
0% to 100% of the maximum load in steps of 25%. The Methyl
Ester blends of 10%, 20% and 30% by volume with diesel were
used. The engine test parameters were recorded with the help
of engine analysis software and were studied with the help of
graphs.
The results showed that the properties of the above mentioned
oils are comparable with conventional diesel. The 20% blend
performed well in running a diesel engine at a constant speed
of 1500 rpm. It substantially reduced the emissions with
acceptable efficiency. Hence the oils can be used as suitable
additives for diesel in compression ignition engine.
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
call for paper 2012, hard copy of journal, research paper publishing, where to publish research paper,
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals
This project aims at a comparative study on Performance, Emission and
Combustion characteristics of Biodiesel when blended with Barium Oxide
nanoparticles in single cylinder DI Diesel Engine. Because of modernizations and
increase in number of automobiles worldwide, the consumption of diesel has
massively increased. As petroleum is non-renewable major source of energy and its
reserves are scare now a days, there is a need for research in finding alternative fuels
for automobiles. And also Bio diesels are renewable, nontoxic and eco-friendly fuels
that can play an important role in automobile industries. And this paper deals with the
transesterification of biological seed oil by means of methanol in presence potassium
hydroxide catalyst. The viscosity of biodiesel produced from biological seed oil is
nearer to that of the commercially available diesel. The biological seed oil is analyzed
by Gas chromatography and the important properties of biodiesel such as density,
flash point, cloud point, carbon residue are found out and compared with that of
ASTM – biodiesel standards and commercially available diesel
Performance evaluation of lhr engine using palm stearn methyl ester oil with ...eSAT Journals
Abstract Now a days for any country energy resourses in particular petroleum products have become important for its development. The products derived from crude oil continued to be the major and critical source of energy for transportation sector all over the world. For economic development of any country both industries and transportation sectors are very important for a growth of country like India. It is strongly depends on transportation and power generation. It is learnt that the fossil fuel are depleting at faster rate than expected. Hence the increasing demand of fossil fuel leads to exhaust of petroleum products in near future. In this connection the rising price of petroleum products and environmental concern lead to intensive studies on the use of alternative fuels. Any alternative fuel which find suitable as substitute to diesel is comparatively inferior to diesel in performance, emission and combustion characteristics. Hence there is a need to improve and optimize the fuel properties. In the present work an attempt is made to improve the performance of CI diesel engine using Vegetable oil ester. Hence in this work palm stern methyl ester is used with a modified piston geometry and LHR using concepts. The experiments are carried out on a 4-stroke single cylinder CI diesel engine of 5.2 KW. The experiments are conducted repeatedly with diesel fuel and palm stern methyl ester. Since these oils have slightly longer ignition delay, The low heat rejection engine concept is used in this work. In order to convert the base engine has LHR engine the piston crown is coated with partially stabilized zirconium PSZ of 0.5 mm thickness. From the results it is observed that the modified piston geometry with LHR engine concept has considerably given superior all round performance. Keywords: LHR Engine, Stearn Methyl Ester Oil, Piston Geometry, Piston Geometry
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
EFFECT OF INJECTION PRESSURE ON PERFORMANCE PARAMETERS AND COMBUSTION CHARA...IAEME Publication
As a renewable, sustainable and alternative fuel for compression ignition engines, biodiesel instead of diesel has been increasingly fueled to study its effects on engine performances and emissions in the recent 10 years. But these studies have been rarely reviewed to favor understanding and popularization for biodiesel so far in conventional diesel engines. Biodiesels derived from vegetable oils present a very promising alternative for diesel fuel, since they have numerous advantages compared to fossil fuels.
EXPERIMENTAL INVESTIGATIONS ON PERFORMANCE PARAMETERS OF HIGH GRADE SEMI ADIA...IAEME Publication
Biodiesels derived from vegetable oils present a very promising alternative for diesel fuel, since they have numerous advantages compared to fossil fuels. They are renewable, biodegradable, provide energy security and foreign exchange savings besides addressing environmental concerns and socio–economic issues. However drawbacks associated with biodiesel of high viscosity and low volatility which cause combustion problems in CI engines, call for engine with hot combustion chamber.
