This document summarizes an experimental study that investigated the performance and emission characteristics of a direct injection compression ignition diesel engine fueled with preheated chicken fat biodiesel. The engine performance, combustion characteristics, and exhaust emissions were tested and compared for petroleum diesel, unheated chicken fat biodiesel, and chicken fat biodiesel preheated to 50°C. Results showed that preheating the chicken fat biodiesel improved engine performance by reducing fuel consumption and brake specific fuel consumption. Preheating also improved combustion and lowered exhaust emissions of carbon monoxide and unburned hydrocarbons compared to unheated chicken fat biodiesel. The study concluded that preheated chicken fat biodiesel can be used
The experimental investigation is made to estimate the combustion and performance
characteristics of direct injection diesel engine using different blends of karanja methyl ester with
diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume
and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel
engine. The combustion parameters were found close to that of diesel. The blend of karanja biodiesel
performed complete and smoother combustion process than diesel. The various parameters values
like brake thermal efficiency, and heat equivalent to useful work wererecorded nearest to diesel. The
fuel air ratio also recorded higher than diesel. Whereas the mean gas temperature for pure karanja
biodiesel was higher than diesel which is on account of complete combustion on account of 10-12%
fuel bound oxygen. On the basis of brake thermal efficiency, KB20 blend was found to be the best
blend.
Effect of injection pressure on performance and emission analysis of ci engin...eSAT Journals
Abstract Gradual depletion of world petroleum reserves and increase in the exhaust emissions day by day have led to an urgent need for alternative fuels to replace diesel. Vegetable oils biodiesel is considered as an alternative for diesel because of their properties which have been close to pure diesel. In the present study non edible vegetable oils like Honge and Jatropha oils biodiesel and their blends were used as fuel in a constant speed direct injection diesel engine. Further effect of injection pressure on the performance parameters such as brake thermal efficiency, brake specific fuel consumption, brake power and emission parameters such as HC, CO and NOX were investigated in a constant speed direct injection diesel engine with varied injection pressures of 180, 200 and 220 bar.The test results showed that Honge and Jatropa oil biofuel blends are having good performance and emission results at 200 bar injection pressure when compared to 180 and 200 bar injection pressure. The test results also showed that performance and emission results of Honge and Jatropa biofuel blends are near to that of the results obtained for pure diesel and they can be used to replace pure diesel. Keywords: - Performance parameters, Emission parameters, Biodiesel, Jatropa oil, Honge oil
Study of Performance of Different Blends of Biodiesel Prepared From Waste Co...IJMER
The use of biodiesel is rapidly expanding around the world, making it imperative to fully
understand the impacts of biodiesel on the diesel engine combustion process and pollutant formation.
Biodiesel was made by the well-known transesterification process. Waste cottonseed oil was selected for
biodiesel production. Three different blends of biodiesel were prepared i.e. B10, B20 and B30. These three
blends were fuelled in a compression ignition (C.I.) engine. A maximum of 77% biodiesel was produced
with 20% methanol in presence of 0.5% sodium hydroxide. Different parameters for the optimization of
biodiesel production were investigated in the first phase of this study, while in the next phase of the study
performance test of a diesel engine with neat diesel fuel and biodiesel mixtures are to be carried out. The
performance characteristics like brake power (B.P.), brake specific fuel consumption (BSFC) and brake
thermal efficiency. This performance was then compared with that of petro diesel.
Performance and Emissions Characteristics of a C.I. Engine Fuelled with Diffe...idescitation
In this research work, waste mustard biodiesel-diesel fuel blends as alternative
fuels for diesel engines were studied. An experimental investigation has been carried out to
evaluate the performance and emission characteristics of a diesel engine fuelled with waste
mustard biodiesel-diesel blends (10%, 15% and 20%) and important fuel properties have
also been determined. The performance parameters analyzed include brake power, brake
thermal efficiency, brake specific fuel consumption, and exhaust gas temperature whereas
exhaust emissions include unburnt hydrocarbons (UHC), carbon monoxide (CO) and oxides
of nitrogen (NO x). The results of the experiment in each case were compared with baseline
data of diesel fuel. Significant improvements have been observed in the performance
parameters of the engine as well as exhaust emissions. The waste mustard biodiesel-diesel
fuel blends were tested in a single cylinder direct injection diesel engine. Engine
performance and exhaust emissions were measured while the engine running at no, part and
full load condition. This paper investigates the scope of utilizing waste mustard oil blends
with diesel fuel. It concluded that B10 blend of waste mustard biodiesel act as best
alternative fuel among all tested fuel at full load condition. The objective of the present
research was to explore technical feasibility of waste mustard oil in direct injection C.I.
engine without any substantial modifications in the engine design..