Experimental Studies on Performance and Emission Characteristics of Fish Oil ...IJERA Editor
Biodiesel is one of the most versatile alternative fuel options for direct injection CI engine applications. In the recent research of biodiesel in India receives its attention towards fish oil based biodiesel. The present work aimed at production of biodiesel from the fish oil extracted from marine fish species by transesterification process which is used as fuel in direct injection CI engine to evaluate its performance, and emission characteristics at different injection opening pressures of 190bar, 200bar, 210bar. The different blends of fish oil biodiesel with diesel, B10, B20, B30, B40, B50 and B100 were used in the experiments and the results indicate that brake thermal efficiency were higher with B30 blend fuel than that of diesel at 210bar as compared at 190bar and 200bar. The brake specific energy consumption for B30 blend at 210bar shows better results than that of diesel. By considering these two performance parameters B30 blend at 210 bar injection opening pressure is taken as optimum. At full load for B30 fuel at 210bar injection opening pressure the emission results shows that there is increase in NOx and CO2 emission but reduction in CO and HC emissions by 20% and 15.55% respectively with reference to diesel fuel.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Performance & Emissions Characteristics of a Four Stroke Diesel Engine Fuelle...IJERA Editor
Diesel engines are used for automotive application because they have lower specific fuel consumption and superior efficiency compared to S.I engines. However in spite of these advantages NOx and smoke emissions from the diesel engines cause serious environmental problems. In the present work, biodiesel was produced from Palmyra oil. In this present work, investigations were carried out to study the performance, emission and combustion characteristics of Palmyra oil. The results were compared with diesel fuel, and the selected Palmyra oil fuel blends. For this experiment a single cylinder, four stroke, water cooled diesel engine was used. Tests were carried out over entire range of engine operation at varying conditions of load. To increase the engine performance parameters and to decrease the exhaust gas emissions with increase biodiesel concentration. The experimental results provide that the use of biodiesel in compression ignition engine is a viable alternative to diesel. Additive to add the Ethanol. The blending percentage in the steps of 10%, 20% & 30%.
Recent advances in the evidence base for technology-based behavioral health applications have provided clinicians a better understanding and guidance on the integration of these tools into clinical care. Participants will learn about research findings on current technologies in use in clinical practice, such as audio conferencing, video conferencing, and virtual reality, in addition to tools available for use between patients, such as the use of websites and mobile applications and wearable sensors.
Engines of Success for U.S. Health Reform?
Eric B. Larson, MD, MPHVice President for Research, Group Health Executive Director, Group Health Research Institute
Performance, Combustion and Emission Evaluation of Fish and Corn Oil as subst...IDES Editor
The indiscriminate usage of fossil fuels in many
countries has led to an increased interest in the search for
suitable alternative fuels. Methyl Esters of Vegetable oils and
Animal fats are found to be good alternative, renewable and
environmental friendly fuels for C.I. engines.
This paper presents the results of investigation carried
out in studying the properties and behavior of methyl esters
of corn seed oil, fish oil and its blends with diesel fuel in a C
I Engine. Engine tests have been carried out to determine the
performance, emission and combustion characteristics of the
above mentioned fuels.
The tests have been carried out in a 4-stroke,
computerized, single cylinder, constant speed, direct injection
diesel engine at different loads. The loads were varied from
0% to 100% of the maximum load in steps of 25%. The Methyl
Ester blends of 10%, 20% and 30% by volume with diesel were
used. The engine test parameters were recorded with the help
of engine analysis software and were studied with the help of
graphs.
The results showed that the properties of the above mentioned
oils are comparable with conventional diesel. The 20% blend
performed well in running a diesel engine at a constant speed
of 1500 rpm. It substantially reduced the emissions with
acceptable efficiency. Hence the oils can be used as suitable
additives for diesel in compression ignition engine.
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
call for paper 2012, hard copy of journal, research paper publishing, where to publish research paper,
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals
This project aims at a comparative study on Performance, Emission and
Combustion characteristics of Biodiesel when blended with Barium Oxide
nanoparticles in single cylinder DI Diesel Engine. Because of modernizations and
increase in number of automobiles worldwide, the consumption of diesel has
massively increased. As petroleum is non-renewable major source of energy and its
reserves are scare now a days, there is a need for research in finding alternative fuels
for automobiles. And also Bio diesels are renewable, nontoxic and eco-friendly fuels
that can play an important role in automobile industries. And this paper deals with the
transesterification of biological seed oil by means of methanol in presence potassium
hydroxide catalyst. The viscosity of biodiesel produced from biological seed oil is
nearer to that of the commercially available diesel. The biological seed oil is analyzed
by Gas chromatography and the important properties of biodiesel such as density,
flash point, cloud point, carbon residue are found out and compared with that of
ASTM – biodiesel standards and commercially available diesel
Performance evaluation of lhr engine using palm stearn methyl ester oil with ...eSAT Journals
Abstract Now a days for any country energy resourses in particular petroleum products have become important for its development. The products derived from crude oil continued to be the major and critical source of energy for transportation sector all over the world. For economic development of any country both industries and transportation sectors are very important for a growth of country like India. It is strongly depends on transportation and power generation. It is learnt that the fossil fuel are depleting at faster rate than expected. Hence the increasing demand of fossil fuel leads to exhaust of petroleum products in near future. In this connection the rising price of petroleum products and environmental concern lead to intensive studies on the use of alternative fuels. Any alternative fuel which find suitable as substitute to diesel is comparatively inferior to diesel in performance, emission and combustion characteristics. Hence there is a need to improve and optimize the fuel properties. In the present work an attempt is made to improve the performance of CI diesel engine using Vegetable oil ester. Hence in this work palm stern methyl ester is used with a modified piston geometry and LHR using concepts. The experiments are carried out on a 4-stroke single cylinder CI diesel engine of 5.2 KW. The experiments are conducted repeatedly with diesel fuel and palm stern methyl ester. Since these oils have slightly longer ignition delay, The low heat rejection engine concept is used in this work. In order to convert the base engine has LHR engine the piston crown is coated with partially stabilized zirconium PSZ of 0.5 mm thickness. From the results it is observed that the modified piston geometry with LHR engine concept has considerably given superior all round performance. Keywords: LHR Engine, Stearn Methyl Ester Oil, Piston Geometry, Piston Geometry
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
EFFECT OF INJECTION PRESSURE ON PERFORMANCE PARAMETERS AND COMBUSTION CHARA...IAEME Publication
As a renewable, sustainable and alternative fuel for compression ignition engines, biodiesel instead of diesel has been increasingly fueled to study its effects on engine performances and emissions in the recent 10 years. But these studies have been rarely reviewed to favor understanding and popularization for biodiesel so far in conventional diesel engines. Biodiesels derived from vegetable oils present a very promising alternative for diesel fuel, since they have numerous advantages compared to fossil fuels.
EXPERIMENTAL INVESTIGATIONS ON PERFORMANCE PARAMETERS OF HIGH GRADE SEMI ADIA...IAEME Publication
Biodiesels derived from vegetable oils present a very promising alternative for diesel fuel, since they have numerous advantages compared to fossil fuels. They are renewable, biodegradable, provide energy security and foreign exchange savings besides addressing environmental concerns and socio–economic issues. However drawbacks associated with biodiesel of high viscosity and low volatility which cause combustion problems in CI engines, call for engine with hot combustion chamber.