PERFORMANCE AND COMBUSTION CHARACTERISTICS OF SINGLE CYLINDER DIESEL ENGINE F...IAEME Publication
The experimental investigation is made to estimate the combustion and performance characteristics of direct injection diesel engine using different blends of karanja methyl ester with diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel engine. The combustion parameters were found close to that of diesel. The blend of karanja biodiesel performed complete and smoother combustion process than diesel.
Performance and combustion characteristics of single cylinder diesel engine f...Er Sandeep Duran
The experimental investigation is made to estimate the combustion and performance
characteristics of direct injection diesel engine using different blends of karanja methyl ester with
diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume
and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel
engine. The combustion parameters were found close to that of diesel. The blend of karanja biodiesel
performed complete and smoother combustion process than diesel. The various parameters values
like brake thermal efficiency, and heat equivalent to useful work wererecorded nearest to diesel. The
fuel air ratio also recorded higher than diesel. Whereas the mean gas temperature for pure karanja
biodiesel was higher than diesel which is on account of complete combustion on account of 10-12%
fuel bound oxygen. On the basis of brake thermal efficiency, KB20 blend was found to be the best
blend.
Performance and combustion characteristics of single cylinder diesel engine f...Er Sandeep Duran
The experimental investigation is made to estimate the combustion and performance characteristics of direct injection diesel engine using different blends of karanja methyl ester with diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel
engine. The combustion parameters were found close to that of diesel.
EXPERIMENTAL ANALYSIS ON DI-DIESEL ENGINE RUNS WITH THE COMBINATION OF BLENDE...IAEME Publication
An experimental Study is carried out to study the performance and emission on direct injection, diesel engine run with Bio diesel (PaME), Diesel and ethanol blended fuel taking
conventional Diesel as base line. The test fuels (six) are pure Diesel, pure PaME, (95% PaME + 5%
ethanol in vol.), (80% Diesel+15% PaME+5% ethanol in vol.), (95% Diesel + 5% ethanol in vol.),and (80% PaME +15% Diesel +5% ethanol in vol.) respectively.
The experimental investigation is made to estimate the combustion and performance
characteristics of direct injection diesel engine using different blends of karanja methyl ester with
diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume
and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel
engine. The combustion parameters were found close to that of diesel. The blend of karanja biodiesel
performed complete and smoother combustion process than diesel. The various parameters values
like brake thermal efficiency, and heat equivalent to useful work wererecorded nearest to diesel. The
fuel air ratio also recorded higher than diesel. Whereas the mean gas temperature for pure karanja
biodiesel was higher than diesel which is on account of complete combustion on account of 10-12%
fuel bound oxygen. On the basis of brake thermal efficiency, KB20 blend was found to be the best
blend.
Effect of injection pressure on performance and emission analysis of ci engin...eSAT Journals
Abstract Gradual depletion of world petroleum reserves and increase in the exhaust emissions day by day have led to an urgent need for alternative fuels to replace diesel. Vegetable oils biodiesel is considered as an alternative for diesel because of their properties which have been close to pure diesel. In the present study non edible vegetable oils like Honge and Jatropha oils biodiesel and their blends were used as fuel in a constant speed direct injection diesel engine. Further effect of injection pressure on the performance parameters such as brake thermal efficiency, brake specific fuel consumption, brake power and emission parameters such as HC, CO and NOX were investigated in a constant speed direct injection diesel engine with varied injection pressures of 180, 200 and 220 bar.The test results showed that Honge and Jatropa oil biofuel blends are having good performance and emission results at 200 bar injection pressure when compared to 180 and 200 bar injection pressure. The test results also showed that performance and emission results of Honge and Jatropa biofuel blends are near to that of the results obtained for pure diesel and they can be used to replace pure diesel. Keywords: - Performance parameters, Emission parameters, Biodiesel, Jatropa oil, Honge oil
Study of Performance of Different Blends of Biodiesel Prepared From Waste Co...IJMER
The use of biodiesel is rapidly expanding around the world, making it imperative to fully
understand the impacts of biodiesel on the diesel engine combustion process and pollutant formation.