Experimental Studies on Performance and Emission Characteristics of Fish Oil ...IJERA Editor
Biodiesel is one of the most versatile alternative fuel options for direct injection CI engine applications. In the recent research of biodiesel in India receives its attention towards fish oil based biodiesel. The present work aimed at production of biodiesel from the fish oil extracted from marine fish species by transesterification process which is used as fuel in direct injection CI engine to evaluate its performance, and emission characteristics at different injection opening pressures of 190bar, 200bar, 210bar. The different blends of fish oil biodiesel with diesel, B10, B20, B30, B40, B50 and B100 were used in the experiments and the results indicate that brake thermal efficiency were higher with B30 blend fuel than that of diesel at 210bar as compared at 190bar and 200bar. The brake specific energy consumption for B30 blend at 210bar shows better results than that of diesel. By considering these two performance parameters B30 blend at 210 bar injection opening pressure is taken as optimum. At full load for B30 fuel at 210bar injection opening pressure the emission results shows that there is increase in NOx and CO2 emission but reduction in CO and HC emissions by 20% and 15.55% respectively with reference to diesel fuel.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Performance & Emissions Characteristics of a Four Stroke Diesel Engine Fuelle...IJERA Editor
Diesel engines are used for automotive application because they have lower specific fuel consumption and superior efficiency compared to S.I engines. However in spite of these advantages NOx and smoke emissions from the diesel engines cause serious environmental problems. In the present work, biodiesel was produced from Palmyra oil. In this present work, investigations were carried out to study the performance, emission and combustion characteristics of Palmyra oil. The results were compared with diesel fuel, and the selected Palmyra oil fuel blends. For this experiment a single cylinder, four stroke, water cooled diesel engine was used. Tests were carried out over entire range of engine operation at varying conditions of load. To increase the engine performance parameters and to decrease the exhaust gas emissions with increase biodiesel concentration. The experimental results provide that the use of biodiesel in compression ignition engine is a viable alternative to diesel. Additive to add the Ethanol. The blending percentage in the steps of 10%, 20% & 30%.
Recent advances in the evidence base for technology-based behavioral health applications have provided clinicians a better understanding and guidance on the integration of these tools into clinical care. Participants will learn about research findings on current technologies in use in clinical practice, such as audio conferencing, video conferencing, and virtual reality, in addition to tools available for use between patients, such as the use of websites and mobile applications and wearable sensors.
Engines of Success for U.S. Health Reform?
Eric B. Larson, MD, MPHVice President for Research, Group Health Executive Director, Group Health Research Institute
PERFORMANCE AND COMBUSTION CHARACTERISTICS OF SINGLE CYLINDER DIESEL ENGINE F...IAEME Publication
The experimental investigation is made to estimate the combustion and performance characteristics of direct injection diesel engine using different blends of karanja methyl ester with diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel engine. The combustion parameters were found close to that of diesel. The blend of karanja biodiesel performed complete and smoother combustion process than diesel.
Performance and combustion characteristics of single cylinder diesel engine f...Er Sandeep Duran
The experimental investigation is made to estimate the combustion and performance
characteristics of direct injection diesel engine using different blends of karanja methyl ester with
diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume
and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel
engine. The combustion parameters were found close to that of diesel. The blend of karanja biodiesel
performed complete and smoother combustion process than diesel. The various parameters values
like brake thermal efficiency, and heat equivalent to useful work wererecorded nearest to diesel. The
fuel air ratio also recorded higher than diesel. Whereas the mean gas temperature for pure karanja
biodiesel was higher than diesel which is on account of complete combustion on account of 10-12%
fuel bound oxygen. On the basis of brake thermal efficiency, KB20 blend was found to be the best
blend.
Performance and combustion characteristics of single cylinder diesel engine f...Er Sandeep Duran
The experimental investigation is made to estimate the combustion and performance characteristics of direct injection diesel engine using different blends of karanja methyl ester with diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel
engine. The combustion parameters were found close to that of diesel.