Biodiesel was made by the well-known transesterification process. Waste cottonseed oil was selected for
biodiesel production. Three different blends of biodiesel were prepared i.e. B10, B20 and B30. These three
blends were fuelled in a compression ignition (C.I.) engine. A maximum of 77% biodiesel was produced
with 20% methanol in presence of 0.5% sodium hydroxide. Different parameters for the optimization of
biodiesel production were investigated in the first phase of this study, while in the next phase of the study
performance test of a diesel engine with neat diesel fuel and biodiesel mixtures are to be carried out. The
performance characteristics like brake power (B.P.), brake specific fuel consumption (BSFC) and brake
thermal efficiency. This performance was then compared with that of petro diesel.
Performance and Emissions Characteristics of a C.I. Engine Fuelled with Diffe...idescitation
In this research work, waste mustard biodiesel-diesel fuel blends as alternative
fuels for diesel engines were studied. An experimental investigation has been carried out to
evaluate the performance and emission characteristics of a diesel engine fuelled with waste
mustard biodiesel-diesel blends (10%, 15% and 20%) and important fuel properties have
also been determined. The performance parameters analyzed include brake power, brake
thermal efficiency, brake specific fuel consumption, and exhaust gas temperature whereas
exhaust emissions include unburnt hydrocarbons (UHC), carbon monoxide (CO) and oxides
of nitrogen (NO x). The results of the experiment in each case were compared with baseline
data of diesel fuel. Significant improvements have been observed in the performance
parameters of the engine as well as exhaust emissions. The waste mustard biodiesel-diesel
fuel blends were tested in a single cylinder direct injection diesel engine. Engine
performance and exhaust emissions were measured while the engine running at no, part and
full load condition. This paper investigates the scope of utilizing waste mustard oil blends
with diesel fuel. It concluded that B10 blend of waste mustard biodiesel act as best
alternative fuel among all tested fuel at full load condition. The objective of the present
research was to explore technical feasibility of waste mustard oil in direct injection C.I.
engine without any substantial modifications in the engine design..
PERFORMANCE AND COMBUSTION CHARACTERISTICS OF SINGLE CYLINDER DIESEL ENGINE F...IAEME Publication
The experimental investigation is made to estimate the combustion and performance characteristics of direct injection diesel engine using different blends of karanja methyl ester with diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel engine. The combustion parameters were found close to that of diesel. The blend of karanja biodiesel performed complete and smoother combustion process than diesel.
Performance and combustion characteristics of single cylinder diesel engine f...Er Sandeep Duran
The experimental investigation is made to estimate the combustion and performance
characteristics of direct injection diesel engine using different blends of karanja methyl ester with
diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume
and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel
engine. The combustion parameters were found close to that of diesel. The blend of karanja biodiesel
performed complete and smoother combustion process than diesel. The various parameters values
like brake thermal efficiency, and heat equivalent to useful work wererecorded nearest to diesel. The
fuel air ratio also recorded higher than diesel. Whereas the mean gas temperature for pure karanja
biodiesel was higher than diesel which is on account of complete combustion on account of 10-12%
fuel bound oxygen. On the basis of brake thermal efficiency, KB20 blend was found to be the best
blend.
Performance and combustion characteristics of single cylinder diesel engine f...Er Sandeep Duran
The experimental investigation is made to estimate the combustion and performance characteristics of direct injection diesel engine using different blends of karanja methyl ester with diesel. The Karanja biodiesel is mixed with diesel in proportions of 20%, 50% and 100% by volume and studied under various loading conditions i.e. at No load, 25%, 50%, 75% and full load in diesel
engine. The combustion parameters were found close to that of diesel.
EXPERIMENTAL ANALYSIS ON DI-DIESEL ENGINE RUNS WITH THE COMBINATION OF BLENDE...IAEME Publication
An experimental Study is carried out to study the performance and emission on direct injection, diesel engine run with Bio diesel (PaME), Diesel and ethanol blended fuel taking
conventional Diesel as base line. The test fuels (six) are pure Diesel, pure PaME, (95% PaME + 5%
ethanol in vol.), (80% Diesel+15% PaME+5% ethanol in vol.), (95% Diesel + 5% ethanol in vol.),and (80% PaME +15% Diesel +5% ethanol in vol.) respectively.
Experiments were carried out to study exhaust emissions of diesel engine with low heat
rejection (LHR) combustion chamber with ceramic coated cylinder head [ceramic coating of
thickness 500 microns was done on inside portion of cylinder head] with different operating
conditions [normal temperature and pre–heated temperature] of waste fried vegetable oil based
biodiesel with varied injector opening pressure and injection timing. Conventional engine (CE)
showed deteriorated performance, while engine with LHR combustion chamber showed improved
performance with biodiesel operation at manufacturer’s recommended injection timing of 27o bTDC
(before top dead center) and injector opening pressure of 190 bar. The optimum injection timing was
31o bTDC for CE while it was 30o bTDC with engine with LHR combustion chamber with biodiesel
operation. Smoke levels decreased, while nitrogen oxide levels increased with engine with LHR
combustion chamber its optimized injection timing in comparison with pure diesel operation on CE.
PERFORMANCE AND EMISSION CHARACTERISTIC OF DI DIESEL ENGINE WITH PREHEATING C...IAEME Publication
In this experimental investigation, the corn oil methyl ester (COME) was prepared by transesterification using corn oil, methyl alcohol and potassium hydroxide (KOH) as a catalyst. The fuel properties of bio-diesel such as kinematic viscosity and specific gravity were found within limited of BIS standard. At different preheated temperatures of COME, the performance and exhaust emission characteristics of a diesel engine fuelled with preheated bio-diesel were obtained and
compared with neat diesel.
STUDIES ON EXHAUST EMISSIONS FROM CERAMIC COATED DIESEL ENGINE WITH WASTE FRI...IAEME Publication
Experiments were carried out to study exhaust emissions of diesel engine with low heat
rejection (LHR) combustion chamber with ceramic coated cylinder head [ceramic coating of
thickness 500 microns was done on inside portion of cylinder head] with different operating
conditions [normal temperature and pre–heated temperature] of waste fried vegetable oil based
biodiesel with varied injector opening pressure and injection timing. Conventional engine (CE)
showed deteriorated performance, while engine with LHR combustion chamber showed improved
performance with biodiesel operation at manufacturer’s recommended injection timing of 27o bTDC
(before top dead center) and injector opening pressure of 190 bar.
STUDIES ON EXHAUST EMISSIONS OF CERAMIC COATED DI DIESEL ENGINE FUELLED WITH ...IAEME Publication
Investigations were carried out to study exhaust emissions of a low grade low heat rejection (LHR) diesel engine with ceramic coated cylinder head [ceramic coating of thickness 500 microns was done on inside portion of cylinder head] with different operating conditions [normal temperature and pre-heated temperature] of cotton seed biodiesel with varied injector opening pressure and injection timing
EFFECT OF ADDITIVE AND RAW RUBBER SEED OIL MIXTURE IN A BIODIESEL IAEME Publication
The main advantage favouring biofuels is that they are biodegradable and thus do not cause harm to the environment. Department of Energy study showed that the production and use of biodiesel, compared to petroleum diesel, resulted in a 78.5% reduction in carbon dioxide emissions The present study aims to investigate the importance of additives in biodiesel blends. Here DEE (Diethyl ether) used as the additives. The main aim of this study is to analyse the effect of compression ratio on the performance and emission of blends of biodiesel with and without using additives. The test has been conducted on three different fuels blends on a single cylinder VCR (Variable Compression Ratio Engine) DI diesel engine at a compression ratio of 16. The performance parameters include BTE, SFC, BP, Volumetric Efficiency and Mechanical efficiency. The exhaust gas emission is found to contain CO, HC, NOx and CO2.The three different fuel blends are 1) standard diesel 2) 20%Jatropha biodiesel, 3) diesel+20%Jatropha+5%DEE+ 3ml raw rubber seed oil. The result of the experimental works has been compared with standard diesel and it concludes considerable improvement in the performance parameters, as well as exhaust emissions.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
PERFORMANCE AND EMISSION STUDY OF WASTE PLASTIC OIL AND DIESEL BLEND IN D.I. ...IAEME Publication
The present work is carried out to evaluate the fuel qualities and adaptability of waste plastic oil as an alternative fuel for CI engine. The blends used for this study were D100and D90WPF10. The physico-chemical properties of these samples were analyzed and found that it has almost similar
properties to that of diesel and waste plastic oil –blends was also tested as a fuel in a D.I. diesel engine and its performance characteristics were analyzed and compared with diesel fuel and it is found that the blend of 10% waste plastic oil with diesel can be good substitute for diesel engine in
near future.
Similar to Performance and emission characteristics of di ci diesel engine with pre (20)
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.