Jatropha oil with exhaust heat recovery system 2-3-4-jatropha oil with exhaus...Mehul Joshie
The jatropha oil is used
in a Field Marshal make four stroke, single cylinder and water cooled diesel engine. Engine
performance (specific fuel consumption, brake thermal efficiency and exhaust gas
temperature were measured to evaluate and compute the behavior of the diesel engine
running on Jatropha curcas oil. Output of the engine is almost similar to diesel fuelled engine,
however fuel consumption rate in case of Jatropha oil was more compared to diesel.
Parametric Optimization of Single Cylinder Diesel Engine for Pyrolysis Oil an...IOSR Journals
Abstract: An experimental study has been carried out for pyrolysis oil blended with diesel used in single
cylinder diesel engine. Pyrolysis oil is obtained from tire waste by pyrolysis process. Pyrolysis process is a
thermo-chemical decomposition of organic matter in absence of oxygen. Blending of pyrolysis oil with diesel in
maximum possible proportion helps to reduce the consumption of diesel fuel. In this study, the effects of
parameters i.e. injection timing, injection pressure, compression ratio, and load are taken as variable for
optimization. As the experiment required simultaneously optimization of four parameters with five levels,
taguchi method of optimization is used in this experiment. The results of the taguchi experiment identifies that
220 injection timing, injection pressure 200 bar, compression ratio 16 and engine load 20kg are optimum
parameter setting for lowest break specific fuel consumption. Engine performance is mostly influenced by
engine load and is least influenced by Compression ratio.
Keyword: Pyrolysis oil, SFC, Taguchi Analysis, CI engine, Diesel
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Ijaems apr-2016-2 Experimental Parametric Study of Biodiesel to Develop Econo...INFOGAIN PUBLICATION
In this globalization realm, there in constant growth in the rate of expenditure of fossil fuels, consequent on ever increasing population and urbanization. This gives charge to depletion of finite resources in the near future. Fossil fuel emission causes global-warming also green-house gases are intangible factor which collectively degrading the planet. As such, the situation demands for an alternate source of energy that can be used to overcome the conjectured energy crisis. In contrast to this, if the energy source is clean and renewable, it will reduce the environmental trouble as well. In the quest an alternate and renewable energy resources, scientists have plead with a variety of options among which biodiesel-diesel blends as alternative fuels has become a popular option and is getting the attention of many researchers. This is because scientists have enlist the properties of biodiesel prepared from vegetable oils are very close to commercial diesel and thus it has a promising future as an alternative fuel for diesel engine. Biodiesel being renewable, biodegradable and green fuel can reduce our dependence on conventional/non-renewable fossil fuels and it also helps to keep pure quality of air by reducing obnoxious automotive/vehicular emissions. Possible solution of this problem is to replace or find renewable and economically feasible fuel as an alternative source. Already a lot of work for source which fulfill the criteria of sustainability and economical carried out. But the effluent is critical issues. So characterization and formation of biodiesel with zero effluent is prime objective.
The experimental investigation is made to estimate the combustion and performance
characteristics of direct injection diesel engine using different blends of karanja methyl ester with
diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume
and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel
engine. The combustion parameters were found close to that of diesel. The blend of karanja biodiesel
performed complete and smoother combustion process than diesel. The various parameters values
like brake thermal efficiency, and heat equivalent to useful work wererecorded nearest to diesel. The
fuel air ratio also recorded higher than diesel. Whereas the mean gas temperature for pure karanja
biodiesel was higher than diesel which is on account of complete combustion on account of 10-12%
fuel bound oxygen. On the basis of brake thermal efficiency, KB20 blend was found to be the best
blend.
PERFORMANCE AND EMISSION CHARACTERISTIC OF DI DIESEL ENGINE WITH PREHEATING C...IAEME Publication
In this experimental investigation, the corn oil methyl ester (COME) was prepared by transesterification using corn oil, methyl alcohol and potassium hydroxide (KOH) as a catalyst. The fuel properties of bio-diesel such as kinematic viscosity and specific gravity were found within limited of BIS standard. At different preheated temperatures of COME, the performance and exhaust emission characteristics of a diesel engine fuelled with preheated bio-diesel were obtained and
compared with neat diesel.
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath